 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Metals & Minerals > Abrasives & Grains >
Metal Shot
Products - 24
|
Metal Shot |
Displaying 1-23 of Total 23 Products Found |
Products
We offer to our clients zinc cut wire shot that is softer than steel, stainless steel, cast or cut wire products. Made from high grade zinc wire these are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives.
Carbon steel cut wire is a popular alternative to cast steel abrasives, and finds specific niche markets where cast materials do not offer adequate performance, This is particularly true for peening applications where a higher level of abrasive hardness is desirable or when components to be peened have a high level of inherent hardness.
Hardness Range: more...
Brass cut wire shot is manufactured to comply with all the requirements described in SAE J441. Cut wire shot is available as-cut edges rounded by conditioning, or fully conditioned to spheroids. Brass steel cut wire shot is manufactured in the following
Hardness averages : 36 to 48 HRC, 50 to 55 HRC.
Sizes from 0.4mm to 2mm dia.
We present to our clients copper cut wire shots that are manufactured using top quality copper wires. Offered at competent rates, these can be custom manufactured as per the specifications of the clients.
Give aesthetic finish to your die casting economically with Bakul stainless steel round shot.
Stainless steel shot consumption is one sixth of steel shot. Because of slow wear of stainless steel shot die casting finishes are consistent.
We provide shots in many forms like stainless steel round shot.
We provide our clients with high performance Abrasive and shorts that are available in different sizes according to the size of mesh or sieve. The selection is done on the basis of process requirements like job hardness and the required surface finish. Our range of Abrasive and Shorts are known for its durability and reliability. more...
We manufacture and supply a wide range of cut wire shots that are manufactured using quality zinc procured from reliable sources. These wire shots are formed by cutting wire into lengths equal to wire diameter (also called Wire pellets). Aluminum cut wire shots are designed in various degrees of conditioning such as normal conditioning that meets the shape requirements of SAE J441 specifications that fulfills the requirements of Aerospace specifications such as AMS 2431. Moreover, these are available in maximum diameter of 2.4mm. find application, in shot blasting, shot preening, processes to remove paints. Features: more...
we offer cut wire shots for shot blasting in sizes ranging from 0.6mm to 2.0mm. more...
We offer Steel Shots, which are an abrasives product that finds wide application in the diverse industries. Used in shots blasting operation for inner/outer surface cleaning of Steel Castings, Sheets, and many more. Also these stainless steel shots are used for removal of rust, corrosive material paint for Ship & Vessels for shot penning operation to remove surface stresses etc.
Application Areas
more...
We offer a wide range of aluminium cut wire shots that is manufactured under stringent quality control procedures that are in compliance with industrial standards and norms. These wire shots are formed by cutting wire into lengths equal to wire diameter (also called Wire pellets). Moreover, these are available in maximum diameter of 2.4mm. These aluminum cut wire shots are find application in various industries for shot blasting, shot preening and processes to remove paints. These cut wire shots are designed in various degrees of conditioning such as normal conditioning that meets the shape requirements of SAE J441 Specifications and rounded special conditioning that fulfills the requirements of Aerospace specifications such as AMS 2431. Moreover, we can customize these aluminium cut wire shots as per the specifications provided by our clients.
Features: more...
We offer steel shots for shot blasting as per SAE specification in sizes ranging from S230 to S780 (0.6mm - 2.0mm). more...
We provide our clients with copper cut wire shots that are manufactured by cutting wire into lengths equal to wire diameter. These copper cut wire shots are find application in various industries for shot blasting, shot preening and processes to remove paints. Moreover, these are available in maximum diameter of 2.4mm. These cut wire shots are designed in various degrees of conditioning such as normal conditioning that meets the shape requirements of SAE J441 Specifications and rounded special conditioning that fulfills the requirements of Aerospace specifications such as AMS 2431.Moreover, we can customize these cut wire shots on the basis of size and design as per the requirement of our clients.
Features: more...
We manufacture and supply a wide range of cut wire shots that are manufactured using quality carbon procured from reliable vendors. These wire shots are formed by cutting wire into lengths equal to wire diameter (also called Wire pellets/ peeners). Available in various sizes, these cut wire shots can be provided with maximum diameter of 2.4 mm. These cut wire shots are designed in various degrees of conditioning such as normal conditioning that meets the shape requirements of SAE J441 Specifications and rounded special conditioning that fulfills the requirements of Aerospace specifications such as AMS 2431.Our range of cut wire shots find application, in shot blasting, shot preening, processes to remove paints. Features: more...
Carbon Steel Cut Wire Shot Size available in 0.40mm to 2.50mm
Cut wire shot is manufactured to comply with all the requirements described in SAE J441. Cut wire shot is available as cut edges rounded by conditioning, or fully conditioned to spheroids. Carbon steel cut wire shot is manufactured in the following hardness averages : 36 to 48 HRC, 50 to 55 HRC. Sizes from 0.4mm to 2mm dia.
We offer clients steel shots that are not only superior in quality but also work with precision in the desired applications. Found to be highly useful in various de-burring applications, these are used in applications for components like:
more...
We manufacture high quality low carbon cut wire shots, designed as per customer's requirement. Their standard size is .30 to 2.00 mm. They are manufactured in round shape to remove the sharp corners produced during the cutting process. We have acquired versatility in the manufacturing of low carbon cut wire shots that can be made from any metal with low and high carbon.
We offer a premium quality of Aluminum Bar that are best suitable for diverse industrial usage. We as a trusted industrial raw material manufacturer offer variety of ferro aluminum alloys in different standards / grades / temper & sizes. Apart from standard range, we can manufacture alloys are per client's need.
Aluminum Bar we offer is available in in different specifics like:
Grades : 6063,6351,6101,3003,6082,2014
Temper MM
* T4511, T3511, T4, T3
* T4, T3 301-350 251-300
* T4, T3 351-380 301-320
* T6 151-300
* T6 301-380
* T6 381-400
* T6 401-450
* T6 151-300
* T6 301-350
* T6 351-400
Sizes : more...
We manufacture premium quality high carbon cut wire shot capable of super performance. The raw material is conditioned in such a way that all the sharp corners produced during the cutting process are removed.
Stainless Steel Shots are used in cleaning pressure die cast components specially in Zinc, Aluminium die casting. It gives shinning as compare to MS Shots.
Zinc Cut Wire Shot Size available in 0.40mm to 2.50mm
We offer durable Aluminium Zinc cut wire shots in ## (0.30mm - 2.0mm)size. These cut wire shots are made up of wires of type 5053 - full hard and type 1100-1345 - full hard. Their rockwell hardness range is 50-70 B and 30-40 B. Our Aluminium Zinc cut wire shots are used for various applications like cleaning aluminum or other non ferrous castings that require a satin type finish. They are capable of removing parting lines or other blemishes. The size of our Aluminium Zinc cut wire shots can be customized as per client's requirements. more...
Steel Shot is a spherical product of hyper-eutectic steel which has been fully heat-treated. It has a uniform structure of finely tempered martensite to provide optimum resilience and resistance to fatigue.
This is the most important abrasive for the majority of wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Category Matches
Related Trade Leads
|
Selling copper slag grit :
- We produced during smelting of copper which then processed into abrasive products. Typically it is composed of ferro... (Sell) |
|
|
We offer to sell polishing wheels, polishing buff wheels, cotton buff
wheels, industrial buffing wheels, buffing polishing wheels along with
aloxit... (Sell) |
|
|
We are offering all types of abrasives brushes, it is suitable for
cnc machines. (Sell) |
|
|
Offering all kind of scrotchbrit type buffing wheels and pads at
reasonable price. (Sell) |
|
We are offering fully processed and graded Copper Slag (iron silicate)
to be used for blasting / cleaning and various other applications.& sole
exp... (Sell) |
Tender Notifications
B2B Newsletter Subscription
