Products Directory  > Telecom Products > Communication Equipments

RS232 Converter

Companies - 42

Products - 100

• Port Powered Convertor

  
  We provide Quality Range Of :
  
  
  
  * RS -485 series converter is bi-directional connector converter Between RS-232 and RS-485
  * Port powered
  * Auto direction control
  Features :
  
  * Rs -485 series converter is bi-directional connector converter between rs-232 and rs-485
  * It is mainly used for communication between main controller machines and pc .
  * Rs -485 series converters change the txd and rxd signals of rs-232 serial port to 2 wire half duplex rs-485 signal.
  * No need to get through the power, it can get the electricity from the 3rd pin of rs-232 interface
  * Auto direction control
  * Port powered
  * Buad rate upto 115 kbps
  more...

• Sivara Enterprises  Bengaluru View Catalog

• 
• Serial to USB Converters

  Compatible with USB1.1, highest speed can reach 12 Mbps
  Compatible with USB2.0
  Supports remote wake up and power supply management
  Supports hot plug and PnP
  Need no I/O location and IRQ setting, friendly UI
  Supports RS-232 handshake protocol, support full duplex data operating mode
  RS-232 serial port transmission speed maximum 921.6KBPS more...

• Aykay Electronics  New Delhi View Catalog

• 
• RS232 To GPRS Gateway

  I2R-232-GP-GW-V1.0
  
  Convert any wired serial network to wireless network though our transparent RS232 to GPRS gateway. As GPRS service has become low cost traditional RF
  Networks can also be replaced to a GPRS network. You can transfer data to any distance where there is an availability of a GSM GPRS Network. Remote
  devices can be centrally managed without pgrading the device firmware and central software. Unlike those systems that the devices are centrally
  managed via PSTN or GSM dial up line or lease line, I2R-GW-GP-232-V1.0 can be a more cost economical solution to achieve a "always on" data link network. It is a full transparent, protocol independent gateway, for AMR, SCADA, general remote monitoring, control and data exchange applications. more...

• I2R Labs  Bengaluru View Catalog

• 
• Signal Isolaters

  Avail from us a wide range Signal Isolaters which are designed such to accept wide range of current and voltage input signals. Our product can isolates the signal and convert it to standard instrumentation signals, which can be accepted to various automation products. They effectively transmit analog signals between the fields and the receiving instrument. In turn, it permits ground levels to rise up to thousands of volts and prevents circulating current between low potentials that can corrupt even input signal. They also have the tendency to isolate the corrupted signal to a clean signal for accurate measurement and controlled applications.   We accept client's specifications ads per their request. more...

• Charun Instruments  Ahmedabad View Video View Catalog

• ATC-850 USB to RS232-RS485-RS422 ISOLATED CONVERTER

  MICON offers as a new-type computer communication interface, USB interface has been widely applied by the industry. USB(universal serial bus) is a kind of connecting standard which allows connections between peripherals and computer without reconfiguring system or opening computer case to install adapter card since the computer can identify these devices and install corresponding drivers automatically without user intervention. USB has realized plug and play and hot plug, enabling users to connect peripherals with their computers conveniently and rapidly. USB has provided all USB peripherals with a kind of “universal” connectors (type A and type B) for connecting PC which will replace all tradition external ports including serial ports, game interfaces and paralleled ports. With USB, up to 127 peripherals can be connected to an external USB port serially while the present serial port or paralleled port can only connect one peripheral each.
  
  ATC series more...

• Micon Automation Systems Private Limited  Ahmedabad View Catalog

• USB to RS232 Convertor

  Relying on our workforce, we bring forth an expansive range of USB to RS232 Convertors(EL-U232). These have a broad range of compatibility and can be connected with USB2.0 & RS232 standards of EIA.TIA. This product has a working mode, which runs in asynchronous full duplex. Furthermore, these convertors offer a transmission speed between 300bps to 57600bps. more...

• Connector Point  Mumbai View Catalog

• ATC 106 / ATC 106N RS 232 to RS 485 Interface Converter

  
  * Transmission Media : Twisted pair cable or shielded cable
  * Connector : RS‐232 – DB9 Female; RS‐485 – DB9 Male &
  * Terminal Block Connector
  * Operation Mode : Asynchronous half duplex
  * Transmission Speed : 9600BPS to 6000 feet
  * Supply : Port Powered (It Takes
  * power ±5.5 V from TD or
  * Handshake Lines.)
  * Working Environment : 0°C~50°C‚ 5%~95%RH
  * RS‐485 Connection : 485+, 485 –, GND (ATC‐106N)
  more...

• Micon Automation Systems Private Limited  Ahmedabad View Catalog

• RS232 to RS422/RS485 Converter

  A special range of RS232 to RS422/RS485 Converters can be availed from us at market leading prices. These have a very high transmission speed, which can vary between 300 bps to 115.2Kbps. Furthermore, these are provided with a signal indication LED for TXD, RXD and Power. The best feature of this product is that no power is required within the range of EL-242/EL-243. Some other specifications and features of this item are enlisted below:
  * Compatible with RS-232, RS-422/RS-485 standards of EIA./TIA
  * Working mode: RS-422 asynchronous full duplex. RS-485 asynchronous half duplex
  * Transmission distance: 0-1200 meters
  * Protection rate: 1500V optical isolation(EL-246) or surge protection(EL-247)
  * No power required(EL-242/EL-243)
  more...

• Connector Point  Mumbai View Catalog

• Converter

  We are involved in offering a wide range of RS232 RS485 Converter to our clients. These converters are well-known for their compact designs, reliability and low maintenance. Our clients can avail these converters at market leading prices as per their budgetary requirements. The other features and specifications of these are tabulated below:   more...

• M/S. Kabir Connectronics  Mumbai View Catalog

• MWE814 - USB to 4 Slaves RS232 converter

  The MWE814 could converter 1 master USB to 4 slaves RS232. USB port powered.   Ÿ           Support USB2.0 standard, hot-Swappable Ÿ           Support WIN98/2000/XP software; support Apple OS8/OS9 Ÿ           Long-distance awoken and power manage. Ÿ           Particular protect circuit of the port, static and lightning strike resisting. Ÿ           15Kv static protecting and 600W/ms lightning protecting Ÿ           Industry level design, excellent import element chosen, all surface adhibit techniques.   SPECIFICATIONS more...

• Digiprotech Markcom India Private Limited  Bengaluru View Catalog

• Industrial USB To RS232/485 Converter

  We bring forth our clients a range of Industrial USB To RS232/485 Converter, ideal for small premises with few readers and unavailability of network. In the application of this product, each reader connects to one COM port of computer. These products provide a slow mode of communication whereas the distance between the reader and computer is also limited.
  Features:
  
  * Compact designs
  * Easy to installation
  * Low maintenance
  more...

• Axi Tech Nano Systems Private Limited  Ahmedabad View Catalog

• USB to Serial Converter

  We supply a wide range of USB-to-RSxxx converters with galvanic isolation that are made in state of the art facilities under strict vigilance to ensure that it conforms to highest quality parameters. They help in providing connectivity to the USB port. These converters provide RS232, RS422 and RS485 connectivity (with galvanic isolation) to computers through USB port. We have been able to carve a huge customer base all across the globe owing to specific features that satisfy various customers needs and other applications.   Converter Specifications:  
  * Three different interfaces supported: RS232, RS422, RS485.
  * RS232 interface includes 3 signals (RxD, TxD, RTS) and GND connection.
  * RS422 interface includes 4 signals (Tx+, Tx-, Rx+, Rx-) and GND connection.
  * RS485 interface includes either 4 (Tx+, Tx-, Rx+, Rx-) or 2 (TxRx+, TxRx-) signals and GND connection.
  * Galvanic isolation more...

• Spj Embedded Technologies Pvt. Ltd  Pune View Catalog

• ATEN IC485SN RS-232/RS-485 Interface Converter

  IC485SN is a 2-way converter for converting RS-232 signals to and from RS-422/RS-485 signals in long-distance application up to 1200m (4000 ft.) and needs no external power supply.
  Package Contents
  * 1x Bi-directional Converter
  * 1x User Manual
  more...

• Rahi Systems Pvt Ltd  Pune View Catalog

• RS485 To RS232 Converters

  Applications :
  
  
  * Conversion of RS-485 signals to RS-232 signals
  * SCADA systems
  * PLC systems
  * Process measurement and communications
  * Telemetry systems
  
  Features :
  
  
  * Panel Mounted - Bezel size : 48 mm x 24 mm
  * Uses MODBUS protocol.
  * Port powered two channel (half duplex) RS-485 to RS-232 converter.
  * No external power required if two RS-232 handshake lines are available.
  * The unit can be powered from +12V DC supply externally if handshake lines are not available.
  * Can transmit up to 4000 feet at 115.2k baud.
  more...

• Instrument Sales Corporation  Nagpur View Catalog

• MWE820B -USB to RS232/RS485/422 isolation converter

  The MWE820B could converter USB to RS-232/RS-485/RS-422???USB port powered.   Ÿ           Support USB2.0 standard, hot-Swappable Ÿ           Support WIN98/2000/XP software; support Apple OS8/OS9 Ÿ           Long-distance awoken and power manage. Ÿ           Particular protect circuit of the port, static and lightning strike resisting. Ÿ           15Kv static protecting and 600W/ms lightning protecting Ÿ           Industry level design, excellent import element chosen, all surface adhibit techniques.   SPECIFICATIONS : more...

• Digiprotech Markcom India Private Limited  Bengaluru View Catalog

• Industrial RS232 To 422/485 Converter

  We stand amidst the illustrious organizations engaged in offering Industrial RS232 To 422/485 Converter. Our adapters are smallest in the industry and have proved to be of a great help. These products have patented unique firmware that allows RS 232 signal response. This range of converters is offered to the clients at a very nominal price.
  Features:
  
  * Easy to installation
  * Low maintenance
  * Reliable functionality & dependability
  more...

• Axi Tech Nano Systems Private Limited  Ahmedabad View Catalog

• Serial To Parallel Converter

  We are engaged in offering a comprehensive assortment of Serial to Parallel Converter to our clients. These converters are bidirectional and are effective in converting serial (RS232) to parallel (centronics) or parallel (centronics) to serial (RS232) interface with selectable Baud rate (300-19.2 K) and direction. Our converters are capable of supporting XON/XOFF and handshake (RTS, CTS) protocol. There is a front panel switch in these converters, which clears memory and initializes printer. We provide the option for RS485 interface with these converters. The detailed features and other technical specifications of these are tabulated below:   more...

• M/S. Kabir Connectronics  Mumbai View Catalog

• ATEN IC485AI RS-232 To RS-482/RS-485 Bidirectional Converter

  IC485AI is a 2-way converter converting RS-232 signals into RS-422/RS-485 signals in long-distance application up to 1200m (4000 ft.). Its built-in RS-485 automatic flow and direction monitoring function can suppress signal surge.
   Package Contents
  * 1x Industry Control
  * 1x Power Adapter
  * 1x User Manual
  more...

• Rahi Systems Pvt Ltd  Pune View Catalog

• RS-232 to RS-485 Interface Converter

  
  * DB9-S/P space saving connector.
  * RS-232C data interface fully compatible with PC.
  * DB9 connector and 4-bit terminal are optional to RS-485 interface.
  * Automatic direction control of transmitting data (TXD), zero-latency design.
  * Working mode: asynchronous half or full duplex.
  * High efficiency serial port electricity stealing technology, need no external power supply, real three line (TD, RD, GND) mode communication.
  * Communication speed: 0-115.2KBPS.
  * Transmission distance: 0-1200 meter@24AWG.
  more...

• E-Novas Control & Automation, LLP  Chennai View Catalog

• Converter (RS485 to RS232)

  Converter (RS485 to RS232)
  
  
  
  
  
  

• Akshay Microprocessors  Pune View Catalog

• RS232 to RF Converter - 433 MHz

  Overview:
  
  The RDSRF-232-A4FZ is a single board high performance and low power serial to wireless solution that can be used to add wireless to any system with serial output. It is a complete plug and play system where the user can connect two boards and start a wireless communication between them instantaneously. RFSRF-232-4FZ can be easily integrated to existing systems without tedious software and hardware changes. These boards are intended to be used with systems which already have a serial interface. This device has a link budget of 120 dB making it suitable for applications that require a robust communication over a range of 500 meters line of sight.
  
  Features:
  
  
  * Covers over a range of 500 meters line of sight depending upon the baud rate
  * Standard Frequency: 433 MHz
  * Serial to RF converter with built-in level converter and antenna
  * User configurable serial and RF baud rate, packet size and RF power output
  * Operates on more...

• Reindeer Systems Private Limited  Chennai View Catalog

• Accesories Converters Cnv100

  The CNV 100 module is a RS485 to RS232 converter used for connecting XPR's Network Fingerprint Readers (BioXr, BioC and BioIN Prox) to PC. One converter is needed for one installation, NOT one per Fingerprint Reader.
  The CNV 100 is a 2 channel non - Power SD control RS485 to RS232 interface converter. CNV 100 can convert the TD and RD signals of RS232 into balanced half duplex RS485 signals. more...

• Xpr Group  Bengaluru View Catalog

• Converter

  This is DIN rail mounting type RS232 to RS-485/422 converter.
  * Power Supply: 110/230VAC, 50 Hz or +5VDC
  * RS-232 interface: 3-wire
  * RS-485 interface: 2-wire or 4-wire
  * Galvanic Isolation of 1KV between RS-232 and RS-485/422 signals
  * Supports high speed communication
  * Supports 32 nodes on RS-485 side
  * Enclosure: DIN rail mounting, Plastic
  * Dimension: Outer: 70 mm (W) x 60 mm (H) x 111 mm (D)
  It is recommended to use twisted shielded pair of cable for connecting on RS485 side. This device is very useful for inter connecting field instruments, PLC, PC, HMI etc. more...

• Samyak Instrumentation Private Limited  Ahmedabad View Catalog

• Serial Converter And Repeaters

  Serial Converter And Repeaters more...
  
  
  
  
  
  

• Scan Electronic Systems  Pune View Catalog

• RS232 to RS422/485 Convertor

  Integrity Instruments, USA interface convertor comes with life time warranty which shows the faith of the manufacturer in its product
  
  
  
  
  
  

• Hindusthan Engineering Company  Kolkata View Catalog

• Em731 - Rs232 To Rs485 Converter

  Simple Low cost RS232-Rs485 converter
  Supports auto baud rates
  Low power consumption
  Small in size
  Easy to install and use more...
  
  
  
  
  
  

• Emwhiz Technologies Private Limited  Bengaluru View Catalog

• RS232 To RS485 Converter

  Ztech’s digit RS232 to RS485 converter is designed to offer a truly simple, cost effective digital pressure gauge to cover a wide range of applications from calibration laboratory to in-field use. It indicates pressure with different selectable units by user with the resolution of maximum 6 digits in battery operated version. It has auto power OFF function in battery operated model. It has other model in which it can be used as loop power indicator with 4- 20mAdc transmitter by giving 15 to 24Vdc external supply voltage. In this version it will give you resolution of four digits with selectable multiplying factor for different unit scales with red LED display.
  
  It is operated by high precision piezoresistive silicon sensor technology. It is available in two different applications for air, gases (dry) media other model is for air & liquid with SS316 diaphragm.
  
  Features:
  
  
  * Accuracy: 0.05% FS 0.1%FS 0.2%FS Display
  * Display: Monochrome more...

• Ztech Instruments  Ahmedabad View Catalog

• Rs 485 / Rs 232 Converter

  
  * Input : rs 485 ( 25 pin d type connector)
  * Output : rs 232 ( 25 pin d type connector)
  * Type : 2 wire & 4 wire
  * Max distance : 1. 2 km @ 19,200 bps
  * Cable : shielded twisted pair cable 90ohms / 1000 meter
  * Orotection : 2500 v peak
  * Indication : tx, rx, pwr led
  * Power supply mains input-230v, 50 hz
  more...

• Pioneer Instruments Private Limited  Udaipur View Catalog

• Parallel Converter (Smart Con)

  
  * Converts RS232 to RS 485 and vice versa. (i.e RS232 <-> Centronix)
  * Uses DIP switch for baud rate/data format selection.
  * Provides for memory buffer.
  * Uses a Microcontroller.
  more...

• Data Care Systems Private Limited  Bengaluru View Catalog

• Communication Converter (Cc-03)

  The EA48 is designed to convert Wiegand communication signals to RS232 communication signals. more...
  
  
  
  
  
  

• Elid Security Electronics Private Limited  Bengaluru View Catalog

• RS232 To RS485 Converter

  The device acts as a converter for RS232 to RS485 or RS485 to RS232, by shifting signal levels. It is an interface device between digital energy meter and PC/ Modem. RS232 to RS485 Converter establishes a transparent link for data transfer between multiple meters and Base Computer Software.
  
  Applications:
  
  * Local and remote meter reading
  * Most suitable for online monitoring systems
  * Suitable for sites with multiple meter installation
  
  Features:
  
  * Connection with energy meter’s optical/ RS232/ RS485 communication ports
  * In built power supply
  * Status LED provision
  * In built power supply
  * DIP-switch selector for different baud rates.
  more...

• Secure Meters Limited, Udaipur  Udaipur View Catalog

• Output

  rs 232c output more...
  
  
  
  
  
  

• Task Precision Industries  Pune View Catalog

• Converter

  Converter more...
  
  
  
  
  
  

• Numag Data Systems Pvt Ltd  Bengaluru View Catalog

• Atc-810 Usb To Rs-232 Converter

  This device provides a simple and easy way to connect Universal Serial Bus (USB) and Serial port interface. With the advantage of USB port, users have the capability to utilize the peripheral with serail port interface in an easy to use environment such as plug and play & hot swap function. This adapter is designed for ideal connections to Cellular Phone, Digital Camera, Modems or ISDN terminal adapter with over 1Mbps data transfer rate. more...

• Micon Automation Systems Private Limited  Ahmedabad View Catalog

• RS232 To RS 485 Converter

  Authorized Siemens Logo
  
  This product is a complete Control PLC HMI. Easy to use, efficient and affordable, our products have been automating process, systems and stand alone applications. Unitronics field proven PLCs automate tens of thousands of installation in diverse fields ; Petrochemical, automotive, food processing, plastic & textile, energy & environment, water & waste water management in fact anywhere automated process are required. Our clients include: Coca-Cola, General Motors, Colgate - Palmolive, ABB, Tata, Kirloskar. more...

• Annapurna Automation & Controls.  Pune View Catalog

• Comcon : RS232C to RS485 External Converter

  When multiple Card Readers have to be installed in cluster, RS 485 Bus topology is used. It uses 2 wire half duplex communication bus and the cable can be extended upto 1.2 km (of course using suitable screened, twisted pair 0.75 sq.mm. cable) from the computer Comport. Since, the PC does not support RS 485 port, a communication converter is required to convert the same to RS 232C. This converter is termed as COMCON. It operated on 230V AC & is provided with a 2m Cable to connect it to PC Comport. There is a screw terminal provides for RS 485 cable connection.

• Fortuna Impex Pte Limited  Kolkata View Catalog

• Converter

  This DIN rail mounted unit is with 3-way isolation & primary finds use in many industrial & commercial applications where it is used for communication interface RS-232 to RS-485/RS-422 conversion with isolation. It has a universal design with 5 modes, which can be selected with DIPswitches provided on the unit. Prefab cables are also available for quick wiring.
  Supply voltage is available as per the requirement & units are available in plastic enclosures. more...

• M/S Ken Integrated Technologies  Pune View Catalog

• USB To RS232 Converter

  USB to RS232 Converter
   USB 2.0; Compliable USB1.1,1.O .DB9 male connector for RS-232 .Automatic hand-shaking protocol supported.  Remote wake-up and power supply management supported.USB powered. LEDs for indicating USB and TxD/RxD activity +/-15KV ESD protection for all serial ports  Communication from single-chip (ASIC) USB to serial port interface.Working environment: -25 to , relative humidity 5% to 95%.  Windows95/98/2000/XP and NT-IMAG supported.
  UT-880 is a universal USB/RS-232 interface converter. No external power supply needed. Compatible with USB and RS-232 standards, UT-880 is capable to perform the conversion from single-ended USB signal into UART signal of RS-232. DB9 male connectors are used for connection from RS-232 interface. The unique I/O circuit of the internal zero delay auto transceiver contained in the converter controls the data stream direction automatically. The converter is plug-and-play. All these features ensure a universal more...

• Acenza Technologies & Automation LLP, Chennai  Chennai View Catalog

• Em711 - Rs232/ Rs485 To Ethernet Converter

  EM7111 is a RS232/RS485 to Ethernet Converter which can be used to connect RS232/RS485 serial devices to an Ethernet LAN/WAN or to any other device with Ethernet ports. This converter can provide reliable communication on Ethernet. This is a low cost converter and hence can be used to IP enable serial devices quite economically EM711 has one DB9 female connector for RS232 connection and a pluggable connector for RS485 on the serial side. On the Ethernet side the converter is provided with a 10/100 Mbps Ethernet RJ-45 connector. Ethernet port will auto-select 10BaseT or 100BaseTX. On the Ethernet side EM711 will support TCP, UDP or Telnet and can be configured as a client or server. Specifications
  Serial port StandardRS232 or RS485 RS-485 signalD+, D-Baud rate150-230400bpsData bits Parity7bit, 8bitData TransmissionAutoDirection Enables Driver
  Automatically on TransmissionEthernet port StandardAccord 10Base-T/100 Base-T standardProtocolSupport TCP, more...

• Emwhiz Technologies Private Limited  Bengaluru View Catalog

• Protocol Converter

  Protocol Converter more...
  
  
  
  
  
  

• Scan Electronic Systems  Pune View Catalog

• USB to RS 232

  
  * Serial Port
  
  * RS-232
  
  *   No. of Ports : RS-232 * 1 Port Port Type : DB-9 male connector RS-232 Signals : DCD , RX , TX , GND , RTS , CTS , DTR , DSR Receive buffer : 576 Byte Transmit buffer : 640 Byte Baud Rate Speed : 300 bps〜921.6k bps Parity :None , Odd , Even , Space , Mark Data Bit : 5 , 6 , 7 , 8 Stop Bit: Auto-Detection : 1 , 1.5 , 2, Flow Control : X-On / X-Off or Hardware Connected Serial port type identification : Auto-Detection 15KV ESD for all signal
   
  * USB Port
  No. of Ports : USB * 1 Port
  *  
  * Chipset : Silicon Laboratories CP2102
  * Fully compatible with the USB V1.0, V1.2, V2.0
  * USB type A connector
  * Baud Rates : Full speed 12 Mbps.
  more...

• E-Novas Control & Automation, LLP  Chennai View Catalog

• Communication Converter (Cc-04)

  the ea52 is designed to convert multi-drop signals to rs232/rs422 communication signals, or convert rs422 signals to rs232 communication signals. more...
  
  
  
  
  
  

• Elid Security Electronics Private Limited  Bengaluru View Catalog

• RS232 to RF Converters

  t is a complete plug and play system where the user can connect two boards and start a wireless communication between them instantaneously. They can be integrated to existing systems without tedious software or hardware changes. The software configuration utility provides options for configuring the following parameters of the device. Serial Baud Rate.Parity. Stop Bits.RF Baud Rate.RF Channel.RF Output Power.Options To Set Device Address.Configuration Of The Device As Transmitter, Receiver Or As Repeater.User Driven Termination Character For The Transmission.PC COM Port Selection For Communication. Applications Industrial Automation Crane Control Systems Textile Instrumentation Panels Instrumentation Devices Interface Digital Weighing Systems Wireless Sensor Networking Remote Data Logging Automated Meter Reading

• Reindeer Technologies Private Limited  Chennai View Catalog

• RS232 to RS485 Converter

  The device acts as a converter for rs232 to rs485 or rs485 to rs232, by shifting signal levels. It is an interface device between digital energy meter and pc/ modem. Rs232 to rs485 converter establishes a transparent link for data transfer between multiple meters and base computer software.

• Secure Meters Ltd.  Udaipur View Catalog