![]() |
|
||||||||||||
|
|
Products Directory > Electronics & Electrical > Switches, Sockets & Relays >
Pressure Switches
![]()
Products - 89
|
Pressure Switches |
Displaying 1-50 of Total 89 Products Found |
Products

We manufacture level gauges, that are highly efficient and durable in nature. This product comes with an aluminum float indicates the level of oil, fuel under pressure. It is horizontally mounted for easy reading. The specifications for this product are: more...
|
Rico
|
|
![]()

A device to prevent Equipment from running when lubricating oil/air pressure drops below safe limit. Spring loaded rubber diaphragm type.
Rating & Trip Temperature : Maximum pressure 500psi/35kg/cm2 Set pressure pre set 0 to 20 bar.
Contact Rating : 115V AC 5 amps / 12V / 24V DC. more...
|
Rico
|
|
![]()

We are into trading of gas train components from Krom Schroder which is one of the world's leading manufacturers of gas train components. Used for pressure regulation, shutoff and control of gas, these are supplied to ensure complete gas control station to for safe and efficient operation of the system. The various components are listed below: more...
![]()

We are engaged in offering a procured range of Dwyer - Dual Action Explosion Proof Pressure Switches - A1ni that is explosion-Proof, UL & CSA listed for class I, groups B, C & D and class II, groups E, F & G. The H2 is designed for sequencing two different actions as pressure of a liquid or gas increases or decreases. Moreover, the patented design of these switches consists of two concentric pistons operated by a single diaphragm with one pressure chamber, where each piston actuates a separate switch independent of the other.
These switches may be adjusted to operate together, at opposite ends of the range or at two intermediate set points. The threaded top in the system can be removed to field adjust or service switches without disturbing electrical or pressure connections. Furthermore, these are explosion-proof and weatherproof and can be mounted in any position and are not affected by vibration. more...
![]()

Our qualitative Pressure Switches controls the circuit open or close on increase or decrease pressure of controlled medium. Developed using quality raw material, our switches are used in power shift transmissions, anti - skid braking systems, air compressor systems, excavator hydraulic systems, and other industrial equipment requiring pressure protection.
Features:
• Efficient performance
• Corrosion resistance
• Sturdy
• High strength
• Durable more...
![]()

Carbon Brushes: All type of carbon brushes for over head cleaners DC Motors, Generators etc.
Pressure Switches: Differential pressure switches like Varma tarfag, Astrix, Indfos, Orien Pressure.
Switches are assembled in spinning, Combar, simplex, compressors and generators. more...
![]()

We offer a wide range of Temp. Sensors and Switches, Pressure Switches, Solenoide Valves and Potential Sensors that is in great demand because of high efficiency and durability. Our range of products in thoroughly checked at every stage to ensure the quality at par with international standards. The entire range of Temp. Sensors and Switches, Pressure Switches, Solenoide Valves and Potential Sensors includes: more...
![]()

We offer various types of pressure fittings, which are used to measure the working pressure of lubricant as well as for pressure setting in lubricants. These products are made of high grade raw material that provide in them high performance life. Some of the products we offer in this category include : more...
![]()

We are manufacturing switches and meters to our clients as per their specifications. Our experts and engineers are capable enough to maintain pace with the latest trend of the marketplace.
Volt Meter
Ammeter
Freq Meter
KW Meter
TEMP. Sensors
Temp Switch
Pressure Switch
Flow Switches
Local-Remote Switch
Micro Limit Switch
![]()

WIKA offers a complete range of electronic pressure measuring instruments like pressure sensors, pressure switches and pressure transmitters for the measurement of gauge, absolete and differential pressure. Our pressure measuring instruments are available in the measuring ranges 0...0.6 mbar to 0...8000 bar.
These pressure measuring come supplied with standardised current or voltage output signals (also intrinsically safe or with flameproof enclosure according to ATEX), interfaces and protocols for various types of field buses. more...
![]()

We hold expertise to
manufacture and supply high standard air & oil pressure
transducers / sensors. The oil pressure sensors
offered by us come in two forms, they can be only transducer (only
sensing function) as well as with dual function of both pressure
sensor as well as switches.
These sensors are
generally made of highly sensitive metallic diaphragm to provide
precision pressure indication along with switching on the warning
lamp in case of pressure falling below specification. more...
![]()

We are offering Pressure Switches & Vacuum Switches.
Features :
• No+NC Type
• Setting Range upto 100 bar
• Tolerance @ 20ºC upto ±3 bar
• Adjustable Hysteresis
Specification :
• Case : Passivated AVP steel
• Electric contact : Silver Plated
• Max switches Current : 5A, 250 VAC
• Max fluid Temperature : 120ºC
• Action type : 1B
• Protection degree
a) with cap 3015001 : IP 54
b) with Din cap 3900003 : IP 65 (Din Cap)
• Hysteresis : 15 to 30% of setting value Adjustable more...
![]()

Our customized range of pressure switches is available in different varieties like such as flameproof, electronic and weatherproof. These switches are of fixed differential type and diaphragm operated. The electronic pressure switches are built on the basis of Strain Technology.
Some salient features of our fireproof pressure switches are: more...
![]()

We manufacture wide range of pressure transducers and pressure switches. Pressure transducers for electrical oil pressure gauges are available in 0-7Kg/ cm2 and 0-10kg/cm2. Robustly built with accuracy and fully calibrated, electrical oil pressure gauges in NS designs available in 52mm/ 60mm dia. Pressure switches are available with S.P.DT switch, Diaphragm type construction ideal for engines, generator for low lube and crank case oil pressure.
![]()

We are one of the Largest Stockist of Indfos Pressure Switch in Coimbatore and we Stock entire Range in different model in ready stock.
MP : Low Pressure, High Pressure & Combined Low High Pressure Controls for Refrigerations and Air Conditioning Compressors.
PS/PSU : Pressure Switches for Air Compressors
IPS: Economy Pressure Switches for Industrial Applications
RTP : Weather Proof Pressure Switch for Industrial Applications
B : Weather Proof & Explosion Proof Pressure Switches for Process Applications.
MP : Differential Pressure Controls for Pressure Lubricated Refrigeration Compressors.
IPSD : Economy Differential Pressure Switches for Industrial Applications.
D : Differential Pressure Switches for Process Applications
MP : Temperature Controls for Commercial Refrigeration Systems / Air Conditioning Plants.
RTT : more...
![]()

Supported by our dexterous team of workers, we are engaged in supplying a qualitative range of pressure switch and pressure sensor. These are incorporated with advanced technological features that ensures high efficiency and easy usage. Standard compliant, our range is available in proper and safe packaging and at industry leading prices.
Pressure Switch more...
![]()

We offer our customers with an extensive variety of transmitters switches that is widely demanded by our clients across the country for its exceptional performance, reliability and durability. Available in bulk quantities within a short lead time, the transmitters switches offered by us include the following: more...
![]()

Leveraging on vast industrial experience, we offer our esteem clients industrial pressure switches such as high pressure and low pressure. We offer clients pressure switches in different varieties such as flame proof, weather proof and electronic. Our range of switches is of fixed differential type and diaphragm operated and is built on strain technology. Extensively used in laboratories, purging processes, analyzers, semi-conductors, production devices, medical equipment and other sampling lines, our instrument offers longer functionality.
Some salient features of our fireproof pressure switches are : more...
![]()

We manufacture and supply various lubrication acessories that includes pressure gauge, pressure switch, oil filter cum air breather, suction trainer, suction trainer, etc. more...
![]()

MN/MA/MB series pressure switches are housed in pressure die cast aluminium powder coated enclosure and are recommended for panel mounting or outdoor service based on the type of enclosure opted for. These can also be used in hazardous areas by choosing a flameproof enclosure certified by CMRS, Dhanbad. The repeat accuracy is better than +/- 1% FSR.A 3/8cable entry is provided for cables and a terminal strip suitable for wired ends is provided inside the enclosure. Pressure port is 1/4 BSPF standard.
Features: more...
![]()

We hold expertise in providing a range of pressure switches, which are
in line with the industry established standards. Manufactured from high
grade raw material, our pressure switches are priced competitively.
Specifications of pressure switches:
more...
![]()

We offer a wide range of pressure / temperature switches & thermostats that are used for compressor loading and unloading. Available in different specifications, these are suitable for refrigeration, air conditioning and controlling of various industrial instruments. Developed using quality raw material, our range is known for efficient performance, corrosion resistance and better durability standards. Further, our range is thoroughly checked at every stage to ensure the quality at par with international standards. more...
![]()

Suitable for Natural Gas, LPG, Propane, Air etc. more...
![]()

PS Pressure Switches are essentially meant for On-off pressure control applications such as air compressor or water pump and makes it work between the minimum and maximum setting values,at the maximum setting value,pressure switch opens and stops the motor , at the minimum value , pressure switch close and starts the motor
RTD Series of Pressure Switches utilize seamless bellows as the sensing element.Simplicity of design and ease of installation has been stressed for reliable use,even in applications where shock and vibration are present.The sensing element can be used for a variety of process fluids.
IPS Series of Temperature Switches have a vapour filled thermostatic element, which consists of a sensing buib, capillary tube and a bellows element,The entire element contains a charge which reacts to temperature variations at the sensing bulb, so that pressure on the bellows increases on rising temperature.The bellows movaement due to this increase more...
![]()
a) Pressure Difference Switches With Fixed Differential
DP Switch (Single Diaphragm Type), DP Switch (Two Diaphragm Type)
Range from 0 to 1 Bar up to 0 to 25 Bar
Accuracy : +/- 1% FS
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Migration : Impossible
No. of Switches : one no.
Type of Switches : Micro Switches - SPDT
5 A 230 V AC or, 0.2 A 250 V DC
Housing IP 54 or, Flameproof
Pressure Housing Aluminium, Brass, SS 316 or, special on request
Process Connection ¼” BSP (F) or, special on request
Application : For Filter, Heat exchanger healthiness indication & auto cleaning systems For safety interlocks on Air, Gases, Liquids, Steam etc. lines. Diaphragm Sealed DP Switches
can be used for differential pressure measurement of Pest and Slurry's also.
b) Adjustable Differential Type DP more...
![]()
We supply a wide assortment of gauges switches and transmitters, which are suitable for various industrial as well as general purposes. These are largely acclaimed amidst our clients owing to their exclusive features including accurate dimension, high performance and excellent durability. Our range is available in different specifications to suit the varied requirements of clients.
Ms Pressure Gauges - General Purpose
Specifications:
Standard Version: 40mm, 50mm, 63mm, 80mm, 100mm, 150mm, 250mm more...
![]()

We offer pneumatic airline equipment like filter regulators and digital pressure switches for pressure control with internal stainless steel diaphragm, digital display, 2 solid state contracts or 1 solid state plus 1 analog output, linearity error 0.5% fs.
We offer a wide range of filter regulator and digital power regulator that server the requirements of diverse industrial applications. These are available in customized as well as standard designs. more...
![]()

a) Adjustable Differential Switches
b) Fixed Differential Pressure & Vacuum Switches
c) 2 SPDT Adjustable Stage Differential Switches
d) 2 SPDT Fixed Stage Differential Switches
Range : 0 to 760 mm Hg Vacuum or, from 0 to 1 Bar up to 0 to 400 Bar
Differential (Dead Band) - Adjustable
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no.
Type of Switches : Micro Switches - SPDT
Switches of Range 1 Bar upto 400 Bar & Vacuum 5 A 250 V AC or, 0.2 A 250 V DC.
15 mm Wc upto 2500 mm Wc 2 A 250 V AC.
Sensing Element : Diaphragm (PTFE or Neoprene) or Piston
Enclosure : Dust Proof (IP 40), Weather Proof (IP 54), Water Proof (IP 65), Flameproof to group IIA/IIB or Flameproof to group IIC
Pressure Housing Aluminium, Brass, SS 316 or, special on request
Process Connection ¼” BSP (F), Line Mounting, Surface more...
![]()

To meet wide requirements of our clients, we have adopted international manufacturing standards for fabricating a precision engineered range of industrial compact switches, MF (High Pressure Switch). Confirming with various industrial standards, these are housed in pressed steel powder coated enclosure and are recommended for panel mounting or indoor service.
Features: more...
![]()

Pressure Switches more...
![]()

We offer our clients with a wide range of pressure gauges/switches as capsule pressure gauges, differential pressure gauges, that is designed and developed as per the latest technology used in the industry. Available in customized specifications, these pressure gauges and pressure switches are appreciated for having reliable performance and durability.
Our range can be broadly categorized into the following:
"See attachment for details" more...
![]()

We manufacture a wide range of oil pressure switches, which are used to give an indication (either to a warning light or other indicator) when the oil pressure in the engine decreases or increases beyond the specified limit. The function of this switch is of utmost importance, as failure to note the fall or rise in pressure may result in engine getting seized or malfunctioning. The most important point for developing and manufacturing these switches are : more...
![]()

We put forward state-of-the-art SA series ( a variant of SM series) pressure switches from Orion. These pressure switches have a cast aluminum enclosures, intended for in-house use. These are generally used where size is a constraint. The repeat accuracy is better than ± 2% FSR. A connector to DIN 43650 is provider for ease in wiring. It comes with a standard ¼ BSPF standard pressure port.
The pressure switches come with special features which are:
Compact
Light weight
Electrical rating : 5A, 250 VAC; 0.2 A, 250 VDC (res.)
Choice of whetted parts to suit working media
Proof pressure available can be 4 times MWP (optional)
Pressure port: ¼ BSPF
![]()

We offer precision engineered range of differential pressure switches that are known for their reliable readings and effectiveness. These are subjected to several quality tests so as to ensure they offer accurate readings. Additionally these are available in the following specifications:
Specifications:
more...
![]()

We offer low cost miniature switches which is well designer as per the requirements and easy to use . For Specification Please Click the Download more...
![]()

Offering oil pressure switches for machinery function. more...
![]()

DIAPHRAGH PRESSURE GAUGE
Designed for fluid, gases, Food processing, chemical, pharmaceutical application
Diaphragm sealed gauges are designed for systems needing contact surface that are rigorously cleaned and totally safe. The function of diaphragm is to isolate the pressure gauge from the process fluid, preventing bacterria developing inside pressure gauges sensing element.
The advantage of the flush diaphragm gauges is easy to clean. SS316 stainless steel (Non-corrugated) gauges to suit the environment to which the material will be subjected in its lifetime.
RANGE OF DIAPHRAGH TYPE PRESSURE GAUGES
• Compact sealed( Weather proof and glycerin filled)
• Chemical sealed(Weather proof and glycerin filled)
• Triclover gauges(Sanitary gauges) (Weather proof and glycerin filled)
• Homogenisor gauges(Heavy duty, compact type, tongue types connection, Electric contact type homogenisor gauge etc)
• Mud gauges(glycerin more...
![]()

Model 1950 Explosion-Proof Differential Pressure Switch combines the best features of the popular Dwyer Series 1900 Pressure Switch with an integral explosion-proof and weatherproof housing, making it an exceptionalvalue for either application. It is CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres (NEMA 7&9), Raintight (NEMA 3). Weatherproof features include a drain plug and O-ring seal in cover. Electrical connections are easily made by removing front cover. For convenience the set point adjustment screw is located on the outside of the housing. Twelve models offer set points from. 03 to 20 w. c. (7. 5 to 5 kPa)and from. 5 to 50 psi (0. 035 to 3. 5 bar). The unit is very light and compact about half the weight and bulk of other explosion--proof or weather-proof switches with separate enclosures. more...
![]()
Pressure Switches
![]()

Pressure Switch ZNCN / 151
Spare Kit ZQNCN / 151 / 00 more...
![]()

INDUSTRIAL PRESSURE AND TEMPERATURE SWITCH more...
![]()

We manufacture a range of pressure switches as per the requirement of our customers. These are available in different varieties like:
• Flameproof
These are fixed differential type and diaphragm operated. The various features that this category includes are: SS-316 wetted parts, SS-316 diaphragm, flameproof to Gr.IIA & IIB, T6, ¼”NPTF process connection, IP66 cast aluminium enclosure, ¾”ETF single cable entry & SPDT microswitch.
• Weatherproof
Our weatherproof pressure switches are fixed differential types and diaphragm operated.
• Electronic
The electronic pressure switches are built on the basis of Strain Technology. They are used for pressure switch applications that include measurement. more...
![]()

Pressure switches are designed from Vacuum to pressure. The most important component for controlling pressure is the sensing element. Pressure sensors for both metallic and elastomer are suitable for most applications. Pressure sensors are normally bellows, diaphragms and piston. This works on force balance principle. Media pressure on the sensing element contracts the force of the range spring (adjustable by the adjusting nut) which moves the piston shaft only a few thousandths of an inch to directly actuate the electrical snap action switching element.
![]()

PRESSURE SWITCH UPTO 10 BAR
![]()

Oil pressure switches manufactured at Ace Meters, Provide input to Low Oil Pressure Indicator when pressure drops below safety level.
Options
Diaphragm type NO / NC (normally opened circuit or normally closed circuit)
Specifications
more...
![]()

Offering mechanical pressure switches in diaphragm or piston design avilable in CETOP version. Pressure range up to 600 bar, higher pressure ranges on request.
Features
more...
![]()

We are manufacturing electronic dual pressure switches for pressure control with internal stainless steel diaphragm, digital display, 2 solid state contracts or 1 solid state plus 1 analog output, linearity error 0.5% f.s
Features
more...
![]()

The Series ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The ADPS is available with settings from 0. 08 w. c. (20 Pa)up to 16 w. c. (4000 Pa). The silicone diaphragm and PA 6. 6 body make the series ADPS perfect for use with air and other noncombustible gases. more...
![]()

HM series pressure switches have a pressure die cast aluminium powder coated enclosure and are recommended for manifold mounting hydraulic applications. The repeat accuracy is better than 1% FSR. A connector to DIN 43650 is provided for wiring. Mainly intended for high pressure hydraulic presses.
![]()

Application Area : more...
![]()
Category Matches
Related Trade Leads
|
Pressure switches :
Make - orinon
Model - Mn
Type - H01 CA10
Sr no- A0404421 (Buy) |
|
|
Offering Innersole-Rand t30 Series Air compressors - Pressure Switch -
Rec. tank.
Innersole-Rand T30 Series, Model - 234, 242, 253, 2540, 2340, 2... (Sell) |
|
We are offering diverse range of pressure switches like:
- Compact Pressure Switch
- Electronic Dual Pressure Switch etc.
* Features: High qu... (Sell) |
|
We are offering diverse range of electrical switches like:
- Rocker Switches
- Rotary Switches
- Push Button Switches etc.
* Features: avail... (Sell) |
|
Offering wide range of valves, filters, switches and gauges like:
- Pressure Switches
- Power Relay
- General Purpose limit Switch
- Gate Val... (Sell) |
Tender Notifications
B2B Newsletter Subscription