 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Electronics & Electrical > Power Generators & Alternators >
Power Distribution Units
Products - 15
|
Power Distribution Units |
Displaying 1-19 of Total 19 Products Found |
Products
We offer power distribution boards that are fully designed, tested, wired and assembled with various electric switchgears like MCCB's / MCB's installed inside it. Copper or aluminum bus bars are used to manufacture these boards. Our PDB's can provide up to 4000 amperes incoming power distribution with single or multiple incomings. These distributions boards use ACB's, SFU's, MCCB's or MCB's as power elements along with digital or analog metering and control elements.
The range of our power distribution panels are mainly used to distribute direct current or DC power from one supply to other devices. These type of distribution panels monitor and protect DC systems and serves as an effective power distribution system. Our power distribution panels are applicable in: more...
We manufacture high grade power distribution boards that are used in numerous industries to distribute direct current to different instruments. These power distribution boards are built in a way so as to ensure maximum safety, along with maximum space utilization and cost effectiveness.
The display panels’ on these power distribution boards displays all the relevant information and the control panel ensures proper handling. Our ability to customize to customize these power distribution boards according to the requirements of different industries has made us a popular choice in the market. more...
We fabricate fiber distribution cabinets or patching cabinets which serve as an intermediate media between line side & equipment side of the optical fiber network. It connects optical line splicing / termination box on one side and on the other side connects to the optical line terminal equipment / OLTE.
This cabinet acts as a storage unit to store extra length of pigtails / patchcords. It also facilitates the testing of transmission lines and terminal equipment.
Technical Details:
Our fiber distribution cabinet with 24 F capacity is rack mountable & consists of a single shelf containing 24 nos of FC / PC adaptors. Shelf is fitted on telescopic channel which facilitate sliding in front direction for easy operation and maintenance. For small fiber counts only no. of adaptors pre-installed will change.
Height: 100 MM(Outer)
2U=(44.45X2)=90MM
Width: 440 MM
Depth: 275 MM
Power Supply for Gel/Paper Electrophoresis with Dual Output. The power supply has two modes viz. Constant Current & Constant Voltage with a toggle digital display. Capacity 30 - 300 Volts DC and 10 - 100 mA. The power supply is housed in a rugged MS powder coated body and is elegantly styled to give a convenience of operation.
We offer clients precision engineered outdoor power distribution mains. These are designed to take electricity supply directly from mains source or generator and allows uninterrupted power distribution throughout the site of outdoor event. Further, the cables are discreetly laid to provide sockets for bands, lighting rigs, heating systems.
Process: more...
The exclusive range of power distribution board is designed, wired, tested and assembled with different electrical equipment.It saves the installation cost, cost of equipment storage, handling and field testing.Also, these can be customized as per the clients’ specifications.
Some of the components of our range are as follows:
more...
INTERFACE power supply: Power supply units from Phoenix Contact - Power for every application!
QUINT POWER- overview of features: Reliable starting of heavy loads with high inrush currents through the static POWER BOOST power reserves (up to 1.5 the nominal current over long period of time) Can be used worldwide in all industrial sectors thanks to a large approval package High operational reliability of all three-phase devices, even in the event of a permanent phase failure
Remote monitoring: Active switching output and floating relay output. more...
The power distribution board we offer to customers are carefully designed, wired, tested and assembled with various electrical equipments installed inside it. These distributions boards are used to house items such as :
• Motor control centers
• Metering equipments
• Transformers
• Batteries
These power distribution boards not only save installation costs but also cost of equipment storage, handling and field testing. more...
We manufacture power distribution boards that not only save installation costs but also cost of equipment storage, handling and field testing. Following are the features & application of our product:
Features
:-
more...
We specialize in manufacturing various power supply units and power distribution units as per the industry standards and customer’s specifications. Our power supplies are also known as power pack, DC to DC converter and switch mode power supply. All our units have latest and modern current mode PWM controller. Use of MOSEFTs and UFR diodes increases the reliability and efficiency of our power supply unit. Some of its special features include: more...
We offer our clients wide range of ring main unit (RMU) that are used for H.T.side. Our range is offered with 3 numbers of switches (Circuit Breakers or Isolators or LBS). These are widely used for two inputs with mechanical or electrical interlock and also provided with one outgoing to ensure heavy load bearing capacity. Further our range can also be offered with one input with two outgoings. These are also used for redundancy feeder purposes. more...
We offer high quality distribution board (SDB) to customers, which divides electrical mains feed into various circuits and provide a fuse or circuit breaker for each circuit. The distribution boards mainly have main switch and one more residual current device for over current protection. We offer the range to customers at the most competitive prices and shortest delivery timings.
Our range of FDMS modules rack mountable modules are well designed. Durable in quality, these rack mountable modules are box shaped. Made from sheet metal, these are durable in quality and have a longer working life. These mountable modules are used in both splicing and patching activities.
Rising mains power distribution boards offered by us are precision designed to effectively meet power distribution demands. Designed to effectively handle electricity supply directly from main source, its unique construction allow uninterrupted power distribution. more...
Indoor power distribution boards offered by us feature innovative designs to deliver optimum functionality. These also feature option of pad-lockable windows to provide better security. We can deliver these in both standard and customized specifications. Features: more...
We manufacture FDMS modules rack mountable of the RC- Series . The fiber distribution modules are of 6F to 72 fiber capacities, suitable to mount on a standard 19" rack or an ETSI rack. These FDMS modules can cater the need of centralized availability of the large volumes of O. E cable with flexibility for configuration, relocation and testing. They are designed to terminate the loose tubes / transport tubes coming from the O. F. cable after fusion splicing of the fiber with the corresponding fiber of the pigtails. It also has the patching facility to connect the connectorised end of the FC/PC (or any other type) adaptors available on the adaptor mounting plate provided in the patching shelf. The number of splicing and patching shelves depends on the number of fibres in the optical fibre cable. The FDMS modules rack mountable units come with the following components: Splicing Shelf: These are sheet metal shelves mounted on telescopic slides able to s lid e in the front direction more...
We have manufactured and offered a wide range of fibre distribution frames that are known for their superior design. Precision engineered, these products are largely used and demanded by our clients in the telecom industry. Theses frames have high density and high capacity.
Our Power Distribution Units (PDUs) take into account access restrictions and the fact that they generally stand within the computer suite and need to be in keeping with the rest of the equipment. At AMBIT Southern we have long term experience of designing PDUs for use in the banking and financial industry. We offer a full range of PDUs from a simple wall mounting distribution unit through to floor standing units with special instruments and controls. We can supply a Modular or specially fabricated sheet steel construction with an epoxy powder coat finish to clients choice. We offer the following options and facilities: Live maintenance Emergency power off (EPO) Fire alarm interface Fire suppression gas interface Alarms Voltage, frequency and current relays with alarms BMS interface Full range of instruments as required Clean earth Circuits wired to terminals in separate chamber Facilities for thermal imaging False floor mounting boxes with under floor glanding facilities
Category Matches
Related Trade Leads
|
|
We are offering of artificial load bank. Its for battery load bank.
- Charge discharging of load bank. (Sell) |
|
Offering to sell power distribution unit, power distribution boards,
high tension power distribution boards, low tension power distribution
boards,... (Sell) |
Tender Notifications
B2B Newsletter Subscription
