Products Directory > Scientific Instruments & Supplies > Testing Equipment & Machines >
Tensile Tester
Products - 35
|
Tensile Tester |
Displaying 1-33 of Total 35 Products Found |
-
Products
- Description
- Supplier Information
Digital Universal Testing Machine more...
- ETS Intarlaken Technologies
This tester was ergonomically designed to provide a compact, low-cost, functional unit which is quick and easy to operate. It gives extremely high accuracy and yet is robust enough for routine quality control testing. The twin column design permits all-round access to the specimen and grips. ETS Electronic Tensile Tester is suitable for testing tensile strength and elongation of various materials such as metal rubber, plastic, leather, asbestos, PVC, paper, textile, Wire/Cable, plywood/wood, ceramics, rexins etc. in confirmity with standards like ISS, BSS, ASTM, DIN or ISO. Compression and Bending tests can also be conducted on the machine with the use of special test attachments.
The load measurement system utilizes a four-figure peak picking digital voltmeter which displays maximum load until reset. The use of digital roadouts for load and extension (optional) eliminates the high risk of error involved when interpolating from graphs, dials and scales. The elongation is read more...- ETS Intarlaken Technologies, West Bengal
Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.
Range available 1 kg (10N) to 10000 kg (100 kN)
Speed: step speed, variable speed available
Model : analogue/digital/computerized model available- Asian Test Equipments
We offer Digital Bursting Strength Tester (Burst–O-Matic) – Uniform Hydraulic Pressure produced through electric motor and gear with fully automatic control for pneumatic clamping of specimen and testing cycle. Complete with memory for retaining peak value, automatic or normal zero setting, overload and over protection facilities.
- Universal Engineering Corporation, UP
Rajco Tensile Testing Machine are used for wide variety of materials for their tensile strength and elongation. The materials include wires, cable, plywood, conductors, ferrous and non- ferrous materials, cloth, fibres etc.
The machines are manufactured in various capacities and test appropriate traverse speed and using suitable grips in conformity with ASTM, DIN, BIS, BSS standards.
These machines are fitted with over-travel safety switches suitable for 230 V AC supply.
SPECIFICATION : more...- Rajco Scientific And Engineering Products
The ETS Computerized Universal Tensile Tester is the cumulation of years of experience by one of the world’s leading manufacturers of materials testing machines. This new tester is designed for a wide range of applications including: Bending,Compression, Tensile Testing and Peeling using appropriate test attachments which are optional.
The tester offers excellent accuracy and ease of use. It is strong and durable enough to withstand many years of use, yet it has a compact load frame that provides greater flexibility of placement.
Whether you choose the basic unit or add the optional advanced software package, the tester sets the standard in Universal Tensile Testing.
The load cell used in this tester offer one-touch zero adjustment and load cell capacity discrimination guarantees accuracy and speeds the setup process.
This is particularly important when multiple tests are being performed.
Software Package:
The tester offers a host of software features that allows more...- ETS Intarlaken Technologies, West Bengal
We offer heavy duty tester to determine the compression strength of corrugated & non-corrugated boxes. The instrument provide the Digital Display of compressive Load for determination of box compression strength. Complete with memory for retaining peak value, automatic or normal zero setting, motorized version with DC drive and DC geared motor provide the variable compressive speed, overload and over travel protection facilities.
- Universal Engineering Corporation, UP
Universal Tensile Testers more...
- ETS Intarlaken Technologies
We offer smoothness and porosity tester for determining the smoothness and porosity of paper and board. based on rotameter airflow principle. Provided with three imported variable area flow meters (Rotameter) and accessories.
Measuring range
•5-150ml/min.
•50-500ml/min.
•300-3000ml/min.- Universal Engineering Corporation, UP
This tester was ergonomically designed to provide a compact, low-cost, functional unit which is quick and easy to operate. It gives extremely high accuracy and yet is robust enough for routine quality control testing. The twin column design permits all-round access to the specimen and grips. ETS Computerized Tensile Tester is suitable for testing tensile strength and elongation of various materials such as metal rubber, plastic, leather, asbestos, PVC, paper, textile, Wire/Cable, plywood/wood, ceramics, rexins etc. in confirmity with standards like ISS, BSS, ASTM, DIN or ISO. Compression and Bending tests can also be conducted on the machine with the use of special test attachments.
Features : more...- ETS Intarlaken Technologies, West Bengal
Compact Digital Universal Tester more...
- ETS Intarlaken Technologies
Universal Tensile Tester more...
- ETS Intarlaken Technologies
We offer tesnsile strenght testers for determining the tensile strength and stretch at break of the paper, board, metal foil, textile and plastics.
D. Electronic Tensile Tester (Vertical Model, Microprocessor Based) – for providing rapid and efficient determination of tensile strength, stretch and tensile energy absorption of paper and paperboard with in-built printer and imported load cell and imported DC Drive. Complete with memory for retaining peak value of load, automatic zero setting, overload and over travel protection facilities.- Universal Engineering Corporation, UP
It is electro mechanical machine with digital display of load and displacement and pulley belt system for changing speeds, the machines are designed for testing various materials with suitable grips and fixtures.Specification: more...
- Shanta Engineering
It is applicable in many properties test of plastic film, complex film, flexible packaging material, adhesive, adhesive tapes, glue, rubber, paper, and plastic aluminum board. The test items include tensile, peel, ripping, hot-seal, bonding, shear, etc.
- Labthink Instruments Co. Limited
Tensitron's digital force gauge measure from 0.5 pounds up to 500 pounds over several models. Basic models are available with no computer outputs, as well as highly sophisticated units that provide memory, a variety of outputs, and the ability to compute statistics.
Ergonomically designed to fit in the palm of your hand, the rugged, all-metal construction of the microprocessor-controlled FGV and FGE Series permits accurate measurement of compression and tension forces up to 100 pounds (force testing 0-500 pounds is available using the FGV-H and FGE-H Series gauges). With the same superior accuracy of the DFS series, the FGV and FGE feature a unique, push-button inverted digital display, permitting the user to read the display in a right side-up fashion. For handheld or test stand mounting use, the FGV and FGE are ideal for R&D, OEM and production floor applications. The FGV Series includes all FGE features plus RS232C and analog outputs and an overload output signal.
The more...- Navtek Instruments (India) Private Limited
Designed as per ASTM D-638 and suitable to test as per all other standards.
The latest material testing system, ideal for research and quality control testing of composites and rigid plastics, as well as low force materials such as paper, films, rubber & textiles.
The models are:
SEMI-DIGITAL, FULLY DIGITAL & COMPUTER OPERATED.
SEMI-DIGITAL:
Digital Indication of Load & Elongation. Highly Accurate Load Cell.
Load Range: As per the requirement.
Elongation: 0.2 resolutions through encorder.
Auto Tarring System, Auto Stop Facility & Self Calibration System.
Over Load & Excess Traveling Precaution.
Speed: 50, 100, 250 & 500mm/min. Or 1, 50 & 100mm/min.
Speed will be changed by belt system. Screw system provided to change the belt easily.
Hard chrome plated & toughened screw.
Single Phase, 220/230v.
Paint: Powder Coated.
FULLY DIGITAL:
Digital Indication of Speed, Load & Elongation.
Highly Accurate Load Cell.
Load Range: As per the requirement. more...- Veekay Testlabs
Our universal testing machines are largely admired by the industry and find a wide application. It has been specialy designed for testing metals and other materials under tension, compression bending, transverse and shear loads. It is equally suitable to carry out hardness test on metals. more...
- Testwell Instruments, Ichalkaranji
We also manufacture universal testing machine electronic model. This delivers accurate results without delay. It saves time and labor, and enhances the working procedure. It is also used to test tensile, compression, bending and shear tests on metals & other materials, both in the form of test pieces and as finished products.
- Aditya Instruments
Tensile Testing Machine is used for wide variety of materials for their tensile strength and elongation. The materials include wires, cable, plywood, conductors, ferrous and non- ferrous materials, cloth, fibers etc.
The machines are manufactured in various capacities and test appropriate traverse speed and using suitable grips in conformity with ASTM, DIN, BIS, and BSS standards.
These machines are fitted with over-travel safety switches suitable for 230 V AC supply.- Associates Scientific International
• Capacity of the tester : 0-2500N (250Kg) or 0-500Kg/0-500N
• Sensitivity : 50 and 100gms
• Speed of the tester : can be 50,100 250 or 300mm per minute as required.
• Minimum grip Separation : 25mm
• Minimum grip Separation : 750mm
• Motor : 1/4hp. Single phase 220v, 80rpm AC
• Power consumption : 1 Kw
Related Standard:
• BS-1610, bses-10023, ASTM-E-4, DIN-5122/1- Universal Textile Industries
We offer a wide range of tensile testing machines, which are suitable for tensile testing of non-ferrous metals, cables, wood, wires, paper, resin, plastic, rubber, fabrics, etc.
Specifications more...- Material Testing Machines Services
Tensile Tester for fabric (Model HF) and ROPE (Model HR)
An electrically operated floor mounting machine for determining the tensile strength and elongation of fabric (model HF) and ropes (model HR)
Available in the following capacities
1. 0-1000 kgf x 2 kgs with an additional range of 0-500 kf x 1 kg
2. 0-2000 kgf x 4 kgs with an additional range of 0-1000 kgf x 2 kgs
Traverse speeds 100, 150, 300 and 450 mm/ min through multi-speed gear box
• Grip separation:
Model HF – Min, 100 mm, Max , 400 mm
Model HR – to suit your requirements
• Travel of moving grip Model HF -300 mm, Model HR -1200 mm
• Elongation scale smallest division – 1 mm
• Accuracy of measurement to within ± 1% above 1/10th of the scale value
• Over travel safety included
• Power supply 3 PH 440 V 50 c/s A- Kamal Metal Industries
We manufacture and supply Tearing Strength Tester by using high quality raw materials. It is checked at each stage from designing till final product development to ensure the quality. This tester is used to determine the ballistic tearing strength of textiles.
- G. S. Instrument Co.
Analogue Tensile Testing Machine more...
- Fine Spavy Associates & Engineers Private Limited
The electronic tensometer offered to clients is a compact tensile testing machine which is fitted with load cell for load measurement. We offer a choice of over 100 accessories and attachments with the products. They have got high performing rate and a compact, versatile nature as well.
These products are available in different variants, which comprise of distinguishing features such as:
I. Electronic Tensometer ER1
It is the basic unit of a highly versatile testing system, which is used for conducting various types of tests such as: more...- Geetanjali Enterprises, Gurgaon
We offer HL692 series of universal testing machines that confirms to the testing procedures laid down in BIS , EN , ASTM and JIS standards. These are used for testing of engineering materials like metals, plastics, elastomers, papers and many others in compression and tension mode.
Further, our range is designed with one pillar for the loading units up to the range of 5 kN and two pillars for ranges above 5 kn. Our range also have ball screw driven through the highly sensitive servo motor. The rate of loading for testing is controlled by the computer and has step less loading with the rate of strain varying from 0.01 – 500 mm/min. Moreover, the setting of our range can be done at the speed of 1000 mm/min or more.
Apart from this, our system comprises of electromechanical load frame with data acquisition & control unit, software package, load cell, displacement transducer, a set of grips/jaws, standard computer. In addition to this, our machines also possess the following: more...- Hydraulic & Engineering Instrument
Tensile Tester for Leas of Yarn Model C
A power driven machine - wall mounting type - for determining the tensile strength and elongation of yarn in lea form.
Capacity: 0-200 lbs * 1 lb
Tracerse Speed: 12" P.M.
Minimum Grip Separation: 27"
Travel of bottom grip: 7"
Extension Scale: 0-6" x 1/4"
Accuracy of measurement to within ± 1% above 1/10th of scale value.
Power Supply - single phase 220V AC 50 cycles
Other capacities can be offered against specific request.
Equipment suitable for metric system can also be offered.- Kamal Metal Industries
This tester is applicable in tensile, peel, tearing, heat seal and adhesive test of plastic film, complex film, flexible packaging materials, adhesives, adhesive tapes, glue, rubber, paper etc.
- Labthink Instruments Co. Limited
COMPUTERIZED – TENSILE TESTING MACHINES more...
- Fine Spavy Associates & Engineers Private Limited
Electrically operated machines capable of determining tensile strength and elongation of Textile, Rubber, Plastic, Cables and Conductors, Leather, Asbestos, Paper, Plywood, Metal and other materials
Can text materials in conformity with IS or other standards
Models
• Mechanical version
• Microprocessor based version
• Computerized version
The Electronic Range
Test your products with pin-point accuracy
Due to its high functional capabilities and advance technical features more & more organizations are preferring electronic version
Simple to operate, No special qualification or skill required for operating the equipment.
Accuracy quality and performance – Comparable with any imported equipment
Reliability
KMI is the pioneer in manufacturing Tensile Testing Machines in India. Thousands of customers including institution like BIS, NPL and other rely on kmi equipments for testing their products.
Details technical more...- Kamal Metal Industries
Auto Tensile tester is designed and manufactured according to GB 17200, and its every capability conforms to relative test standards such as GB 13022, ZBY 28004, GB 8808, GB 1040, GB 6344, GB/T 16578, QB/T 1130, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB 4850, GB 7753, GB 7754, and GB 453. It is applicable in many properties test of plastic films, complex films, flexible packaging materials, adhesives, adhesive tapes, glue, rubber, paper, and plastic aluminum board. The test items include tensile, peel, ripping, hot-seal, shear etc.
- Labthink Instruments Co. Limited
The electronic single yarn tester is a microprocessor based wall mounting machine that is used for determining tensile strength and elongation of singe yarn with pinpoint accuracy as well as for electronic load & elongation measurement. It has a digital indication for breaking load & elongation. We can also offer load-elongation curve & tst-report printing facility by electronic printer as per the need of the customer. Some of the specifications of our range includes :
• Computer hookup facility
• Capacity - 2, 5 10 or 20 kg.
• Resolution - 2000 counts for each measuring range.- Kamal Metal Industries
