 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Heating Equipments >
Tubular Heaters
Products - 42
|
Tubular Heaters |
Displaying 1-44 of Total 44 Products Found |
Products
Our range of tubular/finned air heaters are made out of stainless steel (304 & 321 Grade), and in incaloy pipe for higher temperature application with high grade magnesium oxide insulation powder. These tubular and finned heater also made in finned covers for better transmission of hot air. We ensure that they are the most versatile of all electric heating elements, capable of being formed into virtually any configuration to heat liquids, air, gases and surfaces. Mounted through tank walls using standard pipe couplings, they are available in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions. more...
Tubular heating elements during recent years is widely accepted as a mode of heating due to its flexibility with which it can be formed into any shape and sizes depending on the application. Due to its versatility, flexibility and relative insensitivity to mechanical damage the tubular element has often provided ideal solution to difficult problems encountered in heating.
We are one of the leading manufacturers of a wide range of Tubular Heaters. These basically consist of a helically wounded Nichrome 80/20 resistance wire coil centered into metal sheath, which is insulated with magnesium oxide. Moreover, we manufacture these heaters in a variety of shapes & sizes that are offered to our clients as per their individual heating specifications and application requirements. We make use of high-grade sheath material such as, incolony, stainless steel, copper and titanium. The usage of the sheet material depends entirely on the working temperature required. Our range of Tubular Heaters is used for heating air, water, oil and similar kind of fluids. more...
Micro Tubular Coil Heaters are manufactured in two standard diameters, 1.5 mm and 1.8mm (0.059” & 0.07”). These heaters are swaged and compacted to these diameters and fitted into special clamps to tighten over circular parts for heating purpose.
Axial Clamp: more...
Our infrared heaters produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. As the coil is embedded in ceramic material, it can be installed in any possible position. The heater incorporates highly heatproof resistance wire that provides safety against any damage. The material used for the production do not oxidize therefore the surface always remains clean and do not wear out. Longer service life is achieved since the resistance of the heaters is made to remain constant over the whole temperature range. Our heaters are available in two standard models. These heaters are widely used in thermoforming & vacuum forming machines and in shrink packaging.
Flame Proof Heaters
These heaters are designed and manufactured in both standard and customized form to meet the various requirements of our clients.
Short Wave Infrared Heaters
Our short wave infrared heaters are available in different lengths from 5" to 30" or as more...
Formed Tubular Heaters can be supplied in either Stainless Steel or Incoloy with nominal sheath diameter of 6.80mm, 8.00mm and 10.70mm. Standard elements have a threaded terminal post which gives a cold section of approx 40mm minimum.
The helical wound heating wire is made of a high temperature resistant NiCr alloy. And the insulation consists of superior grade of magnesium oxide (MgO). As the heaters are swadged, even at high sheath temperature they have excellent electrical insulation and a high heat transfer. To prevent the heater from moisture the connection ends are sealed with sealing components.
For manufacturing formed elements it is necessary to have a accurate dimensional sketch showing all the centre distances, radius and degrees, thus they need to be provided while placing the order.
Features: more...
We offer a wide range of tubular air heater are perfectly designed to give the user the best satisfaction after usage. Our range of tubular air heater saves time & space , which is its unique feature. The working of these heaters are up to mark and are available at most affordable prices.
We offer a wide range of flexible jacket heater, which are best known for their best performance. These flexible jacket heaters provide uniform heatings to all components, which results in increased process yields and a reduction in unscheduled downtime.
Further, our range of flexible jacket heaters are available in different types with different operating temperatures. These heaters can also be operated in other way due to its flexibility feature and are available at market leading prices.
We put forth a range of tubular heaters for hot runner manifolds that are offered in either Stainless Steel or Incoloy with a nominal sheath diameter of 6.5mm, 8.00mm. The standard elements have a threaded terminal post that provides a cold section of approx 30mm minimum. The helical wound heating wire is prepared with NiCr alloy that is resistant to high temperature.
Further, the insulation is done with a superior grade magnesium oxide (MgO). Since the heaters are swadged, as a result even at high sheath temperature they provide excellent electrical insulation as well as high heat transfer. With the purpose of preventing the heater from moisture, the connection ends are sealed using sealing components.our tubular heaters are certified from CE certification.
Features:
more...
Application : Natural Convection : more...
Maintaining our usual standard of perfection in the standard model, we have been fabricating tubular heaters with precision engineering technology. Our heaters are extremely energy efficient and rationally designed for obtaining optimum functional efficiency.
Industrial Applications:
more...
We offer an extensive range of tubular finned air-heaters, which are used for high temperature applications in various industries. These heaters are made from premium grade stainless steel and available with finned covers for better transmission of hot air. These tubular finned air-heaters are provided by us in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions. These heaters are also customized as per the specific needs of the clients. more...
Suction heaters are specifically designed to heat only that amount of material that is to be pumped from a large storage tank. The outlet nozzle is attached to the pump suction. The heater heats the material inside the heater pipe body which is then drawn through the heater into the suction side of the pump. This technique saves substantial energy costs since it is not necessary to heat the entire contents of the tank to draw off relatively small amounts of viscous materials. Complete weather-proof construction makes these heaters perfect for installation in large outdoor storage tanks. Large heater inlet provides smooth, full-flow through the heater.
Features
more...
These are custom designed in a various shapes to address client’s requirements for direct immersion in liquids such as water, oils, solvents and process solutions, molten materials as well as air and gases. Tubular heaters are produced using Incoloy, stainless steel or Copper sheath materials and also there is huge variety of selection of termination styles available. Insulation of Magnesium offers greater heat transfer. Tubular heaters can be used in any application. Straight tubular can be inserted in machined groves for conductive heat transfer and formed Tubular provides consistent heat in any type of special application. Its applications areas are: more...
We are engaged in manufacturing and supplying of the tubular heaters which is known for its effective functioning in the electrical and the process industry. Varied tube sheath materials and the different tube diameters are available. Oxidized tube surface requires the heating of the air.
Basic types of tubular heaters consist of:
more...
Our range of Tubular Heater is quality tested at all parameters and is known for effective functioning across the electrical and process industry. The heaters are fabricated using quality raw material the range is available in various tube diameters and sheath material. It is an ideal heater for damp and humid conditions.
Application areas:
more...
Heatco’s tubular heater elements are designed primarily for direct immersion in liquids such as water, oils, solvents and process solutions, molten materials as well as air and gases. By generating all the heat within the liquid or process, these heaters are virtually 100 percent energy efficient. These versatile heaters can also be formed and shaped into various geometries & configuration for radiant heating and contact surface heating applications. more...
We offer a wide range of tubular heating elements. Tubular heating elements are made out of chrome nickel steel tube for efficient baking and curing of paints, enamels, lacquers, varnish, adhesive, etc. Tubular heating elements are also used for drying of metals, powders, sands, paper, textiles, etc. These tubular heating elements are specially suited to exposed and semi exposed areas. more...
We offer special type S S Tubular heater with fins made of superior quality material. Competitively priced, it is one of the products that ensure high efficiency and superior performance.
Tubular heating elements/ tubular heaters with or without heat dissipation fins, mounted on rectangular plate forms a heater bank. Heater bank mounted on frame or duct duly provided thermal insulation.
Application:00
more...
Tubular Heater
We offer to our clients, Tubular and Immersion Heaters, which are ideal for heating fluids. These combine several tubular elements and a monting attachment. We can customize these for our clients as per their varied requirements. more...
Formed Tubular Heaters can be supplied in either Stainless Steel or Incoloy. The helical wound heating wire is made of a high temperature resistant NiCr alloy. And the insulation consists of superior grade of magnesium oxide (MgO). As the heaters are swadged, even at high sheath temperature they have excellent electrical insulation and a high heat transfer. To prevent the heater from moisture the connection ends are sealed with sealing components. For manufacturing formed elements it is necessary to have a accurate dimensional sketch showing all the centre distances, radius and degrees, thus they need to be provided while placing the order. more...
We
offer a wide range of tubular heaters, which are manufactured using
superior grade steel and available in cream color. These tubular heaters are suitable
for use in damp and humid conditions. Further, our range of tubular heaters find
application in garages, greenhouses, drying rooms, etc.
Specifications
:
more...
We manufacture and supply a wide range of tubular heaters, which are used for various applications in garages, greenhouses, drying rooms, etc. Our range of tubular heaters are known for their effective functioning in the electrical and the process industry. Manufactured from high grade raw material, these tubular heaters are available in different tube sheath materials and various tube diameters. Our range of tubular heaters are ideal for damp and humid conditions. more...
We offer a variety of basic types of tubular heaters:
more...
Our range of Tubular heater is known as one of the most versatile electric heaters offering a wide range of ratings, sheath materials and forms that can be applied to almost any temperature requirement. These can be used whether for heating of solids, liquids or gases. Protected from atmospheric corrosion and mechanical abuse, these heaters are appreciated across the globe. Specifications more...
Tubular Air Heater more...
We offer a versatile range of custom build tubular heaters that can be transformed in any configuration. Basically these comprise of a helical coil of nickel-chromium resistance wire precisely centered in a metal sheath. The coil being surrounded with magnesium oxide powder is loaded with vibration and thus ensures the even density throughout the length of the heater. Finally the entire assemblage is abridged to the finished diameter which compact the MGO and freezes the coil in the centre of the heater. Customized as per industrial, commercial and scientific applications these are widely in demand in the market. more...
Extremely energy efficient, our product is designed for optimum efficiency. We offer tubular heaters as single-ended or double-ended. These are available with various dimensions in heated length and heated width. Used for driers and ovens, it is competitively priced.
We are amongst the leading manufacturers and exporters of Ceramic Tubular Heater that has gained wide appreciation for international quality standards. These Ceramic Tubular Heaters are the most versatile, dependable and rugged of any heat generating device. Detailed specification of our range is tabulated below: more...
We offer immersion heaters in Copper, SS304, SS316, SS316L, Incoloy, Titanium, Lead /Teflon Coated Sheath Materials. It also comes in 1"-3" Brass flange & Custom Flanges. It basically serves general purpose and has the basic features of explosion and moisture resistance .it is available in High, medium and low watt densities for various processes. Some of its specific features are: more...
We manufacture Tubular Heater of all types. Maintaining our usual standard of perfection in the standard model, we have kept space for meeting each and every type of customized need. Our Tubular Heater is an example of what we have been doing all these years – a quality product that can be altered to suit your requirement and in a time span that is almost unbelievable.
High Technology Products HSCO stands out in high quality thanks to the confidence that it has obtained from customers all over G.C.C., due to the technology and qualitative level of its products. HSCO can offer its technical skill and consequently its support in various applications for this reason, highly reputed clients trustfully turn to us whenever they need electrical heating system.
• Are perfect for higher temperature application.
• These have high grade magnesium oxide insulation powder.
• These heater also made in finned covers for better transmission of hot air.
• Stainless steel of 304 & 321 grade and in incaloy pipe are used to craft these heaters.
Stainless Steel Heater:
Stainless steel heater can be used for alkali solutions 304 or 316 qualities are to be used. 316 quality of S. S. Heaters can also be used for diluted acid solutions, phosphating, Trichloroethylene and Deionised Water.
Mild steel Heaters:
Mild steel heaters can be used for oil, alkali cleaners and caustics
Lead Bounded Heaters:
These heaters can be used for acid baths like sulphuric, hydrochloric, nitro and etching purpose. It is mainly used in Chrome Tanks.
Silica & Teflon Heaters:
Silica & Teflon heaters are also available on demand & specific requirement of clients.
Rod Type (Bobbin) Immersion Heaters:
Rod type (Bobbin) Immersion heaters (with replaceable elements are generally meant for vertical mounting, however for horizontal mounting, these are supplied with threaded flanges, (metallic or non-metallic) The standard size ranges from 300 mm. more...
Tubular Duct Heaters consist of assembly of sheathed tubular or finned tubular elements. They are available in box or slide type. We can custom manufacture it in specific designs on request.
HeatingUpto 300° C
Application:Commonly used for warming,drying,preheating and heat treatment. more...
The fused magnesium oxide filled Tubular Heater are manufactured with the state-of the art technology for corrugation machine industries. The heat resistant Kanthal 'D' wire is placed in concentric with the outer sheath made out of Stainless Steel 304 grade and filled with high density fused magnesium oxide, which is highly thermal efficient and a very good insulator. These heaters are roll reduced from original diameter of 12.7mm to 11mm thereby making it highly compacted to transfer maximum heat to the flutes. Each corrugation machine heater consists of 6 to 9 Tubular heaters depending upon the kilowatt capacity required. Each element has been designed and fixed to the corrugation machine heater frame, which is individually replaceable. The heaters are manufactured with quality control activity carried out right from the stage of selection of raw material to the finished product. Thermen Group has a wide list of clientele (over 600 customers) all over India. The company is more...
We offer a spectrum of micro tubular coiled heaters, which constructed using M.S / S.S titanium pipe, which is welded with C.I. /S.S flange that has a replaceable refractory insulated heating element inside.
Specifications:
more...
Tubular heaters are custom Formed in a wide range of shapes to correspond to your requirements. In colony, stainless steel or steel sheath materials are available as well as a large Selection of termination styles. Magnesium Oxide insulation ensures superior Heat transfer and the resistance wire is precision-wound for long heater life. Tubular heaters can be used in almost any application. Straight tubular can be Clamped to metal surface or inserted in machined groves for conductive heat transfer. Or use a formed Tubular to provide consistent heat in any type of special Application.
Applications more...
We offer our D type cartridge heaters at low, moderate and high watt densities. They also contain both internally & externally connected leads. For varied high temperature applications, our range of split type cartridge heaters are exactly suitable. We built them in accordance with various technical specifications provided by our clients.
Features
more...
We provide tubular heaters, which are fabricated using qualitative raw
material. Available in copper, SS 304, SS 316, SS 32 inconel as well as
incolloy sheath, our tubular heaters are reckoned for their reliable
performance.
Features:
more...
We offer premium quality and cost efficient range of tubular heaters. Our heaters are extremely energy efficient and rationally designed for obtaining optimum functional efficiency. In addition, we offer them either in single-ended or double-ended form. They are available in a wide range of dimensions i.e heated length and heated width. For driers and ovens, these tabular heaters are extensively used. We offer them at best industry prices.
We design & develop highly efficient industrial tubular heaters in different sizes, shapes and functional specifications. Retaining the high standard of their functional perfection and model variations as per customer's needs, we have kept ample space for meeting each and every type of standard as well as customized need. Moreover, they are designed and developed in compliance to varied international standards to intact their quality functioning.
Category Matches
Related Trade Leads
|
Offering to sell heaters & heating equipments such as tubular air
heater, immersion heater, aluminium casted heater, stem type thermostat,
bimetall... (Sell) |
|
Offering furnaces used for heat treating with high quality and easy
operation such as batch type integral quench furnace, bogie hearth heat
treatme... (Sell) |
|
|
We are engaged in manufacturing and supplying of the tubular heaters
which is known for its effective functioning in the electrical and
the process... (Sell) |
|
|
Looking to sell tubular heaters, ceramic band heaters, mica band
heaters, high density cartridge heaters, low density cartridge heaters,
air duct h... (Sell) |
|
We sell tubular heating elements, tubular heating elements for iron,
electric heating elements and electronic heating elements.
Product Code: Q... (Sell) |
Tender Notifications
B2B Newsletter Subscription
