Products Directory > Industrial Supplies > Filters & Accessories >
Oil Skimmers
![]()
Products - 27
|
Oil Skimmers |
Displaying 1-27 of Total 27 Products Found |
-
Products
- Description
- Supplier Information

Our company manufacture belt type oil skimmers to filter out the un-emulsified oil from the coolant tank. To facilitate its working mechanism an endless belt is dipped in coolant tank such that the oil collected on the top . Coolant flows slowly over the belt leaving the oil on the belt which is continuously rotating to take out oil. The coolant carried over is again transported back to the coolant tank.
Salient Features: more...
![]()

We are a top-notch manufacturer of oil skimmers, which are available in the following types:Weir Type Oil Skimmer:Our weir type oil skimmers are floating oil skimmers, which uses adjustable skimming weir for removing oil floating on water. These skimmers are ideally used for removing large volumes of oil, especially when the thickness of oil film floating on water is high. Fitted with non clogging hydraulic driven pumps, mounted below the skimming weir, our hydraulic power packs are used for driving pump. Further, lowering or raising, the skimming weir is offered with the skimmers. The hydraulic power packs run on either electrical motor or Diesel engine.Capacities available: 5 m3 / hr to 100 m3 /hr.Rotating Disc Skimmer:Our rotating skimmers are used for removing thin layers of oil floating on water. Equipped with multiple banks of thin stainless steel disc mounted on the common shaft, which rotates at slow more...
![]()

These oil skimmers have been primarily developed for automobile ancillaries for separation of oil from degreasing tanks and also for separation of free floating oil from coolants used in CNC Machines.
![]()

We are manufacturing different types of oil skimmers used for different applications. Following are the types of we are presenting:
Belt Type Oil Skimmer
We are offering belt type oil skimmer which are used where recovery of fluid is important. This is mounted vertically in the tank and the belt is running vertically between two shafts. The oil sticks to the belt & is scraped out when it comes above the tank.
Tube Type Oil Skimmer
Our tube type oil skimmers are used to remove oil from big tanks. In it the tube floats on the surface of the fluid & oil sticks to the tube and the tube rotates continuously with the help of geared drive. The oil is continuously scraped out.
Hydro Cyclone Type Oil Skimmers
The hydro cyclone type oil skimmer is a kind of pump. It efficiently handles very high volumes of oil.Some fluid goes out along with the scum.
Pan Type Oil Skimmers
Our pan type oil skimmer is a kind of bucket elevator. The buckets are tied more...
![]()

Highlights of Oil Skimmers more...
![]()

We manufacture drum type skimmers that are motor driven (by air or hydraulics) and turn slowly attracting the oil to its surface and rotating around to the wiper blade which scrapes the floating oil off and it runs into the sump area, where it is picked up by pump suction and transferred to storage.
These drum skimmers are the most efficient and the most selective floating skimmers available anywhere, due to the large surface area that is exposed to the floating oil. They are easy to install and operate.
![]()

To reduce machining temperature in the metal working industries several water-based emulsions are used as coolants. These coolants are made by mixing water and different cutting oils in a specific ratio. Oils used with these machines for lubricating them get mixed with lubricants quite often. When this happens, the efficiency of the coolant automatically decreases since its properties get changed. The oil mixed with coolant has a tendency to float on the tank surface. This leads to the generation of various kinds of fungus, which produce a very foul smell around the tank.
For a solution to these problems, we at Span Filtermist India Pvt. Ltd, have manufactured ENDLESS BELT TYPE OIL SKIMMERS. These special kind of Skimmers consist geared motors that continuously rotate a belt made of special material allowing oil particles to stick to themselves. A special oil scrapper then scrapes these oil particles and a separate Oil collecting bin collects them in itself. Our Oil Skimmers are more...
![]()

We manufacture floating suction skimmers which are designed for each specific tank. They are maintenance free and can be fitted on tanks with minimum modifications. They can be fitted in conventional fixed roof storage tanks, external floating roof tanks and internal floating roof tanks. They are durable as well as robust in design and also cost effective.
![]()

We offer to our clients advanced technology incorporated floating type oil skimmers that are known for their superior performance and longer durability periods. Our expertise and in depth knowledge on the subject allows us to manufacture them with a user friendly operating console having features like:
On/ Off Switch, Speed Control, Forward/ Reverse Operation.
Overload Protection/ Cable Length 1.5 Mtr (From Main Power Supply To Control Panel Of Skimmer)
Cable Length 10 Mtrs (From Control Panel Of Skimmer To Oil Skimmer)
Specifications :-
Height : 410mm. Approx.
Width : 480mm. Approx.
Length : 800mm. Approx.
AREA : Safe
TYPE : Standard Floating Disc Oil Skimmer
CAPACITY: 75 Lph ( At 10mm. Layer Of Oil In Continuous Flow )
M.O.C. OF MODULE : Stainless Steel ( S.S.304 )
NO. OF DISC : 5 Nos.
M.O.C. OF DISC : Oleophilic
DISC DIA. : 280mm.
INPUT SUPPLY : 230v, Ac, Single Phase
PRIME MOVER : 24 V, Dc; Non Flp. Electric Geared more...
![]()

SPECIFICATION FOR KATCHOIL TUBE OIL SKIMMER
MODEL : T 25
TYPE : Floating Tube Endless Type With
Cantilever Boom Arrangement
MOUNTING : Cantilever Type Extended Swivel
Arm
CAPACITY- LPH : 50- 100 Lph Depending Upon The Thickness Of Free Floating Oil & Viscosity Of The Oil In The Effluent
TYPE OF OPERATION : Continuous
FLUID TO BE SKIMMED : Oil And Grease
TEMPERATURE : 60
TUBE LENGTH, MTR. : 46 Mtr. Endless / 20 Mtr. Endless
TUBE SPEED M/MIN : One Rpm
DIRECTION OF ROTATION : Clockwise
FRAME M.O.C. : M.S.E.P. / Ss 304
TUBE : Special Polymer With Diameter Of 25 Mm And Thickness Of 3 Mm
SHAFT : Stainless Steel
WIPER : Teflon
ACCESSORIES : Outlet Hose (5 Mtr Long.)For Oil Transfer To Collecting Drum Shall Be Provided Along With The Equipment. Drum Shall Be In Your Scope
ELECTRIC DRIVE : 1 Hp Foot Mounted Ac Electric Motor (415 V, 3 Phase, 50 Hz) With Suitable Worm Reduction Gear Box (Make: Bonfiglioli)
AREA OF
![]()

We manufacture oil skimmers which are compact and also occupies less space. These oil skimmers also have auto belt tensioning. They have excellent tensioning efficiency and are suitable for viscous oil. They run on one drive and are also economic and cost effective. They are used for taking out of Un-emulsified oil from coolant.
Working
An endless belt is dipped in coolant tank such that the oil on the top collected. Coolant flows slowly over the belt leaving the oil on the pelt. The belt is rotating to take out oil. The coolant carry over is again transported back the coolant tank.
![]()

TYPE : Funnel
MODEL : F-500
CAPACITY : 225 LPH At 10 Mm Continuous Layer Of Free Floating Oil
RUN OFF ASSEMBLY : SS-304 /SS 316
M.O.C. OF FLOATS : SS-304 /SS 316
M.O.C. OF FUNNEL : As Per AISI (S.S. 316)
M.O.C. OF HOSE : S.S. 304 / 316 Braided Flexible Hose 11.8 Meter
OUTLET CONNECTION :
1 1/2 Bsp Threaded Connection, Suitable For 38mm. (I.D.) S.S.Hose With S.S. Nipple Connection.
Suitable End Flange Connection For
50nb Oil Outlet.(Asa # 150, Ansi B16.5)
![]()

We design tube type oil skimmers where the tube floats on the surface of water and is driven in a continuous loop by the skimmer. Oils, fats, and grease cling to the outside surface of the tube and are drawn into the skimmer. The material drawn into the skimmer is scraped off by abrasive resistant and flows into a sludge pan with drain coupling. The clean tube is then driven back to the surface of the water by the skimmer to remove more material.
![]()

We manufacture oil skimmers which works as an oil water separator and removes waste oil. These oil skimmers can be positioned at site for easy and efficient waste oil recovery. A wind-up reel on the back of the trailer permits the unit to be plugged in if power is available at the site or an optional generator pack can be provided.
![]()

Our range of katchoil belt oil skimmers are built using advanced technology and quality materials that assures our clients of our products long life standards, low maintenance cots and high performance levels. Further our range of oil skimmers are manufactured to efficiently handle high temperatures, aggressive ph ranges and extreme weather conditions.
Specifications: more...
![]()

Oil Skimmer Belt Type / Disk Type are specially designed and manufactured to meet the requirements of modern industry. These will secure and quite cables and hoses of all types of movable equipment where power is needed. They are particularly suitable for carriages on machine tools, overhead cranes, welding machines, rolling mills, atomic power plants and numerous other applications. The new design offers robust construction, high load capacity, long life and easy installation as it's key features.
Type: Belt Type and Disk Type more...- J. V. Engineering & Conveyors Private Limited
![]()

We are engaged in the manufacturing of qualitative oil skimmers. These skimmers are a cost effective way to remove unwanted oils from coolants and parts washers. Our model removes up to 3-4 lit of oil per hour. These skimmers are very compact in structure and thus can be used at any place where a flat surface is available for mounting. Some of the features include: more...
- Envicare Systems & Services
![]()

Backed by our sophisticated production facility we offer optimum quality steel belt oil skimmers. Our oil skimmers use steel slat of 2.5 mm thickness which is suitable for applications such as coolant degreasing tank, machine tool, washing machine etc capable of working at high liquid temperatures like 100 degree centigrade and in harsh chemicals. The high shelf life belt and is available in various forms. We offer oil skimmers suitable for different tanks which are hydraulic trolley loaded belt type portable model with adjustable depth. more...
- Premier Enterprises, Pune
![]()

We have advanced technologies for skimming floating oils, fuels, fats and grease from the surface of water. All of our oil skimmers are well proven and are also used for skimming floating ash, plastic, scum, floc, duck weed, algae and water meal from water impoundments. Our oil skimmers are highly durable and can easily be installed anywhere.
This product use in these industries-
Pharmaceutical/Bulk drug R & D centre, and chemical industries
Plastic, engineering and automobile Industries
Food, dairy, veg oil refinery industries
Steel and foundry industries
Resort, Hotel and hospital industries Industries- Neel Aquachem
![]()

We have imported oil skimmers which is very effective and efficient in its specific applications in various water treatment systems. These oil skimmers prevent any kind of water from being polluted in a host of sectors, industries and applications. There are various qualitative features of our oil skimmers as follows: more...
- Aquachem Systems (India)
![]()

We offer a wide range of oil skimmers for machine tool, heat treatment etc. These can be made as per clients requirements. We can also supply these with metal chains and metal belt. The oil removal rate of our product is 2LP m/minute to 10LPM but higher removal rates can also be made available as per the specific requirements of our customers.
- Apna Engineers
![]()

We offer a wide range of oil skimmers, which are extensively used in various industry applications. These are as follows:
Applications more...- Universal Engineers, Pune
![]()

Our oil skimmers are automatic and versatile offering complete solutions to the clients. These skimmers are maintenance free and have the ability to run for 24 hours a day. The design that our designers have developed is very simple and prevents clogging. Our oil skimmers vary and depend on the viscosity of oil and can collect up to 100 to 600 litres per day.
Principle
The Oil Skimmer works according to the principle of adhesion. The oil sticks to the smooth outer surfaces of the tube. The water stays back. The constantly rotating tubes pull the oil, which is like a film, of the water surface and transports it to outside of the tube surfaces. With collecting channels, the stripped off oil is lead to a pre collection tank at the rear of the skimmer and from there by a non-emulsifying pump to the main collection tank. This tank usually stands outside the separating basin or tank.
Advantage
Due the collection of the oil from the surface of the water, the more...- Clear Ion Experts Private Limited
![]()

Our precision engineered oil skimmers help in improving the quality of discharge, run-off and closed-loop process water systems by reducing the amount of free-floating oil, grease, animal fat and other contaminants.Some of the advantages of our oil skimmers include the following: more...
- Premier Enterprises, Pune
![]()

We manufacture and provide belt type oil skimmers using qualitative raw material such as SS steel belt of 0.12 MM thickness (similar to that of Abanaki, US). Our model is efficient in functions and the replaceable belt cost little to the user. Our belt type oil skimmers are based on stand mechanism to lift the oil up from underground tanks of ETP. It is also used for other applications such as collecting oil directory into 200 liters. We also import oleophelic polyurethane high efficiency belts. Specifics about the products: more...
- Premier Enterprises, Pune
![]()

Our tube type oil skimmers are available with collector tube and angle frame mount. Our tube type oil skimmer is designed to remove free oils from the surface of water in a sump. Our tube type oil skimmer functions in the following way: more...
- Premier Enterprises, Pune
![]()

Our disc type oil skimmers is equipped with steel discs is available in two models with disc diameter 420 mm & 130 mm depth and 320mm X 80mm respectively. The split type oil skimmer uses discs (with 420 mm dia and 230 mm depth) with chain drive mechanism to split the disc from motor center and to shift the disc downwards to get more depth. Our small belt type models with built-in decanter tray arrangement separates oil from impurities such as collected skimmed oil and water/coolant mixture and washing liquid. Impurities are sent back to the coolant or the tank, and thereby only pure oil is collected. more...
- Premier Enterprises, Pune
![]()
