We design and engineer superior quality pumping set that are used for fresh water irrigation. Our range of pumping set are made from quality material that ensures durability and reliability to our products. These pumping set are known for high performance under all the given conditions.

We offer engine cooling parts for engine cooling systems
*complete water pump assembly
Further to your exclusive requirement, we offer
* water pump repair kits for these water pump assembly.

PMC pumps with jet fitting are connected to the high pressure jetting hose with the jetting pump that creates the set-up for lsquo;jetting inrsquo; the well points. The ldquo;Ordquo; Ring equipped with the jet fitting provides a leak free pressure connection of the well point and riser pipe to the jet pump.These fittings can also be customized as per the specification given by the clients.

Our polder pumps are suitable for lifting water from canals and river beds, dam sites, disposal of waste water. The construction of the polder pump is of pump below, and motor above, type and suction inlet is at the bottom, so that water is pumped from the lowest level. The polder pump is driven by water filled submersible electric motor, squirrel cage induction type and the water acts as a lubricant in the motor and keep it cool. The motor is protected against the contamination from surrounding water by mechanical seal. All parts are made from specially selected material so as to suit high abrasion and corrosion. The polder pump can be easily installed in vertical, horizontal or inclined position. It is portable pump easily shifted to alternative site for re installation and withdrawal of the unit as well as replacement of normal wearing parts on site with minimum labor. The polder pump is one or two stage, available in all material except that soft metal. such as lead or

We have range of water pumps for all type of diesel engines.

PMC water ring vacuum pumps we manufacture are appreciated for their host of qualitative features. These are available in two sizes PM-l and PM-2 and are widely applicable in the following areas:

We manufacture a wide assortment of PMC well point dewatering systems that are used to remove excess of water from saturated soil mass which is called for to make working easier in wet conditions and possible below natural water level. The entire range is designed using qualitative raw material sourced from reliable vendors.The PMC well point dewatering systems are effectively used in the soils that have sand contents of about 20% or more.The PMC well point system has been proved most effective way of Dewatering for many types of civil works such as:

ConstructionSubmersible motor pumps for deep wells of 6" (DN 150mm) Sized for connection to the motor according to NEMA standards. Delivery casing with built-in non-return valve. Impellers : Radial flow impellers. J9,J12,J15,J17,J19,J21,J24,J27,J10H,J13H,J16H,J18H. Mixed flow impellers. W30,W46,W60. Connection : Screwed pipe connection. Application For water supply.For irrigation.For civil and industrial applications.For fire fighting application.Performance RangeHead range up to 750 meters. Flow range up to 78 msup3;/h. Operating condition Water temperature up to 45deg;C.Max. Sand quantity into the water : 50 g/msup3;.Max. Starts per hour : 20 at regular intervals.Direction of rotation : Clockwise as seen from the pump coupling side.Special Construction on requestAlso available in AISI 316 Material.]]> Thu, 6 Nov 2008 04:12:03 EDT Water Pump http://www.indiamart.com/waterforcepump/stainless-steel-pumps.html 10716402

We undertake Supply Installation of Pumps for different Application in vivid Industries such as Mining, Chemicals and Pharmaceuticals and sectors such as Sewage water treatment, Power generation, Marine and Mining. Our pumping solutions include Dewatering land draining Pumps, which have the following features: