Products Directory > Scientific Instruments & Supplies > Testing Equipment & Machines
Rubber Hardness Tester
Products - 43
|
Rubber Hardness Tester |
Displaying 1-43 of Total 43 Products Found |
-
Products
- Description
- Supplier Information
-
-
IRHD type royal tester made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is the minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in nc based painting and bright chrome plating to give it a corrosion resistance finish.
-
Associate Agencies,Ahmedabad,GujaratAhmedabad
-
-
IRHD type asian tester made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is the minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in NC based painting and bright chrome plating to give it a corrosion resistance finish. Technical specification more...
-
Asian Test EquipmentsGhaziabad
-
-
We have a wide range of Rubber Hardness Tester ( Durometers ) both Digital and Dial Type. These rubber hardness testers are used for checking the hardness of soft and hard rubber, plastic, abonite, bakelite these comes in two models Shore-A and Shore -D, in range 0~100 shore. more... more...
-
Associate Agencies,Ahmedabad,GujaratAhmedabad
-
-
BSE ltd. Manufactures a wide variety of durometers for polymers, composites and like materials to measure hardness of natural and synthetic rubber products, acrylics, acetates, polymers, thermoplastics, pvc, hardboards, wood, fruits and many other non standard materials.
Round type analog durometers have a dial graduated from 0 to 100 spread across 360 degrees thereby making it easily readable and accurate in measured values.
The circular durometers are provided with a maximum indicating hand for determination of creep properties of materials under test. The circular durometer shore a is supplied with a unique 3-in-1 test gauge to check the accuracy of durometers at 25,50 and 75 hardness nos. more... -
Bombay Tools Center, BombayMumbai
-
-
IRHD type royal tester made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is the minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in NC based painting and bright chrome plating to give it a corrosion resistance finish. more...
-
Associate Agencies, AhmedabadAhmedabad
-
-
IRHD type royal tester made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is the minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in nc based painting and bright chrome plating to give it a corrosion resistance finish.
-
Associate AgenciesAhmedabad
-
-
Product Name: Shore hardness tester -A
Model: EQ-HT-6510A
APPLICATION :
Shore A is designed to measure the penetration hardness of rubber, elastomers and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials.
Features :
* Digital Durometer for Shore Hardness Testing
* Pocket size with Integrated Probe
* High Accuracy Measurement.
* Digital LCD display.
* Max. Hold Key.
* Indicator of maximum value.
* Zero Calibration Check.
* RS-232C Interface.
* Automatic Power Off to conserve power.
* Low Battery Indicator
For more details kindly click with the given below attached file. more... -
Linear InstrumentsChennai
-
-
IRHD type Royal Tester made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is the minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in NC based painting and bright chrome plating to give it a corrosion resistance finish. more...
-
Associate AgenciesAhmedabad
-
-
Din abrasion tester is designed to determine abrasion resistance index of natural and synthetic rubber in accordance with the above principle. It consists of test specimen holder with a cylindrical opening adjustable between 15.5 to 16.3 mm to clamp the test specimen with an arrangement to adjust the length of test specimen protruding out. The holder is mounted by a screw mechanism along a length of a rotating drum on which the abrasive cloth is fixed. The movement to the screw mechanism and drum is given by an electric motor, gearbox and chain mechanism to give the specified speed of rotation to the drum and the specified lateral movement to the test specimen holder. The swivel arm and test specimen holder are so disposed that the test specimen is pressed against the drum under the specified load with its center axis at an inclination of 3 degree to the perpendicular in the direction of rotation and placed above the longitudinal axis of drum.
A rack and pinion arrangement to more... -
Scientific International, New DelhiDelhi
-
-
IRHD type asian hardness tester made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is the minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in NC based painting and bright chrome plating to give it a corrosion resistance finish. more...
-
Asian Test EquipmentsGhaziabad
APPLICATION:
Soft vulcanized rubber and all elastometrics, such as: natural rubber, SBR, neoprene, nitrile rubbers, flexible polyester, cast resins etc. Also used for wax, felt, leather & other materials such as cheese cones in textile industry.
* RANGE
Direct reading graduated to read from 0 to 100 Shore-A nos., though it is primarily suggested intended for use up to maximum of 75 units in the range 10 to 90 Shore-A-nos.
* STANDARDS
Conforms to the revised German Standard DIN-53 505 & American Standard ASTM D 2240 .
NEWLY DESIGNED MODEL:
SHR-A-GOLD are more accurate and long lasting because of watch mechanism components, rugged construction and one precision made components. Because of hair spring no back- lash. Also provided with two hands, a driving hand and drag hand to determine the creep property of samples.
TECHNICAL DATA:
* Indenter : Truncated cone
* Graduation : more...A ONE INDUSTRIES Ahmedabad
Our clients are offered with a comprehensive range of rubber hardness tester, We have shore A& shore D both hardness tester available.our Analoug hardness tester is widely appreciated for high performance and easy operation. Extensively used in varied industries, these rubber hardness testers are designed to perfection by adopting innovative technologies. Moreover, we also endeavor to meet the varied requirements of our clients by offering them with customized range as per the designs and specifications laid by our clients.We have digital rubber hardness tester is also availbale "TIME" and "YAMAYO " brand.We have also repairing facility in house our company.
The different types of rubber hardness tester include:
* Shore-A digital rubber hardness tester
* Shore-A analog rubber hardness tester
* Shore-D digital rubber hardness tester
* Shore-D analog rubber hardness tester
more...Samruddhi Industries, Ahmedabad Ahmedabad
International Rubber Hardness Degree Meter used to
determine the Hardness of Rubber Components where highly
accuracy and reliable determination of the Hardness is of
extreme important. The principal behind determination of
hardness by dead load apparatus is based on the
measurement of the difference between the depth of
indentation of a standard ball in to the rubber under a small
contact force and a large indenting force. This type of
hardness determination is widely accepted by I.S, B.S and
I.S.O specification. more...Fine Marketing Mumbai
We supply the IRHD hardness tester that is used to assess the hardness characteristics of elastodynamics materials employing in the rubber. Made of high quality materials, we offer this product at competitive rates to our clients. Standard features includes:
• Range of hardness 30 to 85
• IRHD diameter in indention tip 2. 50mm
• Contact force 0. 30 N
• Indenting force 5. 40 N
• Electric supply 230 volt single-phase AC
Related Standard:
• Is 3400 (part 2)-1980 methods of test for vulcanized rubber hardness more...Uninvention Testing Equipments Pvt. Ltd. Faridabad
Shore A Durometers: Designed for testing various rubber, elastomers, leather, wax and plastic products;Shore D Durometers: Designed for testing the hardness of hard rubber,such as thermoplastic plastics, bowling, plastic floor Complied with ASTM D2240, ISO/R686, DIN 53505, and JIS R7215 Specifications Shore A:
* Measuring range: 0-100 Shore A units
* Depth of indentation: 0 - 2.5 mm ( the testing material has to be thicker than 6 mm)
* Indentor: Flat Cone Point 35°
* Measuring force: 0.55 - 8.065 N
* Test pressure: 12.5 N
* Weight: 200 g (net); 300 g (gross)
* Dimensions: 115 x 60 x 25 mm
Shore D:
* Measuring range: 0 - 100 Shore D units
* Measuring force: 4.45-44.5 N
* Depth of indentation: 0 - 2.5 mm ( the testing material has to be thicker than 6 mm)
* Test pressure: 50 N
* Dimensions: 115 x 60 x 25 mm
* Weight: 200 g (net); 300 g (gross) more...Navtek Instruments (India) Private Limited Mumbai
Hardness is one of the most important properties which determine the suitability of any rubber component for its intended end use. Incorrect hardness may defeat the basic purpose for which the component is designed. Thus accurate and reliable determination of hardness is of extreme importance in rubber field.
The test specimen having flat and parallel top and bottom faces is placed on a horizontal platform located below the indenting tip. The platform can be raised up by rotating a screwed wheel. This upward movement of the platform causes the test specimen to come in contact first with the pressure foot and later with the indenting tip under the specified contact load.
Depth of penetration of the indenting tip into the test specimen is determined with the help of a dial indicator fitted at the top of the pressure foot assembly. The contact between the dial indicator and the top of the plunger rod is made through an electrical arrangement to ensure that the weight of more...Prolific Engineers Noida
* Designed to determine the indentation hardness of materials ranging from cellular products to rigid plastics. Each Durometer type is made to a specific scale (i.e. A, C, D) and is capable of producing a value between 0 and 100. Shore A is designed to measure the penetration hardness of rubber, elastomers and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials.
* It meets standards: DIN 53505, ISO 868, ISO 7619, ASTM D 2240, JIS K7215. more...Navtek Instruments (India) Private Limited Mumbai
Available with us are rubber hardness testers that are high in performance and are easy to operate. Rubber hardness testers are widely used across different industries, these rubber hardness tester are engineered to perfection adopting innovative technologies. We also endeavor to satisfy our clients spread worldwide by offering our range of rubber hardness tester as per the designs and specifications of our clients.
The Different types of rubber hardness tester include:
* Shore-A Digital Rubber hardness tester
* Shore-A Analoug Rubber hardness tester
* Shore-D Digital Rubber hardness tester
* Shore-D Analoug Rubber hardness tester
more...Samruddhi Industries, Ahmedabad Ahmedabad
We have a wide range of Rubber Hardness Tester ( Durometers ) both Digital and Dial Type. These rubber hardness testers are used for checking the hardness of soft and hard rubber, plastic, abonite, bakelite these comes in two models Shore-A and Shore -D, in range 0~100 shore. more...
Bhagwati Hardware & Mill Store Delhi
Available with us are rubber hardness tester that are high in performance and are easy to operate. Widely used across different industries, these rubber hardness tester are engineered to perfection adopting innovative technologies. We also endeavor to satisfy our clients spread worldwide by offering our range of rubber hardness tester as per the designs and specifications of our clients.Range:- 0 to 100 shore.Compact model and easy oprate.
The Different types of rubber hardness tester include
* Shore-A Digital Rubber hardness tester
* Shore-A Analoug Rubber hardness tester
* Shore-D Digital Rubber hardness tester
* Shore-D Analoug Rubber hardness tester
more...Nunes Instruments Coimbatore
Circular Type ‘BSE’ make international patented Gold medal award winner shore A circular type hardness tester for soft rubber with precision gear mechanism as per the latest German std. DIN 53505 and Latest American Std. ASTM D 2240
Reading : 1 to 100 shore A.
L.C. : 1 shore A.
Model : Shore A Gold more...Arham Scientific Co. Mumbai
We are instrumental in offering our clients a comprehensive collection of Rubber Hardness Testers (Durometers) that are widely appreciated by the clients due to their durability, reliability, easy operations and accuracy in results. Our team of quality controllers checks and tests the entire range on several parameters to ensure that only quality products are delivered at clients. Furthermore, we pack our entire range on several parameters to keep it safe and secure during transit.
Technical specifications:
Range: 0-100 shore ‘A’ for soft rubber and shore ‘D’ for hard plastic and ebonite
Makes available are BSE, Hiroshima, Kori & Westop etc.
Also available in digital type from BSE, HTC, Landtek etc. more...A. Kumar & Company, Mumbai Mumbai
This instrument is very useful to measure hardness of the pedding roll for textile processing. more...
Holy Scientific Ahmedabad
We are instrumental in offering our clients a comprehensive collection of Rubber Hardness Testers that are widely appreciated by the clients due to their durability, reliability, easy operations and accuracy in results. Our team of quality controllers checks and tests the entire range on several parameters to ensure that only quality products are delivered at clients. Furthermore, we pack our entire range on several parameters to keep it safe and secure during transit. Technical specifications:
* Range: 0-100 shore ‘A’ for soft rubber and shore ‘D’ for hard plastic and ebonite
* Makes available are BSE & STI
* Hiroshima, Kori & Westop
* Also available in digital type
more...Prestige Agencies, Mumbai Mumbai
Test Blocks For Hardness Tester more...
Askib Engineers Private Limited Kolkata
Features
Designed to measure the indentation hardness of material ranging from cellulor products to rigid plastics. Shore A is designed to measure the penetration hardness of rubber, elastomers & other products like neoprene, silicone & vinyl.
Specifications
Display : 4 Digits 10mm LCD
Range : 0-100mm
Resolution : 0.1mm
Weight : 170 Gms
Standard Accessories : Carrying Case, Manual, Test Block. more...Progressive Trading Corporation Chennai
We are one of the most prominent traders and wholesalers of a comprehensive range of Rubber Hardness Tester, which is procured from the reliable manufacturers of the industry. Our range finds application in various industrial sectors and is reckoned for its incomparable quality features. We offer these at industry leading prices to our varied clients. more...
R. K. Enterprises, New Delhi New Delhi
Our organization is offering an exclusive range of Rubber Hardness Tester, which is procured from the authentic vendors of the industry. These are manufactured in compliance with the international quality standard. Our range is reckoned for its accurate precision level, excellent calibration, high performance and easy operation. We also offer these with Test Block at market leading prices. more...
R. K. Enterprises, New Delhi New Delhi
-
-
*
*
Range: 0-100 shore ‘A’ for soft rubber and shore ‘D’ for hard plastic and ebonite
Makes available are BSE / STI /
HIROSHIMA / KORI/WESTOP;
Also available in digital type. more... -
Vijay Trade Syndicate Mumbai
-
-
0-100 Shore ‘A’ Scale for vulcanized and soft rubber, provided with test master. Accuracy: 1 Degree. more...
-
General Instruments Corporation Mumbai
-
-
Indentation Hardness Tester
-
The Bharat Group Faridabad
-
-
Rubber hardness tester.
-
S.C.Dey And Company Kolkata
-
-
the principal behind determination of hardness by dead load apparatus is based on the measurement of the difference
between the depth of indentation of a standard ball into the rubber under a small contact force and a large indenting force.
the machine is as per is-3400 (part-ii) 1980 more... -
Fine Marketing Mumbai
-
-
Rubber-Hardness-Tester more...
-
Sai Traders Ahmedabad
-
-
The Rubber Hardness Tester is used to check the hardness of soft materials such as Rubber, Plastic, Bakelite, etc. The Rubber Hardness Tester, offered by us, is appreciated for its excellent accuracy and reliability. We are the well-known Rubber Hardness Tester Exporter, Importer, and Supplier in India. This Rubber Hardness Tester is provided by us at affordable prices.
Models Available
* Analogue & digital
more... -
Techno Instruments Company Bengaluru
-
-
Abrasion tester rubber more...
-
Innotech New Delhi
We are engaged in manufacturing and supplying a wide range of Rubber Hardness Tester which is known for features like easy to operate and high in performance. These rubber hardness testers are further engineered to perfection using advanced technologies. Apart from this, we also provide our products in the various designs as per the customized specifications. more...
Harinder Industries P. Ltd. Gurgaon
-
-
IRHD Rubber Heardness Tester more...
-
Soft Gem Exports Private Limited Mumbai
-
-
The instrument is used for periodic calibration of Shore ‘A’ and Shore ‘D’ Rubber Hardness Testers (Durometers). more...
-
Kudale Instruments Private Limited Pune
-
-
Available with us are rubber hardness tester that are high in performance and are easy to operate. Widely used across different industries, these rubber hardness tester are engineered to perfection adopting innovative technologies. We also endeavor to satisfy our clients spread worldwide by offering our range of rubber hardness tester as per the designs and specifications of our clients.
more... -
Samruddhi Industries Ahmedabad
-
-
HARDNESS TESTER RUBBER more...
-
Innotech New Delhi
-
-
The instrument is used for periodic calibration of shore a and shore d rubber hardness testers (durometers).
-
Kudale Instruments Private Limited. Pune
-
-
Rubber Hardness Tester
-
The Bharat Group Faridabad
Related Trade Leads
|
|
We offer high quality rubber hardness tester. The tester is finished in
nc based painting and bright chrome plating to give it a corrosion
resistan... (Sell) |
|
|
Offering Rubber Hardness Tester.Application:Soft vulcanized
rubber and all elastometrics, such as: natural rubber, sbr, neoprene,
nitrile rubbers, ... (Sell) |
|
|
Offering Rubber Hardness Tester Shore A.We are manufactures a wide
variety of durometers for polymers, composites and like materials to
measure har... (Sell) |
|
We have requirement of rubber hardness tester (shore a & d), specific
gravity balance & thickness gauge.
Kindly send price quote regardin... (Buy) |
|
We require rubber hardness tester for durometer dial type with following
specification:
* Test range : 0 - 100HA
* Available test range : 10 - ... (Buy) |
Free Tenders from India
Tell suppliers exactly what you need
B2B Newsletter Subscription