 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Scientific Instruments & Supplies > Testing Equipment & Machines >
Material Testing Equipment
Products - 83
|
Material Testing Equipment |
Displaying 1-47 of Total 83 Products Found |
Products
The Launderometer/ Washometer - II -For AATCC is a color testing textile machinery used for determining colour fastness of textile materials to washings. This is attained by mechanical agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap-soda solution, before being rinsed and dried. The change in colour of the specimen and staining of the adjacent fabrics are assessed with standard gray scales.
|
Presto Stantest Pvt. Ltd. (Material Testing Instruments Division)
  |
|
FEATURES
The Pendulam Impact Tester Model RSEP-284 is designed conducting CHARPY IZOD and IMPACT TENSION Test The test methods conform to IS : 1757-1973 and IS : 1499 1977 and BS : 131 part 1,2 and 3 –1972 IS : 1598-1977.
SALIENT FEATURES more...
|
Rajco Scientific And Engineering Products
|
|
Metal Testing Equipments more...
|
ETS Intarlaken Technologies
|
|
Presto digital pilling tester consists of two wooden cubical boxes with inside surfaces lined with special standard cork sheet and outside surfaces beautifully laminated. These boxes are rotated about their central axis at a specified speed with the help of a geared motor. A Pre-set Digital Counter stops the motor automatically after the desired number of revolutions. We also offer pilling tubes and cork lining for pilling tester.
|
Presto Stantest Pvt. Ltd. (Material Testing Instruments Division)
|
|
Leather Testing Equipments more...
|
ETS Intarlaken Technologies
|
|
Our range of milk adulteration testing kit is used to test the purity of the milk. These kits are mostly used in dairy industry to test the milk purity. We offer these testing kit that provide accurate test results and are quite reliable.
Bitumen Testing Equipments more...
Our specially designed electric vibrating machine is designed to suit compaction of 7.06cm mortar specimen according to IS 4031 requirements. It is used for vibrating the mix in moulds according to strictly controlled program at a frequency of 12,000 rotation per minute. These vibrators are mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The simple design of the machine facilitates easy assembly and dismantling of the cube moulds.
We have been offering a wide range of loa angles testing machine which is customized as per the specifications of our clients. Our range is fabricated using high grade raw material and complies with leading industrial standards.
Specifications: more...
We design light weight concrete meters to remove the burden some works of hand mixing. Uniform mixed batches can be obtained in the filed or laboratories. The counter balance-mixing drum can be easily tilted. The total drum volume is two cubic feet. This drum is mounted on a sturdy rubber tired stand. Drum is mounted for end discharge. These are equipped with end towing poles. The stable power consumption of these mixtures is 440 V, 3 phase, 50 cycle AC Supply.
We offer specially designed testing machine to find out the following parameters: more...
Our range of motorised test sieve shaker carries 8 sieves of 20 cm diameter and 6 sieves of 30cm diameter. The sieve shaker is driven by 1/4 HP motor through reduction gearbox. It is suitable for operation on 240V, 50 HZ 1 pH and weigh 80kg. We also provide laboratory and rotate type shakers.
The apparatus is used for determining the initial and final setting times of cement mortar and consistency of various materials too. It comprises of Vicat Frame, a bearing rod with a cup at one end, a Vicat mould (either split of single piece type), a glass base plate, an initial needle, a final needle, consistency plunger and a hydraulic dashpot arrangement for a jerk free lowering of the needle on the test specimen. more...
The machine is used for determining the aggregate impact value. The Sturdy Construction consists of a base and support columns to form a rigid framework around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380±5mm. The hammer is provided with a locking arrangement. The apparatus is supplied complete with cylindrical cup, metal measure 75mm x 50mm deep and tamping rod. more...
We manufacture and supply AIV apparatus, which are conforming to IS 2386. These machines are used for determining the aggregate impact value. The sturdy construction of our AIV apparatus consists of base and support columns to form a rigid framework around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall are adjustable. The hammer is provided with a locking arrangement. The apparatus is supplied complete with cylindrical cup, metal measure and tamping rod. Our range of AIV apparatus has been designed in a particularly heavy-duty form, with specially hardened steel surfaces for minimum wear.
The permeability is determined on cement, mortar and concrete specimens, either cast in the laboratory or obtained by cutting out cores from existing structures. Each cell is made of steel and provided with a top plate and funnel at the bottom having gasket seals held in position through bolts and nuts. Each test stall has its own control system, operating pressure gauges and valves. The multi-unit Permeameter are so designed that all tests can be performed at the same time using either the same head or varying head pressure as each test stall is provided with its own pressure regulator and control. The control instruments are mounted on a sturdy welded structural stand. All multi – units are provided with end pressure gauges. Each unit is provided with chamber pressure gauges of 0-20 kg/cm² and test pressure gauge of 0-15 kg/cm². Pressures are applied using any available pressure line at the site or a 150PSI Electric Air Compressor. more...
Our direct and residual shear apparatus comes with shear box apparatus premises, which can test the both square and circular specimens of 60mm, 70mm, 100mm, .5'' diameter. The speed rate is controlled by gears system that can keep consistent under load stress. Our direct and residual shear apparatus is provided with rapid adjustments and safety limit switch, which prevent from over strain and overloading of the apparatus. It is supplied with shear box assembly, load ring, vertical and horizontal dial gauge and weight set.
With a vast experience in sphere of metallurgical testing instruments, Instrumentation control, automation and production and R & D facilities at Technosys, complete state of art solutions regarding all types of material and structural testing can be found. With above standards and quality assured products for finding Tensile, hardness and all other Non Destructive testing equipment: more...
Our aggregate crushing value apparatus are used for measuring resistance of an aggregate to crushing. This apparatus is extensively for various industrial applications. Following are some essentials we provide along with the equipment and their respective features: more...
Our
diverse gamut of Material Testing Instrument is developed using
premium quality raw material like brass alloys, steel, aluminum,
glass sheets. Our comprehensive range of testing instruments are
widely used across various industries for checking abrasion, impact,
We
also offer customization on our gamut as per the specification of
client. Our gamut of Material Testing Instrument is as follows:
more...
We are offering DMA 242 C dynamic mechanical analyzers which are used for Dynamic-Mechanical Analysis (DMA) / Dynamic Mechanical Thermal Analysis (DMTA) meant for recording the temperature-dependent visco-elastic properties. Moreover, these determine the modulus of elasticity and the damping values by applying an oscillating force to the sample.
The salient features are as follows:
• Variety of sample holders
• Depending on the type and consistency of the sample, user can investigate the visco-elastic properties accurately over a wide modulus range
• A stainless steel container facilitates measurements in various media (immersion tests)
• With the use of a thermostat, it is also possible to carry out reliable extended time tests at higher temperatures.
• Operates in the broad temperature range of -170 to 600°C more...
We offer broad range of soil testing machines more...
We are offering CBR Load Frames (UMI-106), which are used for finding the relative bearing ratio and expansion characteristics of soil used for base, sub-base and sub-grade of roads, pavements and run ways. These can conduct tests on all types of soils including sand, gravel, and crushed stone. Our frames are used for selection of materials and control of sub base. The test is done in following manner: more...
For determination of the elongation index of aggregates.
We offer wide range of precision-engineered material testing equipment that is manufactured as per various quality standards to ensure flawless performance of our equipment. Builders and contractors mostly use this equipment for testing different material for strength and quality. Some of the material testing equipment offered by us is: more...
Our range of Wedge Grip Assembly is manufactured using quality approved raw material and cater to the needs of varied industries. This is specially used for the testing of materials to be used in tensile machines. Further, these are also useful in the testing of flat and round metals and can be availed by our clients in customized specifications as well.
Our range of wedge grip assembly is available in the following models:
more...
We provide field water testing kit which can test 14 vital parameters for drinking water & river water quality. These tests can be classified as Chemical, Physical and biological tests including coliform bacteria (which is accountable for causing water borne diseases). more...
We are offering a wide range of material and soil testing instruments to our clients at competitive prices. The instruments like Compression Testing Machine, Cube Moulds, Le Chatelier Mould, Slump Test Apparatus and others are available in customized specifications as per the client’s requirements. Our range includes : more...
Our range of HEICO digital triaxial is totally automated stress-path system for soils and conforms to the test requirements of IS-2720 (Part-12) and BS-1377. The modules of our range like load frame, confining pressure, back pressure, pore pressure or volume change are completely controlled by the dedicated computer.
The specimen is assembled in the triaxial cell and for the required parameters like strain rate, confining pressure and back pressure are programmed through the computer. Our system have window based software for controlling and data acquisition. Further, our system can perform tests under the following conditions: more...
We present analog control model with analog controller in base. 1500g capacity, 220V, 50Hz. These are manufactured out of superior quality raw material and this is why it has high resistance in the extreme conditions. These are qualitative and cost effective at the same time.
Our range of Benkelman beam, which is used for determining the deflection of flexible pavements under the action of moving loads. These consist of a 365 cm long aluminum beam in two halves arranged to give the lever arm ratio of 2:1.
The provision is made for leveling the apparatus and an anvil and a probe are fixed in opposite directions on the beam. Further, we also provide a buzzer for removing friction in the bearings.
In addition to this, we also provide on the same pavement and clamping, spring loaded clamp for movement of the assembled beam to different test points. Apart from this, the beam can be leveled by fine and coarse adjustments provided for the purpose.
Marshall Automatic Compactor Item Code: UAPT-705 The ruggedly constructed machine eliminates laborious process of hand compaction and so results in a very even degree of compaction. The unit incorporates a compaction pedestal; constructed to satisfy ASTM D-1559 and BS 594 comprises a hardwood block secured to a concrete base by a 300mm square x 25mm thick steel plate. The drive mechanism lifts the 4.53 kg compaction weight to the correct height of 457mm and allows free fall. more...
We are offering universal testing machines, which are used for studying and comparing the results in statistical format. These are perfect for usage where the Batch Reports are studied for the production. The UMI software installed in the machine provides it flexibility and assurance of lifetime quality service.
The test data can be analyzed for following graphical interpretations: more...
The apparatus consists one each of Compaction Mould Gun Metal, 100 mm I.D. x 127.3 mm height x 1000 cc. volume, complete with collar and base plate. Rammer 2.6 kg x 310 mm controlled fall.
Used for sampling aggregates ores refractory materials, pigments powdered coal, soap, cement etc.
Our range of electronic triaxial consist of the following components: more...
For resistance of aggregate that is caused by wear two hollow cylinders are attached. These cylinders are closed at one end and are provided with tight fitted covers at the other end. The inside diameter of the cylinder is of 20cms and 34cms depth. These cylinders are mounted on a shaft at an angle of 30 degrees with the axis of rotation. The shaft rotates at 30-33 r.p.m through a reduction gear, coupled to a motor.
Suitable for operation on Three phase AC Supply with 440 volts & 50 cycles. The m/c is fitted with a push button and counter starter for easy user interface. Complete with abrasive charge the machine consists of 12 cast iron spheres of steel spares. The spares are steel balls that are hardened & are of approximately 48mm dia meter, each weighing between 390-445 gram.
We offer wide gamut of apparatus that find their applications for metal testing. The wide spectrum of equipment that we provide includes Abrasive Cut off Machine, Bending Test Apparatus for Wires, Fatique Testing Machine, Mounting Press, Pendulum Impact Testing Machine, Polishing Machine, Torsion Testing Machine, Wire Torsion, Wire Wrap Testing, Spring Testing Machine, Tensile Testing Machine and Cutting & Grinding machines. Technical specification of aforementioned apparatus and equipment are mentioned below:
Abrasive Cut off Machine more...
We are offering impact testers, which have the impact testing capacity of 300 J and are designed as per the ASTM standards. These are used for conducting Izod, Charpy test, which conform to BS BSEN: 10045-2:1993, BS 131 Part 41972 (Amended 15 Aug 1993). The machine works as follows: more...
We offer comprehensive range of asphalt testing equipment includes Centrifuge Bitumen Extractor, Core Drilling Machine, Ductlity Testing Machine, Marshall Stability Testing Machine, Marshall Automatic Hammer, Planetary Mixer Bitumen and Film Stripping Device (Electrically Operated). Some of the common characteristics of our asphalt testing equipment are given below:
Centrifuge Bitumen Extractor more...
We offer automatic bitumen compactor, which is a new ‘HEICO’ compactor automatically stimulates hand compaction as specified in ASTM D-1559 and develops a uniformity in the test procedure.
These consist of a chain drive coupled to the motor through a gear box and carries a locking device, which lifts and releases the hammer through a specified height. Further, our range is fitted with a counter that trips the motor automatically after 50 or 75 strokes as set on it. In addition, our products are suitable for operation on 220 V, 50 Hz, single phase supply.
It is designed for conducting Izod and Charpy test. The Test method confirms to IS: 1598-1997, 1757-1973, 1499-1977, 3766-1977 as well as BS: 131-Part 1,2,3 & 4 - 1972.
The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. One release, the pendulum swings down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the position of maximum pointer on the dial scale.
We offer our clients complete range of metrology instruments that are manufactured by ERICHSEN GmbH & Co. KG, Germany, world’s leading manufacturer's in this field. The superior technology available in this machinery allows exact measurements of physical parameters force, torque, pressure and displacement.
Some of the equipment offered under this include:
Tensile Testing Machine: Used for facilitating goods acceptance inspections. Their robust construction also makes them suitable for in process controls and compression tests.
Pressure testing Machines: These material testing machines of the UNIMAT® C + UNICONTROL® series comply with the current DIN 51220 and DIN 51221 standards for tensile testing machine & meet the standards and regulation to CE qualification.
Grips: We offer a wide range of clamping tools and testing devices that are available both in standard & customized versions.
Measuring and Display Devices: To more...
California Bearing Ratio Test
The soil testing equipment consists one each of the following: Load frame, Hand operated, Capacity 5000kg. with high and low rates of travel of the load screw. Mould made frame Gun-metal / Brass, 150mm internal dia x 175mm high, with perforated base plate and extension collar 50mm high. Penetration piston, face dia 50mm with adjustable bracket for penetration dia gauge. Circular metal space disc, 148mm dia x 47.7mm high, with detachable handle. Annular metal weight, 2.5 kg., 147mm dia with 53mm dia central hole. Slotted metal weight, 2.5 kg., 147 mm dia with 53 dia slot. Perforated plate made of Gun-metal / Brass 148mm dia with adjustable stem and lock nut and a metal tripod for dia gauge. Cutting collar, Rammer 2.6 kg. weight with drop of 310mm. Rammer 4.89 kg. with drop of 450mm. Supplied without proving ring and dial gauge. more...
We offer a wide range of testing instruments. They are: more...
Our range of hand-operated material testing apparatus is widely used for testing compressive load capacition of various object mainly springs.The machine hasdigital display of load and displacement.The machine can be used to tensile properties of the object with suitable clamps. more...
Direct Shear Apparatus Motorised 12 Speed
Direct Shear Apparatus (Hand Operated)
Description: Same as above but unit is electrically operated to give the following 12 rates or strains. 1.25, 0.625, 0.25, 0.125, 0.0 0.025,0.01,0.005,0.002,0.001,0.004 and 0.0002 mm/min. The direct shear apparatus is suitable for operation on 230 volts sing phase a.c. supply. more...
Category Matches
Related Trade Leads
|
|
We offer to sell material testing equipments for aggregate testing,
bituminous testing, brewery testing, chemicals testing, pharmaceutical
testing,... (Sell) |
|
We are offering exclusive range of material testing equipments like:
- Aniline Point apparatus
- Color comparator
- Drop point apparatus
- Fl... (Sell) |
|
We are offering exclusive range of material testing equipments like:
- Aniline Point apparatus
- Color comparator
- Drop point apparatus
- Fl... (Sell) |
|
We are offering exclusive range of material testing equipments like:
- Aniline Point apparatus
- Color comparator
- Drop point apparatus
- Fl... (Sell) |
|
|
Dear Sir, We would like to introduce our selves as a leading
manufacturer & supplier of various types of Testing machines like
Hardness Testers (Ro... (Sell) |
Tender Notifications
B2B Newsletter Subscription
