Products Directory > Industrial Supplies > Gears, Gear Boxes and Parts >
Transmission Gear
Products - 31
|
Transmission Gear |
Displaying 1-31 of Total 31 Products Found |
-
Products
- Description
- Supplier Information
Modern metallurgy has greatly increased the useful life of automotive gears. Automotive gears transmit torque and rotation through an angle from a power source to the driven member. Extreme pressure gear oil is a lubricant for automotive gears and bearings.
Automotive gears are machined from wrought bar stock and subsequently heat treated to develop the required surface hardness and tooth bending fatigue durability.
Automotive gear ratio is the number of turns of the drive wheels in relation to the number of turns of the engine. If the engine is considered the input and the drive wheel is considered to be the output then the input gear or the pinion is said to mate with the output gear or the ring gear to drive or rotate it.
Gears play an important role in trucks, car, buses, motor bikes and even geared cycles. These gears control speed and include gears like ring and pinion, spiral gear, hypoid gear, hydraulic gears, reduction gearbox.
Depending on the size of the vehicles, more...- Unisoft Pheripherials
Manufacturers, suppliers and exporters of industrial gears.
- Gears India
We are the exporters of automotive engine gears like transmission gears, differential gears, propeller shaft components for trucks, tractors, passenger cars, construction machinery and other LCVs.
- Pinak Industries
UPTO 1250*14 MODULE
- Gala Gears
Hardened & Ground Gears (Precision Gears)
Manufactured with precision, the range of hardened and ground drears we manufacture have earned a lot of appreciation in the industry. All the products are manufactured in a manner that they efficiently meet international quality standards. These gears comes with special features that results in producing less noise. Our range of product is available up to 800mm diameter and 12 module. more...- Indo Mech Engineers
We offer a comprehensive range of transmission parts. Based on the technical guidance of experts, we specialize in providing variety of transmission parts.
- Rapid Impex Private Limited
We can easily design precision gears which are widely demanded in the market. These precision gears are made using premium quality materials procured from reliable sources. These gears are also widely demanded in the market and are perfectly in accordance with the technical details furnished by the client.
- Vimal Machine Tools, Yamunanagar
Our crystallizers are known for their advanced technology and durability. Easy to operate, they are corrosion resistant and can easily and efficiently produce crystals in various forms and shapes. Heavy duty construction, they are also cost effective and fulfill the needs of various industries.
- Top Gear Transmissions
We fabricate worm and worm wheels which is up to 4500mm in outer diameter and 50 module (ferrous and non ferrous). Our worm wheels are perfect for Sponge Iron Plants Fertilizer plants, Thermal Power Station, Mineral Plants, Chemical Plants, Paper Mills, Mining Industry, Steel Rolling Plants. These worm wheels are rugged in construction and robust in performance. more...
- Ashoka Gears, Delhi
We provide the gear parts of highest precision and high quality, used in making of gears at high precision C.N.C machines.
- Nanki International (India)
Known for their durability, the bevel gears manufactured and exported by us are largely used in the automobile industry. Precision engineered, these bevel gears that we have are known for their high performance and noiseless running. Manufactured from alloy steels these gears help in efficient functioning of the machines.
- Pinnacle Engineers
Helical gears connect parallel shifts but the involute teeth are cut at an angle to the axis of rotation. Two mating helical gears must have equal helix angle but opposite hand. They run smoother and more quietly. They have higher load capacity, are more expensive to manufacture and create axial thrust.
Gear Configuration
They can be manufactured in both right-handed and left-handed configurations with a helix angle to transmit motion and power between non-intersecting shafts that are parallel or at 90 degrees to each other. For shaft at 90 degrees, the same helix angles are used and the tooth contact area of the gear is very small. If the angle of gear teeth is correct, they can be mounted on perpendicular shaft by adjusting the rotating angle by 90 degrees. The inclination of the teeth generates an axial force. As the angle of inclination increases the axial force also increases. Thrust bearings can counter these forces.
Applications
These are highly used more...- Navnath Engineering Works
Transmission gears are heat-treated, high quality steel. They have smooth, hard teeth, cut on precision machinery while red hot. There are many types of gear teeth, but most transmissions use spur and helical gears. Most of the gears are the helical type, because they last longer and are more quiet than spur gears. There has to be enough room (a few thousandths of an inch) between the gear teeth for lubrication, expansion, and any irregularities in size.
- Bharat Axles Pvt. Ltd.
We are manufacturing and offering gear racks and Pinions in both spur and helical tooth form in steel, stainless steel , cast iron , brass , bronze, plastic, hylam etc.Heat treatment facility is also offered. Continuous length of Gear Racks up to 2500mm are possible. Agnee has a dedicated facility for precision gear rack and pinion cutting in volume ensuring unparalleled quality.Spur or Helical Gear Rack and Pinion Gears more...
- Agnee Transmissions (India) Pvt. Ltd., Kota
We manufacture spiral bevel gear set as per the demands of our clients using quality raw materials. We develop spiral bevel gears utilizing the latest technology and have a gear run out accuracy ranging between 0.02 mm to 0.04 mm. With the help of our team our products are designed to give optimum output of power. Offering our range of spiral bevel gear set, we cater to meet the demands of our clients like MF, Ford, Zetor, Ursus, UTB and Jeep.
- Goela Engineers (Overseas)
We are the manufacturers of an array of gears that are specially engineered for auto and tractor body. These are available in 92 types. We produce 827000 of these annually. The maximum diameter and module that these offer are 400 mm and 5 mm respectively and the quality DIN offered is 7 and 8.
- Involute Technologies Private Limited, Pune
Transmission gears are heat-treated made of high quality steel. They have smooth, hard teeth, cut on precision machinery while red hot. There are many types of gear teeth, but most transmissions use spur and helical gears. Most of the gears are the helical type, because they last longer and are more quiet than spur gears. There has to be enough room (a few thousandths of an inch) between the gear teeth for lubrication, expansion, and any irregularities in size.
- S. R. Forgings Ltd.
The Transmission Gears made by us are used in automotive applications. Manual transmissions often feature a driver-operated clutch and a movable gear selector. Most automobile manual transmissions allow the driver to select any gear at any time, but some, such as those commonly mounted on motorcycles and some types of racing cars, only allow the driver to select the next-highest or next-lowest gear ratio.
- Lucky Engineering Company
We offer a wide range of crown gear that are used in automobile components. These
gears can be connected to wheel gears and worm gears to change the direction of motion. The teeth of the crown gears are raised in one side of the gear which gives the gear an appearance of a crown. They are attached to the axle at right angles to create the force. Using high quality steel and alloy we manufacture crown gear that are featured by strength, durability and endurance.- Goela Engineers (Overseas)
We manufacture worm gears which are available in various dimensions and can easily be made as per the technical specifications provided by the client. These gears are also made using premium quality materials and are highly durable. Rugged in construction and robust in performance they can easily fit into any machine.
- Vimal Machine Tools, Yamunanagar
Bevel gears which we manufacture contain teeth cut into conical surface and usually meshing with similar gear at right angle. These gears can be customized in various sizes as per client's needs. These gears are manufactured from superior quality materials like, aluminium, steel etc. that ensures increased functionality.
- Bharat Axles Pvt. Ltd.
Widely used in automobiles and other engineering industries, our range of bevel gears are custom made as per specifications, drawing or sample. Following are some of the specifications:• In mild steel, stainless steel, alloy steel, hardened and tempered steels, case hardened steels, induction hardened, cast iron, or as specified• Teeth Size from 1 Module/10 D.P. to 10 Module/2.5 D.P.• Outer Diameter from 24 mm/1" to 300 mm/12"• Face Widths upto 250 mm/10"Required information for quotation:• Material of Construction - steel, hardening and tempering required etc• Teeth Specification - pitch, angle• Outer Diameter• Face Angle• Bore size• Key way size• Hub size• Any other requirement Where two axles cross at point and engage by means of a pair of conical gears, the gears themselves are referred to as bevel gears. These gears enable a change in the axes more...
- Agnee Transmissions (India) Pvt. Ltd., Kota
Our collection has engine gears and coupling planetary gears that are very sturdy and rugged. We offer these in 11 types and produce 600000 of these annually. The maximum size and diameter offered by these is 150 mm and the quality DIN 6 and 8.
- Involute Technologies Private Limited, Pune
We offer a premium range of spur and helical gears to our clients, which are known for reliability, flawless performance, long life and high utility in various devices. These devices can also be manufactured as per clients requirement by our team of members. Our product is available up to 2500mm diameter and 25 module to customers at market leading prices.
- Indo Mech Engineers
They connect intersecting axes and come in several types. The pitch surface of bevel gears is a cone. They are useful when the direction of a shaft's rotation needs to be changed. Using gears of differing numbers of teeth can change the speed of rotation. They are usually mounted on shafts that are 90 degrees apart, but can be designed to work at other angles as well.
Types
The teeth on bevel gears can be straight, spiral or bevel. In straight bevel gears teeth have no helix angles. They either have equal size gears with 90 degrees shaft angle or a shaft angle other than 90 degrees. Straight bevel angle can also be with one gear flat with a pitch angle of 90 degrees. In straight when each tooth engages it impacts the corresponding tooth and simply curving the gear teeth can solve the problem. Spiral bevel gears have spiral angles, which gives performance improvements.
Applications
A good example of bevel gears is seen as the main mechanism for a hand more...- Navnath Engineering Works
We have for our clients in transmission gears that are used in the automotive and other industries. These gears are manufactured from high quality metal using advanced manufacturing techniques. Used for minimizing vibration and noise thus ensuring smooth functioning of the automobiles and machines, these transmission gears have created a wider market for themselves. .
- Pinnacle Engineers
Gears which we manufacture are toothed wheels which are used to transmit motion between two shafts or a shaft and a component having linear motion, by meshing of two or more gears. They have advantage over other drives like chains, belts etc. These gears are available in various sizes and can be customized as per needs and requirements of client.
- Bharat Axles Pvt. Ltd.
We offer differential gears that find application in automobile industries and different vehicles. This gears help a vehicle to take a turn by helping the two wheels to rotate differentially with respect to each other. When one wheel is stationary then the counterpart wheel rotates at twice of its expected speed with the help of differential gears. Using high class steel and allied metals, we manufacture differential gears in customized design to meet the requirements of our esteemed clients.
- Goela Engineers (Overseas)
Made using MS or alloy steel and carbon steel these gears are used for both external as well as internal purposes. With outer diameter ranging from 10mm to 8000 mm these gears are also available upto 40 modules. These gears are precision engineered with perfection and are also cost effective.
- Vimal Machine Tools, Yamunanagar
We manufacture a wide range of spur bevel gears for our clients, which are used to transmit power between shaft rotating at different speeds. These gears are available in range up to 800mm and up to 12 module to our clients. We offer the range at most competitive prices and timely deliveries to customers.
- Indo Mech Engineers
Made using MS or alloy steel and carbon steel these gears can easily be designed as per the technical specifications provided by the client. Available in straight type upto 30 module these gears have an outer diameter of 100mm to 3000mm. All these bevel gears are also widely demanded in the industry.
- Vimal Machine Tools, Yamunanagar
