 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Electronics & Electrical > Passive Devices >
Wire Wound Resistors
Products - 59
|
Wire Wound Resistors |
Displaying 1-31 of Total 31 Products Found |
Products
We have come up with an economical grade of wire wound resistors - CCV Series that are specially designed for space saving on PCB’s. These resistors are constructed to vertical mounting ceramic stand offs and thus deliver high power. The specifications of these wire wound resistors are as follows: Dimensions (in mm) more...
A electrical resistors is a two-terminal electronic component designed to oppose an electric current by producing a voltage drop between its terminals in proportion to the current, that is, in accordance with Ohm's law: V = IR. The resistance R is equals to the voltage drop V across the resistor divided by the current I through the resistor.
The various types of electrical resistors are:
more...
We offer ISO 9001 certified, fixed wire wound resistors that is widely used in various electrical industries. Our range is offered in radial and axial type, silicon coated and ceramic type. Our fixed wire wound resistors are available in:
Power Ceramic Encased (SQP):
more...
CAH series is a professional grade Aluminum housed wire wound resistors with a screw mounted chassis to enhance heat sink effect & complete environmental protection. Non-inductive type, very low ohmic values are also available.
We have in store for our clients, a wide range of wire wound resistors - CVF series that is encased in slim ceramic case and provided with NCR ribbon element. Available in customized values and test parameters as per customer specifications, our CVF series hold the following features and technical specifications: • Super heat dissipation • Lower temperature co-efficient • Low inductance • Flame proof & non combustibles • Standard tolerance: 5% Dimensions (in mm) more...
CSFR series is a high power wire wound industrial grade resistors up to 1200 W. Most suitable for load bank, high stabilty, flame proof silicon coated. Non Inductive. Custom built mounting brackets are available. Multi- terminal types and adjustable types are also available.
CSIA series is a high grade Ni-Cr wire wound element on ceramic core, coated with non-corrosive high insulating flame retardant material.Aryton-Perry winding ensures low inductance. CCA series is encased in Ceramic cases suitable for printed circuit board mounting.
CCV series is a vertical mounting ceramic stand off for space savings on PCB's.
CCT series is a terminal stand-off height which are adaptable to wave soldering.
CVF series is a Low inductance Ni-Cr ribbon element encased in a slim ceramic case. more...
We are instrumental in offering our clients with an industrial grade assortment of high power wire wound resistors - CSFR series. These resistors are fabricated using tin plated copper or brass and are coated with flame proof silicon for making them highly stable. The superior heat dissipation capacity of these wire wound resistors makes them most suitable for load banks. The technicalities of our CSFR series are as under: Dimensions (in mm) more...
We bring forth for our clients, a professional grade range of aluminum housed wire wound resistors – CAH series that provide complete environmental protection in its application. These resistors are provided with screw mounted chassis for enhancing the heat sink effect and low temperature coefficient for better stability. Available in the standard tolerance of 1 %, 2% and 5%, these aluminum housed wire wound resistors are offered to our clients in the following specifications: Dimensions (in mm) more...
Available with us, is a high grade assortment of wire wound resistors - CCA Series that is designed using Ni-Cr wire wound element on ceramic core. Encased in ceramic and sealed with flame proof silicon cement, these wire wound resistors are offered in the standard tolerances of 1 %, 2% and 5%. Following are the features and technical specifications of our CCA series: • Super heat dissipation • Lower temperature co-efficient • Flame proof • Non combustible • High surge withstanding capability • High Ohmic values with MOR element Dimensions (in mm) more...
We offer wire wound resistors in RE-B series. Flame proof coated, these fuse able resistors are available in between 1 watt to 15 watt and tolerance levels between ±5% to ±10%.
Specifications:
• 1 Watt to 15 Watt
• Range :0.01Ω to 10KΩ
• Tolerance : ±5% to ±10%
• Flame Proof Coated
• Fuse able Resistors
We offer wire wound resistors in RE-A series. Flame proof coated, these are available in between 1 watt to 15 watt and tolerance levels between ±1% to ±10%.
Specifications:
• 1 Watt to 15 Watt
• Range :0.01Ω to 20KΩ
• Tolerance : ±1 % to ±10%
• Flame Proof Coated
We offer wire wound resistors in REC-H series. Axial lead ceramic cased, these are available in between 1 watt to 15 watt and tolerance levels between ±1% to ±10%.
Specifications:
• 1 Watt, to 15 Watt.
• Range:0.01Ω to 30KΩ
• Tolerance : ±1% to ±10%
• Axial Lead Ceramic Cased
We offer wire wound resistors in REC-J series. Coming in boat type radial tags, these are available in between 5 watt to 20 watt and tolerance levels between ±1% to ±10%.
Specifications:
• 5 Watt to 20 Watt
• Range :0.01Ω to 30KΩ
• Tolerance : ±1% to ±10%
• Ceramic Cased
• Boat Type Radial Tags
We offer wire wound resistors in REC-E series. Featuring radial lugs with taps and adjustable mounting hardware, these are available in between 10 watt to 1000 watt and tolerance levels between ±1% to ±10%.
Specifications:
• 10 W to 1000 W
• Range : 0.1Ω to 100KΩ
• Tolerance : ±1% to ±10%
• Silicon Coated
• Radial Lugs with taps
• Adjustable with Mounting Hardware
Silicon Coated Adjustable Resistors more...
We are specialized in supplying superior quality wire wound resistance.
The resistors are a two terminal electrical and electronic component which resists an electric current by producing a voltage drop. We offer a wide range of resistors (CFR/MFR/Wire Wound) to our clients which are specially imported from the most famous manufacturers in the market. These products follow all the international standards like ERTL, NPL and ISO, which make them highly performance oriented and useful for our clientèle.
Application: In the circuits of many electrical and electronic devices like T.V, Radio etc. more...
specific name: fechral wire wound flat type element
this type of wire wound element has a white zinc plated m. S. Flat with dimensions 300x100x2. 5mm. Grooved insulators is fixed on both sides of the former. Fechral wire is wound closely on the grooves. Lug terminals are provided on both ends of the former. Lug terminals are also provided in between end terminals to serve the purpose of tapping. Some of the features are: more...
VEPL make WWR of various power ratings from 2W to 500W. Also our Principals offer Import substitution Resitors and custom design Products
4 1 W to 17 W·
4 Range 0.01W to 27kW
4 Tolerance 1% to 10%
4 Axial Lead
4 Ceramic cased more...
We are into the manufacturing of superior quality Coated Wire Wound Resistors which are used to wind the resistance wire on alkali-less ceramic core coated with non-corrosive and high insulating heat proof material. Features : • Super heat dissipation • 0.50 W to 5.0 W • Range 0.1 to 470 • Tolerance 2% & 5% • Grey body color • Excellent flame resistance • Small linear temperature coefficient • Instant overload capability • Low noise figure without annual shift on resistance value more...
We are a leading name in supply of Power Wire Wound Resistors, which offer low cost and higher durability to clients. These resistors have got varied number of features and are available in a wide range starting from 0.01 to 100K. Features : • 10 W to 200 W • Small in size but capable of carrying high power load • Unchanged resistance value even after long use • Good resistivity to short time overload more...
Radial Leads Resistors more...
4 5 W to 20 W·
4 Range 0.1W to 56kW
4 Tolerance 1% to 10%
4 Ceramic cased
4 Axial Leads more...
4 Precision Resistors
4 0.25w to 2w.
4 0.1W to 100kW.
4 Tolerance 0.01% to 0.5%.
4 Silicone Coated.
4 Axial Lead. more...
Boat Type Resistors more...
Ceramic Cased Resistors more...
4 25 W to 100 W·
4 Range 0.01W to 10kW
4 Tolerance 0.5% to 10%
4 Silicone Coated more...
4 6 W to 200 W·
4 Range 0.01W to 100kW
4 Tolerance 0.5% to 10%
4 Silicone Coated and open type
4 Screw coupling more...
Oval Type Resistors more...
Category Matches
Related Trade Leads
|
|
Looking to sell wire-wound potentiometer, advanced wire-wound
potentiometer. Also manufacture precision conductive plastic
potentiometer, precision... (Sell) |
Tender Notifications
B2B Newsletter Subscription
