We offer electronic tensile strengt tester that includes tearing strength tester. The details are given below :Tearing Strength TesterUsed to determine the ballastic tearing strength and work factor of fabrics by Elmendorf method, supplied with calibration weights and augmenting mass to test up to 6400 grams.Standard Ranges available:

Bursting strength tester is used to test bursting strength of any material such as fabric, leather, etc. Digital bursting strength tester and digital pneumatic bursting strength tester, under multi -directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm. We also offers digital seal strength tester, digital bursting strength tester and digital pneumatic bursting strength tester.

Tensile Testing Machine is used for wide variety of materials for their tensile strength and elongation. The materials include wires, cable, plywood, conductors, ferrous and non- ferrous materials, cloth, fibers etc.

The machines are manufactured in various capacities and test appropriate traverse speed and using suitable grips in conformity with ASTM, DIN, BIS, and BSS standards.

These machines are fitted with over-travel safety switches suitable for 230 V AC supply.

This is a Single-Column generic Tensile Testing machine which can be designed to perform any or all of the following tests with high accuracy :

We manufacture superior quality tensile testing machine (model-1.5 GR) which are based on latest technology. Our testing machines are widely used to measure the tensile strength of various metals and material such as mild steel, plastics, ply wood and others. Our range is available in various models such as GR 1041, GR 1041 A, GR 1042, and a lot more.

Tensile strength tester is used to determine the tensile strength of the fabric. These are available in accordance to the International standards. Standard Features includes:

#149; Capacity of the tester : 0-2500N (250Kg) or 0-500Kg/0-500N
#149; Sensitivity : 50 and 100gms
#149; Speed of the tester : can be 50,100 250 or 300mm per minute as required.
#149; Minimum grip Separation : 25mm
#149; Minimum grip Separation : 750mm
#149; Motor : 1/4hp. Single phase 220v, 80rpm AC
#149; Power consumption : 1 Kw

Related Standard:

#149; BS-1610, BSES-10023, ASTM-E-4, DIN-5122/1

Materials like paper, Paper boards, corrugated boards and boxes, solid fibre boards, filter cloth, industrial fabric, leather, rexine, etc.

Features: Facility to adjust cling pressure

Tensile Tester for fabric (Model HF) and ROPE (Model HR)An electrically operated floor mounting machine for determining the tensile strength and elongation of fabric (model HF) and ropes (model HR).Available in the following capacities:

We offer HL692 series of universal testing machines that confirms to the testing procedures laid down in BIS , EN , ASTM and JIS standards. These are used for testing of engineering materials like metals, plastics, elastomers, papers and many others in compression and tension mode.

Further, our range is designed with one pillar for the loading units up to the range of 5 kN and two pillars for ranges above 5 kn. Our range also have ball screw driven through the highly sensitive servo motor. The rate of loading for testing is controlled by the computer and has step less loading with the rate of strain varying from 0.01 #150; 500 mm/min. Moreover, the setting of our range can be done at the speed of 1000 mm/min or more.

Apart from this, our system comprises of electromechanical load frame with data acquisition control unit, software package, load cell, displacement transducer, a set of grips/jaws, standard computer. In addition to this, our machines also possess the following:

Digital Bursting Strength Testerh Tester is highly accurate and gives high levels of repeatability and consistency in results.

Bursting Strength Tester is user friendly and it#39;s ease of operation makes it a highly acceptable standard equipment. A highly recommended equipment for all quality conscious labs.

Features :

* Single push-button operation
* High Precision Digital Read-out


Readings are displayed digitally with least count of 0.1 kg/cm2

Suitable for:

Seal Strength / Breaking strength

Pull out strength / Yield point

Tearing test

Elongation measurement

Rupture point

Peeling test


Digital Tensile Strength Tester for plastic, rubber metal is based on the Constant Rate of Traverse (CRT) principle. The sle is held between two jaws, the upper one is a stationary jaw while the other end is made to move at a known fixed speed with the help of Motor, Gear Box and Lead Screw arrangement (75mm or 300mm per minute). The load exerted on the Stationary jaw is sensed by a sensor connected with load cell, which directly indicates the load in Digital form in kgs. The Elongation is digitally displayed. We also provides box compression tester, digital seal strength tester, destructive testing machines, carbon black content apparatus and carbon black dispersion test apparatus.

Our tensile testing machines are electrically operated and are used for determining the tensile strength and elongation of various materials like rubber, plastic, paper, wires, chords etc. These machines are manufactured in various capacities and test appropriate traverse speed and using suitable grips in conformity with ASTM, DIN, BIS, and BSS standards. It is fitted with over-travel safety switches suitable for 230 V AC supply. This machine is available in analogue as well as digital models and with the capacity of 100kg to 5 ton.

We manufacture and supply Tearing Strength Tester by using high quality raw materials. It is checked at each stage from designing till final product development to ensure the quality. This tester is used to determine the ballistic tearing strength of textiles.