 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Cooling Towers >
Plate Heat Exchangers
Products - 46
|
Plate Heat Exchangers |
Displaying 1-45 of Total 45 Products Found |
Products
We manufactures plate heat exchangers of reliable quality and performance, for use in Dairy, Food and Chemical Process industries.
Application : more...
Our heat exchangers are specially designed for the efficient transfer of heat from one fluid to another fluid over solid surface. These heat exchangers can be used for various industrial purposes, including oil cooling, transmission and engine coolers, boiler coolers, chilled water system, ground water system and many more. These equipment are highly fuel efficient and require very little maintenance saving your considerable time and money.
more...
Plate Heat exchangers with plates of SS 304, SS 316, SS 304L, SS 316L, hastelloy, Inconel, having gaskets of nitrile, viton, EPDM with brazed type, semi-welded, fully welded PHE.We offer high performance plate heat exchanger which is designed to exact requirements. Our plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two liquids. This has a major advantage over a conventional heat exchanger in that the liquids are exposed to a much larger surface area, as the liquids spread out over the plate. This facilitates the transfer of heat, and greatly increases the speed of the temperature change. Our plate heat exchangers are significantly smaller in size, and are a more efficient than their counterparts.
We present highly efficient plate type heat exchanger for our valuable customers as per their demands and specifications. These heat exchangers are scalable solution that offers all benefits of a plate type exchanger but at the same time overcomes the limitation of gasketed models. We have a widest range of different solutions that are available in endless combinations. There is no real limitation of maximum flow of these heat exchangers. Their temperature ranges from 195zero C- + 345zero C and maximum work pressure is 70 bar. and there is no upper limitation as these elements can be connected in parallel within the unit. The connections of these heat exchangers are DN25 to DN300 Weld neck, flange threade or sanitary standard execution.
We are catering a high quality plate heat exchanger which is widely used for different requirements in various industries. These plate heat exchangers are fabricated with the perfect combination of advanced technology like sealing technology and improved plate design. In addition, we are also providing customization in accordance with the specifications of the clients.
Features:
• High heat transfer coefficient
• Optimized heat recovery
• Compact construction
• of plate arrangement
• Easy maintenance
We manufacture plate heat exchanger that are used in dairy, pharma and biotechnology, beverages, brewery, chemical and power sectors.
PHE plates are available in MOC AISI 304, AISI 316, AISI 316L, Titanium, Hast alloy, Monel in range thickness from 0.5mm to 0.9mm. It is suitable for handling fluid from 100 LPH to 3.5 Million LPH.
The plate heat exchanger are available in herring bone, free flow and semi welded construction and depending on application respective plates are selected.
To ensure the innovativeness and
high quality standards of our plate heat exchangers, we use a combination of latest and most efficient technologies such as sealing
technology and improved plate design. Used in diversified industries, our range
of plate heat exchangers has various integrated features of:
more...
We are involved in supplying plate heat exchanger systems that include ammonia compressor, compressor motor, condenser-PHE type, evaporator-PHE type and other essential accessories. These plate heat exchanger systems accessories are manufactured using premium grade raw material. We make sure that our plate heat exchanger (PHE) systems pass through stringent quality checks to give excellent results. To meet the requirements of our clients, our PHE type system is available in customized options. more...
We produce Hydraulic Oil Coolers/Shell & Tube/Plate Heat Exchanger which are packed floating head type in general and are suitable for figment of the return line of a Hydraulic oil system. The hydraulic oil coolers designed by us are used extensively in power packs, presses, dredgers, plastics injection equipment and a number of other hydraulic systems.
Some of the characteristics of Hydraulic Oil Coolers are:
• Suitable for heat transfer fluids, lubricating, transformer & quenching oils
• All Teccon coolers are designed as per IS, DIN or TEMA Standards
• The normal design pressure of these coolers is 10 kg. / cm 2G and are tested for a hydrostatic pressure of 15kg. /cm2G
• These coolers can be designed for high pressure circuit as high as 50-75 kg. / cm 2G more...
The wide spectrum of plate heat exchanger is widely appreciated for high performance, durability and reliability. It mainly uses metal plates for the transference of heat between two liquids. As soon as the liquids spread out over the plate, they are exposed to a much larger surface area. This further supports the transfer of heat and increases the speed of the temperature change. They are widely used in milk, ice cream and butter milk, HTST pasteurizers for milk plants.
Our company brings high quality gasketed plate and frame heat exchanger that fulfills the requirements of various industries. These gasketed plate and frame heat exchangers are available in different plate patterns, various sizes and thermal lengths that make endless combinations. Their connections size varies from 25 mm to 500 mm. Our gasketed plate and frame heat exchangers consists of different plates such as AISI304, AISI316, Titanium, SMo 254, Ti-Pd Hastelloy and other nickel alloys. Furthermore, these involve various gaskets such as nitrile, butly, EPDM, hyplalon, fluoro rubbers (viton.)
We are catering plate and frame heat exchangers which are manufactured with premium quality raw material using most advanced technology. These plate and frame heat exchangers are compact in design and ensure low hold-up volume, expandability and flexibility. Apart from this, we are also providing customized solutions as per the specifications of the clients.
Features:
• Easy installation
• Low maintenance
• Corrosion resistant
The PHE consists of a package with linked up embossed plates with passage openings. Every second plate is staggered by 180°, creating a flow gap at any given time. All plates are provided with tied up or glued gaskets, which completely seal the various flow gaps from the outside and separate the media involved in heat exchange.
The plate package is mounted in a rack and is pressed between fixed plate and pressure plate by means of clamping bolts.Warm and cold media are normally led through the PHE in one-pass or multi-pass counterflows in order to guarantee a maximum heat transfer.
Connections of media involved in heat exchange are on the fixed plate, in case of multi-pass flow also on the pressure plate (see basic scheme below). Features : more...
Our company manufactures welded plate heat exchangers that ensure high performance in various industrial applications. These welded plate heat exchangers are manufactured from dissimilar materials when one side gets exposed to corrosive conditions. There is no real limitation of maximum flow of these heat exchangers. Their temperature ranges from 195 zero C - + 540 zero C and maximum work pressure is 70 bar. The connections of these heat exchangers are DN25 - DN300 Weld neck, flange or threade and there is no upper limitation as these elements can be connected in parallel within the unit.
Plate heat exchanger offered by us is manufactured from qualitative raw material as per the industrial requirements. These plate heat exchanger are corrosion resistant and are easy to install. Our range is durable, dimensionally accurate and is appreciated in the worldwide market. more...
Manufacturing plate heat exchangers in variety is our forte. We cater to beverage & milk processing industries with our range of plate heat exchangers. We offer our clients with compact, modern PHEs that exhibit the highest thermal efficiency. Presently, we are a trusted name for plate heat exchangers, their services, refurbishment, and parts. It is with this experience, as well as cooperation with various partners that led us to the introduction of this remarkable and very competitive product range. Our product range has a wide selection of plates suitable for many different applications from sanitary and sterile applications in food and pharmaceutical processes to heavy industrial applications in petrochemical plants and steel mills.
We are fabricating a wide range of Shell and Tube heat
exchangers that available in single pass, double pass and multi pass in
different ranges from 3/8 OD tubes in SS 304, SA179 and copper in expansion and
welded types. Our range of heat exchangers is supplied to various industries
such as chemical, gas, food and film processing and others.
Features:
more...
Our company is manufacturing plate heat exchanger in brazed design mainly serving to the varied need of industrial applications. The exchanger is available in two forms that is heat transfer plates and turbo plates.
Following are both described plates:
• GPL
These are the heat transfer plates with V – corrugation mainly serving to the needs of heating, air-conditioning, motor cooling, heat recovery and globally to be used with different media.
Following are some of its technical specifications:
Technical Data:
heat exchange surface per plate: 0,0129 - 0,29 m²
max. operating pressure: 30bar
max. operating temperature: -100°C...+200°C
Material:
plates: 1.4401 / AISI 316
solder: copper 99,9%
• TPL:
The TPL are the turbo-plates in the flow gap used for the requirements of plant and mechanical engineering (f. inst. engine/ motor oil cooling). Even the small sizes more...
We offer a wide assortment of precision plate heat exchangers which find their applications in heating or chilling of various liquid products such as milk, beverage and others. These plate heat exchangers are made up of premium grade stainless steel sourced from certified vendors that makes them free from rust and hygienic, maintaining standards food grade. Our assortment is available in the capacity ranging from 500 LPH to 5000 LPH.
We are a trusted name in manufacturing a vast range of plate heat exchangers that are offered at industry leading prices. These are extensively used for cooling and heating of various liquids. It has a capacity from 500 LPH to 200000 LPH for milk beverage and other food and chemical products for instant chilling and heating.
Along with our plate heat exchangers, frames and pressure plates are available in carbon steel and CS cladded with stainless steel. The plates are available in SS 304 / SS 316 / SS 316 L / Titanium. Following are some of the essentials of our products: more...
We manufacture plate heat exchangers to meet the diversified requirements of assortment of industries. Our set of plate heat exchangers are manufactured from the amalgamation of superior technology like sealing technology and improved plate design. Our assortment of plate heat exchangers insure features like: more...
This plate heat exchanger is formed up by a set of corrugated metal plates.The plates have four holes in the comers for the two kinds of heat exchanging liquid to pass through. And the plates are mounted in a frame with a Fixed plate on one side and a movable pressure plate and pressed together with tightening bolts. On the plates are fitted with sealing gaskets which seal off the channels of the fluids so that the fluids alternately flow to their respective channels to achieve heat exchanging. The flow rate of the fluids, their physical property, pressure drop and temperature difference determine the number of plates and their sizes. The corrugated plates serve not only to raise the level of turbulence, but aslo provide numerous supporting points to withstand the pressure difference between the media. Metal plates and the movable pressure plate are secured in the supporting colurpn. The plate heat exchangers are widely acclaimed in various industries for its high performance, economy more...
more...
Our Plate Heat Exchangers are widely used for heating and cooling, recovery of heat, pasteurization & sterilization in industries. Following are the industries where our product is used with their respective areas: more...
We are involved in manufacturing a superior range of plate heat exchanger and chilling plants. These plants are a perfect combination of latest technology and improved plate designs. Our entire range of exchangers is manufactured using high grade raw material and used in the filtration stages of Aquatek RO System
Key features:
more...
Our Plate Heat Exchangers are widely used for heating and cooling, recovery of heat, pasteurization & sterilization in industries. Following are the industries where our product is used with their respective areas: Dairy industry: Heating & cooling of milk, yogurt, and for pasteurization. Beverage industry: Heating & cooling of juices, wart, beer, wine, soft drinks, syrups etc Vegetable Oil industry: Heating and cooling of vegetable oils. Sugar Industry: Heating and cooling of Cane juice. Pharmaceuticals: Cooling of Re circulatory De mineralized water
Tailor made equipments built to your specifications under various codes and also under different third party inspection agencies wherever applicable. Mechanical seal parameters suitable for shaft ensured with repeatability, hence we enjoy harmonious relationship with various seal suppliers and a happy clientele. GMP models are also being fabricated with complete paper work.
more...
Heat exchanger is used to transfer heat from one medium to another. There are six different types of heat exchangers used in different industries. Those are: more...
We offer to our clients a wide range of heat exchanger, which are designed for establishing equilibrium with their surrounding. Our range of stainless steel heat exchanger are available in plate & tube types & delivering dry & clean air needed for pneumatic instrumentation for critical applications.
The automatic timer fitted in our driers help in diverting incoming air to another tower, with one tower engaged in drying the air and the other tower working towards regenerating the desiccants.
Further the purged air helps in removing the absorbed moisture from the absorbent desiccant. With ready availability of spares for meeting customer's break down problem, we offer them in capacities ranging from 5CFM to 5000 CFM. more...
We have also specialized in manufacturing heat exchanger, which is used as a device built for efficient heat transfer from one fluid to another, and is not affected whether the liquids are separated by a sold wall to avoid their mixing. That is heat is transferred without any direct contact. They are widely used in petroleum refineries, chemical plants, petrochemical plants, natural gas processing, refrigeration, power plants, air conditioning and space heating. various types of heat exchangers. Our range of heat exchangers include
• Shell and Tube heat exchanger
• Plate heat exchanger
• Regenerative heat exchanger
• Adiabatic Wheel heat exchanger
• Fluid heat exchangers
• Dynamic Scraped surface heat exchanger
A plate type heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. This facilitates the transfer of heat, and greatly increases the speed of the temperature change. It is not as common to see plate heat exchangers because they need well-sealed gaskets to prevent the fluids from escaping, although modern manufacturing processes have made them feasible.
The concept behind a heat exchanger is the use of pipes or other containment vessels to heat or cool one fluid by transferring heat between it and another fluid. In most cases, the exchanger consists of a coiled pipe containing one fluid that passes through a chamber containing another fluid. The walls of the pipe are usually made of metal, or another substance with a high thermal conductivity, to facilitate more...
These exchangers work on three flow with connections on the fixed plate and on the pressure plate. Our exchangers consist of a package with embossed plates with their respective passage openings. In this, every second plate is staggered by 180°, making a flow gap at any given time. The plates have glued gaskets which completely seal the various flow gaps from the outside and separate the media involved in heat exchange. Its plate package is mounted in a rack and is pressed between fixed plate and pressure plate with the help of clamping bolts.
Our vast range of PHE double stage (pasteurizer plate pack) is extensively used in various applications of beverage, dairy, ice cream, edible oil, brewery, winery, chemical and pharmaceutical industry. We are manufacturing these plate packs in various capacity ranging from 500 LPH to 30,000 LHP which can provided with customization as per the specifications and requirements of clients. Not only this, we have provided our range of PHE with a self-supporting frame even.
The frame and pressure plate can be either power coated, painted or provided with stainless steel cladding in accordance with the specifications of clients.
So as to provide uniform pressure on each heat transfer plates, our range of PHE has been provided with multi bolt tightening design. As it has the easily changeable plate arrangement, so it facilitates various processing conditions. Adding to this, the flanges are manufactured as per the SMS, IDF and DIN standards and plates are made from AISI-304/316 more...
Plate & Frame Heat Exchangers more...
Plate heat exchanger that we manufacture has the following features: more...
The plate heat exchanger made by us are also superior in quality and made using variety of raw materials. This plate heat exchanger is corrosion resistant and can easily be installed anywhere. The plate heat exchanger made by us are designed with excellence and are cost effective.
We are manufacturing our heat exchangers for varied applications in the industry like fertilizers, chemicals & petrochemicals, automobiles, cement. We offer 3 basic types of heat exchangers that is fixed tube removable bundle & U-tube. We provide well-conceived & optimum designs to suit O.E. uses. The heat exchangers have heat transfer capacity ranging from 1000 k.cal/hr to 10,00,000-k.cal/hr and heat transfer area from 1m² to 500m² with MS, SS, brass, cupronickel and copper.
Further, our heat exchangers are designed and constructed as per IS, DIN or TEMA standards. Our product range includes with their respective specifications:
Inter Coolers & After Coolers:
These inter coolers and after coolers are used to take out moisture out of air which poses problems to the end user. They are designed effectively to remove the moisture present in the compressed air. They conform to IS, TEAM & DIN standards.
DX-Chillers & W/C-Condensers Air-conditioning & more...
We specialize in procuring and supplying a complete range of plate type heat exchangers to our global clients, of a well-known name in the engineering industry that is API.
These heat exchangers are designed from high performance stainless steel plates and are carefully copper brazed in order to make them deliver an unmatched performance and cost effectiveness. API possesses an in-depth industry expertise in designing and manufacturing these plate type heat exchangers. The low weight, insulated, compact, corrosion resistant, high performance and maintenance free heat exchangers are helium leak tested at various stages of production to assure better performance.
These are being widely used in many industrial applications of heat exchanging. We supply these heat exchangers in various sizes and universal design standards to make them installable in any country in the world. more...
We bring paramount quality heat exchangers – ME 18 which are perfectly engineered for efficient heat transfer from one fluid to another and are widely used in engineering processes. It works on the first law of thermodynamics. The technical details are:
Heavy Gauge 0.8 MM, SS316/SS304 more...
Plate heat exchangers provide compact design for greater efficiency, low hold-up volume, easy maintenance, expandability and flexibility and close temperature approaches. Studded connections are standard for ports of 4" or more in diameter. Threaded pipe is used for connections of less than 4". All our frames are primed and finished with two coats of durable epoxy enamel to keep our units looking new longer.
A range of different solutions is available, providing endless possibilities.
Advantages
more...
Our plate heat exchanger consists of a series of thin, corrugated plates that are gasketed, welded together (or any combination of these) or brazed together depending on application. The plates are then compressed together in a rigid frame to create an arrangement of parallel flow channels. One fluid travels in the odd numbered channels, the other in the even. We are manufacturing the Plate Heat exchangers as per as High standards and customer specification.
Heat exchanger is used to transfer heat from one medium to another. There are six different types of heat exchangers used in different industries. Those are:
more...
We offer engineered to perfection heat exchanger- ME 12 in which energy is transferred from one fluid to another across a solid surface. The analysis of exchanger analysis and its design therefore, consists both convection and conduction. Its technical specifications are:
Heavy Gauge 0.6 MM, S316 / SS304 more...
We offer high performance plate heat exchanger which is designed to exact requirements. Our plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two liquids. This has a major advantage over a conventional heat exchanger in that the liquids are exposed to a much larger surface area, as the liquids spread out over the plate. This facilitates the transfer of heat, and greatly increases the speed of the temperature change. Our plate heat exchangers are significantly smaller in size, and are a more efficient than their counterparts.
Category Matches
Related Trade Leads
|
We are offering superior range of plate heat exchanger with the
following features:
- Highly durable and reliable
- New and innovative designs
... (Sell) |
|
We are offering excellent range of plate heat exchangers with the
following features:
- Made up of quality materials
- Corrosion resistant
- E... (Sell) |
|
We are offering wide range of plate heat exchanger and chilling plant
with the following features like:
- Easy installation
- Available in vari... (Sell) |
|
|
We deal in plate type heat exchanger plates of alfa- laval, sondex,
varitherm, de-laval, tranter, apv, schimdt-bretten, vicarb, gea.
Various mode... (Sell) |
|
|
We offer to sell plate heat exchangers, detachable heat exchangers,
gasketed plate heat exchangers and corrugated metal plate heat
exchangers. (Sell) |
Tender Notifications
B2B Newsletter Subscription
