Products Directory > Industrial Supplies > Pumps & Pumping Equipment >
Vertical Pump Set
Products - 25
|
Vertical Pump Set |
Displaying 1-24 of Total 25 Products Found |
-
Products
- Description
- Supplier Information
Type HSV slurry handling vertical pumps (Gas Seal Type) are specially designed auxiliary pumps wherein a gas seal is provided between pump and motor. The gas (nitrogen or compressed air) keeps the pumped liquid containing slurry from reaching the separation seal. The motor chamber where the bearings are located is filled with a clean compatible fluid.
Mechanical seal provided in this type does not see any pressure.
more...- Hydrodyne India Private Limited
Series 'MVP' vertical submerged pumps are robust in construction. Heavy duty column pipe which supports shaft and pump assembly minimises vibration. These pumps are designed for heavy duty operation and available in various materials such as PP, GRP, UHMWPE and PVDF. Unique labyrinth sealing feature controls emission of corrosive vapours, aids protection to the drive equipment and surrounding environment.
more...- Micro-Mech Industries
Type HRV reverse circulation vertical pumps are same as HR pumps with vertical construction. This arrangement is ideal for liquids operating at vaporization points. More often, such liquids are liable to get vaporized by absorbing the residual heat generated in the motor during stoppage of pump which may cause bearing wear on restart. Vertical construction avoids this by ensuring thorough venting from the top.
more...- Hydrodyne India Private Limited
Vertical sealless, glandless pump mono type, similar in hydraulic design to any conventional centrifugal pump. For dry installation for pumping abrasive and corrosive liquids & slurries.
Capacity Range: Up to 250 m cubic/hour
Head Range: Up to 80 mt.- Polytuff Plast Pump
The vertical PP pumps manufactured by us are durable in quality. These pumps are available with the various features.Specification more...
- Pharmatech Filtration,Delhi
We offer high performance Vertical Submersible Pump that is available for all pumping conditions and is designed to suit industrial services, water supply, irrigation, mining, drainage, circulation and de-watering. These pumps are designed to lift water from deeper services at low cost. Due to simplicity of construction these pumps can be installed and dismantled easily.
- Jagdish Engineering Industries
Our company offers vertical inline SS pumps ( DP pumps ), which are higher in efficiency and easy to operate. Some of the features are: more...
- Halward Aqua systems
We are manufacturing vertical inline pumps that have highly efficient hydraulics design. It is provided with fabricated components and less friction system (Pressed Components). Easy to install, the range has small floor space.
Application Area :
• Can handle Liquids up to 120 C.
• Booster applications, hydro pneumatic systems, fire fighting.
• Boiler feed, condensate transfer. - RO, DM plants.
• Industrial washing, coolant circulation.
• Sprinkler irrigation, etc.
Material Of Construction
• All wetted parts are of SS-304/ SS-316
• Sealing :- Carbon - Ceramic, SC/SC, TC/TC
• Bushes :- Tungsten carbide motor Support, Foundation Base :- Cast iron.- Creative Engineers
Our range of vertical multistage inline pumps are manufactured by using most advanced machine. These are precisely made by using premium quality stainless steel to provide rust resistant function. It is fitted with mechanical seals for optimum utilization of energy and improved efficiency. It is serving numerous applications in Fire hydrant systems, Boiler feed water, Hot & Cold water Circulation, Washing, Pressure Boosting, Water treatment and many more.
more...- Hydromax Technologies
We use latest technology to manufacture industrial coolant pumps 0.5 HP of model KC 2. These pumps have an output 150 LPM at 1 meter head and are used for heavy duty grinding, diamond saw cutting, (granite marble cutting), bar drawing, centreless turning, CNC machines, magnetic-crack detectors, tablet & capsule bubble pack machines, induction hardening machines and many more. Dimensions of these coolant pumps are as per TS: 2161 standard and are especially used where more quantity of coolant is required. more...
- Ahmednagar Machine Tools
We deal in a wide assortment of immersible vertical multi-stage pumps SVI that are engineered with acute precision for efficient and faster performance. Our pumps have found applications in diverse industries for sinking piles by water injection, pressure boosting water systems, for multi storied buildings, spraying installations in horticulture and agriculture, spray pump in paper industry and allied purposes.
Applications:
• Water distribution, water treatment
• Industrial washing equipment, heat recovery
• Pressure boosting, filtration equipment
• General industry, auxiliary equipment, irrigation
Range:
Delivery : upto 72 m³/h
Head : upto 250 m
Temperature : -10 to +90 °C- A.T.E Enterprises Private Limited
We are manufacturing vertical pumps with an integral tank that is mounted on the floor and does not require any special foundation or alignment. Some of the special technical features of our products are: more...
- Creative Engineers Slurry Pumps
Range : Delivery size up to 100 mm
3 Capacity up to 75 m /hr
Head up to 220 metres
0 0 Temperature (-) 15 C to 120 C
Features : more...- Sri Sai Rama Engineers
Our SVP-BL series pumps are extensively used for sewage and are effluent for any abrasive liquid. These work at a speed of 750, 1000, 1450, 2900 R.P.M. Its head is upto 150 mt and the discharge work is performed upto 1500 m3 / Hr. Following are some features of our product: more...
- Sehra Pumps Private Limited
Vertically arranged centrifugal pumps type KP-VER is manufacture using high grade cast Iron, WCB, CF8, CF8M, SS317, CD4MCu, ALLOY20, HASTALLOY 'B' &'C' and is suggested in all cases where space is constraint for the installation. Furthermore, if there is any risk of flooding they also provide safety for the motor. These pumps are commonly used for sewage water supply in effluent disposal and have features such as.
more...- Keerthi Pumps
The range of multistage pumps that we are offering are used to Irrigation Sprinkler installations water works fire fighting mining Fuel pumping Handling volatile liquid-wash down applications Hydraulic press circuits Transfer & circulation hot & cold water Boiler Feed pumps condensate pumps
- Creative Engineers
The vertical sump pump is designed according to well known successful two pipe principle, chemical immersion pump of plastic material, without shaft sealing but with guide bearing bush in the liquid. Specially adapted for abrasive & corrosive fluids.
Immersion Length: 400-2500mm At 1440 rpm, 400-1800mm At 2900 rpm
Capacity Range: Up to 150 m cubic/hour
Head Range: Up to 50mt.- Polytuff Plast Pump
The range of our Creative Vertical Slurry Pumps is widely used in spillage applications in benefaction plants. Our pumps do not have a gland box, submerged shaft seals or bearing. This removes the requirement of sealing water and guarantees minimum maintenance. The bearings are fitted above the sump level with heaving double protection against penetration of slurry.
Wear parts are available with Ni-hard, Hi-chrome, natural rubber, CD4MCU, SS316, CF8M etc. Creative Sump Pumps are available in various types. more...- Creative Engineers Slurry Pumps
Our medium duty pump 0.1 HP has an output of 36 LPM at 1 meter head. These are used in general purpose machine tools with moderate cutting action like centre lathe, drilling, milling and several other operations. Available in gun metal body, our industrial pumps of model KC 1 are acknowledged for their durability and energy efficiency. more...
- Ahmednagar Machine Tools
Catering to various applications like fertilizers, refineries, petrochemicals and others, we have come with vertical submerged pumps. These pumps are available in economical prices and we ensure that we do not compromise o the quality aspect. Following are some of the essentials of our product:
Capacities:
Our pumps cover a range of capacities extending to 700 M.cu/hr. at 1450 rpm, and 300M.cu/hr_ at 2900 rpm. Head range upto 100 mtrs. Pump Suspension Depth upto 6 mtrs. Its temperatures extend from -30°C to +180°C, depending on the material of construction.
Design features:
These pumps are centrifugal type of single stage with semi open impellers at bottom. The pumps can easily handle liquids, contain solids and have a tendency to polymerize or crystallize. Its advantageous feature lies in easy maintenance, simple mounting arrangement and requires no foundation.
Base plate:
From our end, we supply standard range of base plate in mild more...- Sehra Pumps Private Limited
Our concern stands high in terms of supplying premium range of fire fighting submersible pump which used for applications in terms of fire fighting. These pumps deliver highly rated service in terms of efficiency, accuracy and functionality. These provide higher safety solution to prevent fire and other hazards. Following are the features of our product: more...
- Sehra Pumps Private Limited
Our technologically advanced industrial fan cooled pump 0.3 HP is equipped with stainless steel impeller and has output of 100 LPM at 1 meter head. These are fan cooled pumps useful for heavy metal removal rate machines, heavy duty grinders, wire & bar drawing machines. Available under model KC 1, these pumps have terminal box design which facilitates their positioning in any one of 4 directions in horizontal plane, at an interval of 90" with respect to outlet. more...
- Ahmednagar Machine Tools
We manufacture durable motorized coolant pumps 0.3 HP having output 100 LPM at 1meter head. Our technologically advanced model KC 2 coolant pumps are useful for heavy duty metal removal machines like heavy duty grinders, wire & bar drawing machines. These are available in different stem length of 220 & 270 mm and are fan cooled. Our coolant pumps 0.3 HP are equipped with class 'E' insulation motors and are appreciated for their minimum power consumption. more...
- Ahmednagar Machine Tools
Our model KC 1 electric coolant pumps 0.25 HP has an output of 70LPM at 1 meter head. These are equipped with efficient motors and are useful for heavy duty metal removal machines like multi tool lathes & medium duty grinders. Available with stem length 120,170,220mm, our coolant pumps 0.25 HP is compact in design and can be used in minimum available space. Having excellent output capacity, these pumps are useful in handling water when power supply is at 415V, 50Hz and without reducing outlet size. more...
- Ahmednagar Machine Tools
