 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Dyes & Chemicals > Paints, Powder & Varnishes >
Waterproof Coatings
Products - 96
|
Waterproof Coatings |
Displaying 1-50 of Total 96 Products Found |
Products
Ridex Weather Safe is a polymer based single component, U.V. resistant, heat retardant elastomeric film forming waterproofing breathable eco-friendly compound.
Usage as :
a) Water-proofing system on any masonry surfaces e.g. China mosaic, I.P.S., plaster, R.C.C. slabs, etc.
b) Heat retardant & water proofing primer/base coat before painting.
c) Protective and waterproofing coating on balcony lops, chhajas, parapet walls, domes or any other masonry structures.
d) Protective & waterproofing coating on external sides of air conditioning plants water storage tank.
e) Anti corrosive & heat reflective insulation on G.I. / C.I. pipe lines.
f) Heat reflecting water proofing system on roofs e.g. R.C.C. slabs, A.C. sheets, corrugated G.I. sheets, timber or plywood, etc.
Advantages :
1) Eco friendly breathable water based non-hazardous formulation.
2) Single component, hence easy to use.
3) Increases air conditioner efficiency & reduce power more...
Our organization is engaged in offering an extensive range of Waterproofing Systems for industrial as well as domestic purposes. Our waterproofing systems are applied for crack filling, expansion, construction joint filling, terraces and sloping roofs. Further, these are effectively used in arresting leakages and dampness from walls and protecting exposed structural surfaces.
Applications
more...
Teflon® /Fluoropolymer /ECTFE (Halar)/PTFE/PVDF/FEP/PFA Thick Coating- Blion
BLIONTM-A pinhole free homogeneous thick coating of PVDF (KYNAR), FEP, PFA, ETFE, ECTFE (HALAR). It has the extraordinary chemical resistance on chemical equipments parts. Any articles of intricacy shape can be processed. Thickness from 500 to 1000 microns. Any articles of intricate configurations can be processed.
Properties: more...
MAK CRETE - Acrylic Based Water Proofing Compound Mak Crete is an acrylic based polymer modified cementitious water proofing system. The MAK CRETE polymer , when mixed with cement will provide the unique solution to all problems related to water leakage and it protects from severe fungus ,salt penetration, or environmental attack in the following structures.
MAK PLAST Mak Plast is cold applied bituminous compound consist of bitumen, resinous oils and suitable fillers to form a smooth and homogenous paste in compliance with IS : 1580-1969. Mak Plast is recommended for water proofing of porous masonry, concrete floors, wall and roof. Makplast is used for caulking purpose for cervices and vertical joints between plates, folded sections , wood joints etc more...
CONPRO EP-8 is a two component, epoxy based waterproofing compound. After mixing both the components , it can be thinned down with water. In cured condition, it is hard, tough, abrasion resistant material. It is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water .One of the major advantage of CONPRO EP-8 over solvent based epoxy is that it can be applied on damp surface also. Being free from solvents , it does not pose any health hazard to the applicator.
Saans Therm is a high technology membrane coating specially formulated to prevent heat transferring and permeating into a building or installation, when applied on the external surface. Saans therm products are marine grade coatings with very high performance against weathering, waterproof & anti-carbon. There is no need to repaint after a building is coated with 'Saans Therm' as it comes in a pleasing range of modern and attractive colors.
Saans Therm is a unique silane siloxane aliphatic urethane resin blend solvent based coating (The resin system used in Saans Therm is already very successful and popular in India being used in Gripper paints by far the longest lasting and most durable exterior paint known to India. It can be virtually applied on, large variety of surfaces such as asbestos, metal, concrete, brick, tiles etc., Slightly more viscous than industrial paint, it can be applied by airless spray, brush or roller.
Saans Therm more...
Our extensive spectrum of water proofing coating is formulated using supreme quality chemicals. We offer our gamut to various industries and following are salient attributes: more...
The Orchid's rain guard that we offer are efficient water repellent coatings for Masonry structures. These water repellent coatings is used as a top coating surface treatment in all kinds of buildings to impart water repellent and reduce water absorption. Further, our range can be applied over all paints including cement paints, distemper, acrylic paints etc. Our range can also be used on all masonry substrates, bricks, sandstone and limestone etc. Further, our range can be applied using brush / roller / spray on the surface to be treated.
Benefits:
more...
Ridex OR is an excellent waterproof coating agent for Glazed china chips or I.P.S. finished surfaces!
Many times it happens that when the monsoon is at the doorsteps, water proofing becomes inevitable, but is not possible to carry it out in conventional way, due to many reasons like :
a) Lack of time
b) Lack of funds
c) Lack of awareness about the bad shape of terrace surface, etc.
This is when Ridex OR waterproof coating agent comes in handy due to its non invasive, economical, fast yet reliable application!
Description :
Ridex OR is a solvent based system, having Melaminc, Silicone & Acrylates as active ingredients. It can be easily applied with brush or sprayed on clean & dry surface to achieve a water proof & highly hydrophobic surface. The best feature of Ridex OR waterproof coating agent is that no invasive methods like chiseling or breaking or V grooving is required.
Coverage : (A) On glazed china chip surfaces : About 100 to 110 Sq. Ft. more...
MAK KOTE In application where heating of Bitumen at site is not possible, and where handicaps of wet surfaces have to be overcome, waterproofing can be done by using Makkote.
MSRB Compound M.S.R.B Compound is a bituminous adhesive in the form of an emulsion of brushing consistency. M.S.R.B Compound is recommended for the fixing of Expanded Polystrene (Thermocole. It is suitable for use in cold storage too, to ensure good adhesion to walls and ceiling and may also be used for sticking Thermocole section used for the insulation of refrigeration pipe work. more...
Conpro WP -2 is cement based two component modified acrylic copolymer emulsion, Conpro WP -2 provide waterproofing coating, capable of resisting ground and back water seepage at negative pressure.
We offer clients a wide range of waterproofing solutions in powder form. These are available under three brand names – Eagle, Stop It & Sealex. Featuring ISI certification, these come in cream color and with hydro replants base. To achieve optimum results, it is mixed with cement to achieve leakage proof and seepage proof end results.
Shalimax decorative waterproof cement paint is an exterior coating made in powder form with Portland Cement as its base. We offer clients a wide range of waterproof cement paint solutions for meeting the exterior waterproofing demands.
Advantages
• Provides a durable, hard & waterproof surface
• Does not rub, flak or peel off when applied as per instruction
• Hygienic and resistant to climatic changes
• Easy to use
• Excellent heat and light reflector
• Ideal coating for exteriors of houses, factories etc
• Available in myriad shades
Note : Darker shades are liable to fade / fleet once recommended for interiors.
Surface Preparation
Care has to be taken & seen that all surfaces are free from dirt, dust lichen, algae, etc. Loose material and dirt needs to be removed by brushing and where necessary by washing. All surfaces in hot climatic has to be saturated with more...
We manufacture a complete assortment of Premium Quality Epoxy Flooring, Wall Coating and epoxy floor coating Systems those provide Functional Solutions for Dust-free Clean room, Antibacterial & Stain-resistant Hyigenic OT/ITU, Food Grade, Antistatic, Conductive, Heavy-duty Industrial Impact Resistance, Industrial Hard Flooring, Strong Chemical Resistance and so on. Products include Solvent free and Waterborne Epoxy Systems. Features: more...
AQUA CRETE is a single component, SBR based polymer consisting of polymer and liquid additives. It can be used as a waterproof membrane for terraces, balconies and roof slabs. It accommodates limited crack movement in underlying surfaces. It develops an excellent bond to most building material hence becoming a part of concrete repair.
Primer Application : more...
We are
processing a qualitative Water Repellent solutions, which is Water-dilutable Silicone
based solution and available in yellow color. It is available in 50 and 200 kg
drums and to facilitate our clients we can also provide samples in 100 &
200 ml bottles.
The
products is widely used as an Additive for clays, ceramics, starches, latex
paints, Mixed with sodium silicate for use as a binder in pigmented paints, Making plastered surface water
repellent and many other applications.
Applications:
more...
BRUSH SEAL is a specially developed waterproofing coating that can be simply painted on the surface to be made waterproof. This is made from Oxidised Bitumen and Synthetic Resins which gives it durability. Its unique features are: more...
Seal Coat is environment
friendly water-based protective coating. Seal Coat on application
forms excellent film over the surface with good adhesion. It gives on
the spot sealing of all minor & major cracks instantaneously. It
penetrates inside the pores & takes the shape of the cracks. The
film of Seal Coat is very highly flexible, crack-free, non-tacky,
light fast, resistant to ageing, heat-sealable, odorless and
tasteless.
Features
more...
'Aquaproof SK-02' is a unique product developed and manufactured by SK Formulations to prevent the leakages & seepages from the upper slab of Toilet / Bathroom / Washing Area & Terrace slab.
Function- Single component, air drying, waterproofing coating for horizontal surfaces like Terrace slabs, Toilet Blocks, Bathrooms & Washing Area.
Chemical Composition - Grafted Co-polymer
Colour - Light Grey
Features more...
Our extensive array of waterproofing coatings holds the following distinct features and advantages:
more...
Our range of auto refinish products include the following: more...
BRUSH SEAL is a specially developed waterproofing coating that can be simply painted on the surface to be made waterproof. This is made from Oxidised Bitumen and Synthetic Resins which gives it durability.
Its unique features are: more...
We hold specialization in offering clients complete water proofing solutions both in form of services and products. Our extensive process expertise & use of advanced process tools helps us to deliver optimum solutions at competitive costs.
These internationally used, time tested range of waterproofing coatings, liquid membranes and self adhesive waterproofing membrane and water replant are extensively used in water- proofing applications in the construction sector.
Range & Usage:
more...
We offer insulmix paints which are used for exterior coating of terraces and buildings. These insulmix paints are also used in coating ovens & furnaces, mobile houses, freezer vans, etc. These paints have excellent waterproof, thermal insulation and elastomeric properties. These paints can be used to provide sufficient thermal insulation and waterproofing.
We patch, caulk, and seal all surfaces with a rubberized Elastomeric coating giving you waterproof protection guaranteed for up to 10 years. Elastomeric coatings offer superior weatherproofing for gravel aggregate, concrete, concrete block and brick. It effectively seals pinholes, surface irregularities and small cracks that allows leaking. Since the coating expands and contracts with changes in temperature it is not subject to cracking. Will totally eliminate water absorption or penetration. The finish is attractive and offers both beauty and protection. It is resistant to ultraviolet radiation and effective at filling and bridging small cracks and imperfections. Elastomeric coatings tend to be more expensive than paint but they can save lots of money over time when dealing with problem areas where their use is indicated. more...
Deterioration of structures due to seepage and leakage is a major problem prevalent through out the country. Dampness in buildings, caused by the ingress of moisture through its components, not only shortens its life span but also creates unhygienic conditions for the occupants. Besides, it involves expensive repairs for rectification. Thus, it is imperative that this burning issue gets utmost attention of the Engineers and Builders and is tackled effectively on ground. Hence, the age-old dictum of “Prevention is Better than Cure” aptly applies here. The need of the hour, therefore, is to evolve economical solution to this vexed problem. To overcome the same, we at Automotive Solutions have launched an product named ‘AS BOND which has been effectively used for New Construction right from Construction Stage onwards (Basement, Foundation, DPC, Jointed concealed water pipes and more...
We offer chemical based waterproofing coating services to our clients. Different types of coatings that we offer comprises polymer modified cementious coating, epoxy coating and bituminous polyurethane coating. Our accuracy and experience in waterproofing coatings offer various advantages that encompass: more...
Waterproof Cement Paint more...
Structure Guard (white & Grey) 100% water profing polymer based coating (Ready to use). We are engaged in offering a wide range of LBC structure guard that are appreciated by our esteemed clients. These are abrasion resistant and are offered with a self-curing brush. Our range is also known as a component, polymer, cementations, concrete and masonry coating that can make a strict waterproofing for resisting chloride ion penetration and structure guard. Our range is durable and is used in the following areas: more...
We provide our customers with efficient waterproofing which is specially formulated white coloured water based primer which is very useful for waterproofing of old and new built roofs. Some of its application area are:
• Water proofing balconies
• Water proofing terrace
• Water proofing gardens more...
We provide premium quality coat primer, wall coat, waterproofing membrane coating, waterproof coatings, wall sealant and many more in our hospital and cleanroom sterile finishes. Our range is widely used across various applications forthe following properties such as:
more...
They are a two pack clear aliphatic polyurethane coatings which have applications in various fields like providing an excellent adhesion substitute to concrete, floor, metal, paper, wood, textile, leather, plastic etc. The coating has a very good UV resistance and are hence durable. They find an applications as a top coat on various substrates. We provide various options in polyurethane coatings to our clients :
Alprothane 130 C
more...
Our water repellent coatings are
formulated using premium grade chemicals as raw material. This used
in construction works to offer resistant against high alkalinity and
other special features. Our range comprises of the following:
VITCON 2010 [Water Repellent
Coating]
Our water repellent coating VITCON 2010
is a colorless water repellent micro emulsion based on
silane-siloxane. Some of the salient features of this water repellent
coating include the following:
more...
We offer CED coating for metallic components, which is superior to powder coating and liquid painting. Metallic components having this type of coating have better finish and higher durability. This coating system is absolutely free from lead, tin and chrome( as compliance to the ROHS), hence it is non hazardous in terms of health and environment.
Water proof coating offered by us has remarkable ability of energy saving by combining the functions of heat insulation & water proof quality. Further, under strong sunshine, the temperatures of film surface can be lowered by 160.
Usage:
Widely used in balconies, thermo - insulated metallic tiles, pipelines, and tanks, these are used to protect cement, concrete floors and asbestos tiles from: more...
Single component,elastomeric waterproofing cum insulation coating.Can be used on terraces & walls to reduce surface temperature from 7 to 14 degree.Reduces AC loads,thus saving in electricity bills.
Epoxy flooring is useful in many industries like
manufacturing industry, engineering industry and is widely used in shopping
malls, big hotels etc. It is abrasion resistant and has a very good finishing
look.
These epoxy flooring are available in all major colours
like gloss and mat finish. The self levelling epoxy flooring is from
500 micron to 2MM and more thick . The top coat epoxy flooring will be around 350 micron thick
Benefits:
more...
We offer Zycoprime which is a kind of special Waterproof Coating used to ensure proper wetting & bonding of tiles or cement joints or plastering.
Application of Zycosil creates a water repellent surface. Wetting and bonding of any cementitious mixture on this surface is difficult. To ensure proper wetting & bonding of tiles/ cement joints/ plastering, Zycosil treated surfaces will need a bonding agent. ZYCOPRIME forms a fine film on Zycosil treated surface. This helps the adherence of cement & sand/ gravel mixtures on this surface.
Application Procedure : more...
CEMACRYL is high performance waterproofing coating based on modified acrylic emulsion polymer. This is dual purpose product which can be used directly as waterproofing coating OR also to modify cementitious mortars and plasters to make them waterproof. When added to plasters and cementitious mortars, CEMACRYL improves their waterproofing ability, their ability to bond to concrete, masonry and wood, improves their flexural strength, impact resistance and abrasion resistance. When applied as waterproofing coating, CEMACRYL gives excellent results for roof top slabs, water tanks, swimming pools, sunken slabs & any other wet slabs / retaining walls etc.
Important information for our buyers:
Usage:
Use as water barrier under brickbat coba and on sunken slabs (toilets / wet areas) as undercoat below mortars. Use also as water barrier paint on vertical external walls.
Preparation: more...
Fin
Coat is Waterproof scratch resistant clear coat. Fin coat provides
water proofing bacteria free, UV resistant, coating for finishing of
wooden furniture (water based PUD with matt & gloss finish). Fin
coat is environmentally friendly coating material with a base of
water based Polyurethane dispersions. It can be thus used for all
green furniture and buildings. Fin coat is flexible, non-tacky, light
fast, resistant to ageing, heat-sealable, odorless and
tasteless.
Specification:
more...
Our assortment of industrial heat reflective coatings is developed with high reflectivity. We ensure that our professionals adhere strictly to all the industry set rules and regulations. To make it more specific to our clients’ requirements, we also offer customization in accordance to our clients’ requisites.
Following are some of the features of our Industrial Coatings: more...
Waterproof Coatings and Waterproofing Solutions from VIBGYOR POLY-COATS come with a whole new approach of minimized Life-Cycle Cost. The approach is fulfilled with immaculate quality of Products combined with differentiated system specifications & latest world-standard techniques. VIBGYOR POLY-COAT Waterproof coating system goes deep into providing classy performance along with minimum disturbance, waste & pollutants to the occupants and surroundings. The range covers right from New RCC Roof Waterproofing up to Load-free Waterproofing on old porous Lime-terrace. Even in standalone cement modifier range, the Products stands out in quality by technical advantages like sub-zero-tg, non-migrating plasticizer & core-shell molecular structure. All these means durable performance. The Waterproofing systems are conveniently made up of unit modules, which are permuted and combined to build various Systems depending on required service and conditions. The more...
We offer our clients with transparent coatings that are used as protective agents in the construction area. These high grade transparent coatings possess the below mentioned features and advantages:
more...
Bitumen waterproof coating (ENIROOF EMB) is a ready to use bitumen based emulsion, protective and waterproof coating. It is a high performance coating that dries to a tough, impermeable waterproof membrane.
Advantages more...
We provide Epoxy based Primer Coating solutions for the automobile and general industry. This is used mainly to prevent components and parts from rust in order to provide longer durability in the application areas.
This is high performance acrylic putty for sealing cracks in plasters, concretes, brickwork & gaps around penetrations (doors, windows, piping / conduits etc.). Its main characteristics are as follows: more...
We are
manufacturing a wide variety of Water repellent exterior Coat (SSWR1000), which is used
for coating painted surfaces too, as this does not impart any color change to
the substrate. It has been proven to be an excellent weather coat for all types
of cement and stone surfaces and provide water repellence within 1 hour of
application. The water repellence further improves over 8 hours after
application.
It is a
solvent soluble fast curing 30 % reactive silicone and based on silanes and
siloxanes. It is also used for imparting a colorless water repellent surface
finish to mineral construction material without significantly reducing water
vapor permeability.
Applications:
more...
Our APP waterproofing membrane are available with different reinforcement of polyester, glass fiber or compound reinforcement, our range is highly elastic as it is obtained by modifying distilled bitumen. Our range of APP waterproofing membrane uses PE film, fine sands, or mineral slates as finishing surfaces which can be applied by cold or hot-melting method. It possesses the following features: more...
We offer acrylonitrile coatings which are used for protection of thermal insulation. In addition to it, our acrylic nitrile coatings provide tough and smooth finish to LPG bullets as well as pipelines.
Self levelling monolithic epoxy flooring Floor Coat SLF - Especially suited for industrial and commercial establishments where monolithic, dust & bacteria free environment is needed. It has high gloss surface finish, excellent resistance to water, oil & light industrial chemical, easy to clean with wide range of colour combinations depending on individual requirements. Extensively used for automobile workshops, electronic industries, hospitals, hotels, laboratories, pharmaceutical units, control rooms, breweries, showrooms & food processing units etc, can be applied from 500 microns to 5mm. more...
Category Matches
Related Trade Leads
|
We are manufacturer and contractor of waterproofing product sunnfix-59
silicon base colourles liquid easy application 'just brush it' w'out
breakin... (Sell) |
|
We have full range of products to get best rain waterproofing protection
for exterior and interior application for minimum of three years. (Sell) |
|
We are offering diverse range of decorative water based paints and
concentrated colorants such as :
- Universal Colorants
- Glossy Interior Pain... (Sell) |
|
|
We are offering chimney coating, the high temperature coatings developed
by us are available in four different specifications, these are the high
t... (Sell) |
|
We are offering diversified range of waterproofing chemicals like:
- Conplast Fibers
- Cealcrete PPM
- Wallguard Ak
- Topseal Acrylic Co-Polym... (Sell) |
Tender Notifications
B2B Newsletter Subscription
