Products Directory  > Plant & Machinery > Process Control Equipment

Programmable Automation Controllers

Companies - 229

Products - 39

• Invensys Eurotherm HMI PenGUIn

  Graphic Colour LCD Operator Interface Terminal with TFT display and Touchscreen
  
  more...
  
  
  
  
  
  

• Shree Venkateshwara Controls  Pune View Catalog

• 
• Programmable Pid Controller Ai 518p / Ai 708p / Ai 808p

  
  * Program : 50 Steps (AI‐708/AI‐808); 30 Steps (AI‐518P); Event Output
  * Input : Universal [All type of Thermocouple and PT100‚ Cu50 (RTD)‚
  * Linear Voltage‚ Linear Current‚ mV‚ 2 wire Transmitter input]
  * Output : Relay ‚ SSR‚ Linear Voltage‚ Linear Current‚ SCR Phase Shift Trigger‚
  * Servo Valve Control / Modulating Output(AI‐808) (Modularized Installable);
  * Soft Start Option (AI‐808); Output Range Limit
  * Control Algorithm : AI PID / AI MPT; Heating / Cooling Dual output with 2 sets of PID;
  * Auto Tuning; Auto/Manual Bump less Transfer (AI‐808)
  * Set Point : Set point Range Limit; Dual Set Point Switch; Remote Set Point
  * Alarm : High‚ Low‚ High Deviation and Low Deviation
  * Communication : RS‐485‚ RS‐232 (Modularized Installable)
  * Re Transmission O/P : Linear Current or Voltage (SV OR PV)
  * Power Supply : more...

• Micon Automation Systems Private Limited  Ahmedabad View Catalog

• Foxboro PAC/PLC T 2550 & T2750

  T2550 Programmable Automation Controller - The Most Affordable, High Availability PAC
  
  Idael For:
  
  * Retort Furnace
  * Glass Furnace
  * Fermentation Process
  * Sterilization
  * Freeze Dryer
  * Building Management Systems
  * Environmental Monitoring Systems
  
  Features:
  * Cost effective controller redundancy - automatic commissioning, bumpless changeover, redundant communications
  * Power supplies - redundant system supply
  * High system availability - redundant CPUs with automatic takeover
  * Online reconfiguration
  * Redundant Data logging
  * Hot swap I/O
  * Alarm monitoring
  * Signal conditioning
  * IEC 61131 programming
  * Advanced PID control
  more...

• Shree Venkateshwara Controls  Pune View Catalog

• Programmable Automation Controllers

  A Programmable Logic Controller (PLC), or programmable controller is a digital computer used for automation of industrial processes, such as control of machinery on factory assembly lines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed or non-volatile memory. A programmable logic controller (PLC) is an example of a real time system since output results must be produced in response to input conditions within a bounded time, otherwise unintended operation will result.

• General Automation  Ahmedabad View Catalog

• 
• 8051/52 Programmer

  8051/52 Programmer is a programming tool hardware and software to program 8051/52 microcontroller ICs.   Our 8051/52 Programmers are simple-to-use, low cost and yet powerful programmer for the 8051 and 8052 family of microcontrollers. These will program, read and verify code data, write lock bits, erase and blank check. All fuse and lock bits are programmable.   This programmer has intelligent on-board firmware and connects to the serial port. It can be used with any type of computer and requires no special software. All that is needed is a terminal/communications program which all computers have.   Our 8051/52 Programmers are ideal for design engineers, institutions, students and freelancers. more...

• GBC Technologies Private Limited  Chennai View Catalog

• Automation PLC Panel

  We specialize in providing automation PLC panel, which is manufactured using quality material and quality-tested components. In order to ensure the reliability and continuous operation, the units are wired and functionally tested. This further helps us in assuring the precision functioning of these panels. Our range of automation PLC panel is based on the latest technology and also conforms to industry norms and standards.

• Prayosha Automation  Mumbai View Catalog

• CPU 317 - 2AJ12

  CPU 317SE/DPM - SPEED7 technology
  DC 24V, 2MByte, work memory expandable up to 8MByte (50% program/50% data), MMC slot, real-time clock, SPEED-Bus
  Interface: 3
  1. MPI 
  2. Profibus-DP master, 12Mbit/s, up to 125 slaves or
      PtP RS485, potential separated, ASCII, STX/ETX, 
      3964R, Modbus master, USS master
  3. Ethernet interface for PG/OP communication
  Programming Language:
  Programmable with STEP7 from SIEMENS more...

• ACS Engineers  Ahmedabad View Catalog

• Industrial Automation Controller

  Our organization provides a wide range of Industrial Automation Controller to our clients at competitive prices. We also provide unitronics make (PLC) programmable logic controller with mi and key board to our clients as per their requirement. These are available in various specifications and cater to the different requirements of our clients. more...

• Shreyas Enterprises  Kolhapur View Catalog

• Allen-Bradley AC VFD

  Reliable Performance. Cost-Effective Solutions. For almost any application you have, and any power requirement you need, you’ll find the solution in the Allen-Bradley® PowerFlex® family of drives from Rockwell Automation. For motor control applications from low to medium voltage, and from simple to complex, the PowerFlex family of drives from 0.2 kW (0.25 Hp) to 25.4 MW (34000 Hp) offer world-class intelligent motor control solutions. Because you have a wide range of control needs, PowerFlex drives offer a variety of motor control technologies, from Volts/Hertz Control for the simplest applications, to Vector Control with patented FORCE™ Technology, which provides excellent low speed/zero speed performance for both induction and permanent magnet motors. Total, Flexible Control So your business can benefit from the very beginning, PowerFlex drives have been designed as a family right from the start. Featuring an advanced, common operator more...

• Sumiran Automations Private Limited  Mumbai View Catalog

• Programmable Logic Controller

  A Programmable Logic Controller (PLC), or programmable controller is a digital computer used for automation of industrial processes, such as control of machinery on factory assembly lines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed or non-volatile memory. A programmable logic controller (PLC) is an example of a real time system since output results must be produced in response to input conditions within a bounded time, otherwise unintended operation will result.

• Coronet Engineers (P) Limited  New Delhi View Catalog

• Human Machine Interface (AE Series)

  We offer our clients superior quality of Human Machine Interfaces (AE Series) which are adequately designed by our diligent and dedicated professionals to meet the needs of clients’. Our products are available at effective costs and they adopt excellent extension designs. Moreover, they are developed from excellent technology and fulfill the demanding requirements of users. Furthermore, our products can be availed in models of 5.7", 8.0" and 10.4" display with monochrome and multiple colors. Given below are the specifications of this series:  
  * 5.7" STN LCD 256 colors
  * 8", 10.4" TFT LCD 65536colors
  * 5.7" STN LCD 8 Shades of Blue
  * 5.7" FSTN LCD 16 Shades of Gray
  * ARM9 32-bit CPU
  * 4, 6, 7 function keys
  * 320 * 240, 640 * 480 pixels
  * 3M, 7M Flash Memory
  * 512K bytes SRAM
  * Supports SM card
  * more...

• Logi-Tech Conttrols  Coimbatore View Catalog

• Programmable Logic Controller(ES Series)

  We are highly acknowledged for our customer oriented services and we offer Programmable Logic Controllers (ES Series). This product also acts as representative MPU for the main sequential control. Moreover, they act as an economical solution for small PLCs. These controllers are available in various specifications and are utilized in food processing machines and landscape fountains.   Specifications:
  * Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
  * High-speed pulse output: Supports 2-point (Y0, Y1) independent high-speed pulse output of up to 10 KHz.
  * Built-in 4-point high-speed counter
  * MPU points: 14 / 24 / 32 / 40 / 60
  * Max. I/O points: 256
  * Program capacity: 4K Steps
    Applications:
  * Spinning machine
  * Elevator control
  * Packaging machine more...

• Logi-Tech Conttrols  Coimbatore View Catalog

• Mid Range PLC

  Far more than a PLC, our Modicon Programmable Automation Controllers (PACs) are built to suit the needs of the process industry and a wide range of demanding automation applications. Modicon M340 can be used individually but is also the perfect companion of Modicon Premium and Modicon Quantum, increasing the performance, the quality and the profitability of your industrial process, facilities or of your machines. "All-in-one CPU"
  * 7 Kinst/ms
  * Multitasking system for guaranteed reflex time
  * USB port for programming and HMI
  * 2 additional ports as required: Ethernet, CANopen, Modbus.
    Comfortable memory
  * Programming code up to 70 Kinst.
  * Application back-up in supplied memory card
  * Additional file storage up to 128 MB with FTP access.
    Specific applications
  * Integrated RTU solution for Water, O&G, Power and Infrastructures
  * Process more...

• Automation Systems, Ludhiana  Ludhiana View Catalog

• Wireless Automation Controller

  Key Functions :
  * Heart of the Automation
  * ON/OFF Street Lights based on Morning and Evening Civil Twilight
  * Control
  
  *
  * Remote ON/OFF settings
  * Remote Alternate Lighting Pattern Settings
  * Remote Dimming Level Settings
  
  
  * Reports Various Electrical Parameters to Server Cluster
  
  *
  * Voltage, Current, Power Factor
  
  
  * Reports Faults
  
  *
  * Fuse Failure, Power Failure, MCB Trips, Over Load, Cross Connections
  
  
  * Uses secured GPRS for Communication
  * Key Sub Modules :
  
  * Twilight ON/OFF Module
  * Wireless Module (GPRS)
  * Sensor Module
  * Power Analyzer Module
  more...

• Machine 2 Machine Solutions P Ltd  Hyderabad View Catalog

• AMF Controller Module

  The AMF Controller Module is a microcontroller based device and is completely programmable at the site. It is totally different from mechanical/electro mechanical based AMF panels. It has a user-friendly man-machine interface with the help of a keypad, LED’s and a LCD display. Since, all messages are displayed on LCD, all the messages are in clear user friendly language. Features
  * Complete AMF logic: Auto, Manual & OFF, with additional PROGRAM Mode.
  * Built in Line Voltage Monitor: LVM sensing the three phase supply for operation in safe limits.
  * Generator Voltage Monitor: GVM, load is transferred to Genset only if running at the correct voltage.
  * Built in timers: Mains Wait, Cranking Wait, Cranking ON, Cranking OFF, Cranking Attempts, Stop Solenoid, Engine Idle Run Timers are built in and fully adjustable by the user.
  * Built in Engine Safety: Low Oil pressure, High Coolant temperature, V Belt failure, and Start failure.
  * While the Mains or more...

• Waders Power Control  Lucknow View Catalog

• Automation Controllers For Paddy Dryers & Steaming Tanks

  Automation Controllers For Paddy Dryers & Steaming Tanks
  
  
  
  
  
  

• Sree Balaji Industries  Coimbatore View Catalog

• Programmable Automation Control

  Manufacturer and trader of programmable automation control.
  
  
  
  
  
  

• G. E. Fanuc Systems Private Limited  Bengaluru View Catalog

• 16 Zone Hardwire Expander

  expand your omni ii automation controller with up to eight of these expansion modules! The module comes with mounting hardware and cable to attach to the controller. Terminals are provided for 16 additional zones that can be programmed for burglary, fire, temperature or auxiliary inputs. Up to 2 modules can be installed on the omni iie, and omnipro ii home control systems. more...

• Eloka Enterprises Private Limited.  Chennai View Catalog

• Pacsystems

  The PACSystems RX3i controller is the latest addition to the innovative PACSystems family of programmable automation controllers (PACs). Like the rest of the family, the PACSystems RX3i features a single control engine and universal programming environment to provide application portability across multiple hardware platforms and deliver a true convergence of control choices.
  
  The RX3i features
  * A high performance controller with a 300 MHz Intel® microprocessor and 10 Mbytes of user memory that eliminates the need for multiple controllers and simplifies control.
  
  * A universal backplane with a highspeed PCI bus running at 27 MHz for fast data throughput for complex I/O and a serial bus for simple I/O that optimizes performance and your investment. The universal backplane also supports HOT SWAP to minimize downtime.
  
  * A wide range of I/O modules (over 40 types available) for simple to complex applications; various network modules are more...

• Masibus Automation & Instrumentation Private Limited  Gandhinagar View Catalog

• Distributed Programmable Automation Controller

  features
  cpu: intel® atom™ n270, fsb 533, 1. 6 ghz
  on-board memory: 1 gb ddr2 sdram
  compact & fanless design
  equipped with 4 serial communication ports; 3 of them are selectable for rs-232/422/485 (auto flow control)
  designed to integrate adlink nudam to form a remote data acquisition controller
  windows® xp embedded (default: english version)
  smart ui with programmable buttons and digital display
  high tolerant vibration and shock capability more...

• Adlink Technology Incoropoted  Bengaluru View Catalog

• Micro Controller

  Our range of micro controllers are designed with interfacing modules, indication diodes & cables that provide efficient performance at client's end. These are available with capacitive and inductive sensors for pouch and cartoon packing. Moreover, we offer special sensors for sensing bags & bag counting. These also include special wafer like illuminated chips for inserting between any plug and socket for switching indication.

• Penta Industrial Solutions  Faridabad View Catalog

• PLC ( Series 90-70)

  Series 90-70 PLCs have become the industry standard for complex applications. The open architecture backplane of the Series 90-70 unlocks the versatility of hundreds of unique VME-based cards for applications involving elements such as vision, specialized motion, or fiber-optic networks. more...

• Gururaj Engineers  Vadodara View Catalog

• Automation Control Systems(D-09)

  Automation Control Systems(D-09)
  
  
  
  
  
  

• DURGA CONTROL SYSTEMS  Bengaluru View Catalog

• Programmable Logic Controllers

  We offer programmable logic controllers ( or PLC's) which are useful in the automation of a wide array of industrial automation processes. The programmable logic controllers (PLC's) are real time systems with an easy to use human interface.
  
  Salient features of our programmable logic controllers (PLC's) are:
  
  
  * 6 Digital and 2 analog inputs for DC (12-24 VDC ) model
  * 8 Digital inputs for AC (110-240 Vac) model
  * 4 Relay Output
  * 16 Timers, 16 counters, 4 Timeswitches and Auxillary relays.
  * IO’s extendable upto 32 inputs & 16 outputs
  * LC back lit Display with Auto, on/off selectable
  * Interface for Memory Card PC
  more...

• Magmaa  Pune View Catalog

• AV212-003-Control Your Home Environment From a Single Remote

  Introduction :
  
  Experience the ease of home automation control with ViewSonic's V212-003 10.4" wireless touch screen display.
  * Combines ViewSonic's V212 touch screen powered by Superna's Home Automation software to control Leviton’s Vizia RF +™ wireless lighting products and other Z-Wave compatible devices
  * User-friendly interface makes it easy to adjust the volume, turn on lights or the A/C, open or close shades all from the comfort of your couch
  * Provides a superior home automation interface in a high-performance, lightweight touch screen design
  
  more...

• Levia Technologies  Navi Mumbai View Catalog

• Programmable Automation Controllers

  Programmable Automation Controllers
  
  
  
  
  
  

• Calcon Sales  Pune View Catalog

• (Programmable Automation Controllers) Compact Logix System

  
  * Compactlogix is a powerful logix-based control system that is more compact than others of its kind.
  * bringing together a logix controller with compact i/o, compactlogix controllers are perfect for tackling smaller, machine-level control applications with unprecedented power and scalability.
  more...

• Ad Electronics Private Limited  Mumbai View Catalog

• Process Automation Controller (Premium)

  Process Automation Controller (Premium)
  
  
  
  
  
  

• Supertech Instrumentation Services ( I ) Private Limited  Thane View Catalog

• Modicon Premium Plc

  Modicon Premium PLC
  
  
  
  
  
  

• Expert Instruments Private Limited  Pune View Catalog

• Vxi

  National Instruments offers the broadest range of VXI control solutions available today. VXI controllers from NI incorporate off-the-shelf PC technologies to deliver state-of-the-art VXI control solutions. NI-VXI/NI-VISA, which is shipped with all controllers, provides a rich API that complies with all of the latest VXIplug&play standards. more...

• N. I. Systems India Private Limited  Bengaluru View Catalog

• DC Drives

  Our clients can avail from us a superior quality range of DC drives (GE 157) which can accept different types of inputs like START, STOP, INCH (OPTICALLY ISOLATED) & 0-5V, 0-10V,4-20mA as reference. These are manufactured using premium quality raw material and are available in the market at highly competitive prices. The range of products we offer can work with normal conventional DC motors with field winding as well as permanent magnet DC motors.
  
  Features:
  * Fuse Protection
  * 1 hp/ 2 hp selection through link
  * Normal / PMDC motor selection through 1 link
  * RUN (start) stop, inch selection through optical isolator so that command from PLC / external source can be given to the drive
  * LED indication for quick fault finding / status indication
  * Soft start
  * Field fail protection
  * Armature current limit / Trip
  * The speed of DC motors is directly proportional to the armature voltage with fixed field excitation.
  * more...

• Gururaj Engineers  Vadodara View Catalog

• Automation Controllers For Paddy Dryers & Steaming Tanks

  Automation Controllers For Paddy Dryers & Steaming Tanks
  
  
  
  
  
  

• Sree Balaji Industries  Coimbatore View Catalog

• Process Automation Controller (Quantum)

  The Quantum, Premium and M340 Modicon PLC series are based on powerful 32 bit Intel Pentium processors providing a high processing speed. They are characterized with hot swapping of I/O modules. With an Extensive diagnostic (3 level) up to I/O level channel level, they have an integral 100 Mbps Ethernet communication port. more...

• Supertech Instrumentation Services ( I ) Private Limited  Thane View Catalog

• Programmable Electrical Protections

  This device is helpful in continuous monitoring of frequency of the input supply. If in case the frequency changes from the set limit, It energizes the electromagnetic relay. This type of safety relay is useful in generator control panels, frequency sensitive equipments, etc. This unit also protects any electrical load from over loading. Various types of programmable electrical protection we manufacture are Over / Under Voltage Relay - OUV-110, Over / Under Frequency Relay - OUF-110, Engine Start Relay, Over Current Relay, Earth Fault Relay, Temperature Controller Relays, etc.

• Waders Power Control  Lucknow View Catalog

• School Bell Management System

  
  * Built around world's most latest microcomputer based technology.
  * The unit rings the school bell at the programmed times.
  * Intends to provide completely 'unmanned' operation of school bell.
  * On site programming facility.
  * There is provision for up to 15 different bells throughout the day.
  * All bell durations can be programmed separately, along with the time i.e. Length of bell can be changed according to needs at different times.
  * Separate programming is available for Weekdays and Weekends.
  * Even the weekend can be defined i.e. Friday or Saturday.
  * Precise digital clock.
  * Displays real time clock in 24 hours format, along with the day of week.
  * User interface by means of LCD(Liquid Crystal Display) and pushbuttons.
  * Parameters are entered by means of 4 push buttons i.e. SET, NEXT, UP and DOWN.
  * Real time clock (RTC) backup is available in case of continuous power disruption for app. 2 years, to keep the clock more...

• Waders Power Control  Lucknow View Catalog