Products Directory > Industrial Supplies > Filters & Accessories >
Oil Strainer
![]()
Products - 6
|
Oil Strainer |
Displaying 1-6 of Total 6 Products Found |
-
Products
- Description
- Supplier Information

We design and manufacture an assortment of strainers to meet machinery requirements across the industries. These are also available in customized form. We entertain our clients by listening to even their minute specifications. Strainers are generally needed in machinery based on heating & cooling system and pipelines that carry water or other liquids of differential nature.
![]()

Hydraulic Filters :
Suction Strainer
Return Line Filter
High Pressure Filter
Retrofit Equivalent to :
Pall hydac, inter norman & many more
more...
![]()

Water Well screens are manufactured with V-shaped profile wire which is spirally wound around a cage of longitudinal support rods. Each intersecting point of these wire is fusion welded. The pitch of winding gives different spacing between two adjacent turns of wire. This spacing gives passage for water to enter. The entire process is completed on fully computerized machines. more...
- VMT Fibreglass Industries Pvt Ltd.
![]()

Our SS Perforated Strainers are suitable for all type of submersible pumps. We have perforation capacity from 0.35 mm to 2.00 mm thickness of SS Sheets with perforations in round and capsule designs. If the customers demand we provide them complete component which is accurately formed, bend and spot-welded, to fit into pump assembly straight away. SS Grades 202 or 304 are used as per customer's requirement. SS Grades are guaranteed to match the order.
- Libra Components Private Limited
![]()

We offer high quality suction strainers, which are designed for installation into suction lines of pumps. The suction strainer elements can also be supplied with a bypass valve to reduce high pressure drops caused by contaminated elements or high viscosity fluids during cold starting. These are sized for clean element pressure drops off no higher than 0.5-.07 psi.
The standard model in our range has nominal filtration ratings of 74 or 125 microns. The bypass valve opens at 3 psi.
Specifications:
Reusable SS 100 mesh / 149 micron std
Steel cap / support tube
Aluminum die cast nut
Maximum working temp. 80 °C
Suitable for hydraulic/mineral oil
Continuous epoxy bond- AMCO Engineering Works
![]()

We are one stop shop for providing all kinds of hydraulic accessories such as pressure switch, Hydroline make Filters, suction strainers. Even the oil level indicators are available from our end.
- Slimline Hydrotek
![]()


