 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Automobile > Piston & Crankshaft Assemblies >
Piston Valve
Products - 20
|
Piston Valve |
Displaying 1-21 of Total 21 Products Found |
Products
We manufacture angle valve which has a unique modular design which makes flow restriction to least and thus our valves gives highest Kv values compare any competitor existing in the market. These valves are used for various industrial and pharmaceutical applications and are available in different sizes varying from Size ½ inch to 2 inch. It is manufactured using high grade low carbon SS316L, making it highly corrosive resistant. Further, we provide Namur mountings on the operator as an option which allows solenoid valve to mount directly on to the operator. It also has following features:
• Made of all wetted parts SS 316L
• Wide range of operators from ø 40 mm to ø 110 mm
• Higher Cv Value compare to other competitors.
• Unique Shavron Rings makes the fiction minimum and thus longer life to more...
Its piston based design eliminates seat leakages. Its seatless seal helps in eradicating machining and lapping of seats. Its bubble tight seal is fabricated by precision ground cylindrical stainless steel piston. Features: more...
Catering to the needs of various industries, we supply a qualitative range of stainless steel pneumatic piston valves. These pneumatic piston valves are widely appreciated by our clients for accurate size and thermal stability. Sturdily constructed, these valves are high performing and offer better durability. Further, these are available at industry leading prices. more...
Application:
VHT Blowdown valves used to relief pressure from the separator of compressor, when it is switched off.
Operation:
The blowdown valves provides two functions:
1. At start up the valve close to permit the are –oil separator pressure to build up.
2. At shut-down, when a pressure is applied the valve opens to bleed the air –oil oil separator to atmosphere. The blow down valve may be used as a by-pass valve to bleed air though the compressor at start-up.
Application:
VHT Blowdown valves used to relief pressure from the separator of compressor , when it is switched off.
Operation:
The blowdown valves provides two functions:
1. At start up the valve close to permit the are –oil separator pressure to build up.
2. At shut-down, when a pressure is applied the valve opens to bleed the air –oil oil separator to atmosphere. The blow down valve may be used as a by-pass valve to bleed air though the compressor at start-up.
Design Features:
1. TEF seats for long seal life
2. Viton “O rings for lubricant compatibility.
3. Sizes – ½ , ¾ to 2NPT & BSP.
We supply poiston valve. The features of piston valve are as under :
FEATURES
more...
These compact on/off valves provide tight shut-off by utilizing a PTFE plug seal. Valve stem Sealing is achieved through self-aligning PTFE chevrons to maximize sealing integrity. With these valveensure leakproof isolation up to the range of * classVI. (*ANSI). The valves can be used on a wide range of media including steam, air oil and other fluids, and can operate at a maximum temperature of 180º C and pressure ratings up to 16 barg.
MOC - SS AISI 316L Sizes - 15 to 50 NB Ends - Scr. / Butt / SW / TC / Flgd # 150 Max. Design Temp. - 180º C MOP on Sat dsteam - 9 Kg/cm²(g) MOP 40 & 50 NB - 16 Kg/cm²(g) MOP 15-25 NB more...
These piston valves are used in processing industries for steam, air or other fluids. Suitable for operation for simple on and off duty using solenoid valve.
more...
We are one of the leading manufacturers of a wide range of Piston Valve. These piston valves are seat-less and glandless as well as are available up to the size 6. Moreover, these valves do not have any stuffing box, but do have a highly efficient piston operation system. The piston slides between the two packing rings that are made of asbestos PTFE. The bottom ring of the valve rests on a cast machined groove of the body and upper packing ring is being held and remained pressed by a bonnet on top. The main advantage of the Piston Valve offered by us is when any leakage is observed from the hole of the bonnet, it can be stopped on the line immediately. This is achieved by tightening the nut of the bonnet evenly, keeping the valve in closed position. APPLICATION: more...
Piston valve is a Seatless & Glandless valve . Piston valve valve up to the size 6" do not have any stuffing box. The salient feature of this valve is that of the piston operation. The piston slides between the two packing rings made from specially imported material and do not rotate, hence there is minimum ware. The only warring part is the packing ring and that to after an extensive use. The two packing rings are separated by a ported lantern bush. The bottom ring rests on a cast machined groove of the body and upper packing ring is being held and remained pressed by a bonnet on top. The bonnet rests on the top ring, when tightened evenly by the nut of the stud presses the lantern bush which in turn presses the bottom ring. This is done by keeping the valve in closed position. Thus the mechanism is aligned compressed and ready for operation. Here the bottom ring of the valve serves the purpose of the seat while the upper ring serves the purpose of a gland. The advantage of the more...
Piston Valves
• Piston type globe valve in cast steel , stainless steel & forged steel material. • Flanged end to class 150, 300, &DIN Std., screwed end and socket weld . • Size: 15mm to 200mm IBR & Non IBR. • Application: Steam , thermic fluid, hydrogen gas, vacuum, acids, chemicals & refrigerants. • Special Features: Seatlesss & glandless valve, zero leak, maintenance free, Energy saving & have no metal to metal contact.
We offering piston valves. The valve up to the size 6" do not have any stuffing box. The salient feature of this valve is that of the piston operation. The piston slides between the two packing rings made of asbestos / PTFE and do not rotate, hence there is minimum ware. The only warring part is the packing ring and that to after an extensive use. The two packing rings are separated by a ported lantern bush. The bottom ring rests on a cast machined groove of the body and upper packing ring is being held and remained pressed by a bonnet on top. The bonnet rests on the top ring, when tightened evenly by the nut of the stud presses the lantern bush which in turn presses the bottom ring. This is done by keeping the valve in closed position. Thus the mechanism is aligned compressed and ready for operation. Here the bottom ring of the valve serves the purpose of the seat while the upper ring serves the purpose of a gland. The advantage of the valve is when any leakage is observed from the more...
We supply Forbes Marshall products for various purposes. Our range includes more...
It can be used in Steam and hot oil application. Piston valves have a no seat and Gland. It is 100 % leaktight to atmosphere.
Features:
more...
Brief Write-up on It is a Seatless & Glandless valve The valve up to the size 6” does not have any stuffing box. The salient feature of this valve is that of the piston operation. The piston slides between the two packing rings made of asbestos PTFE and does not rotate; hence there is minimum ware. The only warring part is the packing ring and that to after an extensive use. A ported lantern bush separates the two packing rings. The bottom ring rests on a cast machined groove of the body and upper packing ring is being held and remained pressed by a bonnet on top. The bonnet rests on the top ring, when tightened evenly by the nut of the stud presses the lantern bush, which in turn presses the bottom ring. This is done by keeping the valve in closed position. Thus the mechanism is aligned compressed and ready for operation. Here the bottom ring of the valve serves the purpose of the seat while the upper ring serves the purpose of a gland. The advantage of the valve is more...
Swing Check Valve
(ASME 150 / ASME 300 CLASS)
Applicable Standards
Materials : Carbon Steel / Alloy Steel / Stainless Steel / Alloy-20 / Monel Hastelloy-B&C
Mfg. Std : BS 1863
Face to Face : ASME B 16.10
Testing Std. : BS 6755 / API 598
Hydraulic Test Pressure
more...
5/2 And 5/3 Piston Valves
ZNCN / 562, ZNCN / 564 more...
Piston valve is a Seatless & Glandless valve . Piston valve valve up to the size 6" do not have any stuffing box. The salient feature of this valve is that of the piston operation. The piston slides between the two packing rings made from specially imported material and do not rotate, hence there is minimum ware. The only warring part is the packing ring and that to after an extensive use. The two packing rings are separated by a ported lantern bush. The bottom ring rests on a cast machined groove of the body and upper packing ring is being held and remained pressed by a bonnet on top. The bonnet rests on the top ring, when tightened evenly by the nut of the stud presses the lantern bush which in turn presses the bottom ring. This is done by keeping the valve in closed position. Thus the mechanism is aligned compressed and ready for operation. Here the bottom ring of the valve serves the purpose of the seat while the upper ring serves the purpose of a gland. The advantage of the more...
"ME" Piston valves made from Cast steel material with ss-304 or ss-316 internal material fitted with non-asbestos ring. It can be used in steam and hot oil application more...
Category Matches
Related Trade Leads
|
|
We offer to sell piston valves, metal piston valves, gland-less piston
valves and seat-less piston valves. (Sell) |
|
|
Offering piston valves:
- It is a Seat less & G landless valve:
- The valve up to the size 6 does not have any stuffing box.
The salient ... (Sell) |
|
We are manufacturer and supplier of piston valve, diaphragm control
valves, hand control valve, pressure reducing valve, dual brake valve,
quick re... (Sell) |
Tender Notifications
