 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Industrial & Engineering Goods >
V Blocks
Products - 19
|
V Blocks |
Displaying 1-20 of Total 20 Products Found |
Products
We are trusted name in manufacturing magnetic ''V'' Block which are extensively used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs. These blocks have accuracy for Flatness, Squareness and Parallelism within 0.005mm upto 6”L & 0.010mm for 8” L of "V"block. Its bigger V angle & bottom holding surface are equipped with hardened strips for wear resistance. It provides uniform and strong magnetic pull to all three magnetic surfaces Top, Bottom & V face. Not only this, its hardness of V face is 60±2 Rc. Further, it has the following features: more...
We manufacture Graphite crucible use in manufacturing Jewellery. Also heating elements for extrusion purpose and different components like dies, rods etc. made from imported graphite in Isotropic Grade as well as Indian Grade.
Carbon 'V' block of high quality is used in Diamond manufacturing Unit. This carbon 'V' block is use in the machines of diamond industries like sowing machine and grooving machine to support the spindle at two ends. Where the diamonds are cut and given different shapes.
Application:
• Jewellery Manufacturing Industries
• Diamond Manufacturing Industries
• Isotropic Grade (U.S.A, Japan, France)
• Indian Grade
Erich Magnetic Bases are the most universal type of dial gauge indicator holder. The base and two sides are energized for gripping of flat surface and a vee- slot enables the base to hold on round surfaces . The exclusive push – button control turning On and OFF allows one hundred location of the base on any machine tool . If required a scriber can be fitted in place of dial indicator. A regulator type ON and OFF system is also available.
Magnetic 'V' Blocks used in Tool Rooms for drilling , grinding of round Jobs. The 'V' Block has total three magnetic surfaces. Top and Bottom with 90° 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground, when turned ON all three magnetic surfaces are activated simultaneously. The permanent magnet holds the work firmly in the 'V' .
more...
With our latest designs and commitment to deliver the best we provide a significant range of press brake dies (V dies) to the customers. This tool is corrosion and abrasion resistant and hence provide up with durable solutions. This tool is available with us in different shapes and sizes according to customer’s requirements more...
We also manufacture Graphite Crucible use in manufacturing Jewellery. Also heating elements for extrusion purpose and different components like dies, rods etc. made from imported Graphite in Isotrophic Grade as well as Indian Grade. Carbon V block of high quality is used in Diamond Manufacturing Unit. This Carbon V block is use in the machines of diamond industries like sowing machine & grooving machine to support the spindle at two ends. Where the diamonds are cut and given different shapes. APPLICATION: ♦ Jewellery Manufacturing Industries ♦ Diamond Manufacturing Industries MATERIAL USED: ♦ Isotrophic Grade (U.S.A., JAPAN, FRANCE) ♦ Indian Grade more...
Our H & G “V” Block’s are manufactured in so many sizes, ranging from 2” to 12”. Further, it is also to manufacture them in two degree’s, that is Total angle 120º OR Total Angle 90º . These can be used grinding, light milling, drilling & inspection of round & square jobs. All its sides are hardened & ground and has accuracy for flatness, squareness & parallelism within 0.005mm upto 150L & 0.010mm for 200L. It has a hardness above 60 Re and is supplied in matched pair. These blocks have uniform and strong magnetic pull to all three magnetic surfaces, Top, Bottom & V Faces. Further, they have easy ON - OFF facility and also along with this, 120° "V" angle also available.
These angle plates are invaluable for accurate work in
Tool room, right angle machining & grinding.
Made from single piece high quality alloy steel.
Accuracy for Square ness, Flatness & Parallelism
Within 0.005 mm.
Hardness - 60 ± 2 Rc.
Unique design to hold small cylindrical parts also.
M6 & M8 tapped holes for clamping.
Three clamps provided for different clamping.
sizes:-100*100*115
or custom made more...
We offer a wide range of magnetic v blocks which finds usage in grinding, light milling, drilling & inspection of round and square jobs. These harden and ground magnetic v block are known for accurate flatness, squareness and parallelism within 0.005 mm up to 6 L & 0.010 mm for 8 L of "V" block. Its bigger V angle & bottom holding surface are equipped with hardened strips for wear resistance. It provides uniform and strong magnetic pull to all three magnetic surfaces top, bottom & V face. Apart from this, the hardness of V face is 60±2 Rc.
The technical specifications and salient features of our range are listed below: more...
Our offered range of V Blocks finds usage in grinding, light milling, drilling & inspection of round and square jobs. These blocks are widely known for their accurate flatness, square ness. The permanent magnet of these blocks hold the work firmly in the 'V’ and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease even after long use and the magnetic system being shielded from penetration of moisture that cannot be damaged by coolants or other fluids. more...
'V’
Blocks are required for Quality Control, Tool Room and Standard Room.
"Crystal" Brand Magnetic 'V’ Blocks have high
magnetic pull, hence
they can be used fro drilling and grinding (both wet and dry) and
even for light milling work.
The
'V’ Block has a total three magnetic surfaces. Top and Bottom with
90 'V’ angle and end surface opposite to switch. All three magnetic
surfaces and the two sides are carefully ground. Their accuracy kfor
flatness, parallelism and squareness is within 0.005 mm for 2",
3", 4" & 6" 'V’ Blocks.
When
turned "ON" all three magnetic surfaces are activated
aimultaneously. The permanent magnet holds the work firmly in the 'V’
and if kthje block rests on a magnetically conductive surface, it is
held firmly to this surface. The magnetic pull is constant and will
not decrease eveb after long use. The magnetic system being shielded
from penetration of moisture, cannot be damaged by coolants or more...
We offer a comprehensive range of magnetic vee block which are made both in Soft and Hardened variety. These magnetic vee block are widely relied for their superior surface finish and proper grinding technique. For soft magnetic vee block, easily-replaceable hardened pads with critically maintained thickness are made. Hardened pads are also available in a variety of shapes and sizes for different types of use. more...
The
'V’ Block have two 'V’ angles of different sizes to take jobs of
various dimention. By means of clamp the work can be held rigidly to
the 'V’ Block. The top 'V’ and bottom 'V’ are parallel within ±
3 micron and it's squareness to the end faces and height variation to
the 'V Block in a pair is within ± 3 micron
In
Built Features :
1
' V’ Block are hardened and ground to 55 to 58 HRC.
2
Precision ' V’ Block for Toll Room, Inspection, Work, Assembly
Shop.
3
All sides precision ground, Parallel and square.
4
' V’ groove ground central and parallel two sides & base,
Perfect aligned and matched
with
± 5 microns.
5
Supplied with clamp for holding job.
6
Hold square and round work.
7
Permits grinding ends of work square with sides. more...
Our range of hardened V blocks with Clamps is offered in numerous sizes ranging from 2 to 12. Moreover, these hardened V blocks are also offered in two degrees, that is, total angle 120º and total angle 90º. Our range of hardened V blocks can be used for grinding, light milling, drilling & inspection of round and square jobs. All the sides are hardened & ground and have accuracy for flatness, square-ness & parallelism within 0.005mm up to 150L & 0.010mm for 200L.
These hardened V blocks have a hardness above 60 Re and are supplied in matched pairs. The hardened V blocks have uniform and strong magnetic pull to all three magnetic surfaces, that is, top, bottom & V faces. Further, these are offered with easy on - off facility and also alongwith this, 120° "V" angle is also available. more...
We are an eminent organization providing precision engineered steel vee blocks. These vee blocks are fabricated from premium quality steel both of soft and hardened variety. Our range of ISO certified vee blocks are robust in construction and provides long service life. We also customize our range as per the specifications of clients. more...
Offering a precision engineered range of magnetic v block of all sizes. more...
Our manufacture a quality range V-Blocks that are one of the most popular magnetic accessories used for various industrial applications. Our range of V-Blocks includes parallel & universal v-blocks. These can be used fro drilling and grinding (both wet and dry) and even for light milling work. Our range of V-Blocks provides uniform and strong magnetic pull to all three magnetic surfaces Top, Bottom & V-face.
Specifications: more...
Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications .
These can be used either ways, up or standing on end. All Vee’s and faces can be energised or de energised simultaneously by turning the rotary action gun metal control knob. This feature enables the Vee Block to hold both itself and the work on any flat ferrous surface including a permanent magnetic chuck (without energising the chuck). Gun metal construction of the knob ensures no interference with the magnetic field, unlike the conventionally used steel knobs.
For applications requiring two Vee blocks matched and numbered pairs are available. Ordering Information more...
Magnetic V-blocks
Vee - Blocks
Microflat V-blocks are widely used in Workshops, Tool Rooms & Standard Rooms for variety of application in Tooling and Inspection purposes such as marking accurate Centres, Checking concentricity, Parallelism, etc. C.I. Plain V-blocks, C.I. Elongated V-Blocks Granite V-blocks. C.I. Universal V-blocks, Hardened & Ground Steel V-blocks SALIENT FEATURES C.I. Universal V-blocks, C.I. Plain V-blocks, C.I. Elongated V-Blocks are made from close grained C.I Casting conforming to Grand FG-220 of IS-210, offered duly handscrapped finish. Universal and Elongated V-blocks are generally conforming to IS-4960-68 and Plain V-blocks are generally conforming to IS-2949-74. Steel V-blocks are made from hardened & ground alloy steel having hardness 55 to 60 HRC generally conforming to IS-2949-74 available in Grade-A accuracy having included Angle of 90 degree +/5. Granite V-blocks made from good quality Granite, working faces offered duly finely lapped finish having included
Category Matches
Tender Notifications
B2B Newsletter Subscription
