Products Directory > Electronics & Electrical > Passive Devices >
Power Resistors
Displaying 1-20 Products of Total 44 Products Found
-
Products
- Description
- Supplier Information
We manufacture a range of battery discharge resistors. These resistors are made from robust assembly consisting of copper- nickel alloy wire grid elements supported on M.S. tie rods insulated from each other and the enclosure with micanite tubes, washers. The unique design of elements allows rapid, natural cooling of resistor bank.
- National Resistors
We also supply and distribute various chips which are offered in: more...
- Siricom Technology
We offer ISO 9001 certified wire wound resistors of radial and axial type, silicon coated and ceramic type. Our wire wound resistors are available in:
I. Power Ceramic Encased (SQP):
more...- Isha Agencies
We are adept at designing and manufacturing a world-class range of Starting /Speed Control Resistor for Motors. For starting/speed control of A.C. or D.C. Motors, our resistors are manufactured as per customer's requirement. Rating can be 2 min, 5 min, 10 min, continuous or intermittent. Resistors are normally made of stainless steel AISI - 304, AISI-41 0 or AISI 430 or FeCrAIAISI- 406, Cast-Iron.
- National Resistors
Our high qulaity chip resistors have the following features: more...
- Siricom Technology
We produce a range of starting/speed control/buffer resistors for motors. These resistors are used to start and control the speed of A.C or D.C. Motors. We have used good quality raw material of resistor that is normally stainless steel AISI-304, AISI -410 or AISI 430 or FeCrAl-AISI-406. These are mainly used for cranes. The rating can be 2 minute, 5 minute, 10 minute, continuous or intermittent. Besides our regular range, we also manufacture as per customer’s requirement at specified starting torque or for limiting initial inrush current to an acceptable value.
Standards Followed more...- National Resistors
Metal Oxide Film Resistors is a group of power type high quality resistor with special metal oxide film which is thermo chemically burned on the high heat conductive base material. These are most reliable products which can be used easily for various kinds of electronic devices and instruments. These products have got flame resistant coating type as well as non flame resistant coating types which further improve their quality.
Features :
• Stable performance
• 0.125 W to 0.50 W
• Range 10 to 1 M
• High safety standards
• Tolerance 1% & 5%
• Excellent flame retardant coating
• High purity ceramic core
• Low noise with high resistance value
• Best resistivity to heat and humidity- Kaytron Components Private Limited
Having a resistance range of 1-1M, power capacity of 50W-500W and the special feature being can be used for high voltage application having a tolerance range of +/- 5%. more...
- Kiyosh Electronics
We are also offering top quality Dynamic braking resistors (DBR) that are used to absorb the energy generated while stopping electric motors. They function to absorb this energy & cool down quickly between stops .We have developed a wide range of DB resistors for locomotives & metro vehicles, that are manufactured in standard or customized packages as per request. Units can be supplied either as open banks or mounting into existing enclosures. High quality iron-chrome-aluminum ( Fe Cr Al ) alloy or Stainless steel ribbon bank resistors feature a 3-inch wide stainless steel resistive alloy element that is serpentine, formed from one continuous strip. These are designed with superior mechanical strength to eliminate possible internal shocks. The element and terminals are rigidly supported by two mica-insulated through-bolts. Elements are double insulated to ground & end frames are provided with slotted mounting holes for easy installation. Available with multiple taps. more...
- King Industrie
Twin range of RF loads or terminating load resistors are designed to give an economic solution to ever growing need for a compact, rugged and simple termination suitable for bench or field use.
The coaxial loads either utilize a low noise chip resistor or Rod resistors depending upon the required power rating. Black anodized aluminum alloy heat sinks are used for maximum thermal radiation with N type connectors however other connectors may be offered to meet particular customer requirements.
Twin loads are available for use over the frequency from 1 GHz to 4 GHz and at a power ratings 50W to 500W .other power rating may be available on request.
Applications
Transmitter/Combiner output termination
Co axial line terminations
Circular Port terminations
Types and Specifications of Dummy Loads
50 Watt, Convection-Cooled Dry - N, BNC, TNC, SMA, 7/16 DIN
Specifications
Ambient Temperature -10º C to 50º C
Connector N, BNC, TNC, SMA, 7/16 more...- Twin Antennas
Our company offer a wide range of standard shunts in manganin wire, which are used for current measurement or for voltage sensing.
These shunts provide solutions and are very useful in power supplies, inverters, & battery chargers. Available in various ranges, starting from 1 amphere to 15000 Amp. and also available as per the specifications mentioned by our clients to meet their exact need.- Paramount Electrical & Mechanical Industries
Specification: Double
The slide wire rheostat double is an extension of the above stated rheostat however with small differences. It is constructed with Black oxidized Eureka wire (copper Nickel Alloy wire) which is wound on enamelled steel pipe with a diameter of 50mm and length varying from 300mm, 375mm to 450mm. M.S.End supports are used for mounting the pipes. The rider is constructed of tempered phosphor bronze sheet, which serves the purpose of voltage and amps control in electrical circuit . To meet higher loads, porcelain pipes are used. There is a provision for customization of the product according to the requirement of the user. more...- Resistors India Mfg. Co.
We are the authorized dealers of various manufacturers including Gujarat Poly-Avx Electronics Limited (GPAEL). We procure metal oxide variastor from it. Being a voltage dependent resistor, it has fast response time and excellent voltage ratio.
Its symmetrical voltage-current characteristics helps in protection of almost all types of electronic devices or elements from switching and induced lighting surges. It is widely used in the electric engineering applications due to its non linear exponent characteristics that are ideal for a huge variety of applications and assemblies. It offers excellent surge current handling capability and performs efficiently in clamping voltage characteristics. Its great voltage and energy ratio provides low leakage of current.
It is used in the following applications more...- Altek Systems
Specific Name: Terminal Block for 1Phase Resistor Box
The terminal block that we offer is fitted at the bottom of the resistor box and at front side of the resistor box. The electrical circuit of the resistor box is connected to the terminal block .There is a facility to connect the motor terminals. Made of high temperature glazed porcelain bushes and high quality mica washers.
Technical parameters are specified below: more...- Resistors India Mfg. Co.
Features:
more...- Kiyosh Electronics
An NGR is primarily a safety device that reduces shock hazards to personnel & equipment. They provide protection against high voltage. These are also used to protect power transformers, power generators & other allied equipment in power systems against 50/60 H faults (short circuit) and transient phenomena (lightning). These resistors offer protection against high voltage & are virtually maintenance-free. Its technical specifications are as follows: Materials used: Our Neutral grounding resistors are made from tough steel grids of a high quality iron-chrome-aluminum ( Fe Cr Al ) alloy or AISI 304 SS. They are non-corroding & offer good electrical stability thus eliminating maintenance problem & are suitable for installation in outdoor atmosphere. Insulation: Our neutral grounding resistors use mica and ceramic insulators. Ventilation: Neutral grounding resistors are contained in fully protected and ventilated more...
- King Industrie
The Carbon Film Fixed Resistors manufactured by the company have got high resistance temperature where the resistance value is inversely proportional to the temperature. These products are big in volume which cause dissipation of heat and low temperature rise providing them good quality, stability and reliability. These product are mainly used in consumer electronic appliances.
Features
• High Quality Performance
• 0.125 W to 2 W
• Range 1 to 10 M
• Tolerance 5%
• Automatically insert- able and formable• Highly economic
• Flame retardant type available
• Too low or too high values can be supplied from case to case bases- Kaytron Components Private Limited
Extensively used in cooling a semiconductor element or a resistor element with water. These resistors have high wattage in smaller size with water-cooling. Our manufactured resistors are used in diverse applications across various industries including; electrical, air conditioning and more. more...
- Kiyosh Electronics
Coils made by us come in different sizes and are essentially made of fechral alloy. The Resistance coil is made by edge winding of the strips with multiple turns which are cut as per design to obtain required resistance values. These coils are inserted on porcelain grooves, which are supported by a metal plate. Such type of elements are fitted on metal trays of the resistor box. These trays are stacked one over another inside the resistor box fabricated with MS anges & CRGA sheets.
- Resistors India Mfg. Co.
We are a leading name in supply of Power Wire Wound Resistors, which offer low cost and higher durability to clients. These resistors have got varied number of features and are available in a wide range starting from 0.01 to 100K.
Features :
• 10 W to 200 W
• Small in size but capable of carrying high power load
• Unchanged resistance value even after long use
• Good resistivity to short time overload- Kaytron Components Private Limited
