 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Plastic & Plastic Products > Plastic Raw Materials >
Molding Compounds
Products - 26
|
Molding Compounds |
Displaying 1-25 of Total 25 Products Found |
Products
We manufacture and supply a wide
range of rotational molding powder, which are valued for their
extraordinary characteristics. Our rotational molding powder
include:
Rapid Roto Powder
Our Rapid Roto powder is a linear medium density polyethylene
specifically developed for rotational applications. These powder
feature good flow, toughness, impact resistance and environmental
stress crack resistance (ESCR). more...
We are offering PTFE micro powders. The FLUO grades are micronized PTFE and are mainly used in combination with micronized waxes to achieve higher surface lubricity and anti-blocking properties. These PTFE micro powders are heat resistant and insoluble. more...
We are engaged in offering a quality range of rotomolding powder, which is formulated using prime virgin grades of polymers. The linear low-density polyethylene is specifically designed for rotational applications. These rotomolding powder are appreciated for features like good flow, toughness, impact resistance and environmental stress crack resistance (ESCR). more...
To mould an electrical socket PolyOne developed high flow, halogen- and phosphorus-free flame-retardant unfilled and reinforced Bergamid PA6 and PA6/66 compounds in a range of colours. Flame-retardant materials with specific performance and colours were requested for the different parts of the socket, including both the inner and outer housings. Available in various loading of Glass and Flame Retardant material, for automobile and defense applications. more...
We offer plastic moulding facility to our customers such as openers, washers, stoppers etc. We undertake the injection processes such as jetting, gloss and brushing while plastic mouldings, to cater to the needs of several companies.
We also cater to the packing needs of various industries. We insure safe and secure packing of the products manufactured by industries to be stored for a long time or to be exported to some other countries. We have a skilled set of workers who are experts in the packing work. We have a full fledged team of experts for the packaging of plastic products.
Our team undertakes following processes: more...
Prominent features of our moulding powder are:
• Excellent Mouldability
• Long Shelf Life
• High Yeildage
• Low Rejection
• Wide colour Range
• Good Mechanical Strength
• Light Fast
• Non Toxic
• Non Flamable
• Heat Resistant
• Excellent Electrical Property
• Property match to ASTM,UL94,DIN
• Available in Compression & Injection Grade
• Excellent After Sales Service
• Wide range of White Shades
Benefits:
Our product have several benefits like:
• Consistent high quality assured by stringent quality controls from raw materials to finished goods stage.
• Availability of any desired colour and assurance to provide the same colour even after years.
• Largest capacity in India to ensure continuous supply of quality product to meet bulk requirements.
• Excellent technical and more...
G-Series : The ‘G-Series’ represent general purpose grades of DMC. These grades find usage where moderate mechanical & electrical properties of DMC are required with good surface finish & gloss. The application areas include toaster end plates, handles of utensils, hair dryer housing etc.
E-Series : The ‘E-Series’ represent electrical grades of DMC. These grades are used where excellent electrical properties are required in conjunction with moderate to excellent mechanical properties & excellent surface gloss & finish. The suggested applications are MCB housings, MCCB-housings, Switchgear housings, Fuse bases, Cut-outs, Bus-bar supports etc.
M-Series : The ‘M-Series’ represent mechanical grades of DMC. We make use of these products when there is a need of excellent mechanical properties in conjunction with moderate electrical properties. The products are used in enclosures, casings for more...
Here we modify the chemistry of base resins (PA, PC, ABS, PS, PBT) by innovative additive packages and fillers in order to engineer the high performance compound. Product families:
PA 6 & PA 66 Compounds Excellent impact energy absorption, self lubricating, low friction, Excellent chemical resistance, Wide use temperature, good thermal properties, specific formulations for flame retardant grades.
Polycarbonate Compounds High performance compounds based on pc as base specific additives and glass reinforcing agents. Excellent impact properties combined with strength, good thermal properties, creep resistance, specific formulations in compliance with ul ratings, good electrical insulating properties.
PC/ABS Blends High toughness even at cold temperature, dimensional stability, good indoor color stability and resistance, easy processing & design freedom, can be electroplated specific formulation for flame retarding in compliance with ul more...
we are designing and developing a wide range of anti fibrillation
compound. These are made of superior grade raw material to ensure
optimum performance at client's end. Moreover, our range is offered at
industry leading prices.
For Woven Sacks Industries, these are basically used to avoid fibrillation in PP and also reduce the cost of PP & HD material. it also offers better printing and antislip property.it Improves the tensile and flexural strength , Wear and tear of the equipments is less due to less MOH ‘S hardness. more...
Our Nameel F46 tubing is also known as
FEP tubing. These PTFE compression moulding grade are manufactured by ram extruding method with FEP
resin adding additive or without additive. These PTFE compression moulding grade nameel tubing can be
long term used under the temperature from -80°C to 200°C.
The main properties of Nameel F46
Tubing are :
more...
We manufacture purging compounds that are renowned for their performance in all purging applications. Our compound minimizes the downtime associated with changing materials or colors and/or eliminating carbon buildup. It also enhances routine maintenance, improving productivity in all thermoplastic processing applications. The industry has come to depend on us to supply an economical, highly efficient purging compound.
The PTFE ram extrusion grade prior the production of profiles in PTFE but can be also used for UHMW-PE, Compounds and for other types of materials like plastic waste. The PTFE ram extrusion grade profile can be manufactured endlessly and cut by the continuous extruding on each length. The basic material, which ptfe powders brought consolidated into an extruding pipe heated on sintertemperatur and. At the same time with the compression the Extrudat is reforwarded by the extruding pipe and comes out at the end as finished profile suitable for the subsequent treatment. The ram extrusion is suitable for rods, tubes and other profiles. Beside PTFE it is possible to extrude materials like for UHMW PE or GUR as well as their Compounds. CommonTec RAM extruder is characterised by high-quality mechanical engineering and innovative control and automatic systems. Most advanced control and safeguards methods guarantee a maximum of precision both with the pressing procedure as well as in the sinter more...
This specification covers PTFE compounds or polytetrafluoroethylene (PTFE) filled molding compounds made with virgin PTFE resins defined in a certain specification except Types I, IV, V, and VI. PTFE compounds are classified into two types which are Type I as the nonpelletized material use for general purpose compression molding and Type II as the pelletized or free-flowing material use for molding, automatic molding or ram extrusion. Each type is further classified into thirteen grades distinguished by the nature of the filler. Different tests shall be conducted in order to determine the following properties: filler content, bulk density, specific gravity, and tensile properties.
Scope
1 This specification covers polytetrafluoroethylene (PTFE) filled molding compounds made with virgin PTFE resins defined in Specification D 4894, except Types I, IV, V, and VI.
Note 1
This specification can be used as a model for other PTFE compounds more...
Sheet Moulding Compound (SMC) comprises of Glass fiber, Polyester Resin, Fillers, Catalyst, Additives, etc. DEVI have SMC Compound Machine from M/s. Schmidt & Heinzmann, Germany, with a total capacity of 1500 Kg/hr (900mm width 1m wide) was commissioned in 1975. The Plant capacity is 5000 MT/annum.
We manufacture ZHFR compounds(Zero Halogen Flame Retardant compounds) which are designed to replace standard halogenated PVC based FRLS (Flame Retardant Low Smoke) compounds. These present a safer and environment friendly alternative to FLRS PVC compounds and are generally applied in places where public safety is an important concern.
Emitting very low level of smoke and toxic gases these are highly flame retardant compounds and are best suited for wire and cable sheathing and insulation applications. Our zero halogen compounds play a vital role in maintaining cable performance as per international quality norms. The unique features of our ZHCC are:
more...
texplas industrial moulding compounds are in the form of dough as well as sheet moduling compound. These modulling compounds further consists of glass fiber/ cotton mixed with synthetic resins (epoxy/polyester/phenolics) and different inorganic fillers. texplas frp mouldings are classified mainly into four categories ac cording to their method of moulding. more...
PE is polyethylene, a HP Compound. A co-polymer of ethylene is best suited for Telecommunication Cables and has better environmental stress cracking resistance with high sturdiness. The range consists of natural medium density and high density polyethylene solid insulation compounds and black low density, linear low density, medium density and high density polyethylene sheathing compounds.
Our range of thermo plastic rubber compounds are widely used in making durable and reliable plastic products. Fabricated to suit customer’s exact needs and requirement, our polymer compounds and associated products are available in the market with fine finish copying and suitable elongation range. The features of our TRP compounds are: more...
Dough Moulding Compound (DMC) is a one which comprises of Glass fiber, Polyester Resin, Fillers, Catalyst, Additives, etc. DMC /BMC Compounding Z blade mixers capacity 50 Kg, 100 Kg & 300 Kg. Bulk filler handling capacity with bulk storage and handling of filler with 2 silos of capacity 60 Mt each, including handling and drying capacity of 3 Mt/hrs.
We are the finest quality filled compound plastic raw material manufacturers ensuring finest manufacturing standards as they are made by using the most high-tech machines in the industry. The raw material we produce is available in different colors as per the specification of the client. The raw materials are tested at each manufacturing stage and then considered to be delivered. Our filled compound plastic raw materials exhibit strength, high flow and are thermally resistant & is widely used in the Automobile industry. These are available in the following standards: more...
Our range of fire retardant low smoke (FRLS) PVC compounds is characterized with excellent electrical, thermal and mechanical properties.
We offer traditional and well established compounds that are used for cable insulation and sheathing. Our FRLS compounds are known for lower flammability, smoke density and very low HCI evolution during burning. more...
Thermoplastic elastomers granules (TPE granules) are the combination of rubber and plastic. In terms of processing, it’s a plastic and in terms of performance it is rubber. These TPE granules are partially cores linked and have brilliant properties. The fearures of TPE granules are as follows: more...
Fabricated using ace quality raw material, our range of PVC compounds for submersible winding wires has become industry standard amongst manufacturers of winding wires for submersible pumps.
The tough heat & water resistant insulation compound ensures trouble free operation of the pumps and has gained a wide acknowledgement of clients. more...
Polymethyl methacrylate is called the acrylic plastic material used for cat and molded parts. This is light weight and is used for manufacturing variety of products like tanks, shatter proof glass etc. these remain unaffected by sun and are thermally resistant.
PS stands for Polystyrene, has brilliant clarity, can be easily molded and can be delivered as per client’s specification. These PS plastic raw material can be used in: more...
Category Matches
Related Trade Leads
|
We are offering phenolic molding compound, it is widely used in cookware
handles and knobs, electrical terminal strips, drive train components,
bra... (Sell) |
|
We are manufacture of pvc compound, pvc master batches, bare copper
wire, tin coated copper wire as per requirement of buyer. Also deals in
carbon ... (Sell) |
|
We offer reprocess pvc, hdpe , ldpe, pet, ppcp- pp next to virgin at
affordable price (Sell) |
Tender Notifications
B2B Newsletter Subscription
