![]() |
|
||||||||||||
|
|
Products Directory > Dyes & Chemicals > Industrial Chemicals >
Mold Release Agents
![]()
Products - 50
|
Mold Release Agents |
Displaying 1-41 of Total 41 Products Found |
Products

Spin - 20 is a release agent with CFC-free propellant.
Application:
It is a release agent used in high temperature melt spinning process of synthetic fibers including nylon & polyester.
Typical Properties:
Specifications writers: These values are not intended for use in preparing specifications. Please contact our sales office before waring specifications on Ibis product.
Features:
CFC-free.
Long lasting release properties at high temperature.
Prevents accumulation of decomposition material of filament yarn on the spinneret
Reduction of breakage of filament yarn at joining and subsequent processes.
![]()

Leveraging on our rich industrial experience we offer an exclusive range of mould release and anti spatters that are extensively used for numerous cleaning applications. Formulated using optimum quality ingredients these are highly acclaimed in the rubber industry.
Our wide range includes:
more...
![]()

We are instrumental in offering our clients with PTFE mold release agent and release coating that is reckoned for its low friction and excellent anti-stick and releasing characteristics. These coatings are basically solvent dispersion of solid active ingredients that are useful for rendering release coating for all types of rubber and plastic compounds and metallic and nonmetallic molds at temperatures. These provide releasing of the product up to 550°F and assure protection of mold surfaces against corrosion while in storage. These coatings are available in different pack sizes ranging from 12 oz. spray cans and gallon containers to 5 gallon pails and 55 gallon drum.
The technical specifications of these release coatings are given below:
more...
![]()

This is a highly efficient release material. Its feature makes it suitable for many release applications as stated:
1) Release of Pre-cast Cement Blocks/Pipes/Cement Covets from rubber/metal/PU moulds.
2) Release of Rubber products.
3) Specialized designed emulsion to provide release on Acutest mould angles.
Properties:
Appearance: White milky emulsion.
PH: 7.0
Total solids: 25-30%.
Emulsifier type: Non Ionic.
Diluent: Water
K.K. C.U release- CU-30 (Ipart w/w} is normally diluted with (2-3 part w/w) water before application by brushing or spraying on to the moulds.
A coverage of 200-400 cm sq. of mould surface is suggested but user should determine the optimum coverage, dilution and application method on a small scale before being used in commercial production.
An operating (Curing Temp) Temp of the mould can be 120 degree to 180 degree C.
![]()

We have in store for our clients, a quality proven range of mold release agent for hard to mold parts (McLube 1711L) that is suitable for application to heated surfaces like rubber, silicone and plastic compounds. The agent is a solvent dispersion of a solid active ingredient that depicts low friction and superior anti-stick/ release characteristics. It furnishes a dry, colorless coating providing multiple release cycles without transfer to molded parts and with no buildup on the mold. Available in 12 oz. spray can, gallon container, 5 gallon pail and 55 gallon drums, these mold release agents are offered to our clients in the following specifications: more...
![]()

Available with us is a qualitative range Nonflammable Mold Release Agent and Dry Lubricant MAC-444NPB that is a nonflammable solvent dispersed from a solid active ingredient. This dispersion exhibits characteristics of excellent anti-stick/release and low friction and thus, is highly appreciated by the clients. The Nonflammable Mold Release Agent and Dry Lubricant offered by us provides a release coating that is effective on all kinds of rubber and plastic compounds, and even on metallic and nonmetallic molds at high temperatures up to 550° F. moreover, the low coefficient of friction of the coating, makes it the ideal dry lubricant.
Technical Specifications: more...
![]()

R-202/R-255/R-355/R-605/ER-40: Mould Release is an easy to use Silicons emulsion (i.e. milky white emulsion of Dimethyl Polysiloxane fluid). It is used as mould release agent and shining agent for tyre, rubber, and plastic industries. It is atso used in High-speed offset printing process.
In the plywood manufacturing industry, it prevents build up of glue and promotes easy removal of excess glue on platens and other parts of the presses used. In lamination and wood industry it is used as antitack material to the platens. It is used in glass industry for conveying equipments, treating moulds, moulded glass articles.
Special Features:
Being an aqueous emulsion it is easy to handle & apply.
Good freeze thaw stability, with no creaming or severe oiling
Good dilution stability, so that optimum concentration of silicone can be used with no excess waste
Gives excellent finish to the mould.
Easily applied by brushing, dipping or more...
![]()

We deal in a hygienically processed range of semi-permanent mold release agents (MAC-794) that is an aqueous solution of a fluoropolymer that is used for coating and releasing polyurethanes, fluoroelastomers, silicone and other organic rubber compounds. This mold release agent does not settle on standing and provides a durable, semi-permanent type release film that is dry and colorless. MAC 794 is available in 12 oz. spray can, gallon container, 5 gallon pail or 55 gallon drums that should not be frozen. Ideally, these mold release agents should be used after applying safety glasses and gloves as these are industrial products.
Below mentioned are the technical specifications of these agents: more...
![]()

Release agent for molding, extruding and fabricating rubber and plastic parts, and in die casting metals
Features
more...
![]()

Our mould release and plugging agents offers services for to improve the ease of mould release by reducing mould wax buildup. We use best products for this service to get maximum benefits in mould releasing. This mould release and plugging services finds its application in various building applications.
![]()

Decription: Dowsil-35 & Dowsil-50 are stable, water diluteable non-ionic polydimthl siloxane emulsons used as Mould Release Agents and Polish Agents. These Mould Release emulsions have low surface tensions and easy wetting properties which enable then to form very fine films over the object on which it is applied. These films formed are heat stable films which do not carbonize at high temperatures. These films are also designed to give a High Gloss finish.
Advantages & Uses: Dowsil-35, Dowsil-40 Silicone Emulsions are highly effective, easy to use. These have excellent properties, such as:
Good Freeze Thaw Stability
Good Storage Stability
Excellent Dilution Stability
Best Release Characteristics
No Creaming or Service Oiling
Economical
These Silicone emulsions find use in all rubber industries as an efficient mould release and excellent polish for rubber items. Dowsil-35 & Dowsil-45 are widely being used in more...
![]()

Pale amber liquid Concentrate & emulsified chemical.Economic chemical emulsion shuttering oil to provide stain free concrete surface.
COREMOULD MRA DESCRIPTION : Mould Release Agent APPLICATION :Provides excellent surface texture to concrete COVERAGE : 30-60 Sq.M per litre depending upon the surface. PACKING : 20 Ltrs, 50 Ltrs, 200 Ltrs more...
![]()

Our wide assortment of mould release
compounds are prepared keeping in mind the construction works. These
compounds are formulated for smooth release, easy applications and
zero contamination with concrete. Some of our range comprises of the
following:
VITCON 9032 RELOL [Formwork
Release Oil]
This is a light brown ready to use
formwork release agent which is based on synthetic oil modified with
selective additives. VITCON 9032 RELOL is specifically formulated for
smooth release of concrete from surface of formworks used in
construction industry.
Advantages:
more...
![]()

Our mould release chemicals are largely used and demanded for their superior features. These chemicals find their usage in industrial applications. The variety of mould release chemicals that are manufactured and exported by us are: more...
![]()

We are manufacturing a large quantity of Mould Release
Emulsion, which aqueous emulsion of Poly-Dimethyl siloxane. Release Agent
consists of a stable 30 % poly dimethyl siloxane fluid in water emulsion. It is
also compatible with many others organic finishing agents like paints,
coatings, adhesives and others. It is also suitable for the release of articles
where post-finishing is required.
Applications:
more...
![]()

Release agents for the Die Casting Industry: Safety-Lube®, Power-Lube®
Chem-Trend’s commitment to advancing the performance of our technology has resulted in the creation of the industry’s most comprehensive product lines of liquid and powdered die lubricants for aluminum, magnesium and zinc metals in traditional high pressure, squeeze and semi-solid casting operations.
Chem-Trend not only leads the industry in lubricant technology, it actually helped shape the industry with the development of the first effective water-based die lubricant over forty years ago. This innovative development has been the basis of our Safety-Lube® line of die lubricants, recognized as the leading brand in the industry today.
Chem-Trend’s Power-Lube® plunger lubricants play an integral part in keeping the world’s casting operations running at peak efficiency. A full line of water-based, oil-based and dry plunger lubricants more...
![]()

We have designed polymer based release sprays that has been specially designed for rubber to plastic, rubber to metal, rubber to glass and metal to metal sliding surfaces. Release sprays can also be used as a effective anti-plaster spray.
Users Guide: more...
![]()

Our range of products is in compliance with various global quality standards. We offer products for composites & FRP, which are used for RTM, hand lay up, filament winding, pultrusion, sheet molding, polymer concrete, injection molding and SMC/DMC/BMC etc. In this range, we offer: * External release agents * Internal release agents * Semi-permanent release agents - water as well as solvent based additives.
![]()

With the help of our chemical experts we offer highly effective mould release agents. Mould release agents are special types of lubricants that are applied to mold surfaces for assisting in the release of molded article. Certain characteristics which add to the excellent features of our Mould Release Agents are anti stick characteristics, parting agent, mold wash, mold lubricant and others.
Following are the uses of our mould release agents:
more...
![]()

We offer silicon based mold release agent for plastics, rubbers, polyesters, nylons etc. The colorless spray film of these silico-R acts as a general purpose lubricating agent for drying rolls, clocks and precision equipment. Our team ensure that these are precisely engineered to match the prevailing international quality standards.
Applications:
Used as a lubricating agent for all types of metal molds & dies
![]()

Our clients can avail from us an exclusive range of mould lubricant spray that comprises Mould Release Silicone Spray and Mould Release Spray without Silicone. Competitively priced, this lubricant can be formulated as per the specifications provided by individual clients.
Mould Release Silicone Spray
Available with us is Mould Release Silicone Spray that is a crystal clear, non sticky, non-staining and non-toxic lubricant that is safe to use and easy to apply. Ideal to be used as an anti-stick agent for all types of general molding, various types of plastics, rubber, bakelite core molding and non-ferrous metal die-casting, it contains a special versatile grade of silicone fluid and helps in reducing the cleaning requirement of the molds produced owing to its non staining property.
Applications: more...
![]()

Zinc
stearate with molecular formula Zn(C18H35O2)2 is a zinc soap that
repels water. It is popular as the most powerful mold release agent
among all metal soaps. It is characterized with hydrophobic effect
and no electrolyte property. Its chemical properties are insolubility
in polar solvents such as alcohol, ether and solubility in aromatic
hydrocarbons e.g. benzene and chlorinated hydrocarbons when heated.
Zinc
stearate is variedly used in various areas that include:
more...
![]()

K5SHUTRELEASE: Concentrated & emulsified chemical mould release agent. 1 Ltr, of K5SHUTERRLEASE can be diluted with 5 Ltr of water. Non-staining, easy to use & fair faced finish. Concentrated nature reduces storage & transportation cost. Recommended during dry weather. more...
![]()

These are formulated to be used on the molded polyurethane parts. These provide fast and easy part removal with no transfer and multiple release cycles per application. These mould release coating can be easily applied on various molds viz, cast urethane, foams, Integral skin as well as polyester and epoxy materials. We pack these coatings in 5 liters and 20 liters containers.
How to use
A fine film of MA 8500 should be sprayed on the clean and dried mold. Before the application of the second coat the mold should be properly dried so that the solvents get evaporated.
Although the ingredients are non toxic but standard industrial practices should be employed while applying these coats. Contact to eyes should be avoided to avoid any hazardous effects.
Properties: more...
![]()

We hold expertise in offering mould release agents, which is a lubricant that is applied to mold surfaces, for facilitating the release of the molded article. Known for their excellent antistick characteristics, our mould release agents are also known as parting agent, mold wash and mold lubricant. more...
![]()
Silicon based mold release agent for plastic, rubber, polyster, nylon etc. Its colorless spray film acts as a general purpose lubricating agent for drying rolls, clocks and precision equipment.
Applications:
All types of metal molds & dies.
![]()

Release agents for the Thermoplastics Industry: Lusin®
Molders of thermoplastic parts know that it’s all about high-quality parts at high volume production. Chem-Trend can respond to that need at every step in the process with Lusin® brand products, which not only get the parts out of the mold, but keep the machinery operating optimally.
The Chem-Trend line of non-abrasive purging compounds allows molders faster resin color changeovers with virtually no abrasion to system components. Our silicone-based and silicone-free mold release agents have proven themselves in plastics processing, resulting in better quality parts, shorter cycle times and greater productivity in a variety of operating conditions. Lusin® non-soiling lubricants keep parts moving smoothly and prevent damage due to breakage and seizing.
To assure that dies and molds are always ready to go into production, a complete range of anti-corrosion agents provides more...
![]()

We manufacture MAC 797 water emulsion that forms clear and colorless coatings. These forms excellent releases and has antistick characteristics. Because of outstanding adhesive properties to various substrates, these are used as release coatings for molding rubber compounds including EPDM, NBR, SBR, Polyurethanes and fluroelastomers and fiber / resin composites, including epoxy, polyester, thermoplastic and thermoset resins and fiberglass laminates.
Proper application of these coatings helps in achieving maximum number of releases per application. We supply these in 5 liters and 20 liters plastic containers to meet our clients’ requirements.
How to use
These can be applied to hot or cold mold but preheating of the mold to 200OF facilitates the evaporation of water thus enhancing the coating effect. After applying two coats the mold should be heated to 300OF or higher and held for at least five minutes to effect curing of the release film.
To prevent any more...
![]()

Mold release spray (70 SPRA) is a semi permanent mold release spray which gives numerous releases and works for all types of difficult and intricate molding processes.It is a rapid curing non silicon solvent based semi permanent mold release agent in aerosols that provides multiple releases with no transfer to the molded part.
![]()

We offer Mold cleaning agents for all types of molding industries and processes. As a cleaning agent it is extremely efficient in removing various deposits of polyester and epoxy resins, all oils, dust/dirt, waxes, greases, moisture and polyurethane.
![]()

We manufacture solvent based mould release under the brand name of Mc Lube 1733 H. These are supplied in 5 liters, 3.5 liters & 20 liters containers. These are the solvent dispersions of polytetrafluoroethylene (PTFE) particles that provide durable, dry and colorless film antistick and lubricant coating. These provide excellent mandrel ejection to variety of hose constructions and compounds.
The coatings produced by McLube 1733H are temperature stable and is unaffected upto 5000F temperature. The coatings don’t volatilize during cure and eliminates pinholing and other surface defects.
How to use
The lubricant is applied on the clean mandrel. For less concentrated dispersion dilutions of Mc Lube 1733 H can be done by the same solvent that is present in the product like heptane / butyl acetate blend, or any other convenient organic solvent.
The solvents of Mc Lube 1733 H are flammable so the product should be kept away from heat, sparks and flames. more...
![]()

Release agents for the Rubber and Rotational Molding Industries:Mono-Coat®, Perma-Mold®
Chem-Trend has responded to the needs of the rubber molding industry for greater efficiency by developing a comprehensive line of semi-permanent and conventional release agents. Improved part quality, reduced mold fouling and build up, and less downtime can all be realized with Chem-Trend’s Mono-Coat® and Perma-Mold® brand release agents for manufacturers using injection, injection/transfer and compression molding.
With the growing trend toward multi-component designs, Chem-Trend works with customers upstream in their design process to help them develop parts with high finish quality and improved product integrity. Chem-Trend’s ability to custom-formulate its products has helped customers realize shorter cure cycles while handling the most aggressive curatives, bonding agents and unique processing conditions that are required for special- more...
![]()

These Colorless Air Cure Mould Releases & Antistick are solvent based dispersion of solid active ingredients that exhibits low friction and excellent antistick characteristics. These mould releases are applied on the heated surfaces of silicone and fluororelastomers.
As these furnishes dry colorless coating, these are effective for releasing rubber and plastic compounds and provides multiple release cycles without transfer to molded parts with no buildup on the mold. We supply these coatings in 1Litre, 3.5Litre, & 20Litre Containers.
How to use:
To ensure optimum release results, mold surfaces should be cleaned by solvent such as acetone, or toluene and dried prior to molding. The molds can be sprayed, dipped , washed or brushed with the coatings. Two coats should be applied on the mold and are left for drying before the application of another coat.
These solvents are flammable, and thus, the product should be kept away from heat, sparks and flames. more...
![]()

Release agents for the Polyurethane Industry : Pura®
If it's made from polyurethane, Chem-Trend is helping to make it somewhere in the world. Chem-Trend’s Pura® brand of solvent- and water-based release agents operate in a wide array of applications and molding parameters. Less downtime and reduced scrap rates are important to the success of our customers‘ businesses, and an effective release agent is key to maximizing productivity.
We custom formulate both water- and solvent-based release agents in ready-to-use or concentrate forms for the specific needs of our customers’ applications — whether the desired result requires a low-gloss surface finish, post-molding painting and adhesion, open or closed cell surface or a host of other properties.
Application areas include:
more...
![]()

It is a high performance mold sealer developed to condition and seal mold surfaces, reduce mold micro porosity and act as a base coat for all types of release agents applied on new or reconditioned molds.
![]()
Mould Release Spray Aeropres LD
![]()

Brand: MOXILUBT™ - 7401
Chemical Description: Oleo Chem Derivatives
Product Range: Plastic Additives
Specifications more...
![]()

Brand: MOXILUB™ - G50
Chemical Description: Oleo-Chemical Derivative
Product Range: Plastic Additives
Specifications more...
![]()
Mould Release Spray Aeropres BLD
![]()

Brand: MONEPLAST™ - HM
Chemical Description: Oleo-chemical Derivative
Product Range: Plastic Additives
Specifications more...
![]()
Mould Release Spray Aeropres PMR
![]()
Category Matches
Related Trade Leads
|
We are offering wide range of mold release agents like:
- Mold Release System
- Mold Release Agents
- Mold Cleaning Agents
- Mold Sealer
- Mo... (Sell) |
|
We are looking for silicon free bulk molding agent for aerosol
application. If anyone manufacturing the same please send us quotation
along with pr... (Buy) |
|
1. Mold release spray silicone free chlorinate free equivalent to oks
1521
2. Wax coat spray equivalent to oks 2102
3. Anticipator spray cfc & ... (Buy) |
|
Having close business associations with various worldwide manufacturers,
we offer a qualitative range of mold release agents. These mold release
ag... (Sell) |
Tender Notifications
B2B Newsletter Subscription