 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Plant & Machinery > Plant & Machinery >
Metal Straightening Machines
Products - 32
|
Metal Straightening Machines |
Displaying 1-34 of Total 34 Products Found |
Products
These are widely used in Straightening operations such as straightening of four wheel drive, Axles, Machine ways, Screws, Rifle Barrels, Precision Shafts, Gears & Bars
|
Santec Exim Pvt. Ltd.
ISO 9001:2000   |
|
Straightening, bending & punching of plate & structural shapes (I beams, Rails & Bars) Additionally, hoops, rings & large irregular shapes can also be formed due to the relatively unrestricted die area.
|
Santec Exim Pvt. Ltd.
ISO 9001:2000 |
|
Straightening requires a special Press, Close Control of Pressing speed, Pressure & special fixtures & Supports including V-Blocks, Height anvils, Plain Straightening Blocks
|
Santec Exim Pvt. Ltd.
ISO 9001:2000 |
|
Features
1 Suitable for straightening difference thicker metal sheets.
2 Equipped with Japanese magnetic contactor and electronic components, minimum breakdown.
3 Efficient automatic material feeding equipment, a dramatic increase in productivity is achieved by land up with Uncoiler ( MT-type). Double head Coil cradle (MTD-type) (MTDM-type).
4 Straightening capacity is full enhanced by back-up rolls
5 The rack of input and output to assist and support the material.
6 All rolls are made of bearing steel, have all been quenched, hard-chrome plated and grinded with mim HRC60.
Technical Specifications:<br>
Available in 130 mm roll centres to 450 mm roll centres <br>
Number of rolls can be 10/8 and are suitable for all types of sections<br>
Straightening Machines offered by AMT are of high quality chill / S.G. Iron / Adamite Rolls more...
Depending upon the material specifications and other requirement of our clients, we offer strip straightener. Through our technical department, we advice our clients on the right purchasing. Along with the versatile range of top quality precision strip straightener, pull through models are also available. Following are some of features of our products :these model are varies up to 1300 mm sheet width & 4.0mm sheet thickness. more...
We offer S-Type Straighteners.
These are offered with the following features:
more...
Special precision material straightener of high precision, high speed and special structure for sheet
It is powerful new equipment, used in high-speed pressing; it can improve the quality and quantity of press workpieces. GJ two-section type straightening, the head is during roll straightening , there is no need straightening in the midway. In order to get good performance, the rolling material has to be straightened
We offer BCL Precision Straighteners. These are offered with the following specifications:
Special Structure:
more...
We offer Heavy Straighteners as one of our products. These are offered with the following features:
more...
Features
1 Precise micro-adjustment device, suitable for precision processing
2 Use Japanese electromagnetic contact and electric parts, long service life
3 Integrated with Uncoiler and straightener, small volume, simplify feeding operation and reduce cost.
4 All rolls are made of bearing steel, have all been quenched, hard-chrome plated and grinded with mim HRC60.
5 Equipped with Frequency converter and induction system.
6 Selection range is extensive according to the thickness of the materials and work space.
We offer high quality Uncoiler & Straighteners. These are offered with the following features: more...
We are one of the fast growing manufacturers and exporters of a wide array of sheet straightening machines. These machines are fabricated by us keeping into consideration the international quality standards. Robustly constructed to perfection, these sheet straightening machines provides smooth functioning. We offer these machines in the capacity of 0.10 to 6mm and in width of 300mm to 1300mm. more...
We are involved in manufacturing and export of wire straightening & cutting machines-storm07, which are acknowledged amidst our clients for their dimensional accuracy and superior functionality. These machines find immense application, where wire is further processed in rods and accurate straightening of coiled wire, close length tolerances & high output play a pivotal role. Incorporated with flawlessly designed fast rotating spinner, cutting off tool, straightening blocks and other components, these machines are user friendly and meet the defined operations requirements of diverse industries. We also customize our range as per the specifications laid down by our clients. more...
Straightening tube straightener machines offered by us are available in different models with different work roll configuration. The roll diameters & center distances are calculated on the basis of material thickness & width. Their precision designing and construction allow coil removal from the material, thus allowing it to pass unrestricted through die.
Straightener machines complete with cradle for automatic coil change, with 9 levelling rollers and 4 feeding rolls. Especially suitable for high to medium thickness. The material used in developing these straightener machines are of distinguished quality and is procured from leading vendors. more...
This machine is made of steel. The head of jaw is driven by hydraulic system.
The tail of jaw can adjust length of the aluminum profile and change position.
1. Pulling Force: 68UST, 35kg/cm²~5UST~230UST
2. Straightening length: 3M-50M
3. Straightening stroke: 700mm~1200mm
4. Opening of jaw: 90mm~3000mm
Features:
Square jaw can hold the profiles tight. It is not easy to slip.
Capacity:
1. Pulling force: 200MT
2. Straightening length: 2M ~ 60M
3. Straightening diameter of round profiles: 2” ~ 5”
4. Straightening diameter of flat profiles: 1” ~ 10”
Round bar straightening machines manufactured by us are manufactured from high grade raw material and are available in varied specifications as per the client’s requirements. Our range is casted perfectly for ensuring their durable operations. Apart from this they are offer at the market leading prices.
more...
PRAGMA Precision Straightner with 13 to 21 Straightening Roll is specially desgined and engineered with state - of- the art Levelling Technology to achieve absolute flatness for componenets by removing all warpage, deformation produced by blanking operations and profile gas/plasma cutting. These industrial straightening machines, press feeding lines, also can iron out all shape defects produced by Rolling Mills. PRAGMA Precision Straighteners, component straightener are available in both 4-Hi versions for steel and 6-Hi version for aluminium.
Capacity more...
Our experts are engaged in fabricating a wide range of drawing straightening cutting & disc polishing machine that are basically for fulfilling the varied requirements of our esteemed clients. Our range provides bright bar drawing and straightening of any rolled, drawn, ferrous or non ferrous solid section in cold condition. These machines are designed by using high grade steel structure along with carbide TC die that makes sure about the perfect functioning and ranges varying up to 2.5 mm. Gears of these machines are fabricated form qualitative alloy steel that makes certain of the free movement of gear train. Besides this straightening and cutting off machines are also applicable where an effective wire is used which is in the form of rods and correct straighten of coiled wire, clean cut, close length tolerances & high output are of great significance.
more...
Our range of double tube straightener are designed to reduce raw material scrap, save set-up time, decrease downtime & produce consistent end product every time.
These are designed to products like handle wire, tube, strip & flat wire, cable, wire rope as well as profile shapes. Features are as follows:
more...
We
specialize in manufacturing and export of premium grade wire
straightening & cutting machines-storm13, that are in sync with
international parameters. Incorporated with best quality components
and accessories, these machines are largely demanded in electric,
automobile and other industries.
The
feed roller of these machines withdraw the wire coil through cut-off
bush into a guide rail, where it abuts against an adjustable wire
stop, that releases the cutting operation. The cut wire piece fall
into a collecting tray. Our proficiency lies in customizing these
machines according to the clients' specific requirements.
more...
We
are a fastest growing manufacturer and exporter of premium quality
TMT, ribbed, round wire straightening machines. These machines are
fabricated by us using precision engineered components, that deliver
them flawless performance.
Further, our machines are user friendly
and easy to operate & maintain consuming the lesser time and
power. We manufacture our range keeping into mind the defined
industrial parameters. These machines are available in both standard
as well as customized specifications alike.
more...
We manufacture a wide range of section straightening machine
by using high grade raw material as per the client’s requirements. Our range
offers bright bar drawing and straightening of some rolled, drawn, ferrous or
non ferrous solid section in cold condition. Our range is highly durable and is
available at the market leading prices. Apart from, our range has the following
distinguishing features:
more...
We feel pleasure to introduce ourselves as a preeminent manufacturer and exporter of wire straightening & cutting machines-storm20. Featuring user friendly operation, these machines serve the application demands of diverse industries, where precise straightening & cutting of wire are of paramount importance. Judicial mix of diligent team and latest machines allow us to customize these machines in accordance with clients' specific needs. more...
This is the plate straightening machine which is widely used to leveling the metal plate.
Fitted with carbon steel rollers, our range of Strip & Flat Straightening Machine has MS fabricated body and is equipped with a gear box and motor panel. This machine is widely demanded in the market and is known for its: more...
This machine adopts many pate technology reasonable
structure Small Operating and noise, easy to maintainment Working
stable no need to debugging and cutting eee small. You can use at
directly after elected,
l. Straightening steel bar diameter: 4-12 mm
2. Wire draught speed: 4O-45m/min
3. Wire design length: 3O-8OOcm (can increase)
4.Cutting length error: _lcm
5. Motor power: draught voltage : 380V 4Grade_4KW Straighten voltage : 380V 4 grade -4KW
Cutting voltage : 380V , 4grade-1.5KW
6. Dimension : 187x89Oxl3OOmm
7. NW: 900KG, GW1000KG more...
Jinan fast cnc machinery co. , ltd. Is a professional manufacturer and exporter of cnc machines in china for many years.
we have exported our cnc machines to russia, india, indonesia, jordan and so on.
roller straightening machine:
uasage:
this machine is mainly used for strengthening angle with size below 125x125x12mm. Can also strengthening angle of bending,distorting and folding.
main technical specifications:
model: jx125g roller type straightening machine
founction: strengthening angle, have 9 or 11 nos. Rollers
straightening angle size : 30x30x5-125x125x12mm
angle feeding speed : 25-30 m/min
motor power : 22 kw
roller diameter : 440mm
straightening accuracy : 1mm per meter
driving mode :mechanical driving, adjustable, easy operation
outline dimension : 3000x500x1400 mm
machine weight : 3000 kgs more...
The straightening machines are used for straightening rolled steel sections such as angle, channels, rounds, beams etc. Salient features of these machines are: more...
Advanced Hydraulics straightens and flattens for all of the major steel suppliers, fabricators, aerospace, machine shops, and hydraulic repair facilities. Whether it is a cylinder rod, plate, bar, precision part, weldment, mold, or die, we have the expertise to bring it within the required specifications. We straighten, flatten, and form all items, and materials such as: Angles, I-beams, & Channels Axles Bars: round, hex & square Crank Shafts Cylinders: shafts & tubes Dies Forklift: forks & carriages Molds Precision Parts Plates: all shapes, sizes, & metals Tubes: round & square Weldments: aircraft & industrial
Power surface gallosing normally constructed with two unit one straightening roller unit coracle unit. The straightening rollers are hardened ground and plated.The rollers are adjusted depend up on thickness of the sheet. The roller die also vary depend upon sheet thickness .The cradle crescent is used for loading and winding or rewinding operation of the sheet coil. The die meter of the cradle can charge from 900 to 1500 depend up on customer requirement.
Offering a precisely engineered range of tube and rod straightening machines, we ensure to implement latest technology. Available with 2, 6, 8 or 10 straightening rolls these machines efficiently fulfill the demands of engineering industry for straightening various material.
Main features
more...
We manufacture MS fabricated oval tube straightening machines equipped with gear box, motors and panels in 2 designs i.e.6 and 1 We manufacture MS fabricated oval tube straightening machines equipped with gear box, motors and panels in 2 designs i.e.6 roll and 10 roll designs respectively. Meeting a particular requirement of straightness tolerance, this machine is widely in demand in the engineering industry. Depending on material specifications, 6 roll tube straightening machines caters to straightening tolerance of 1 in 1000 T.I.R. and the 10 roll tube straightening machines caters to straightening tolerance up to 1 in 5000 T.I.R.
The additional features of our OTSM are:
more...
Category Matches
Related Trade Leads
|
We need a brand new coal washery set up. (Buy) |
|
We are planning for candle making industry for which we need quality
machinery.
Please send us details. (Buy) |
|
We require wire nail making machines n-1.
Kindly send us details with technical specification and quotation.
(Buy) |
|
|
We offer touch panel screen fully automatic transfer moulding press and
economical model featured with accurate temp. control at all areas
before i... (Sell) |
|
|
We offer compression molding presses and compression molding machine
from india with capacity of 15 tons to 5000 tons. (Sell) |
Tender Notifications
B2B Newsletter Subscription
