 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Plant & Machinery > Oxygen & Nitrogen Gas Plants >
Natural Gas Plants
Products - 33
|
Natural Gas Plants |
Displaying 1-31 of Total 31 Products Found |
Products
We take this opportunity to introduce ourselves as one of the leading manufacturers in the world for Boschi Italy brand oxygen/nitrogen plants. Please note, our products are ‘Boschi’ Italian brand and CE approved with ISO 9001:2000 certified and are only being assembled in India for the convenience of better pricing and higher production levels.Our complete technology, designs and manufacturing skills have been acquired from ING L&A BOSCHI, ITALY and perfected in the last 23 years. Dr. Boschi has certified our plants to meet international specifications and we are certified ISO 9001:2000 Company and selling under the same world re known ‘Boschi’ Italy brand name. We can supply you Oxygen /Nitrogen Plant from 15 cum/hr. to 500 cum/hr. and ACETYLENE plant from 25 cum/hr. to 100cum/hr. We would like to introduce ourselves as a leading manufacturer and exporter of OXYGEN/ NITROGEN and ACETYLENE PLANTS & we have manufactured over 300 AIR SEPARATION PLANTS & EQUIPMENTS more...
Air Compressor, compresses the atmospheric air to a pressure of 7.0 kg/cm2g and cools to ambient temperature in a shell and tube type heat exchanger. Automatic drain valve (ADV) of Air receiver automatically releases the condensed moisture. The compressed air at ambient temperature passes through special grade of Carbon Molecular Sieves and PSA module packed with activated alumina. The production of Oxygen/Nitrogen is majorly depends upon the Kinetic Separation technique. Oxygen due to smaller in size (kinetic diameter 3.46 A0) diffuses much faster than Nitrogen (kinetic diameter 3.64 A0) and therefore gets adsorbed in carbon molecular sieves while Nitrogen is collected as the high-pressure product.
The entire operation is fully automatic and controlled by a combination of sequence programmer and quick change over valves. Nitrogen gas of desired purity at 5.0 kg/cm2g pressure and having a Dew Point of (-) 40 degree Celsius is produced by the PSA Unit, now flows to a surge vessel to more...
Our Universal Boschi cryogenic liquid nitrogen/oxygen plants are offered in size from 50 m³/hr (70 liter/hour) to 500 cum/hr (700 liters/hour) capacity. These are safe and efficient to operate and the oxygen confirms to North American and European Pharma copia and standards. The output of liquid oxygen can be stored in a liquid oxygen tank. Liquid nitrogen is available as a by product simultaneously up to 99.999% (PPM GRADE) purity. On being versatile, all the possible product variants are available, one can either take 100% liquid oxygen out put or 50% liquid oxygen output directly into cylinders or 50% liquid oxygen and 50% liquid nitrogen. Following are the parts we are offering and further the manufacturing process: more...
Available with us are Natural Gas Plant that are meticulously designed and precision engineered. Offered in customized designs and specifications, these are in high demand worldwide providing maximum functionality. Our qualitative array comprises of the following essential attributes: more...
S.S. Foundry designs and supplies complete hydrogen gas plants with cylinder filling facilities. On small scale, hydrogen is primarily produced from electrolysis of water in either Knowel’s type mono polar cells or filter press type bi-polar cells known as electrolysers.
We are manufacturing PSA Nitrogen Gas Plants with the following specifications.
Technical Specifications:
more...
We offer high quality range of Hydrogen Gas Plant that is well known for their performance, low maintenance cost, safety features and high productivity. Available in various technical specifications, our range is in high demand by our clients spread across the globe and is offered at industry leading prices.
We offer wide range of argon recovery plants that are renowned among our valued clients for its effectual functioning. These are highly appreciated for high tensile strength and low maintenance cost.
Following are its main equipments:
(I) Air compressor: Screw/ low pressure- type
We have with us the most advanced compressor series available in the market. They have a unique combination, meeting customer requirements for low installation, operating and maintenance costs with high dependability and ease of use.
• Screw type: Screw type rotary compressors are one of the most advanced and trouble free.
• Centrifugal Type: No other turbo type oil free compressor can match its efficiency and economy. This ensures a consistent and highly reliable source of air supply.
II) Pre Cooling system
We are using highly reliable compressors of European origin. The pre-cooling system is a highly efficient skid more...
Nitrous Oxide is produced by heating Ammonium Nitrate to a temperature of approx. 250 deg.C. Ammonium Nitrate is decomposed in the process to give a mixture of Nitrous Oxide and super heated steam. Impurities include Ammonium Nitrate fumes, Nitrogen and other oxides of Nitrogen. The steam and impurities are removed by scrubbing with water, caustic soda and sulfuric acid. Nitrogen present in traces is removed by bleeding from the top of storage vessels, where Nitrous Oxide in liquid state is stored after compression.
Properties of Nitrous Oxide: Nitrous Oxide is a chemical compound of Nitrogen and Oxygen. Its chemical name is N2O. It is a colourless, non flammable, nontoxic gas with slightly sweetish taste and odour. Well-known method of distributing Nitrous Oxide is as compressed liquid in cylinders of approved design. It keeps combustion, therefore organic oils and greases of petrochemical nature be kept away from Nitrous Oxide gas. more...
SSFCI CO2 manifold system enables the consumers to draw CO2 gas at one place, thereby mishandling of the CO2 cylinders is avoided to a greater extent. All this eliminates the carriage of individual cylinders at different locations, where MIG welding sets/ user system are located. A special system is incorporated in the CO2 cylinder manifold system due to which low pressure gas (required by the user) can be sent through the pipeline.
SSFCI CO2 manifold system is properly configured, inter-locked, safe and it ensures trouble free service. CO2 is transported in the cylinder or storage tankers in liquid phase and is evaporated and expanded to lower pressure. During this process, CO2 is cooled, and it results in pressure oscillation.
We offer high quality range of PSA Nitrogen Gas Generation Plants that helps in producing nitrogen from atmospheric air and therefore the cost of nitrogen generation is very low. These are well accepted across the globe owing to the following features: more...
We manufacture cost-effective, safe and reliable nitrous oxygen gas generating systems for high quality industrial and medical use.
Technical Specifications:
more...
We are a trusted name engaged in manufacturing high performance oriented oxygen nitrogen plants as per the modern technology and designs of the Company ING. L & A BOSCHI, Italy. The respective technology are proven worldwide for their efficiency, trouble free operations, safety and low power consumption. The Boschi Column are known for its durable service and trouble free work for more than three decades in various parts of the globe.
Some of the salient features of our products are: more...
We manufacture cost-effective, safe and reliable cryogenic plants for high quality industrial and medical use. Available in various technical specifications, these are highly demanded by our client’s spread worldwide. We also offer on-site installation support for our clients benefit.
Hydrogen can be produced by various methods and production through ammonia cracking is one of them. Where nitrogen is not an impurity, where hydrogen is to be used as a reducing atmosphere and where ammonia can be used as a raw material- there we offer a hydrogen plant based on ammonia cracking.
Ammonia is cracked in presence of nickel catalyst at approximately 850°C and we get a mixture of hydrogen and nitrogen in the same ratios as these constituents are present in ammonia i.e. H2 – 75% and N2– 25%.
We are manufacturing Cryogenic Liquid Gas Plants with the following specifications.
Technical Specifications:
more...
Generating plants are based on the combustion of various fossil fuels including diesel oil, heavy oil, kerosene or natural gas. Through appropriate combustion of the fuel, scrubbing, stripping and separation technology, the CO2 gas plants meet the strictest CO2 quality standards.
CO2 gas plant is supplied with a special control panel that ensures continuous and trouble-free operation. All instruments installed on the skids are wired to junction boxes prior to shipment reducing installation and commissioning time on site.
S S Foundry PSA nitrogen plants are ideal for gas generation, gas drying and gas purification systems. They can be skid mounted and may be operated through PLC.
Nitrogen can be generated from atmospheric air, on-site by installing a captive PSA (Pressure Swing Adsorption) generator. We can develop different capacity models in our PSA nitrogen plant, to make them suitable for producing commercial nitrogen and ultra pure nitrogen. This gas is used in various industries for creating inert atmosphere.
The PSA nitrogen plants is based on pressure swing absorption method. The nitrogen gas produced with this plant is high in purity and is economical. With this plant, 99.99% purity level can be achieved in nitrogen. Fuel requirement of our plant is minimum, thereby it is highly economical. Two purity levels can be achieved for the nitrogen are 99.8% and 99.99%. The start up time for our plant is very less. The nitrogen produced in our plants can be used in varying industrial
On small scale hydrogen is produced from electrolysis of water in either Knowel’s type Mono Polar Cells or Filter press type Bi-polar cells known as electrolysers.
• Tanks and bells are welded by special quality electrodes to avoid the process embrittling between Hydrogen and Caustic soda.
• Bells are manufactured out off C.R.C. Sheets which are specially recommended for caustic soda handling.
• The Asbestos diaphragm cloth is manufactured from 100% pure long fiber asbestos without cellulose core and closely woven to avoid pin holes.
• Extra length of cloth is provided at the bottom to guard against bye-pass of gases.
• Ebonite Insulators are tested against warping under high temperature and they are checked by meger for infinity resistance.
• Nickelling of Anodes is done under strict supervision for a minimum of .002 thick coarse deposit and each plate is tested chemically for pores.
• There are so many details we more...
Our plants are designed to use industrial bye products as their raw material, which works as a boon for distillaries and breweries, where fermented gases are produced in plenty and otherwise would go waste. We recover odour-free, food grade CO2 from them. Plants themselves are 100% pollution-free causing no environmental imbalances, instead they capture CO2 which otherwise would have been mingled with the environment. Gas quality is guaranteed to be food grade and 99.99% pure in most cases. These plants are not only cost-effective in running but they are most reasonably priced to install too ! In our CO2 production plants based on any fuel burning we can co-produce N2 and distilled water as well.
We are one of the leading manufacturers and suppliers of Pressure Electrolysis based Hydrogen Gas Plants. We are well known for their performance, low maintenance cost, safety features and high productivity.
Detailed Description of the Pressure Electrolysis Based Plant
In electrolyzer, symmetrical conductive structure with anode in the middle and cathode at ends avoids the shortage of voltage. The improved sealing washer isolates hydrogen from oxygen. The separator, synthesizer, filter, cooler, cycling pump, tubes and valves are mounted on a skid for easy installation and transportation.
*The main power device is transformer and rectifier. The transformer has power supply with high voltage and the transformer can be made according to different voltage (380V or 10KV). It does transformation by three-phase double-backward star reactant equalizer.
*The trigger of rectifier is in integrated circuit way, and it has protecting interlocking mechanism such as more...
We have build our VSM auto gas station network which is spread in Gujarat today. In due course of time, we are expanding our network to States of Maharashtra, Andra Pradesh, Madhya Pradesh, Rajasthan, Punjab & Haryana.
Our auto LPG stations in Gujarat are at: more...
Nitrous Oxide Gas Plants we offer are safe and economical with an efficient N2O generation system and reduces power consumption and improve safety. Nitrogen gas plants is administered with oxygen and used as an anaesthetic gas. Nitrous oxide gas is also known as laughing gas. The N2O gas plants are manufactured in conformity with the industrial standards. N20 is stored in liquid state and can be directly filled into the cylinders. For separation of nitrogen a safety battery assembly is a safety feature. With the increase in standard of living of third world countries nitrous oxide consumption is bound to increase.
Features:
more...
Hydrogen can be produced by various methods we offer:
• Knowles type electrolytic cells to produce
• We also offer electrolyser for the same
• Where Nitrogen is not an impurity and where hydrogen is to be used as a reducing atmosphere and where ammonia can be used as a raw material there we offer a hydrogen plant based on ammonia cracking.
Ammonia is cracked in presence of nickel catalyst at approximately 850°c and we get a mixture as these constituents are present in ammonia that is: H2 - 75%, N2 - 25%
Product of NH3 cracking in this ratios can be used for the following purposes:
• Heat treatment in various industries
• For providing reduction and reducing atmosphere in bulk drug manufacture
• Sintered, bimetal, metal powder products
• Stainless Steel wire annealing
• Continuous galvanizing lines
• Brazing furnaces
• Hydrogenation of Castor oil/ non edible more...
In order to meet the requiremnts of this cutting edge technology, we work on technology of extracting CO2 from biomasses. It has set up serveral plants running on biomasses and demands are pouring. While working on this technology, we are constantly working on design innovations of its plant based on fertilizer gases, breweries and distilleries to extract even more wealth from waste.
Our flue gas plant uses boiler or any furnace flue gas as a raw material thus doing away with costly liquid fuel which is generally costlier in Asian contexts.
The flue and biomass gas plants can be designed in the different capacities ranging from 30kg per hour to 2000kg per hour depending on the available input and client requirement.
Other options may be the plants that run on waste hard coke, nut coke, breeze coke and pearl coke. more...
We offer anaesthetic gas plants also called anaesthesia plants.
We ensure in every industrial gas plant design that its production capacity is used to its maximum while keeping inputs at minimum without compromising on gas purity, which is always at par with the world standards. We also offer maintenance and training program to our customers while supplying all sorts of workforce to run the plant if and when needed.
Features: more...
STAGE 1 – Compression of Air
The free saturated air is drawn from atmosphere through a highly efficient dry-type Suction Filter into the first stage of the horizontally balanced opposed, lubricated reciprocating air compressor. The air is compressed over a multistage process to the desired air pressure (30-40 bar) and is then sent to the process skid for further use.
STAGE 2- Purification of Air
The compressed air is passed into an after cooler where the temperature is reduced to around 35 degree centigrade after which it is chilled in a Chilling Unit to a temperature of 12 degree centigrade and then passed through a Moisture Separator where the condensed moisture gets removed before entering into Molecular Sieve Battery.
Before sending the air to the Molecular Sieve Battery, air is passed through an Oil Absorber where air becomes oil free. Chilled air passes through the
Molecular Sieve Battery consisting of Twin Towers packed with Molecular Sieves more...
Among our range of industrial gas plants and chemical gas plants we offer nitrous gas plants or N2O gas plants. Perfect safeguards are incorporated in design against water and power failures and also to keep the reaction temperature well under control.
Features: more...
Our PSA nitrogen gas plant produce nitrogen from atmospheric air and therefore the cost of nitrogen generation is minimal.
Salient Features
more...
We are manufacturers and suppliers of Hydrogen Gas Plant. Hydrogen gas is generated by PSA technology. We have in-house facility and expertise for manufacturing of various pressure vessels, reactors, adsorbers, columns, heat exchangers and tanks. We take pride in providing quality equipment for gas generation, gas drying and gas purification systems. These equipment can be skid mounted and may be operated through PLC. We have numerous satisfied customers across the globe spreading over wide range of industry.
Product Attributes :
more...
The PSA Oxygen Gas Generation Plant consist of two absorption vessels and filled with zeolite molecular sieves are alternatively charged with compressed air to absorb the nitrogen.
Salient Features :
more...
Category Matches
Related Trade Leads
|
We offer anthocephalus cadamba. (Sell) |
|
|
Nitrogen Gas Plant is based on Pressure Swing Adsorption technique.
Nitrogen purity in the range of 99% to 99.9999% can be achieved through
our nit... (Sell) |
|
We are offering diverse range of industrial gas plants like:
- Acetylene Gas Plants
- Oxygen Gas Plants
- Nitrogen Gas Plants etc.
* Featu... (Sell) |
|
We are interested in psa nitrogen and air plant. (Buy) |
|
We are offering diverse range of gas plants and equipments like:
- Nitrogen Gas Plant
- Oxygen Gas Plant
- Nitrogen Purification System
- Hydr... (Sell) |
Tender Notifications
