Products Directory > Industrial Supplies > Filters & Accessories >
Moisture Separators
Products - 19
|
Moisture Separators |
Displaying 1-19 of Total 19 Products Found |
-
Products
- Description
- Supplier Information
Strainers: This product is manufactured by Spirax Sarco and available in Y or T type designs. These strainers remove suspended grit from steam and condensate to avoid any damage to downstream equipments with no additional pressure drop.
Moisture Separator: Moisture separator is used in heat transfer. If moisture persists in steam, it blocks heat transfer and in compressed air, it fouls the application. Our products are simple and effective way to improve both the processes. Accuracy and a long mechanical life are ensured by installation upstream of pressure reducing valves and steam meters.
Fabricated Strainer / Separator Strainer Limiting Conditions:
Max. Working Pressure and Temperature As per
Flange rating limits
Sizes: 15, 20, 25, 40, 50, 65, 80, 100, 125, 150, 200, 250 & 300 NB
Y-type Strainer: These strainers are offered with stainless steel screens having 0.8 mm dia. perforations as standard.
Available Sizes and Pipe more...- C. B. Trading Corporation
• Equipments: Variable Throat Venturi Scrubber, Flooded Elbow, Moisture Separator, Water Seal
• Industry Segments Serviced: Cement, Steel
• MOC (Material of Construction) – 300 Grade Stainless Steel, Tiscral, Carbon Steel
• Design Codes: Custom Designed- Rahul Engineering Company
We offer moisture separators, which is an important device in the gas piping for removal of extra water or any fluid carried by the gas. If the water is not removed then it may spoil the instruments downstream. These are widely used for the separation of moisture in the two-phase flow. When the gas becomes acidic after the H2O and H2S combines, it starts corroding the piping and equipment. The removal of water thus helps in reducing the corrosion, controls problems and improves the utilization efficiency of the bio gas.
Features more...- Combustion Research Associates
Type: more...
- Dry Tech Engineers
Fabricated out of Carbon Steel/Alloy Steel, as per customer's drawings/specifications. Stress relieving after fabrication. IBR inspection is offered. 3rd Party Inspection can also be offered.
- The Boiler Components Manufacturing Co
Type: Water cooled (Tube & Shell) more...
- Dry Tech Engineers
We offer a wide range of after coolers. These air/water cooled after coolers are used for air/hydraulic oil application. We classify these under the category of compressed air accessories, as well. We also offer our products as per the clients requirements and specifications.
- K. I. Engineers & Consultants
Moisture Separator, Micro Filters, Oil Removing Filter: Range: 10 to 3000 cfm
We offer a range of moisture separators, micro filters and oil removing filters of various materials and sizes conforming to the safety measures and quality specifications. The micro filter is designed to provide ease of use and functionality to the user. The oil filter is designed as per the requirement of the client. Some of the characteristics common to the above products are: more...- Compair Pneumatic Controls
The particular product consists of typical press work fabrication, which requires various dies and tools to provide required shape. This is used for controlling air pressure and moisture separation. The use of modern high-quality equipment makes the product best fitted for the particular use.
- Mech n Tech
Our heat and moisture exchange filter has a tidal volume range (ml) between 70-600 and has a compressible volume (Dead space) of 22ml. The humidification efficiency of these filters ranges between 100 ml:33.0 mg/l to 99.80 mg / l.
- Applied Trading FZE
Is an Inherent part of design, Agro waster fired boilers and Non IBR boilers produces wet steam. Are you removing the moisture in wet steam effectively before you utilize the steam in your reactors, Heat Exchangers, steam Turbines and Ejectors etc?. Why Should one use Dry stem ? Dryness of steam plays an important role steam applications Ingress of wet steam to the equipments lead to a reduced that transfer rate due to formation of condensate film, higher steam consumption for ejectors, lower productive capacity of equipments. increase load on the steam trapping system and excessive wear in valves and fittings due to erosion. Cyclomax: A New Generation Moisture Separator If we want to use a true cyclone separator for moisture separation, the equipment shall be huge and bulky in nature. Cyclomax has maintained effectiveness of cyclone sparation but avoided bulkiness of the equipment. Cyclomax is more...
- Energytech Products
Our range of moisture separators is designed to remove ingrained moisture and solids from compressed air or gas streams. The design of these separators utilizes the principal of centrifugal force to separate ingrained moisture and drain it to the bottom reservoir.
- Precision Cooling System
MOISTURE SEPARATOR cum FILTER for Compressed Air and Gas
Fully sealed high efficiency cyclonic type Mechanical Moisture Separator cum FILTER
MECHANICAL MOISTURE SEPARATOR ( CYCLONIC)
Working Principle : Moisture laden Compressed Air enters in to the moisture separator moves in cyclonic motion around the Inner Pipe . The direction of the Compressed Air is guided by the baffle plates ( fixed at a angle). This Compressed Air impinges on the M.S. baffle, which allows the moisture to get separated from the Compressed Air . The moisture free Compressed Air enters through the bottom of the inner pipe passes through 100 micron S.S. Mesh (fixed inside the inner pipe). Finally the Compressed Air which comes out is free from physical moisture ( upto 85% ) and also free from solid particles (upto 100 micron)
SALIENT FEATURES
• EFFICIENCY UP TO 85%
• SOLID PARTICLES DOWN TO 100 MICRON
• OUTER SURFACE IS POWDER COATED
• ALL INNER PARTS ARE COATED WITH more...- Multitech Sales And Services
When the air is compressed at atmospheric pressure, it becomes saturated with water vapours which further cause valves, regulators and controllers to freeze up. And so in this case, the moisture separators work that are used to collect and remove as much as moisture before the air is delivered to storage flasks. Our range of air moisture separators are designed as per ASME standards and can be customized as per the clients' requirements.
- Super Fab India Gurgaon
MOISTURE SEPERATORE MODULE:
Moisture separator with drain module consists of moisture separator with completely assembled drain assembly consisting of ball float steam trap, IndoAnushka make YBDV strainer with inbuilt blowdown valve and IndoAnushka make DWSG double window sight glass with deflector and 1 no. Isolating valve completely assembled with interconnecting piping and 1 no. Outlet nozzle as provision for bypass.
AIR VENT WITH DIAL THERMOMETER (AVDT):
Air Vent with Dial Thermometer (AVDT) assembly consist of Balanced Pressure Thermostatic Air Vent with in-built Screen, air collecting pipe and Bimetallic Dial Thermometer.
Size & Pipe Connections:
15 NB Screwed BSPT with Air collecter pipe and bottle.
Limiting Conditions for Thermostatic Air Vent:
PMO - Max. Operating Pressure 21 bar
TMO - Max. Operating Temp. 285 deg. C
Temperature Range for DTs:
a) 0 -180 deg. C
b) 0 - 250 deg. C
Note: Available NON-IBR- Indoanushka
Our range of air care equipments also includes horizontal moisture separator. It is largely used in varied industries to make the atmosphere moistures free. It is designed and manufactured to reduce and cool the compressed air temperature to desired levels.
Working principle
more...- Air Care Equipments
We manufacture air and oil separators that have a certified capacity of 1 to 3 PI RM and assured for 1000 Hours of running. All our air and oil separators are made with precision and accuracy so that the best reaches our client.
- Sheel Enterprises
Our moisture separators eliminate 99% of entrained contaminants including moisture, pipe scale, dirt and oil to improve the operating efficiency of pneumatic equipment as moisture is contaminant present which causes the most damage. When used on steam service, these provide cleaner, drier steam to heat exchangers, steam turbines and other processing equipment that requires clean dry steam. Our separators are available for different flows, line sizes, pressure, temperature, material flame rating with an advanced moisture relief system.We present demister pads which are separate mist & entrained liquid from air / gas flow and are made from knitted mesh grids of SS firmly secure the pad. Following are some of the applications:• Boilers • Evaporators• Vacuum towers, absorbers • Lube towers • Distillation of flavors and fragrances • Compressed AirBenefits:High removal more...
- Advance International
We manufacture high performing moisture separators, to cater to varied industrial needs. It is designed to act as moisture separator cum filter for compressed air and gas. It is highly efficient and is durable to sustain even in harsh surroundings. Its structure comprises of a fully sealed high efficiency cyclonic type mechanical moisture separator cum filter.
Working Principle
more...- Air Care Equipments
