Products Directory > Scientific Instruments & Supplies > Testing Equipment & Machines >
Testing Apparatus
Products - 130
|
Testing Apparatus |
Displaying 1-50 of Total 130 Products Found |
-
Products
- Description
- Supplier Information
TUMBLING BARREL AS PER IS: 1293,1988, CLAUSE:23.2
It's used for testing mechanical strength of electrical switches of 6A/16A/32A.Control panel made up of MS powder coated finish with wooden tumbling barrel as per IS specification with sliding acrylic door. The wooden tumbling is freely rotated at a constant speed of 5rpm by the constant speed gear motor. Digital rotation counter cum indicator controls the number of rotation of the wooden tumbling barrel. The number of rotation is fully programmable and settable with the help of membrane keys of digital rotation counter.- Global Corporation
Ductility Testing Machine Electrically Operated for determining the ductility of asphalt, cut bitumen and blown type bitumen. The Machine consists of a bath thermostatically controlled with inlet and outlet taps. It is equipped with an electric pump circulator and heater. Designed to test three specimens simultaneously. The machine consists of a carriage moving over a lead screw. Fixed and movable brackets are so positioned that specimen is submerged in water throughout. A clutch arrangement is made to stop the movement of the movable bracket when rapture of the specimen is noticed. An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation. The rates of pull / travel, i.e, 50mm/min and 10 mm/min are provided. Suitable for operation on 220V, 1Ph, 50Hz AC Supply. more...
- Accro-Tech Scientific Industries
Campbell Electronics new Tablet Friability Testers are designed to replace the bulky, troublesome and expensive models in the market. Friabilator has now become an accepted standard throughout the pharmaceutical industry for determining the resistance of tablets to the abrasion and shock experienced in manufacturing, packing and shipping operations. Campbell Electronics friabilators FT-20 and FTA-20 are designed in accordance with the specifications as laid down in USP and other pharmacopoeia. The standard FT-20 operates at a constant speed of 25 RPM ±1. Can be used to run the test either one or two friability drums / one or two abrasion drums. These models can also be used with one friability drum and one abrasion drum for making comparisons between the two parameters under identical test conditions. Similar in construction to the FT-20, the friabilator FTA-20 differs only in having variable speed between 20 and 75 rpm and printer interface facility.
Salient more...- Pharma Chem Machineries
Ductility is a process defined as distance in cms to which a standard briquette of bitumen is stretched before the thread breaks. Attached briquette is stretched at a rate of 50mm/minute ±25mm per minute at a temperature of 27ºC ± 0.5ºC. Some of the essential features of our products are: more...
- Rupson Industries
We offer a wide range of de- mattia flex tester that is built on a rigid metallic base plate and come in grey hammertone stoving painting and bright chrome / zinc plating finishes. This comes with the feature like corrosion resistant. This provides useful information about the resistance of compounds of vulcanized rubber to flex cracking when subjected to flexing.
Feature:
• Consists of a set of grips to hold test specimens in two tiers with their holding faces lying in the same vertical plane
• The flexing and unflexing action is provided by holding one end of the test specimens in a fixed grip and the other end in a reciprocating grip
• Use for Coated Fabric & Rubber)
• Different models are available- Asian Test Equipments
Clock testers are used to check the deviation rates in wrist watches having period of balance wheel oscillations in 0.2 sec, 0.33 sec, 0.363 sec, 0.4 sec, 0.5 sec and 0.6 sec.The important features and specifications are as follow: more...
- Sigma Electro Systems
ADVANCED PROGRAMMABLE DIGITAL TABLET DISINTEGRATION TEST APPARATUS MODEL: VTD-AVP. more...
- Veego Instruments Corporation
Our range of C.B.R test apparatus are accommodated with regular accessories such as proving ring, dial gauge, penetration piston. Its face diameter is of 50mm and comes with adjustable bracket. It also consists of a perforated plate that has a removable handle and comes in size of 148mm diameter X 47.7 mm height. The annular metal weight of the apparatus is around 2.5kg for 147mm dia with 53mm dia. Slotted metal weight of the test apparatus is 2.5kg provided 147mm dia with 53mm dia slot. It can be availed in manually operable or motorized models. It consists of load frame with 1.25mm/min rate of strain and can be ideally operated on 230V.
- Acquavir International
We manufacture California bearing ratio (CBR) test apparatus for our clients. These are used for determining the bearing ratio of soil. Further, the other functions of our range include :
• Covering the evaluation of the relative quality of sub grade soils and also keeping a check on bearing value of soil- Testwel Instruments Company
We offer motorized test stands of IMADA, which are leading manufacturers of strength measuring instruments. The products are widely used in automobile industry for strength tests at the front line of quality control. These products are offered to customers at the most competitive prices at our end.
- Bhagwati Hardware & Mill Store
Model No – (C- TD-20)
Features : more...- Pharma Chem Machineries
Our wide range of bursting strength tester are manufactured using superior grade raw material to ensure durable performance at client's end. These are available in varied specifications, which can also be customized as per the application needs of the clients.
- Testwel Instruments Company
We supply direct shear apparatus that are provided with standard accessories. These accessories include shear box, specimen cutter, set of weights, proving ring and dial gauge. Its motor has variable speed rates of 12 types such as 1.25, 0.625, 0.125, 0.05, 0.01, 0.005, 0.002, 0.001, 0.0004 and 0.0002 mm/min. It perfectly works with 230V of power.
- Acquavir International
Our liquid limit device consists of a brass cup held on an adjustable bracket and the cup can be adjusted for a fall of 1cm. The device is raised and dropped on a rubber base of standard hardness by cam action. We are offering twp types of liquid limit device such as: more...
- Rupson Industries
It is manufactured in small lots and stored after thorough in process testing. This table has a 24’’ plate on top of it and it is modularity designed.The features and specifications are as follow: more...
- Sigma Electro Systems
We offer a wide range of tearing tester that consists of a brass sector pendulum pivoted on anti friction ball bearings over a vertical bracket fixed on a rigid metallic base. Our product has the capacity of testing tears of 1600 gm/ 3200 gm/ 6400 gm /12800 gm /25600 gm.
This tester is applicable in tearing resistance test of films, laminated films, foils, papers, textiles and non woven.
Features:
• Conforming to state standards and compatible with ISO and ASTM standards
• Computer controls, Windows operation system,professional software
• Rapid data gathering, high and reliable
• Pneumatic system clamps specimens and releases
• Tearing range is easy to change
• Selectable capacities of pendulum
• Assistant system of horizontal adjustment by computer
• Computer controls test, multifold units display
• Database mode storage, format is easy to change
• Easy to operate- Asian Test Equipments
Model : VTD-S more...
- Veego Instruments Corporation
Flash & Fire Point Apparatus used for determining the flash point of fuel oils and lubricating oil, bitumen other than cutback bitumen and suspension of solids in liquids, having a flash point above 49°C. The apparatus consists of brass test cup with handle removable cup cover with the spring operated rotated shutter having oil test jet flame device, stirrer with flexible shaft. The assembly rests in Air Bath which is covered with dome shape metal top. The cup assembly is positioned in a cast iron air bath, fitted with a chrome plated brass top having electric heater with temperature controller. Suitable for operation on 220V, 1Ph, 50Hz AC Supply. more...
- Accro-Tech Scientific Industries
We manufacture and export laboratory hot plate round. Its body is made of PC.RC. sheet which is duly painted with attractive stove enamel. The top cast iron heating plate is round having 20 cm. dia, with heating elements of 1.5 KW rating. The temperature is controlled by energy regulator upto 350°C.
- Star Laboratory
To check the specific gravity of rubber and other elastomers, we offer technically advanced “HIROSHIMA” Specific Gravity Balance. Its faster and accurate readings can give results in about half a minute. It is provided with an anodized scale with a balancing arm at center that stands vertical on the base plate and is printed with specific gravity (SG). To reduce friction, the scale is supported with two jewel bearings. The short length of the yarn is attached to one pin of the arm and the long length of the yarn is attached to another. To immerse the second pin in water a tall transparent jar is used. The pointer that is attached to the other end of the arm indicates the specific gravity of the concerned sample. The tester is also provided with a sliding weight for balancing different weights of sample in initial stages. The specific gravity tester is available in different modals. more...
- Apex Enterprises, Kandivli, Mumbai
California Bearing Ratio Test
The equipment consists one each of the following: Load frame, Hand operated, Capacity 5000kg. with high and low rates of travel of the load screw. Mould made frame Gun-metal / Brass, 150mm internal dia x 175mm high, with perforated base plate and extension collar 50mm high. Penetration piston, face dia 50mm with adjustable bracket for penetration dia gauge. Circular metal space disc, 148mm dia x 47.7mm high, with detachable handle. Annular metal weight, 2.5 kg., 147mm dia with 53mm dia central hole. Slotted metal weight, 2.5 kg., 147 mm dia with 53 dia slot. Perforated plate made of Gun-metal / Brass 148mm dia with adjustable stem and lock nut and a metal tripod for dia gauge. Cutting collar, Rammer 2.6 kg. weight with drop of 310mm. Rammer 4.89 kg. with drop of 450mm. Supplied without proving ring and dial gauge. more...- A 2 Z Global Trading
The knee point voltage test kit is a portable apparatus which is designed for checking the knee point voltage of protection class current transformers having secondary current ratings of 1 A and 5 A. There is a possibility of occurrence of faults in every day operations of electrical power system. Since protection class current transformer in the system is called into action to deal with a fault once in a long while, its failure to operate correctly on that occasion means avoidable damage to plant or waste of money spent on installation.Periodic field testing and testing prior to commissioning of the current transformers is the best way of ensuring the integrity of the electrical power system, since it cannot be readily tested under normal operating conditions. Hence this test kit is a must for every substations.The knee point voltage test kit are voltage injections sets which provide the necessary voltage for both 1 A and 5 A secondary rated more...
- Industrial Components Corporation
We are a leading name engagd in the manufacturing of superior quality pilling tester, which is made as per industry standards. These testers are widely used in textile industry for checking the hair ball capacity of fabric and knit fabric cloth. The product is offered at the most competitive prices and shortest delivery timings to client.
- G. S. Instrument Co.
We are offering high quality autocollimators that have a reflex viewing system and are equipped with a light source that projects the reticule infinity image on the film or a mirror at the film plane. The benefit of auto collimators is that the image is viewed back through the lens by the eye by a beam-splitter.
The image is quite dim reflected off from the ground glass but the good point is that it can be viewed through the eyepiece to check correct position of the ground glass.- Samit Enterprises
Halogen acid gas tester provided by us is used to measure the amount of halogen acid gas and hydrofluoric acid circulated during the burning of compounds. The compounds are those based on halogenated polymers and compounds containing halogenated additives taken from cable insulation and outer sheath.The instrument is manufactured as per IS 10810 part & also as par IEC-754 part 1&2Attachments: more...
- Shanta Engineering
As per IS: 1203 - 1978
The apparatus is available in two versions, Hand operated and Electrically operated (Automatic) with digital timer. The apparatus consists of a cast aluminium base with an iron stand on which moves aluminium arm. A 15cm dial is fixed on this arm and a brass rod slides through the lower portion of the arm. A needle with weight is fitted to this rod. The dial is graduated from0-400 in one tenth millimeter sub division. Supplied complete with adjustable needle holder, penetration needle, sample container, transfer dish and weights – 50gm & 100gm.
The Automatic model is supplied with automatic digital timer and electrical arrangement to carry out the test with ease and accuracy. more...- Dynamic Engineering Co.
We manufacture and supply AIV apparatus, which are conforming to IS 2386. These machines are used for determining the aggregate impact value. The sturdy construction of our AIV apparatus consists of base and support columns to form a rigid framework around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall are adjustable. The hammer is
provided with a locking arrangement. The apparatus is supplied complete with cylindrical cup, metal measure and tamping rod. Our range of AIV apparatus has been designed in a particularly heavy-duty form, with specially hardened steel surfaces for minimum wear.- ACME Scientific International
We offer wide gamut of apparatus that find their applications for metal testing. The wide spectrum of equipment that we provide includes Abrasive Cut off Machine, Bending Test Apparatus for Wires, Fatique Testing Machine, Mounting Press, Pendulum Impact Testing Machine, Polishing Machine, Torsion Testing Machine, Wire Torsion, Wire Wrap Testing, Spring Testing Machine, Tensile Testing Machine and Cutting & Grinding machines. Technical specification of aforementioned apparatus and equipment are mentioned below:Abrasive Cut off Machine more...
- Unique Scientific Instruments
We fabricate and supply a gamut of bomb calorimeter that has bagged high appreciation for the rapid and accurate determinations. Its compact size enables it to fit more systems into a standard laboratory. The fully automatic mode of this calorimeter offers accurate temperature reading and easy calculations. Some of the salient features of the bomb calorimeter include: more...
- Metal Power Analtyical (I) P. Ltd.
Our range of microprocessor based digital tablet dissolution test apparatus is used for routine quality control test. It can be used for six and eight tests. Some of the features of our microprocessor based digital tablet dissolution test apparatus are. more...
- Agarwal Brothers, Jaipur
We supply Enerac 3000E series emission monitoring system. Meets All the Performance specifications of EPA's Test Method for the determination of nitric oxide, nitrogen dioxide, and NOx emissions from stationary combustion sources by electrochemical analyzer, CTM-022. (Performance specifications are equivalent to method 7E)
Meets all the performance specifications of EPA's method 2, determination of stack gas velocity and volumetric flow rate (Type S Pitot Tube), 40 CFR 60 appendix A.
Important QA/QC capabilities are always available to insure accurate, documented, defensible data. They include: more...- Navtek Instruments (India) Private Limited
Our test sieves are available in one piece frame of 4" diameter and also available in sizes of 1-1/2", 3", 5" and 6" diameter with suitable lid and receiver. Its frame is made up of spun brass and without any joint in it. It has clean rigid design of minimum weight and free from corners where the material could be lodged. An essential feature of test sieves is that the mesh should be flat, taut and uniform and with permanent tension round the whole circumference. Following are some other features of our product: more...
- Kartar Engineering Works Delhi
A quality conscious firm, we are engaged in offering superior quality bitumen testing equipment. The Bitumen extractors available with us are one of the most reliable apparatus used by highway departments, contractors, engineers and testing laboratories. The different applications where our Bitumen extractors are used are:
• Sampling
• Penetro-meters
• Flow cups
• Bitumen flow
• Softening point
• Ductility
• Road surfacing testing- Pradeep Trading Company, Delhi
Known for offering premium quality products, we are specializing in the manufacture of top quality Linen Testers that are specially designed for professional use. Our handy range can be easily carried and are also easy to operate. These Linen Testers can be used by the textile industries, artists, astrologers, draftsmen, surveyors, drawing offices, jewellers, laboratories and many more.
- Accuratus (India)
The apparatus consists one each of Compaction Mould Gun Metal, 100 mm I.D. x 127.3 mm height x 1000 cc. volume, complete with collar and base plate. Rammer 2.6 kg x 310 mm controlled fall.
- Shambhavi Impex
We offer vicat apparatus, which are used for determination of normal consistency of hydraulic cement, gypsum plaster and lime and setting time of cement, gypsum plaster and gypsum concrete. These consist of the following: more...
- Hydraulic & Engineering Instrument
Our range of slump test apparatus are used for the determination of the consistency of freshly mixed concrete where the maximum size of the aggregate does not exceed 38mm. These consist of one slump cone with handles and foot pieces.
The specifications of our products are:
more...- Scientific International, New Delhi
Flex durability tester is applicable in the flex resistance test of flexible films, laminated films, coated films etc. It can simulate the straining, creasing action to the film during producing, processing and transportation. After the test, determine the flex resistance of materials tested by measuring the changes of pinholes or barrier properties, providing criteria for packaging design and practical application.
- Labthink Instruments Co. Limited
We bring for our clients Marshall stability test apparatus. These apparatus are reliable for conducting Marshall stability test. The stability test of cylindrical specimen of bituminous paving mixture is the most frequently used by highway departments, contractors, engineers and testing laboratories. Through this test, we are capable of measuring the resistance to plastic flow of cylindrical specimen of bituminous paving mixture loaded on the later surface for use with the hot mixture containing asphalt or tar. Our Marshall stability test apparatus consists of:
• A loading unit motorized, capacity 5000kgf with two pillars and an adjustable cross head.
• High quality compaction pedal with specimen mould holder.
• Two compaction rammers, 4.5kg weight and free fall 45.7cm.
• One breaking head assembly with provision to fix flow meter.
• Three specimen mould 10.16cm I.D. x 7.6cm high with base plate and extension collar.
• One kit for specimen more...- Pradeep Trading Company, Delhi
Light Fastness Tester
Description: For determining light fastness of textiles against MBTL fading lamp. Providing with 4 Nos. sample holder, hour meter with buzzer, cooling arrangement with pump & water tank. more...- A 2 Z Global Trading
Our range of rapid moisture meters sieve shaker are light in weight, portable and suitable for bench mounting. These are incorporated with a heavy fly wheel, which ensures smooth operation. Further, our range is offered at industry leading prices. more...
- Kartar Engineering Works Delhi
Used to determine grade of bitumen. The penetration tests determine consistency of bitumen for the purpose of grading. Depth in units 1/10 of millimeter to which a standard needle having a standard weight will penetrate vertically in a duration of five seconds at a temperature of 25ºC determines penetration for gradation.
- Shambhavi Impex
We offer aggregate impact value test apparatus that work with precision in their desired application. These equipment comprise a circular base with two vertical guides. The hammer of weight 13.75 ± 0.25kg can be lifted to fall freely down the vertical guides. The height of fall can be set through 380 ± 5mm. The hammer is offered with a locking arrangement. The hammer falls freely to the base and can be removed.The aggregate impact value test apparatus is supplied with metal measure 75mm diameter x 50mm high and tamping rod 230mm long x 10mm diameter with/without blow counter. more...
- Universal Scientific & Testing Equipment Co.
We offer Button and Snap Pull Tester to check the pull strength of any type of button or snap fixer in the garment. This is also available with kg / Newton or pound output.
Capacity: 20 kg.
Related Standards:
• ASTM Designation: D 484688
Standard Test method for Resistance to Unsnapping of Snap Fasteners
• CFR Part: 1500 . 5053
Consumer products safety Commission
• ASTM Designation: D1776ASTM PS 79 - 96- G. S. Instrument Co.
We provide Izod and Charpy impact tester that is used to test rubber and plastic material as per ASTM D-256 standards. It checks the ability of plastics and electrical insulating materials to withstand breakage by flexural shock. This is indicated by energy extracted from standardized pendulum type hammers that are generally mounted on standardized machines that breaks standard specimens with pendulum swing. This energy that is absorbed per unit of specimen width is measured in joules.Specification: more...
- Shanta Engineering
We offer highly accurate range of tablet dissolution test apparatus, which has digital speed indicator unit and temperature indicator cum controller. It is used for single test only. Some of the specifications of our digital tablet dissolution test apparatus are more...
- Agarwal Brothers, Jaipur
Our domain expertise enable us in designing and developing a wide range of COD digestion apparatus. These are fitted with digital temperature controllers, buzzer and timer for 2 hours. Further, our range is available in the following specifications: more...
- Biological Enterprises, Delhi
As per IS: 1205 & IP 58:
The apparatus is mean for determination of softening point of bituminous material. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fell a required distance under test condition.
The apparatus consists of heat resistant glass beaker, two steel balls each of 9.5mmdia., two tampered brass moulds, two ball guides, ring stand. Supplied with electrical heating unit, provided with energy regulator to control temperature. In addition, there is an electrically operated stirrer mounted on a stand for stirring the water in beaker.- Dynamic Engineering Co.
We manufacture student polarimeter which consists of laurent half shade, polariser, analyser, brass scale graduated from 0 to 360° or 0.180 with vernier reading 6" and accommodates a 200 mm. glass tube. It is packed in a card board box.
- Star Laboratory
We offer broad range of soil testing machines more...
- Unique Scientific Instruments
