Products Directory > Scientific Instruments & Supplies > Testing Equipment & Machines >
Vacuum Test Chamber
Products - 11
|
Vacuum Test Chamber |
Displaying 1-10 of Total 11 Products Found |
-
Products
- Description
- Supplier Information
A fog room is prepared with maintained temperature of 100, which is a standard laboratory conditions for specimens testing. A wide variety of instrumentation equipment are used to build up this room.
- Classic Scientific
Cold tread built tyre, gummed and stitched, is covered with special rubber envelop for over heat protection before putting it in this electric chamber for curing. This is fully insulated and has pneumatic control valves and safety valves. It has easy loading and unloading features for two, four and seven tyres at a time. more...
- Sant Engineering Company
Our stability chambers are provided with microprocessor based PID regulator along with auto tuning feature. It has inbuilt humidity sensors to measure it in relative solid state.
more...- Acquavir International
We exclusively represent CARON, USA for photo stability chamber and other Products from Caron. These Products are specifically designed to performed the stability experiment as per ICH guidelines Q1B. The tests are performed either in UV or visual light. Our range of benchtop unit controls light with on line radiometric measurements, with the following features:
• Sensors for UV & Visible lights are separately installed
• Ease of selection of test lamps
• Operation under ICH automat mode or normal manual mode
• Shut-Off lamps as per specified exposer level or as per time duration
• Lamp life counter with password reset facility
• Precise temperature & humidity (option) controller
• Programmable alarms for temperature humidity & lamp life
• Graphical representation of light energy, temperature, humidity from the start of the test
• Uniform light distribution and high intensity levels allow quick response for forced degradation- Aetron
Our entire range of humidity and stability test chambers are available in sturdy and compact designed.
These are made of superior grade raw materials to enhance the durability and efficient functioning at clients end. Some of the features of our products are: more...- Scientific International, New Delhi
We provide our customers with premium quality vacuum chambers which are used for volume melting ensuring efficient performance. These can be customized as per the clients requirements. Some of its specifications are:
•Raw material-- SS, Carbon steel, etc.
•Robust to endure thermal & mechanical stress.
•Technically improvised.- Veekay Engineering
Performance: JIS-D 0207 or JSS-55555 and IS 9000 Part-XII
Test Space Volume: As per customer requirements.
Temperature Range: Ambient to 50 ±20C
Dust Agitation: As per chemical composition.
Dust Collection: 25 gm +5gm with in 5 minutes in define dust measuring device as per IS-9000.
Exterior fabrication
The Exterior of chamber will be made of CRC Sheet with electrostatic Powder Coating of 20 SWG with Gray/Azure blue for a good aesthetic look.
The Exterior of chamber will be made of non-magnetic Stainless Steel ANSI 304 grade quality of 20 SWG.(Optional). The exterior surface will be high wear resistance.- Ballice System & Controls Private Limited
ETS provide high – quality Environmental test Chambers with different capacity that meet every customer ‘s need ,custom design also available .our all chamber is made stainless steel SS, microprocessor type single/two loop controller, with P.C. interface. Test Chambers are able to perform both high and low temperature tests and can provide a temperature range of -70°C to 180°C. A wide humidity range is accurately controlled with an advanced and highly reliable humidity system. Electronic humidity sensors provide superior long-term testing results and reduce the maintenance.TECHNICAL SPECIFICATIONS: more...
- Envirotech Systems
We offer to our clients technically advanced range of acoustic chambers that are known for their superior performance levels and comply to JSS-55555 and IS: 9000 Part –XVI -1983 standards. Further we also have the expertise to provide test space volume as per clients requirements.
Some of the salient features of our product include:
Temperature Range: Ambient to 50 degree C
No of Nozzles: 8 Nos.
Angle of nozzles: 4 nozzles at the corners at 45degree angle and 4 nozzles horizontally at the center of the area of the four side of item.
Nozzles Water Pressure: At atmospheric condition Static pressure of 70 to 200kPa ±15%.
Consumption of water: Tap water 450 liter ±10 % per hour in re-circulation basics.
Rotating Table Diameter: 500mm
R.P.M of table: 3.0 round per minute
Exterior fabrication: more...- Ballice System & Controls Private Limited
Thermal Shock Chambers have two or three separately controlled temperature zones between which products are automatically transferred, producing a temperature shock to the product. This resulting shock is particularly useful in determining whether a component is good or bad.
Temperature shock tests were traditionally performed in accordance with military test standards on electronic chips, integrated circuits, and printed circuit boards. Today, most commercial reliability and quality control programs also call for rapid and extreme temperature change. Thermotron manufactures several configurations of Thermal Shock Chambers to meet a wide variety of testing needs.
The vertical, two zone chamber has hot and cold zones that can be controlled independently. The single basket product carrier moves up and down, from one area to the other, subjecting the product dramatic changes in temperature.
The horizontal, three zone chamber has three temperature more...- Ballice System & Controls Private Limited
