 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Automobile > Brakes & Braking Systems >
Thrustor Brake
Products - 14
|
Thrustor Brake |
Displaying 1-15 of Total 15 Products Found |
Products
Kateel’s hydraulic thruster brakes, electro hydraulic thrusters and electro hydraulic thruster brakes come with powerful motors designed to support your application. The stalled thrust of thrusters is high, and the thrusters come pre-filled with 1.5 litres of specially formulated hydraulic oil that performs reliably across a wide temperature range.
Composition and working :
A hydraulic thruster contains an AC electric motor running at speeds up to 3000 rpm. The output shaft of the motor is fitted to the impellor in the thrustor cylinder. The cylinder is made of cast iron and the oil chamber is made out of aluminium. The cylinder is ground finished for the movement of the piston. The impellor housing and the impellor are made out of aluminium casting. The piston rod is made out of alloy steel EN 24 fully machined and ground.
When the motor is rotating at high speed the hydraulic oil around the impellor is forced to push the piston upwards. The impellor is designed to more...
We are offering our clients with an industrially verified range of E. M. and thruster brakes that is widely used in the automobile industry. These E. M. and thruster brakes are integrated with brake assembly that contains various components mounted on the base frame.
The components provided on the base assembly are mentioned below: more...
Our electro hydraulic thrustor brakes are suitable for 400 or 440 Volts, 3 Phase A.C. We supply these brakes for a wide range of drum sizes from 100mm to 600 mm diameter. The brake of our electro hydraulic thrustor brakes is applied by the tension of the compressed springs mounted vertically between the thrustor and brake lever. The thrustor rods are connected with the brake by means of an angle lever.
As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel is retracted. The brake lever at the thrustor begins to move when the first lever reaches the stop on the brake base member
Our thrustor forms a part of the brake, which is a self contained unit and comprises of a centrifugal pump and impeller driven by an electric motor. The impeller spines in oil and develops a pressure head which is impressed upon the piston which is directly coupled to the load lifted. more...
We offer high standard Electro Hydraulic Thrustor Brakes. These are suitable for 400-440 volts 3 phase AC supply for a wide range of drum sizes that varies from 100mm to 600mm diameter sizes or higher. Our Electro- Hydraulic Thrustor is of 'B' class insulation and continuously rated operating on 3 phase 415 V.A.C. 50 Hz. Some of the characteristics of our Thrustors include: more...
The brake assembly contains of a brake arm, brake shoe, base frame, actuating lever, brake spring and an electro hydraulic thruster. The brake shoe is mounted on the brake arm and the gap between the brake drum and brake pad is adjusted by spring mechanism. A heavy spring suitable to give required braking force, is mounted in a square tube and a graduation scale is provided outside to note the spring force .The spring force can be adjusted suitably by tightening the nut at the bottom of the spring, All the components are mounted on the base frame.
This brake is normally in closed condition due to the spring force. The hydraulic thruster is actuated by an electric motor. When the power supply is on, the thruster motor is switched on and hydraulic pressure is developed in the hydraulic thruster. The piston is actuated instantaneously and the brake is released. When the power is cut off, the thruster motor stops thus releasing the hydraulic pressure. The thruster piston is pushed more...
The brake assembly contains of a brake arm, brake shoe, base frame, actuating lever, brake spring, and an electromagnetic thruster. The brake shoe is mounted on the brake arm and the gap between the brake drum and brake pad is adjusted by spring mechanism. A spring, suitable to give the required braking force, is mounted inside the thruster. All the components are mounted on to the base frame.
The brake is a failsafe type. Normally the brake will be in applied condition, due to the spring force on the brake arms. When the power supply is on, an electromagnetic force is developed in the coil, which pulls the plunger against the spring force. When the plunger is pulled, the spring is compressed and the brake arms move away from the drum thus releasing the brake. When the power is switched off the electromagnetic force become nil and the brake is applied by spring force.
more...
Kateel Electro hydraulic thrustor disc brake is a fail safe brake. When power supply is given to the motor, hydraulic pressure builds up inside the thruster and the piston moves up to release the brake. When the power is cut off, hydraulic pressure gets released and the piston moves down, thus moving the brake arm forward allowing the pad to clamp the disc with the spring force and apply the brake.
Composition and working :
The Base is fabricated out of Mild Steel IS 2062 suitably drilled and machined for mounting on the machine. The brake arms and Bell crank levers are suitably oxycut to the shape. The edges are properly ground smooth and are drilled to suit the mounting base as well as the brake pads. The entire pin used in the brake for base mounting, thruster mounting, spring mounting are made out of C – 40 material and are machined properly to fit to the levers. The adjustment screws are also made out of C-40. Provision is made to mount the brake pads on more...
We offer thrustor brakes
We proffer topmost quality electro hydraulic thrustor brakes that are highly demanded for its features like low power consumption, minimum maintenance, straight line motion etc. Available in various dimensions and specifications, these hydraulic thrustor brakes are known for their excellent performance and accuracy. We are viewed as one of the major hydraulic brakes suppliers from India and ensure their availability at economical prices. - Self contained Unit. - Straight Line Motion. - Full Force capacity available from start to finish of full stroke. - Low power consumption. - Little maintenance work required. - Over load or underload on thrustor cannot cause damage to the motor. - Switching operation - 720 per hour (max.). more...
Thruster operated Drum Brakes operate on the same principle as MDT brakes but has improved features like elegant aesthetics and calibrated torque adjustment.
Features
more...
Offering electro-hydraulic thrustor operated disc brakes & drum brakes. more...
Reva thrustor brakes are suitable for operation an AC supplies on 3 Phase 415 volts and are designed particularly for use with heavy duly steel works on general duty overhead electric travelling cranes and other drum brake applications. These are manufactured to suit Drum sizes 100 mm to 250mm in R-10 series. The construction is extremely simple and can be very easily maintained.
Our mill duty Electro Hydraulic Thrustor brakes are ideal for 400/440 volts 3 phase A.C. These are being supplied for a wide range of drum sizes from 100 mm to 600 mm diameter. Moreover, we can also provide higher sizes can be supplied on request. We proffer topmost quality electro hydraulic thrustor brakes that are highly demanded for its features like low power consumption, minimum maintenance, straight line motion etc. Available in various dimensions and specifications, these hydraulic thrustor brakes are known for their excellent performance and accuracy. We are viewed as one of the major hydraulic brakes suppliers from India and ensure their availability at economical prices. • Self contained Unit. • Straight Line Motion. • Full Force capacity available from start to finish of full stroke. • Low power consumption. • Little maintenance work required. • Over load or underload on thrustor cannot cause damage to the motor. • Switching more...
Thruster brake is a device to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed compression spring. The shoes press on he rotaing brake drum retarding its speed, and finally stop it The releasing of the brake and compressing of the spring is done by thruster. Other release devices like pneumatic cylinder or manual release arrangements can be offered on request.
For more info refer the attached pdf file more...
Flame-proof Thrusters are specially designed for operation in hazardous atmosphere (Zone 1 Areas) Gas Groups I, IIA and IIB, as per IS: 2148
Construction of Flame-proof thruster is similar to normal thruster type ETH, but modified to meet the requirements as specified on IS:2148 (2004). The Terminal box is re-designed to provide for moulded Terminal studs and the required Flame-path lengths.
Continious developments in product improvisations and assured quality checks, the thrusters offer compact, reliable and yet economical solutions to most of the industrical applications.
Performance Features more...
Category Matches
Related Trade Leads
|
|
We offer to sell thrustor brakes, hydraulic thrustor brakes and electro
hydraulic thrustor brakes. (Sell) |
|
|
We make mill duty electro-hydraulic thrustor brake:
- Drum dia: 100 mm to 600 mm
- Work on 3 phase 415 v.a.c. 50 c/s continuous.
- It is used f... (Sell) |
|
|
Offering thrustor brakes :
- The ?suni cranes controls? thrustor is electro hydraulic device to apply pressure or actuate lever mechanism of brake ... (Sell) |
Tender Notifications
