 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Magnets >
Magnetic Filters
Products - 18
|
Magnetic Filters |
Displaying 1-16 of Total 16 Products Found |
Products
We offer meticulously designed magnetic filters that are widely used for separating iron particles from large volume liquid or semi liquid line flow systems. These are also installed in a process line along the passage of fluid flow. The magnetic filters are easy to clean and re install. These are also available in varied sizes to suit the requirements of our customers.
|
Pragati Enterprises
  |
|
Our range of bullet magnets are designed for heavy duty large volume liquid and semi liquid line flow system. The bullet magnets captures tramp metal particles that migrate to the rear of the tubes where they remain protected from wash off until the tubes are cleaned. The bullet magnets are easy to clean and also are customized as per the requirements of our clients.
|
Pragati Enterprises
|
|
We are amongst the reputed manufacturers of iron removal filters, used for removal of dissolved iron, present in the form of lower oxides. Designed in line with international quality standards, these filters are used for removing both oxidized iron and iron present in solution. Compact size plants have filter media that are capable of removing small amounts of hydrogen sulfide.
With practical upper limit of iron concentration for these filters being 5 ppm, the filter has three functions:
more...
For very high precision grinding, honning, broaching or lapping operation addition paper band filter is recommended along with coolant magnet. Use of paper band filter takes care of fine non ferrous particles which are also present in minute quantities in the coolant liquid. The coolant magnet is housed above the paper band filter and liquid free from ferrous impurities fall on filter paper. The process is fully automatic and consumption of filter paper is negligible vis-a-vis the machine performance.
Normally coolant magnetic separator are made in following standard sizes. Machines up to 500 liters per minute capacities can also be manufactured against requirement.
more...
Erich Permanent magnetic Funnel Type fitters are available with single, dual and multiple magnetic elements for higher capacities. The magnetic assemblies are so designed that the majority of trapped iron particles do not interfare with the line of low. The rate of flow in therefore not reduced. The magnetic assemblies in these filters are readily removed and very easily cleaned Available in ferrite, Alnica and high power Rare – earth magnets and complete stainless steel 304 construction
A Range of Electro magnetic ferrous filters specially designed for ceramic slurries and glazes to separate fine iron particles fine iron particles, scales etc. in also available.
more...
We are engaged in manufacturing magnetic candle which are occupy less space and are compact in size. These are appropriate for the cellular installations with the good collection which are ideal for the viscous liquids. They run only on one drive and also require less power and are highly suitable for handling of the ferrous dirt from large flows of coolant. These are highly suitable for rolling, grinding, wire-drawing and in accordance of requisite norms and standards. Some of its features are:
• High durability
• Low maintenance cost
• Resistance to corrosion
Magnetic filters are widely used for filtration of fine ferrous impurities found in more...
Super power rare earth magnetic plates are useful for removing very fine and weakly magnetic impurities present in the product. The super power plates have five times more magnetic pull than conventional plates and are easily installable and available in all sizes to suit customer requirement.
The range of magnetic filters manufactured by us is used for the filtration of iron particles from products present in the liquid form. These magnetic filters have been manufactured using ceramic or high intensity rare earth magnets. These are frequently used in hydraulic circuits in cooling systems for separation of ferrous material.
The magnetic unit of magnetic filter is enclosed in stainless steel or M.S. Housing which make it suitable for chemical, paper & ceramic industry. These can be removed easily by releasing the fasteners. In order to remove the fine magnetic particles or oxidized iron high intensity rare earth magnets is recommended.
Features: more...
Everest Magnetic Filters are
widely used for filtration of fine ferrous impurities found in
lubricants, coolants hydrulic oils, slurries etc. They could be installed
at a suitable location along the passage of fluid flow. They are
constructed with high energy permanent magnet arranged in a circuit.
They are available in three standard sizes- more...
Paper Band Cum Magnetic Coolant Filters:
Highly efficient way of filtration guarantees fine finish, dimensional accuracy, increases tool life. Keeps your machine clean & reduces costly machine down time. Avoids bacterial growth & wastage of expensive coolants. The filtration system is automatic, no manual attention is needed. Where heavy stock removal increases the temperature of the coolant, this filter helps to reduce temperature of coolant, this filter helps to reduce temperature due to exposure to air.
Magnetic Coolant Filters:
'UNIVERSAL' Magnetic Coolant Clarifiers are designed for continuous filtering coolant oils contaminated with ferrous materials. These equipments are light weight, compact design and can easily be installed. These Magnetic Coolant Clarifiers are manufactured in two models: KTP & NRM. Capacities 30 Lpm to 100 Lmp.
FOR MACHINE TOOL INDUSTRY more...
Magnet Filter Type 2
These are widely used for removal of fine iron impurities from lubricants, liquid chemicals , slurries, coolants liquid pharma / food products. This can be installed in a process line along the passage of fluid flow. High intensity magnetic candles are installed inside the s. S 304 / 316 housing capable of arresting fine iron particles from flowing material. Flowing material is made to travel around full magnetic field region of candles for effective arrest of iron particles. Magnetic filters can be designed for required flow rate considering type of the material to allow flow of product under some pressure. All filter shells are hydraulically tested to check the leakage at joints and sealing points.
Special Features These filters are in effect simple magnets or magnet assemblies which when suitably located in the fluid system can attract and retain ferrous metal, nickel & cobalt particles offering a remanence in excess of 10000 gauss and a B.H. max of the order of 4 x 106 gaussoersted. This magnetic filter are of different types :- e.g. Candle Type, drain Plug Type etc. Application It is used to remove ferrous particles & swarfs from process feed lines, pneumatic conveyors, gear boxes, engines, fluid & pneumatic pipelines etc.
We offer a wide range of magnetic drive filter units, which are suitable for delivering general plating solutions. These filter units consist of motor driven polypropylene pump with a mechanical seal or a magnetic drive pump without seal. Further, our range also comprises of the following features: more...
Magnet Filter Type 1
Category Matches
Related Trade Leads
|
We offer to sell magnetic filters, industrial magentic filters and
online magnetic filters. (Sell) |
Tender Notifications
B2B Newsletter Subscription
