Testing Machines

We are engaged in manufacturing a wide range of slump test apparatus which is fabricated using high grade raw material. Our range is manufactured in accordance with the specifications of our clients and complies with IS: 7320-1974 standards. This apparatus is complete with a base plate comprising a clamp and come with handles with foot pieces and tamping graduated bar. Consistency of freshly mixed concrete where maximum size of the aggregate does not exceed 38 mm is measured with our slump test apparatus.

FEATURES
The Pendulam Impact Tester Model RSEP-284 is designed conducting CHARPY IZOD and IMPACT TENSION Test The test methods conform to IS : 1757-1973 and IS : 1499 1977 and BS : 131 part 1,2 and 3 –1972 IS : 1598-1977.

SALIENT FEATURES * Safety guards at the front side of the machine for protection
* Two hand operation to release pendulum
* Breaking arrangement for stopping the pendulum after rupture of specimen.
more...

Salient Features
* Specification :It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 r.p.m. Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two holes are provided for mounting two specimens simultaneously. Two containers with weights are supplied to keep the specimens pressed against the rotating disc. Suitable for operation on 220 volts, 50 cycles, A.C. supply.
more...

Flowmech hydraulic lab testing machines are designed to meet the customer's need for a compact and high efficiency material life tester. Hydraulic testing machines operate very easily meeting the requirement to be ultra quiet for test lab use. The unit delivers accurate results. Customer supplied electronic logic circuitry and motor starter were incorporated into the assembly. more...

The ASIAN Bursting Strength Tester is designed to find bursting strength of fabric/ leather/ paper/paper board & corrugated box. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has a continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the plane of the clamping surface.
The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge gives the bursting pressure.
The equipment is raggedly designed to give a more...

* Dust feeder fitted with vibrating tray to add measuredquantity of the dust
* 200mm dia. ducting will be used in test equipment
* Duct fitted with Piezometer ring on the upstream anddownstream for measurement of pressure drop across the testfilter.
* Provision for the mounting of test filter
* Test filter housing suitable to mount filter of 980mmheight.
* Ducting mounted on trolley for easy mounting of testfilter and loading and unloading of HEPA filter
* Provision for the mounting of HEPA filter with conicalduct at both end.
* Airflow measuring unit with orifice plate and pressuretapping across it
* Butterfly valve to adjust different flow rate
* Blower impeller directly mounted on the shaft of themotor
* Tapping for particle counter fitted with solenoid valvefor taking upstream and downstream count
* Control panel for the above  more...

We are highly reputed for offering various sorts of premium quality compression testing machines. These are known for strength, high durability, quality and are useful for a highly advanced concrete compression testing, where frame stiffness is very critical. Furthermore, we adhere to industry leading guidelines and our frame design as a compression system helps in supreme quality manufacture of various testing machines; which are in turn able to perform highly advanced testing. more...

PRECIOUS METAL TESTER CG-612GT
Evaluating the purity of GOLD
Evaluating the purity of Gold and other metals by measuring the specific gravity of the sample, and distinguish the real precious metal from the fake material. No more stains and scratches left on your Gold after testing.
FEATURES:
* Wide karat display from 9K to 24K and Percentages of purity.
* Other precious metal such as Platinum and Silver can be tested by Optional mode.
* Can be used as a normal scale or Densimeter.
more...

We offer computer controlled Universal Testing Machines. It has an automatic data capture, storage and graphic display. It also has other features like recording, storage and retrieval of results and details. It also has an on line display of load and extension. It also has fully automatic, on screen calculations based on the delivered data. It measures output to digital printer of test data, test results and displays graphs. Its auto detection of over load, over travel and specimen break, on detection of the above conditions, the machine is automatically switched off. It has a Load resolution range of ± 0.01% of machine capacity and displays accurate results and is based on users friendly software.   more...

Technical specifications: Motorized push pull load tester: (0 TO 100KG MOTORIZED OPERATION)   We offer an assortment of Motorized Push Pull Load Tester that is wide in demand with our clients from all over the country for their wide applicability and reliable performance.    Specifications:  
* Digital Read Out
* Preset option for load
* Push and pull test from same end
* Sturdy & Accurate built fixture
* can set pick load
* motorized operation
* more accuracy in load
* designed as per IS standard
*  
      more...

Features


* Fully Computerized (PC Based) Vickers Hardness Machine.
* Direct and accurate measurement of Vickers Hardness Number using "State of Art" image
* processing technology.
* 'Wide testing range' : from soft metal such as lead up to medium hardened steels.
* High accuracy and repeatability of measurement at all loads.
* Faster measurement yielding to higher productivity.
* Small size of indentation makes it a non destructive testing on finished components.
* Motorized loading and unloading cycle.
* Small loads allow testing of thin sheet metals.
* Advanced Window XP based software.

Latest GUI Features:


* User friendly software with all help file and Window Features.
* Online indentation setting and focusing on PC monitor.
* Advance image processing Algorithms implemented for precise calculation of hardness numbers with various options to cover all ranges of specimen. more...

*.Specially designed for high tensile TMT bars.

*.Supports Tensile, Compression, Transverse,  
   Shear and other similar tests.

*.Load capacity 200 Ton (2000kN).

*.Testing of round bars from 20 to 80 mm.

*.Stroke length of 300mm.

*.Available in Mechanical and Computerized control
   Panel.

*.PC based software for capturing load Vs
   extension data and extensive analysis report.

Load Measuring:
A pressure transducer attached to the hydraulic pressure line measures the load at a resolution of 0.1kN, with auto-ranging facility.

Displacement Measuring:
A rotary encoder (available in 0.01 or 0.001mm resolution) measures the crosshead displacement.

For tensile test a high precision Extensometer is used to capture the true elongation in the specimen. It is available in different gauge-lengths
from 20 to 200mm.

Krystal Met more...

We manufacture and export world-class Liquid Limit Device that has been certified with IS : 2720 part V. It consists of a brass cup hold on adjustable bracket. The bowl can be adjusted for a fall raised and dropped on a rubber of standard hardness by cam action. It comes with a casagrande tool and in a hand operated & motorized version.

The los angles abrasion testing machine that we offer is used for determining the resistance to wear of small size coarse aggregates and crushed rock. These consists of a hollow cylinder, mounted on a sturdy frame on ball bearings. Further, a detachable shelf of our range extends throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover. Industrial applications : • calibration labs / test houses • cement • ceramics • chemicals • construction • defense • education • irrigation • nining • power ( hydro/thermal).

As per IS: 2386 ( Part IV). For determination of resistance of aggregates to wear by abrasion. It comprises of  two hollow cylinders, closed at one end and provided with tight fitting covers at the other end, are mounted on a shaft at an angle of 30 degrees with the axis of rotation. The shaft rotates at 30-33 RPM through a reduction gear, coupled to a motor suitable for operation on 440 volts, 3 phase, A.C. supply. The unit is supplied complete with a revolution counter and abrasive charges.

Fatigue testing machine (for concrete beams)

We offer premium quality rubberized Coir Machinery to produce high quality coir mattress. The machinery is used to process systematically, the coir fiber the latex manufactured into rubberized coir fleeces. Made of quality materials, our rubber coir machinery ensure superior performance, is easy to operate, durable and require negligible maintenance.

For testing aggregates for resistance to abrasion.

We are involved in offering the roundness testing machine that is specially designed for fully quick and automated function. Available in various models and specifications, it is fully automatic measuring covers everything from workpieces alignment adjustment to measuring and print output.   Features:
      
* Offset type detector holder: The offset type detector holder eliminates interference between the workpiece and R-axis arm, which facilitates measuring.

* All-in-one space-saving configuration: The DX type reduces the footprint by about 25%, A seperate type also avialable (SD Type).

* Compact. High-accuracy CNC machine: Fully automatic measuring coverseverything from workpies alignment adjustment to measuring and print output.

* Auto-centering and Auto-tilting:  This function performs quick, fully automated adjestment and correction of deviation between more...

Our experts have developed our range of VICAT / HDT Tester according to the ASTM D-1525 standard for VICAT and ASTM D-648 standards for HDT. The fabrication is done with the industry recommended materials which assures the authenticity of our range. These can be customized as per the specifications of our clients. Cited below are some of the attributes of our VICAT/HDT Tester: • Supplied along with necessary weights • Digital PID programmable controller • Accuracy as per standard. more...

Our manual brinell system which is used for hardness testing is based on simplest mechanical design. The simple design of the machine allows loading and unloading operations manually through an operating lever. Some of the salient features of our manual brinell system comprises of the following:


* Precision engineered & confirms to IS: 2281-1968, BS:240 & ASTM: E 10. RB-3000
* Measures hardness of castings, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape
" For more details see attached pdf " more...

We have gained specialization in offering our clients with wide range of Tensile Testing Machine, which are highly suitable for testing tensile strength and other mechanical properties of rubber. Further, our clients can avail superior range of these products as manufacturing of these equipments have been done under the supervision of our experts, who have fabricated these equipments with quality raw materials. Additionally, our clients can avail these instruments in various custom designs beside standard designs. Also, our rates are very affordable for these instruments. more...

We are offering our clients with a wide range of impact testing machines that are used in various companies in the engineering sector. These impact testing machines are designed using qualitative raw material and advanced technology that makes them highly reliable and durable. We also offer customized impact testing machines as per the discretion of our clients.

We offer Universal testing machine for different instruments and for different needs. • Capacity : 1-5 ton • Model : Analogue, digital & with computer interface • Loading accuracy as high as ± 1%. • Straining at variable speeds to suit a range of materials. • Motor-driven threaded columns for quick and convenient adjustment of lower cross-head to facilitate rapid fixing of test specimen. • Continuous roll auto graphic recorder supplied as standard to enable study of the behavior of materials. • High reading accuracy due to large size design of dial. • Large effective clearance between columns enables testing of standard specimens as well as structures. • Easy change from plain to threaded and screwed specimens. • Robust Straining frame of an extremely rigid construction. • Fully enclosed and protected pendulum. • Simple controls for ease of operation. • Safe operation ensured by means of safety devices. • more...

we are offering a wide range of compression test apparatus. more...

HI 9147-04 DO Meter (with a 4 m cable) and HI 9147-10 DO Meter (with a 10 m cable) are specially designed for aquaculture applications. This unit is unique amoung our family of DO meters in that it comes with a galvanic probe.


Unlike polarographic probes, galvanic DO probes require no conditioning time. When you need to measure multiple samples in a given period of time, pick it up and measure immmediately and on demand.

HI 9147 is equipped with automatic temperature compensation plus user adjustable altitude and salinity compensations for the most accurate measurements. This unit comes with a rechargeable battery (inductive charger not included).


HI 9147 is a must have for DO sensitive organisms or high bio-load environments.


• Designed specifically for aquaculture
• Backlit LCD
• Automatic temperature compensation
• Automatic salinity compensation
• Water-resistant
• Protective rubber boot more...

We offer Analog-Digital Trainers that finds application in broadcast, satellite communication, research, academic and educational institutes. Fabricated from quality material the trainers are used in different experiments. These are available in different specifications like indicator, clock generator, pulse generator, logic probe, potentiometer and many more. Some of the distinguishing features of our range include:
* Designed with the assistance of advance technology
* Precision engineered
* Available in different models
* Optimum quality
* Easy installation
our range finds application in the areas enlisted below:
* Indian defense academy
* Defense research and development organization
* Telecommunication industry
* Military
* Broadcast
* Aerospace
* Satellite communication
* Government agencies
* Academic institutions
* Public utilities
* Manufacturing facilities more...

We offer Rajco Ductility Testing Machine : Is : 1208. Ductility is defined as distance in cms to which a standard briquette of bitumen can be stretched before the thread breaks. The briquette is stretched at a rate of 50 mm /min. /2.5 mm per minute at a temperature of 27ºC /0.5ºC.

The apparatus consists of water bath with a thermostatic heater and a circulating pump to maintain uniform water temperature One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating the threaded shaft with a clutch. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1 mm fixed on the bath with 0 (Zero) of the scale towards the fixed plates side. The rotating shaft has 2 speeds of travel for the bracket, 5 cm/min and 1 cm/min. selected by a clutch. more...

Impact testing machine As per ASTM Standard

Our range of automatic impact testing machines, of model 'ASTM E-23' is available with 300 J energy and is exclusively designed for Charpy test. Confirming to ASTM E-23, this machine is geometrically checked in the works to the more stringent requirements of the American standard. Accuracy of the machine is verified by Proof Test by testing standard test specimens supplied by the NIST, USA. These are present as two sets (Low & high energy-1 Set (4 Nos.) each.) which must agree with the normal values within certain tolerance specified.

Automatic impact testing machines are also available with optional accessories such as:


* Caliper gauge for checking V notch for Izod & Charpy
* Templates for checking 10 x 10mm. cross section of Izod/ Charpy test specimen
* Depth notch gauge including V & U notch gauges for checking depth below V/U notch, angle and radius
* Y Izod support for 0.450" dia more...

Glass Agencies are manufacturer of Compression Testing Machine Electric Operated under EROSE Brand.

For determination of resistance to wear by attrition. Two iron cylinders 77/8" dia 133/8" long with dust and water-tight covers, mounted on a shaft with their axis inclined at 30 deg. to the axis of rotation of the shaft. Rotation speed is 30-33 r.p.m. Driven by 1 h.p. three phase 440 volts, A.C. Electric motor.   more...

 We are leading Suppliers, Manufacturers,  Exporters & Dealers for Gold testing Machine in India.  

Maxsell MXGPCi integrated industrial computers based on MXGPC platform additionally. It’s a stand alone integrated XRF gold testing instrument with inbuilt Monitor shows you the result instantly. With smaller foot print and due to integrated System, the unit saves space time. Specially Configured software & our technical knowhow helps the user get most accurate results. After sales service is the key, Maxsell has complete support to its customers and gives 100% backup across India. Our engineers are factory trained & We stock good levels of spare parts to support our customers.

Professionally designed with Multi-node pre-start installations and the real- time monitoring system, the MXGPCi is an intelligent design with Modern Aesthetics and appeal. In order to ensure the user security, it’s installed the automated more...

CTM (3000KN) Compression (Cube) Testing Machine Electrically  Cum-Hand Operated Pumping Unit. The double glunger pump is a motorized unit, which is housed in an elegant cabinet, is driven by three phase, electric motor 440 volts, A.C. supply (NB : Machine can be supplied for operation 220/230 volts. 50 cycles phase A.C. supply also-as may be indicated in the order.) The pumping unit is a separate unit connected to the jack by means of a steel connecting tube. A junction box is suitabily fixed to connect the motor to the main through the push bottom starter. The pumping unit is fitted with 20 cm dia dial pressure gauge (Hydraulic) with 200 division-in tones or in KN< (as per the rated capacity of the machine) A maximum red pointer is provided to facilitate taking reading after failure of specimens. The pressure gauge is fixed at an angle for easy readability. The machine is fitted with a hand wheel control, which enables the more...

We also manufacture a wide range of hose testing machines using high grade metal as per the standards laid down by the industry. This range of testing machines are offered with the features such as hydraulically operated motorized machine and therefore suitable for testing hydraulic pressure flexible hoses and other associated hose assemblies. We also offer customized designs of our hose testing machines in sync with the details of our clients. Salient features of our Hose Testing Machine are as follows: • Easy to operate • Come with oil and water as testing media • Available with extra burst apartment • Come with manual and PLC control mode • Pressure range up to 1000 BAR. more...

We are involved in the manufacture and supply of the Campbell Electronics new Tablet Friability Testers. These are designed to replace the bulky, troublesome and expensive models in the market. Friabilator has now become an accepted standard throughout the pharmaceutical industry for determining the resistance of tablets to the abrasion and shock experienced in manufacturing, packing and shipping operations. These FT-20 and FTA-20 are designed in accordance with the specifications as laid down in USP and other pharmacopoeia. The standard FT-20 operates at a constant speed of 25 RPM ±1. Further, it is used to run the test either one or two friability drums / one or two abrasion drums. These models can also be used with one friability drum and one abrasion drum for making comparisons between the two parameters under identical test conditions. Similar in construction to the FT-20, the friabilator FTA-20 differs only in having variable speed between 20 and 75 rpm and printer more...

Blood Vessel Testing Device Microscope more...

We are one of the leading manufacturers and suppliers of a wide assortment of Hardness Tester. Our range is checked on the various quality parameters and acknowledged for the unique features such as high performance, durability and easy installation. Furthermore, our team members allows us to meet the bulk demand of our clients within the committed time frame. more...

With thorough industrial knowledge, we are engaged in offering a wide range of Water Proffness Tester. These products are widely utilized in the commercial and residential purposes where bulk quantity of water is in demand. This range is ideally utilized for reducing the hardness of water appropriately and is offered at pocket friendly rates.   Features:

* Computerized automation
* User friendly operations
* High efficiency
more...

Model : YP8
Customer : Horizon Industrial Products Pvt. Ltd. New Delhi more...

We manufacture and trade impact testers, which is designed as per IS standard & charpy/izod & Impact tension calibrated scale with different strickers. These are widely used for laboratory testing and is available at industry leading prices to our clients.

This tester is used to measure the amount of fuel leakage in all Cummins PT injectors. Tests performed are tip seat leakage, barrel / plunger leakage and check ball leakage. Air pressure is directed to various passages to test the clearances or leakages of the injectors.

The Flexure Strength Testing Machines are designed to provide maximum rigidity throughout their working range. The load is applied by the upward movement of a hydraulic ram. The jack can be raised or lowered for testing different size beams. The load is indicated on a calibrated Bourdon tube type Pressure Gauge of range: 0-100kN x 0.5kN (0-10,000 kgf x 50 Kgf). The load gauge is calibrated against NPL/ NCCBM certified proving ring.

Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as foam, rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly. more...

Hand operated : proving ring type. Comprises of a hand operated load frame, cap. 30kn (3000 kgf. ) screw jack for loading, handle and strain dial gauge bracket, adaptor for proving ring, conical seats and male/female coning tools for 38 mm dial samples. Supplied without proving ring and dial gauge.

 
Motorized cum hand operated : comprises a screw operated load frame capacity 50 KN (5000 kgf. ) with a gear box and motor drive giving 1. 25, 1. 5 and 2. 5mm/min, rates of strain, pair of cone seating, adaptor for proving ring and strain dial gauge bracket. Supplied with one pair of male/female coning tools for 38 mm dia samples but without proving ring and dial gauge. Suitable for operating on 230 volts, single phase ac supply. Relevant standard : is : 2720(part-x). Is : 4332(part-v) more...

We are providing online test systems for washing machines. These test systems for washing machines are common tests which are used in any electrical appliance testing. We can offer panels for specific tests related to a particular product. Washing machine production line test system consists of. Meggaer Test Panel

* Application of 500 V DC
* Leakage current limit programmable
* Earth continuity testing
* Buzzer indication on fault

Wash Test Panel

* Testing at low and rated voltage
* Measurement of power consumption at various voltages
* Power measurement in clockwise & Anti clockwise drum rotation
* Limits user programmable

Spin Test Panel

This is similar to wash test panel, dedicated to test the machine during spin test.
HV Test Panel

* Insulation resistance more...

Our organization has gained vast expertise in offering a superior range of Color Matching Cabinet (Premium). These are manufactured using best grade raw materials and in compliance with industry standards. These are widely used in dye houses, factories and laboratories. Our range s highly appreciated for its features like maximum durability and corrosion resistance. We supply these in various specifications, clients can avail our products at competitive prices.
Technical Specification:
* Cabinet is completely made of MS Sheet with interior paint matching with Mussel N7 neutral gray paint and exterior powder coating with metallic finish.
* Inclined viewing plate of 450 angle is supplied along with machine.
* All tube lights are operated separately by Electronic Ballast for instant start, power saving and to prevent expensive tube lights.
* Control panel is ergonomically designed more...

We offer agilent & narda spectrum analyzer with 3D Isotropic  antenna .
Providing sheets as per TEC Formats.

High-precision, cost-effective signal investigations. It provides a large number of measurement functions and of a mobile radio base station for development and service – an extensive range of applications. precise measurements a frequency-selective receiver with high sensitivity, a large dynamic range and precise measurements of the field strength is required. for accurate and reproducible measurement results.   • Broadband & Frequency selective measures.
• Superfast REALTIME display
• Shows puls/modulation frequency!
• PEAK, PEAK Hold and average (AVG)
• Direct display in v/m and w/sqM (switchable)
• Full 70dB dynamics WITHOUT switching
• High-performance DSP (Digital Signal Processor)
• High resolution more...

SIMPLETEC 150T Rail Testing Machine is designed for testing of rails after welding. Parameters like pressure, tonnage and displacement against time, are displayed in a graphical format on the monitor of the desk top computer provided with the machine. The readings can be obtained in tabular form also. The entire test results are continuously displayed on the monitor and stored in the computer hard disc. Pressure, tonnage and displacement are also displayed on a big size HMI placed in the control pendant. more...

Properties:- 
Applications :
* High performances, high resolution test for routine and complex tests and calculation with measurement of sample strain.
Main features:
* High precision and resolution
* Control system by PC and keyboard
* User friendly software for management of the console also for non-expert users
* Performance of many types of tests
* Software calibration
* Real time monitoring of test data (load, stress, strain, time) either in graphic format or as data
* Real time processing of test data (e.g. determination of E-modulus) either in graphic format or as data
* Load- hold function (Optional)
* Input of dimensions and descriptions of the sample: age, preparation, etc.
* Input of descriptive and administrative test data: client, test centre, place of test, etc.
* Input of test parameters and settings: load more...

For the determination of resistance of aggregate to wear by abrasion. Two hollow cylinders, closed at one end and provided with tightly fitting covers at the other end. The inside diameter of the cylinder 20 cms and 34 cms depth. The cylinders are mounted on a shaft at an angle of 30° with the axis of rotation. The shaft rotates at 30-33 rpm through a reduction gear, coupled to a motor. Suitable for operation on 440 volts, three phase, 50 cycles, AC supply. Supplied complete with a counter and push button starter. With 12 nos cast iron spheres or steel spheres (steel balls) hardened, approx. 48 mm in diameter, each weighing 380-445 gm.

Related Standard : IS : 2386 more...