Products Directory > Electronics & Electrical > Passive Devices >
Resistors
Displaying 1-33 Products of Total 68 Products Found
-
Products
- Description
- Supplier Information
We also supply and distribute various chips which are offered in: more...
- Siricom Technology
The thin film resistors/cfr/mfr that we offer are used for automotive, telecoms, industrial, aerospace, medical, and precision test and measuring instrument. Even under harsh environmental conditions our resistors operates extremely reliable and stable. These provide high load-life stability and superior moisture resistivity.
Our thin film resistors are available in:
more...- Isha Agencies
FC Resistors more...
- Kura Electronics and Electricals
We manufacture a range of battery discharge resistors. These resistors are made from robust assembly consisting of copper- nickel alloy wire grid elements supported on M.S. tie rods insulated from each other and the enclosure with micanite tubes, washers. The unique design of elements allows rapid, natural cooling of resistor bank.
- National Resistors
Our high qulaity chip resistors have the following features: more...
- Siricom Technology
We offer ISO 9001 certified wire wound resistors of radial and axial type, silicon coated and ceramic type. Our wire wound resistors are available in:
I. Power Ceramic Encased (SQP):
more...- Isha Agencies
We produce a range of starting/speed control/buffer resistors for motors. These resistors are used to start and control the speed of A.C or D.C. Motors. We have used good quality raw material of resistor that is normally stainless steel AISI-304, AISI -410 or AISI 430 or FeCrAl-AISI-406. These are mainly used for cranes. The rating can be 2 minute, 5 minute, 10 minute, continuous or intermittent. Besides our regular range, we also manufacture as per customer’s requirement at specified starting torque or for limiting initial inrush current to an acceptable value.
Standards Followed more...- National Resistors
We offer thick film resistors, which have features like compact, easy-to-mount and a broad range of resistance values. Our thick film resistors are non-inductive and provide a wide resistance range. These resistors save valuable space on the circuit board, allowing designers to reduce the size of their end products.
Our thick film resistors are available in:
I. Dynamic Braking:
more...- Isha Agencies
We manufacture a range of neutral grounding/earthing resistor up to 33 KV. These resistors are employed in AC distribution networks to limit the restricted earth current to a safe value which would flow from the transformer or generator star point in the event of an earth fault in the system without exceeding specified temperature limits. Optional Features more...
- National Resistors
We supply a wide range of finest quality semi-fixed variable resistor (preset) and offer them to our clients. These components are imported and stocked by us from Indian and foreign manufacturers who make them adhering with the strict quality standards.
Application: Electronic Appliances more...- Super Sales India, Delhi
We are also offering top quality Dynamic braking resistors (DBR) that are used to absorb the energy generated while stopping electric motors. They function to absorb this energy & cool down quickly between stops .We have developed a wide range of DB resistors for locomotives & metro vehicles, that are manufactured in standard or customized packages as per request. Units can be supplied either as open banks or mounting into existing enclosures. High quality iron-chrome-aluminum ( Fe Cr Al ) alloy or Stainless steel ribbon bank resistors feature a 3-inch wide stainless steel resistive alloy element that is serpentine, formed from one continuous strip. These are designed with superior mechanical strength to eliminate possible internal shocks. The element and terminals are rigidly supported by two mica-insulated through-bolts. Elements are double insulated to ground & end frames are provided with slotted mounting holes for easy installation. Available with multiple taps. more...
- King Industrie
Features:
more...- Kiyosh Electronics
Twin range of RF loads or terminating load resistors are designed to give an economic solution to ever growing need for a compact, rugged and simple termination suitable for bench or field use.
The coaxial loads either utilize a low noise chip resistor or Rod resistors depending upon the required power rating. Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with N type connectors however other connectors may be offered to meet particular customer requirements.
Twin loads are available for use over the frequency from 1 GHz to 4 GHz and at a power ratings 50W to 500W .other power rating may be available on request.
Applications
Transmitter/Combiner output termination
Co axial line terminations
Circular Port terminations
Types and Specifications of Dummy Loads
50 Watt, Convection-Cooled Dry - N, BNC, TNC, SMA, 7/16 DIN
Specifications
Ambient Temperature -10º C to 50º C
Connector N, BNC, TNC, SMA, 7/16 more...- Twin Antennas
The integrated circuit is nothing more than a very advanced electric circuit. An electric circuit is made from different electrical components such as transistors, resistors, capacitors and diodes, that are connected to each other in different ways. These components have different behaviors.
- Hothan Co. Limited
Metal Oxide Film Resistors is a group of power type high quality resistor with special metal oxide film which is thermo chemically burned on the high heat conductive base material. These are most reliable products which can be used easily for various kinds of electronic devices and instruments. These products have got flame resistant coating type as well as non flame resistant coating types which further improve their quality.
Features :
• Stable performance
• 0.125 W to 0.50 W
• Range 10 to 1 M
• High safety standards
• Tolerance 1% & 5%
• Excellent flame retardant coating
• High purity ceramic core
• Low noise with high resistance value
• Best resistivity to heat and humidity- Kaytron Components Private Limited
We are a trusted name in the field of manufacturing standard resistors in manganin wire, which is used as standards for testing and calibration. Our range of resistors are available in both standard & customized basis at cost effective prices.
- Paramount Electrical & Mechanical Industries
We stock and distribute prominent brands of electronic components at the most competitive prices. We offer range of electronic components like: more...
- Risabh Electronic Systems
Specification: Double
The slide wire rheostat double is an extension of the above stated rheostat however with small differences. It is constructed with Black oxidized Eureka wire (copper Nickel Alloy wire) which is wound on enamelled steel pipe with a diameter of 50mm and length varying from 300mm, 375mm to 450mm. M.S.End supports are used for mounting the pipes. The rider is constructed of tempered phosphor bronze sheet, which serves the purpose of voltage and amps control in electrical circuit . To meet higher loads, porcelain pipes are used. There is a provision for customization of the product according to the requirement of the user. more...- Resistors India Mfg. Co.
REC-J Series more...
- Reckon Electronics
We manufacture and export high class ME Load Bank, which is a single phase and three phase variable Lamp or resistor or capacitor load and is housed in a metal case. It is used for stimulating load conditions to test Voltmeters, Ammeters and Watt meters, using load switches provided on the bench. The total simulated load is the sum of loads of all 'ON' switches.
Construction Features:
The ME Load Banks are provided with:
more...- Mahesh Electrical Instruments
We are the authorized dealers of various manufacturers including Gujarat Poly-Avx Electronics Limited (GPAEL). We procure metal oxide variastor from it. Being a voltage dependent resistor, it has fast response time and excellent voltage ratio.
Its symmetrical voltage-current characteristics helps in protection of almost all types of electronic devices or elements from switching and induced lighting surges. It is widely used in the electric engineering applications due to its non linear exponent characteristics that are ideal for a huge variety of applications and assemblies. It offers excellent surge current handling capability and performs efficiently in clamping voltage characteristics. Its great voltage and energy ratio provides low leakage of current.
It is used in the following applications more...- Altek Systems
We offer some of the superior Ceramic Encased Wire Wound to clients, which comes in the range of 2W to 10W and have got high tolerance value of 2% and 5%. These products are available to clients at the most competitive prices.
Features :
• Range 0.1 to 1K
• Self extinguishing
• Extremely small and sturdy mechanically safe
• Non inductive available
• Radial and axial type- Kaytron Components Private Limited
Having a resistance range of 1-1M, power capacity of 50W-500W and the special feature being can be used for high voltage application having a tolerance range of +/- 5%. more...
- Kiyosh Electronics
An NGR is primarily a safety device that reduces shock hazards to personnel & equipment. They provide protection against high voltage. These are also used to protect power transformers, power generators & other allied equipment in power systems against 50/60 H faults (short circuit) and transient phenomena (lightning). These resistors offer protection against high voltage & are virtually maintenance-free. Its technical specifications are as follows: Materials used: Our Neutral grounding resistors are made from tough steel grids of a high quality iron-chrome-aluminum ( Fe Cr Al ) alloy or AISI 304 SS. They are non-corroding & offer good electrical stability thus eliminating maintenance problem & are suitable for installation in outdoor atmosphere. Insulation: Our neutral grounding resistors use mica and ceramic insulators. Ventilation: Neutral grounding resistors are contained in fully protected and ventilated more...
- King Industrie
The resistors are a two terminal electrical and electronic component which resists an electric current by producing a voltage drop. We offer a wide range of resistors (CFR/MFR/Wire Wound) to our clients which are specially imported from the most famous manufacturers in the market. These products follow all the international standards like ERTL, NPL and ISO, which make them highly performance oriented and useful for our clientèle.
Application: In the circuits of many electrical and electronic devices like T.V, Radio etc. more...- Super Sales India, Delhi
We are also engaged in the manufacturing of shunts for welding machines application - TIG, MIG & CO2, which provides solution to electrical & mechanical industries in their diversified applications. Our range of shunts are used for voltage sensing & current controlling in welding machines. Available in the capacities of 50 amphere to 5000 Amp. and also as per clients requirement to provide them complete satisfaction.
- Paramount Electrical & Mechanical Industries
REC-I Series more...
- Reckon Electronics
Specific Name: Fechral Wire Coil Type Element
Fechral wire is wound keeping different inside diameter for the coil.Different lengths can be cut to suit the resistance values according to the design. Coil ends are fitted tightly with M.S. clamps and are welded. These elements are stacked inside the resistor box. more...- Resistors India Mfg. Co.
Features:
more...- Kiyosh Electronics
Our company offer a wide range of standard shunts in manganin wire, which are used for current measurement or for voltage sensing.
These shunts provide solutions and are very useful in power supplies, inverters, & battery chargers. Available in various ranges, starting from 1 amphere to 15000 Amp. and also available as per the specifications mentioned by our clients to meet their exact need.- Paramount Electrical & Mechanical Industries
RE-B Series more...
- Reckon Electronics
Specification: Single
In the slide wire rheostat, Black oxidized Eureka wire also called (copper Nickel Alloy wire) is wound tightly on enamelled steel pipe that has the diameter 50mm and lengths 300mm,375mm and 450mm. Bakelite end supports are employed for mounting the pipes. The rider is constructed with tempered phosphor bronze sheet which serves the function of voltage control and amps in electrical circuit. more...- Resistors India Mfg. Co.
We are into the manufacturing of superior quality Coated Wire Wound Resistors which are used to wind the resistance wire on alkali-less ceramic core coated with non-corrosive and high insulating heat proof material.
Features :
• Super heat dissipation
• 0.50 W to 5.0 W
• Range 0.1 to 470
• Tolerance 2% & 5%
• Grey body color
• Excellent flame resistance
• Small linear temperature coefficient
• Instant overload capability
• Low noise figure without annual shift on resistance value- Kaytron Components Private Limited
