 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Plant & Machinery > Rubber Machinery & Equipment >
Rubber Mixing Mill
Products - 33
|
Rubber Mixing Mill |
Displaying 1-30 of Total 30 Products Found |
Products
Rubber Mixing Mills
Manufacture and supply hydraulic presses, Rubber machinery, Rubber Processing Machinery, turnkey plants to the worlds leading companies, we have continued to grow from the day our company was founded.
|
Santec Exim Pvt. Ltd.
ISO 9001:2000   |
|
Unidrive Mixing Mills more...
|
Ravi Engineering Works
ISO 9001:2000 |
|
Lab mixing mills are just like mixing mills but they are smaller in size. The rollers of lab mixing mill are made of cast iron rollers and possesses a good surface hardness. The rollers of lab mixing mills are cooled by water and heated by the steam inside. The motor pump of the mill is force-feed lubricated for recirculation of oil in brass. The manual grease pump is used for the lubrication of anti friction roller. The mill has low operating cost and is maintenance free. It is easy to install and its compact leaving space for maximum floor utilization.
|
Sant Engineering Company
|
|
"UTTAM" offers hydraulically operated Rubber Bale Cutter to cut natural or synthetic rubber bales in pieces for further processing in Mixing Mill, Kneader and Banbury.
Technical Specification
Total Covering Area : 38" L x 32" W x 84" H
Ram Stroke : 22"
Working Pressure : 0.80 Tons/in²
Cutter Force : 20 Tons
Cutter Length : 28"
Cutter Width : 5"
Motor : 3 H.P.
Tank : 65 Liters
To Slide Rubber : 6 Rollers Fitted
Ram : Hard Chromed
Cylinder : Honed, Pipe
Blade : Hardened Tempered H.C.S.
Hydraulic Power Pack : Gear & Plunger Type, Breather Filter, Oil Filter
D.C. valve : Directional Control Valve & Release Valve
|
Uttam Rubtech Machinery (P) Ltd
|
|
Considering the multi millions of tyres disposed of every year in all countries significant recycling opportunity exist for investors to earn dividends. More & more large volume uses are emerging for end products made from rubber, steel and textile derived from recycling tyres.
This quality material in crumb/reclaim form is capable of performing numerous task once applied to a variety of end products like tiles and tile adhesives, mixing with asphalt, sports surfaces, carpet underlay, noise and vibration insulation, playgrounds and matting. Rubber crumb/reclaim is used in new tyres/tubes, devalcanisation for low-tech pressed or extruded rubber products, tread rubbers, belting, battery containers, moulded item, commercial flooring, traffic control products and plenty more. Recycled rubber crumb is valued at about one fifth the price of virgin rubber so where it is interchangeable it has obvious demand. more...
|
Sant Engineering Company
|
|
It can be used in a wide range of material mixing ranging from low viscosity adhesives to high viscosity rubber. Maximum frame rigidity is achieved through computer aided frame design & finite element analysis.
|
Santec Exim Pvt. Ltd.
ISO 9001:2000 |
|
Lab Mill (Testing Equipment) more...
|
Ravi Engineering Works
ISO 9001:2000 |
|
"UTTAM" make heavy-duty single and double geared Refiner mill with bushes / roller bearings
Major Construction Details
1. Rolls :Alloy Chilled Cast Iron rolls with Surface hardness 510 ~ 550 BHN. The Rolls are mirror finished & polished, duly grinded and are hollowed for cooling.
2. Stand Frame & Apron (Cap): Heavy Duty Steel Casting / Steel Fabricated.
3. Journal Bearing Housing: Steel Casting Housing fitted with Anti Friction Roller Bearings.
4. Lubrication: :Manual / Motorized Grease pump for lubrication of Anti Friction Roller Bearings fitted in dust sealed housing.
5. Roll Clearance Adjusting Unit : With Hydraulic Cylinder and Hydraulic power Pack unit which tilts the mixing chamber for the discharging the mixture which provides TROUBLE FREE WORKING of the machine. As there is NO Wear & Tear of the gears like in the machines where Worm gear System is used for tilting chamber OR Breakage of the screw and nuts like in the machines more...
|
Uttam Rubtech Machinery (P) Ltd
|
|
Laboratory Rubber Mixing Mill Constructional Details :
Rolls : Chilled Cast Iron rolls with surface hardness 510 ~ 550 BHN. The Rolls are mirror finished & polished, duly grinded and are hollowed for cooling or heating.
Stands & Apron : Heavy Duty Steel Casting.
Bed : Common bed construction, Steel Channel and MS plate fabricated.
Journal Bearing Housing : Steel Casting Housing fitted with Anti Friction Roller Bearings.
Lubrication : Manual / Motorized Grease lubrication pump for Anti Friction Roller Bearings fitted in dust sealed housing.
Electric Control Panel : Star Delta Electric operating panel with Auto Reversing, Forward, Voltmeter, Ammeter arrangement.
Roll Clearance Adjusting Unit : NIP adjustment at two roller ends is done manually using two separate screws attached to the brass housing body.
Roll Cooling: Universal Rotary joints with inner Spray pipes with Hoses and more...
|
Uttam Rubtech Machinery (P) Ltd
|
|
Rubber refiners or unidrive refiner mill with anti friction roller bearings with helical gear box of elecon / shanti make.
|
Ravi Engineering Works
ISO 9001:2000 |
|
Considering the multi millions of tyres disposed of every year in all countries significant recycling opportunity exist for investors to earn dividends. More & more large volume uses are emerging for end products made from rubber, steel and textile derived from recycling tyres.
This quality material in crumb/reclaim form is capable of performing numerous task once applied to a variety of end products like tiles and tile adhesives mixing with asphalt, sports surfaces, carpet underlay, noise and vibration insulation, playgrounds and matting. Rubber crumb/reclaim is used in new tyres/tubes, devalcanisation for low-tech pressed or extruded rubber products, tread rubbers, belting, battery containers, moulded item, commercial flooring, traffic control products and plenty more. Recycled rubber crumb is valued at about one fifth the price of virgin rubber so where it is interchangeable it has obvious demand. more...
|
Sant Engineering Company
|
|
"UTTAM" make Uni Drive Rubber Mixing Mill with Anti Friction Roller Bearings with "UTTAM" make Gearbox. Designs are UPTO 30% Power Saving as compared to Conventional Mills.
Salient Features :
1. Superior Mixing Performance.
2. Low Operating Cost with High Productivity.
3. Compact Construction, maximum Floor Utilization.
4. Latest Technology Update, Meets Current World Standards.
5. Maintenance Free.
6. Reliable and Experienced Service Back Up.
7. Easy to Install & Ready to Run.
8. No continuous Lubrication hence heavy saving on lubrication cost, wear & tear and maintenance.
9. Auto reversing electric Panel.
10. Simple & easy maintenance.
|
Uttam Rubtech Machinery (P) Ltd
|
|
Combining our vast experience with extensive research and development, we have understood best the needs of retreaders and have shaped our machines accordingly. We have complete range of machines such as, Tyre Buff Machine, Tread Builder, and Curing Chambers etc., needed for retreading. Very few companies in the industry manufacture these machines under one roof.Tyre Buffer: This is a grinder like machine which has a self air filling system and buffs tyre under inflated condition without tube. The RASP carrying post moves forward / backward and has radius movement. This gives the tyre a flat and smooth surface.Tread Builder: Machine for building and two stages stitching of cold tread with cushion gum let-off facility. Machine directly driven by motor with different speeds is with forward / reverse drive. Retreading Machines: Combining our vast experience with extensive more...
|
Sant Engineering Company
|
|
Rubber Mixing Mills more...
|
Ravi Engineering Works
ISO 9001:2000 |
|
Are engineered to score over the conventional mills used for mixing of polymers between 2 rotating rolls in terms of higher efficiency and improved machine life. The transmission by 3-stage helical reduction gear box connecting drive motor to the rear roll coupled with anti friction roller bearings instead of bush bearings result in a substantial reduction in power consumption. Another futuristic feature on our mills is the optional addition of hydraulic sensing circuits incorporated for roll loading records of different batches / compounds.
Avail from us rubber mixing plant components, which features compact and robust construction, low noise and is equipped with safety features. It is offered at industry leading prices to our clients. The various components that we offer are:
Rubber Mixing Plant Components more...
The range of unidrive mixing mill or unidrive rubber mixing mill offered by us come with anti friction roller bearing with helical/worm gear box of greaves / elecon / shanthi or any other reputed make. These are available in 6" x 15" up to 26" x 84" sizes for different batch capacities.
Construction Features:
more...
Two Roll Rubber Mixing Mill more...
We offer precision engineered mixing mills that caters to the exact demand of rubber industry. Our range of rubber mixing mill is ideal for homogeneous composition of rubber with various ingredients. Our high capacity mixing mills are acknowledged for the compact design and reliability. more...
These machine features compact & robust construction, low noise & are equipped with safety features. Available in both conventional Bull gear design & unidrive type.
Our rubber mixing mills are widely appreciated for features like. These are provided with chilled cast iron rolls, leaded bronze bushes lined in cast iron housings and bull gear of cast iron/ steel. The mill also has pinion & friction gears of steel, both side gear covers, tray, and safety trip rod, with M.S. fabricated common base plate with reduction gear box. more...
We offer superior quality rubber mixing mills that are known to provide high performance and are manufactured as per the international quality standards. Our rubber mixing mill have reliable and experienced service back up. We offer mixing mill with chilled cast iron rolls with motorized or hand operated nip adjustment. It is available in various sizes such as 6"x16", 8"x18", 10"x24", 12"x30", 14"x36", 16"x42", 18"x48" etc. Rubber mixing mill are easy to install and maintained. Some of the features of our rubber mixing mill are: more...
We offer our clients advanced technology based gear type rubber mixing mills that features compact & robust construction, low noise and come equipped with all the necessary safety features to provide safe operation standards and durable functioning.
Features:
more...
The range of dispersion kneaders offered by us are ruggedly designed for meeting the mixing requirements of different kind of materials ranging from low viscosity adhesive to high viscosity polymers.
Applications:
more...
Two Roll Rubber Mixing Mill Duly Fabricated Body-15
UNI Drive Rubber Mixing Machine more...
The rubber manufacturing mills are used for pigment chips, rubber compounding and electronic grade rubbers. They are available with safety devices and other features keeping in mind the needs and requirements of different industry.
We offer mixing mills in various sizes of laboratory and general applications. Mixing mills and rubber mixing mills provided for laboratory are available in sizes of 6” x 12”.
Our mills are available in other sizes of 8"x18", 12"x30", 14"x36", 16"x42", 22"x66", and 26"x84".
Our products Kracker and Semi Kracker are provided in following size variants:
KRACKER: 24" x 36" and 22 x 50"
SEMI KRACKER: 14" x 36", 16" x 42" and 22" x 60"
Some salient features of our rubber mixing mills in this range are: more...
Our
Internal mixer is used for rubber and plastic compound mixing. It is
a rugged and versatile machine for fast mixing of material. This
machine is designed to suit for varied nature of dispersion mixing
jobs. We manufacture 60 LT, 75LT, 120LT and 250LT internal mixers.
These machines totally operate automatically with programmable rubber
temperature control system.
The
rotors provided are of two types; one is two wings type and another
is four wings type. These rotors are manufactured with very good
forged alloy steel. The edges of the rotors are hard facing due to
Stellite or Chromium Carbide welding rod. These rods are from Germany
and L&T Co. The temperature in the Rotor can be varied through
the water with temperature control system. more...
Rubber Mixing Mill more...
Category Matches
Related Trade Leads
|
|
We are offering rubber mixing mills with following specifcations:
- It is an essential laboratory equipment in the plastic & rubber processing in... (Sell) |
|
|
Selling rubber processing machines like rubber mixing mills, dispersion
kneader, extruder machines and colander machines. (Sell) |
|
We are looking for the second hand rubber mixing mill (baby
mill)capacity 05 to 10 k G. (Buy) |
|
Rubber mixing mill is used in mixing rubber products. (Sell) |
|
Offering for sale rubber mixing mills such as two roll rubber
mixing mill
Rolls: Chilled Cast Iron rolls with surface hardness 510 ~ 550 BHN. T... (Sell) |
Tender Notifications
B2B Newsletter Subscription
