Products Directory > Industrial Supplies > Conveyor & Transmission Belts >
Magnetic Pulleys
![]()
Products - 12
|
Magnetic Pulleys |
Displaying 1-12 of Total 12 Products Found |
-
Products
- Description
- Supplier Information

Erich magnetic pulley is a widely used type of magnetic separator for the efficient removal of tramp iron. It is used either as the head pulley of a belt conveyor installation or as drive pulley in a self contained pulley type separator. Electromagnetic pulley is basically composed by a set of rolled mild steel pole shoes of high magnetic permeability. Coils are made from aluminum of copper wires or strips with class insulation. Feeding is made through a bipolar axial slip rings direct current usually 110V or 220V. Available diameters from 250 to 1500mm and length up to 2000mm. more...
![]()

Our range of magnetic pulleys are mainly used as head pulleys in belt continuous and automatic removal of tramp metal from material flow. As the tramp metal contaminated material comes within the pulleys magnetic field, the ferrous tramp gets attracted and is held to e belt till it reaches the underside. The cleaned and non-magnetic material gets discharged over the pulley in a vertical drop. The encompassing array of our powerful permanent magnet separation pulleys meet the specific size and installation needs of most conveyor system applications. Our permanent magnet pulleys provide effective solutions for metal removal and are provided in four different hub styles such as:
Extended hubs
Flush hubs
Recessed hubs
With no hubs
Special Features:
304 SS Faces
Removable MS shaft
Four hub styles
Flat Face
Key way & set screws
![]()

With the help of our expert team, we are designing and developing a wide range of magnetic pulleys. These are designed with a set of rolled milled steel pole shoes and are covered with aluminum or stainless steel shell.Application:• Used as head pulleys in belt conveyors for removing ferrous contaminants from material flow, in water recovery, mining and recycling processes• Waste recovery• Feed & grain• Mining• Recycling applications. more...
![]()

We offer highly durable and qualitative magnetic pulleys that are used for removing tramp metal. It is mostly used as head pulleys in belt continuous and automatic removal of tramp metal from material flow. These comprehensive powerful permanent magnet pulleys are used for protection of processing machinery such as crushers, pulverizes and other valuable equipment. In addition these are also used for purification of food stuffs, chemicals, pharmaceuticals and foundry sand.
![]()

Our range of magnetic pulleys find their application as head pulleys in belt conveyor systems. These pulleys are used to enhance the purity of product and to help in the protection of the process equipment from tramp metal damage. Our products provide continuous, effective to removal of ferrous metal from the product flow.
Our products are installed at the discharge end of the conveyor and come in different sizes as per the clients specifications or the area of application. We offer our magnetic pulleys with flat or crowned pulley face, fixed shaft or no shaft, taper locks and set screws and are provided in rare earth neodymium or standard ceramic. Offered in smooth or lagged surface, our products have precision machined key ways and are available in four hub styles like
Recessed Hubs
Flush Hubs
Extended Hubs
No Hubs
Our products find their application in different industries like wood & plastic recycling, crushed or broken stone, more...
![]()

These machines are compact in size and easy to use. The machines allow to tighten and strengthen entire specific major muscles group.
![]()

We offer heavy-duty magnetic pulleys that helps in removing tramp metal. It is mostly used as head pulleys in belt continuous and automatic removal of tramp metal from metarial flow. As the tramp metal contaminated material comes within the pulleys magnetic field, the ferrous tramp will be attracted and held to belt until it reaches the underside.
This comprehensive powerful permanent magnet separation pulleys meet the size and installation requirements of most conveyor systems applications. Installed as head pulleys in conveyor systems this magnet pulleys provide effective, full time automatic tramp metal removal.
It is also provided in four different hub styles-extended hubs, flush hubs, recessed hubs and with no hubs. Available with or without lagging and with crowned or flat faces, this pulley can provide many years of durability and extended service life.
![]()

SAIDEEP manufacture a wide range of Rare Earth and Ferrite Magnetic Pulleys. These Pulleys are widely used to remove tramp iron mixed with the material moving on a conveyor belt.
The Magnet pulleys are always installed at the discharge point of the conveyor to separate tramp iron from the product moving on the conveyor belt.
Application :
The permanent magnetic pulley is dual-purpose equipment used for protection of crusher Jaws or other machinery and also for purification and concentration of magnetic material from the mines. It has the widest application in food, chemical, ceramic, paper, coal handling, foundry operation and mining industry.
Construction :
The magnetism in a Permanent magnetic pulley is produced by internal assembly of magnets enclosed in non magnetic stainless Steel shell. The steel Shaft is extended on both sides. One side is provided with Keyway. The Pulleys have a face width of 50 to 100 mm more than the more...
![]()

Our product offers a low cost approach to efficient tramp iron removals. These are high strength permanent magnet pulleys which are effective in every conceivable application where uninterrupted tramp iron protection as well as purification is required.
Our magnetic pulleys keep the conveyor line on-line, fast moving and efficient. This product features a continuous radial pole design for high performance.
Its applications are:
· Tramp iron removals from conveyor belts
· Filtration and concentration of ores, chemicals and granular products
Some of its features are:
· Efficient, cost-saving recovery of harmful tramp irons
· Super-tough, trouble free operation
· Maximum power and separation
· Develops powerful magnetic field at the center of the belt
· Standard sizes available in all diameters to match most conveyors.
![]()

Magnetic pulleyes are used at the discharge point of the conveyor to separate tramp iron from the product moving on the conveyor belt. The pulley is particularly very useful in iron ore purification to ensure broader working field. Pulley is also used in conjunction with suspension magnet to efficiently control the tramp iron removal. Magnetic pulley can be manufactured using permanent magnets or electromagnetic pulley by using aluminum or copper coils. Electromagnetic coils of magnet are fully protected and sealed as these are normally used in open places and are subjected to varying atmospheric conditions. Magnetic pulleys are supplied complete with sealed bearing units on both sides and in diameter and length to suit individual requirements.
![]()

Erich permanent magnetic pulley is a dual purpose device. It functions as drive pulley for the belt conveyor and at the same time provide effective, automatic and continuous removal of tramp metal from a material flow.
The permanent magnetic pulley is basically composed by a set of rolled milled steel pole shoes of high permeability. Permanent magnets either strontium ferrite or high power rare-earth magnets are used. The magnet is of bi-polar nature with its field intensity uniformly distributed across the entire surface. Magnets are covered with aluminum or stainless steel shell and are bolted to heavy duty stainless steel end flanges and mounted to a sheet shaft. Available diameters from 250 to 1500mm and width up to 2000mm. more...
![]()

We offer impact resistance rubber lining for tanks and vessels for high impact materials. This kind of rubber linings is mainly used in stone grinding tumblers and ball mills.
- Eureka Conveyor Beltings Private Limited
![]()
