![]() |
|
||||||||||||
|
|
Products Directory > Industrial Supplies > Magnets >
Magnetic Equipment
![]()
Products - 114
|
Magnetic Equipment |
Displaying 1-50 of Total 114 Products Found |
Products

Our range of bullet magnets are designed for heavy duty large volume liquid and semi liquid line flow system. The bullet magnets captures tramp metal particles that migrate to the rear of the tubes where they remain protected from wash off until the tubes are cleaned. The bullet magnets are easy to clean and also are customized as per the requirements of our clients.
|
Pragati Enterprises
|
|
![]()

We offer a suitable range of Pot Magnets that are compact units consisting of powerful alnico/rare earth magnets. The magnets are assembled in mild steel pots with the help of aluminum insulating and retaining rings. Our diverse range of pot magnets serve innumerable applications such as clamping, holding, moving of small components through short distance etc. However the size and shape of the magnet varies according to its application.
|
Pragati Enterprises
|
|
![]()

We offer meticulously designed hopper magnets that are exclusively used by the plastic industry. These magnets protect the molding machinery and other processing equipment from damaging ferrous metal. Our range of hopper magnets is easy to remove small particles of ferrous metal from free flowing powders and granular material. These permanent magnetic separators offer a cost efficient way of removing harmful tramp metal and light concentrations of ferrous contaminants from chemicals, pharmaceuticals, cosmetics, plastic, food, grain, fertilizer, sand, clay and minerals.
|
Pragati Enterprises
|
|
![]()

We present reliable impulse demagnetizer which demagnetizes the magnets in a single shot. It operates on the principle of capacitive discharge. The unit is connected to matching coil which generates high amplitude decaying field. Since the stored energy is used in a single shot, the power consumed by the unit is extremely low. Typically, in one impulse it demagnetizes approx 50 magnets( 12x12x15mm). It operates at approx 20 times/minute and consumes approx .05 kwh units of power. Its coil does not require special water cooling.
![]()

Drum Type Magnetic Separators are used for Automatic separation of Magnetic Particles from Fine Powder. Drum Type Magnetic Separators are available in two designs.
Operating Principle :
Permanent magnetic drum is designed and manufactured in such a manner that only half of its side is magnetized. An empty stainless steel 304 shell which surrounds the magnet rotates freely. The magnet is stationary. Ferrous particles which get attracted are collected separately as shown.
Application :
The magnetic drum separator is most ideal for separation of iron particles from granules and powders. It is widely used in Glass, Ceramic, Chemical, Foundry, Fertilizer, Plastic and Food Industry.
Magnetic drums up to 600mm diameter and 1500mm length (Ferrite and Super power) can be supplied on short delivery basis. Please send details of your requirement to offer the most appropriate size for your plant.
Advantages : more...
![]()

Star Trace is quality conscious company engaged in manufacturing and supplying magnetic rotary grates, which are highly suitable for dusty installation where an enclosed system is necessary. The slowly rotating tube circuit will catch unwanted or damaging tramp iron and prevent bridging of sticky or powdery materials like flour or com starch. High quality magnetic rotary grates are reliable, durable, high performing and available at highly affordable prices. We are supported by qualified and experienced professionals and backed by advanced manufacturing units, which help us in offering quality products for complete satisfaction of customers.
Features: more...
![]()

Magnetic Separator clarifies offer the excellent means of filtering for ferrous particles. Where purification is required and contaminates differ in form, size and composition, Magnetic Separator are recommended for Grinding, Honing, Transfer-lines and machining centre. It also can be used for rolling mills for filtering coolant which helps to improve the surface finish of the sheets.
Working:
The contaminated coolant from the machine is fed into the inlet of magnetic separator. The dust particular are attracted and arrested by the magnetic drum. The magnetic drum attracts the dust particles when is goes between body and drum with the help of a scraper dust and allows squeezes by a synthetic rubber roller mounted on the spring drive powder stored into the dust collecting tray. It filters almost 95% for ferrous particles.
more...
![]()

Erich magnetic coolant cleaner is a continuous cleaning magnetic separator that removes ferrous material from the coolant flow and deposits it into a disposable bin.
Erich magnetic coolant cleaners prove the best tools to remove fine ferrous chips or grindings from machine coolant systems, thereby ensuring accurate grinding, improved life of coolant and cutting tools. Available in capacities from 50 to 1000 litres per minutes
more...
![]()

We manufacture Drawer magnets which are available in different styles to suit specific application needs. Drawer Magnets consist of rows of round magnetic tubes that are assembled into drawers. The tubes of the drawer magnets are aligned on alternating centers from the row directly above or below it. The powerful magnets at the neck of the molding machine stops the flow of the tramp material directly into the machine parts. Our drawer magnets are very essential engineering products which are used for protecting injection molding machines, molds and dies.
![]()

These drums have magnetic strength upto 6000 gauss on the surface and very high magnetic gradient. They can attract fine iron & iron oxide impurities from a distance of 50mm without any problem. This results in higher handling capacity & assures optimum purity of end product. The drum assures automatic separation of magnetic non magnetic materials & it used in automatic process line.
![]()

We are one of the pioneer manufacturer and supplier of Over Band Magnetic Separators. These products are made from the most established quality raw materials for reliability, durability and outstanding performance of products. We have highly sophisticated manufacturing plants and qualified engineers who strive with dedication for customized products. Our company, Star Trace manufactures and supplies top-class products to ensure complete satisfaction of the customers.
Range of Application:
In many industries, Star Trace over band Magnetic Separation and Magnets have become primary requisite for decades. These are used to remove magnetic parts from non-magnetic materials for projecting crushers, mills, processing plants etc. against too much wear and damage. Over band Magnetic Separations are sued for nonmagnetic bulk goods with iron contamination, for instance cleaning of foundry sand, coal and the like. These products are also applicable for recovering magnetic more...
![]()

Magnetic chutes are used for trapping and separating iron particles mixed with dry, granular or powdered materials in industries such as more...
![]()

Permanent magnetic (PM) Tramp Iron separators are specially designed to clean tramp metals from the products conveyed by the belt, vibratory feeders or inclined planes. Such separators are mainly used to protect machines from ferrous particles and other iron tramps. Such Permanent magnetic overband separators are used when an automatic removal of ferrous particles is a requirement. Our separators are designed to operate at a predetermined working gap over the conveyor, which could be customized also. We consider various parameters while choosing the type of Overband, such as more...
![]()

We offer magnetism equipment, which are used in laboratories so as to handle the magnetism related experiment. Known for their accuracy, these equipment are available in various sizes & specifications, to meet the requirement of laboratory, research centers and others. We offer these equipment at most reasonable prices. more...
![]()

We at Star Trace are recognized manufacturer, supplier and producer of High Gradient Magnetic Separators (HGMS) and Wet High Intensity Magnetic Separators (WHIMS). High Intensity Magnetic designs, develops, manufactures and markets Magnetic Separation Equipment for beneficiating weakly magnetic minerals, and for purifying non-metallic minerals. Star Trace professionals have specializes in the field of magnetic separation technology. We have been manufacturing and supplying these equipments since 1983. It became a leading supplier of WHIMS in India in 1980s, and it has become a leading supplier of high gradient magnetic separators since 1990s.
Applications:
Star Trace on VPHGMS is suitable for processing fine, weakly magnetic minerals, such as hematite, limonite, ilmenite, manganese, wolframite, tantalum-niobium, and etc. It is also suitable for removing iron and titanium from non-metallic minerals such as quartz, feldspar, nephline, fluorite, ceramic material, and etc. more...
![]()

We are offering mineral beneficiation plants that have been catering to the following minerals:
more...
![]()

For very high precision grinding, honning, broaching or lapping operation addition paper band filter is recommended along with coolant magnet. Use of paper band filter takes care of fine non ferrous particles which are also present in minute quantities in the coolant liquid. The coolant magnet is housed above the paper band filter and liquid free from ferrous impurities fall on filter paper. The process is fully automatic and consumption of filter paper is negligible vis-a-vis the machine performance.
Normally coolant magnetic separator are made in following standard sizes. Machines up to 500 liters per minute capacities can also be manufactured against requirement.
more...
![]()

All of our magnetic separators are based on its operation on Direct current. High permeability mild steel constitutes the iron part of our separators ensuring high magnetic field distribution to produce maximum force density at a selected working distance from the magnet face. The bottom plate is made of heavy stainless steel plate. Our products are known for their high ruggedness. The Over band belt type separator is used to facilitate automatic discharging of tramp irons in the same direction as the main conveyor. Some of its features are: more...
![]()

Electromagnetic lifters and positioners for workshop use, with enclose gear-suitable to lifting and / or positioning for welding purpose. Dia meters from 100 mm to 500 mm. Available for AC and DC power source. more...
![]()

Permanent magnetic grills are used for separation of iron particles mixed with dry, granular or free flowing materials in industries like more...
![]()

Magnetic Hump is used for removing tramp Iron mixed with powder flowing down the vertical pipe. Magnet consists of two Super Power Rare Earth Magnetic Plates hinged on the zigzag path as shown. The hinged magnetic plate can be opened and cleaned easily.
When the material falls it strikes directly on the first magnet plate. Major Iron contamination gets deposited here. The material then flows to the second magnet where escaped Iron particles are removed. This insures a clean Iron free material.
APPLICATIONS:
Rare Earth Magnetic Humps are used to remove weak Magnetic and fine iron contamination. The magnetic power of the plate can be kept from medium to high power (12000 gauss) depending on the application. The hump is designed for easy installation in, Ducts, Feed Tables, and also can be at discharge of screens, conveyors etc.
![]()

Super power rare earth magnetic plates are useful for removing very fine and weakly magnetic impurities present in the product. The super power plates have five times more magnetic pull than conventional plates and are easily installable and available in all sizes to suit customer requirement.
![]()

We are quality conscious company engaged in manufacturing and supplying superior quality heavy duty drawer magnets. These standard drawer magnets are developed and manufactured using the best quality raw materials and by proficient professional to ensure complete satisfaction of customers. Our range of drawer magnets offer best performance to the customers and available at market leading prices to suit budgets of customers.
Drawer - In - Housing (EZ-Cleaning):
Benefits: more...
![]()

We offer Concentrator Separators, which are extensively used for advancing or concentrating material containing a very high percentage of magnetic or where magnetic/mechanical agitation is required for the separation of many difficult materials. These comprise of:
An electromagnetic Vibratory Feeder (with sub-hopper), which provides step less regulation of feed for even flow.
Two Conveyor belts The Upper belt running ahead of the lower conveyor belt and in the same direction.
Permanent Magnet unit for picking Tramp Iron
Magnetic and Non-Magnetic collection Hopper
The Drive
The Supporting Structure
Application
These are used for Improving Sponge Iron/Cast Iron borings, Steel/Brass Aluminum turnings, Chips and for mineral beneficiation application such as:
Purification of dry ceramic and refractory materials
Reclamation of abrasive grains
Removal of iron contamination from chemical powders and more...
![]()

Powerful dependable and economical protection against the danger of fine iron and tramp iron damage in processing lines. Erich plate magnets can be installed in spouts, ducts, feed table and housings as well as suspension over non-magnetic screens, conveyors etc.
Available in three magnetic strengths. Sizes from 4 to 60 inches (102 to 1524 mm) width stainless steel and milled steel or whole stainless magnetic poles construction. Stainless steel with stepped magnetic poles construction. Available in ferrite and high power para earth magnetic materials. more...
![]()

We design and supply precision-engineered magna roll machines that are magnetic separators with high intensity rare earth permanent magnet roll used for elimination of paramagnetic particles and fine iron particle or in other words purification or elimination.
The machine is used for various requirements in different industrial applications, including - mineral processing, ceramics, abrasives, industrial waste, laboratories and many other applications.
In many cases, the magnetic roll machines can substitute the conventional electromagnetic because of the high intensity magnetic field. Economically priced, with low electric power consumption, the roll machines can replace induced roll electromagnetic separators when the susceptibility of the paramagnetic particle to be treated is adequate to be separated with a magnetic field of 20,000 gauss.
![]()

Our over band or cross belt magnetic separators are suspended over conveyor with a powerful rectangular magnet which pulls out tramp irons. The cross belt magnetic separators provide a continuous and automatic discharge of collected tramp irons. It has a provision of Cleated self cleaning belt, which helps in sweeping away the tramp iron in a specific place. This product is widely used to protect machines such as Crushers, Shredders and others. They help in removing ferrous particles in Foundries, coal mines, cement works, food processing industries, domestic waste recycling plants etc.
![]()

Magnetic plates are used for separation of trapped iron in industries such as Food (Tea,, Spices, Coffee, Cocoa, Milk Powder etc.) more...
![]()

"CRYSTAL" Brand
Sine Table is complete Sine System for precision grinding. ' Crystal' Sine
table is supplied with Fine Pitch Permanent Magnetic Chuck.
In
Built Features :
1
Low height
2
Made from high quality steel.
3
Hardened & Ground to 58 Rc
4
An angle can be set to within ± 5 seconds of degree.
5
Firm Hinge Clamps reduce possibility of distortion.
6
Flatness 0.005 mm per 100 mm.
7
Tapped hole in top, sides & end, facilitate clamping.
8
Suitable for 0-45 degree Capacity. more...
![]()

Hysteresis graph Model BH 8000 is a high precision system for plotting Hysteresis Curves on both hard and soft magnetic materials.
It is simple to operate and does not need any special skills or knowledge of electronics. It plots a BH curve in less than 20 seconds.
The measurement of induction (B ir B-H) is accomplished by means of a search coil which can be
more...
![]()

High intensity magnetic grills that can be fitted in existing hoppers, pipe line or outlets or various equipment such as pulverisor and blenders.
In the standard type, the single row of magnetic elements is placed at specific distances and the multilayer type magnetic grills are mounted above each other in a zigzag manner for effective cleaning. In case of Self Cleaning type Magnetic Grill the Magnetic Elements can be cleaned just by pulling them out. As there is Separation Sleev over Magnetic Elements. The cleaning becomes very easy.
Features: more...
![]()

We design and develop precision engineered laboratory equipment such as magnetic hysteresis loop tracer for research applications wherein one can determine loop tracer. With our technological advanced apparatus allows automatic measurement on basic magnetization curve and magnetic hysteresis loop under static state of soft magnetic material, accurate measurement on static magnetic characteristic parameters such as initial permeability ‘I’, maximum permeability ‘m’, saturation magnetic induction Bs, remanence Br, coercive Hc and hysteresis losses Pu.
![]()

The range of magnetic press we offer are well known in the market for being lightweight magnetic press. These magnetic press reduce work fatigue, increase worker efficiency, and reduce time lost from accidents. Their lifting capacities are based on overall length of tool, size of sheets, scale on the sheets, if any, and flatness of sheets at the point of contact with magnet.
Key Features : more...
![]()

'HEM' series of research electromagnet are high power electromagnet have "H' frame construction, these are usually mounted at 45 degrees. The yoke and poles are forged from high grade iron. It is magnetically soft steel of low carbon content.
The pole pieces are screwed directly on the yoke which assures best mechanical stability. This construction allows optimum parrallity of the pole faces which is the major factor determining improved homogenity and reproducibility of field values up to highest field strength.
The 'HEM' series electromagnet's are available from pole diameter of 75 mm to 400 mm.
Continuously variable pole gap is available from pole diameter of 75mm to 150mm.
A wide range of pole caps are available for use with the basic magnet Especially for NMR and ESR, constant gradient caps for "faraday balance' exterments etc. For different application a wide range of support bases and measuring devices are available. more...
![]()

Industrial demagnetizers are manufactured from small coil for tool rooms to large units for medium and large components and assemblies. Semi-Automatic conveyorised units are also available.
more...
![]()

Our range of Magnetic Trap separators is tailor made for liquid/slurry materials and are meant for heavy duty bulky liquid line flow structures. The position of the magnet tubes is in such a manner that the captured tramp metal particles travel to the back of the tubes where these stay protected from wash off till the tubes are cleaned. The magnet cage is equipped with positioning lungs that assist with locating recesses in the body of the T-Trap avoiding rotation as liquid flows through the trap. With top access bolt on steel plate and seal, the T-Trap is simple to clean. Magnetic Trap is designed in such a manner that it can be easily wiped and installed. These are available in 7 standard line sizes which vary from 1 to 18 inches in diameter. more...
![]()

Features: more...
![]()

We manufacture, export and supply a wide assortment of Universal surface gauge, which is at par with the international quality standards. These are offered in numerous specifications and can be further customized as per the specifications of our clients. Moreover, our range of Universal Surface Gauge is offered at market leading rates to our clients. more...
![]()

Our array of lifting magnets is considered highly useful in industries like plastic, foundry and scrap dealing. We offer our range in round shapes of four sizes with diameters of 60, 80 and 100 mm. The magnet is provided with a cover to protect it from dust and pollution. We fabricate our range from highly coercive permanent magnets and the size of the magnetic plate is: more...
![]()

We are one of the leading manufacturer and supplier of Magnetic Instruments which are widely used to find out magnetic field. These instruments are famous for their durability, low maintenance cost and efficiency. We also offer customization on our range of Magnetic Instruments. These are available with:
more...
![]()

The range of suspension magnets available with us is useful for products that are carried by conveyor belts. These are largely recommended for products with high ferrous contamination and are applicable for processing bulk products such as sugar, coal, minerals, cereals, coffee, glass and culets.
Self Cleaning over brand type magnetic separator is recommended incase the frequency of impurities is too high. Thus, suspension magnets requires proper cleaning. more...
![]()

Our company has on offer
excellent quality drawer magnets, which can be customized as per the
requirements of the clients. The drawers have magnetic tubes on alternate
centres that allow the convenient movement of material.
Some of the other features of our drawer magnets are:
more...
![]()

Our range of Magnet Plates is widely used for
sloping chute applications; these assist in the removal of damaged metal and
ferrous contaminant. These are used in several industries, some of which are food, grain, Chemicals, Plastics,
Textiles, Cosmetics, mineral Pharmaceutical and cleaning highway shoulders. Magnet
plates help in the segregation of ferrous metals from fibrous, viscous or
liquid material. These are installed in rectangular, sloping chutes; a section
of chute should be removed for installation.
Salient features:
more...
![]()

We bring forth a wide range of precision straight edge, which can be used as master for axis straightness inspection in various machine tools, semi conductor related equipment, inspection and equipment. These precision straight edge can also be used as straightness standard during axis assembly adjustment and as inspection master for machine parts. The use surface has precision lapping finishing and the precision surface is 1 surface only. These precision straight edge are graduated excluding 20mm for both edges. more...
![]()

Features: more...
![]()

Our wide range of custom made magnetic equipment comprises of magnetic analysis equipment designed for specific applications. Incorporated with latest technologies, these magnetic equipment are designed for specific applications and are used for testing: more...
![]()

Our range of magnetic hangers are used to hang various items. It uses a series of super strong magnets. The magnets are spaced at 6" to 8" intervals along a custom made hanger. These magnetic hanger are very easy to install and use.
Key Features :
more...
![]()

Our range of magnetic rod are made from permanent magnets and are used
for removing metallic waste like ferrite powder and iron chippings from
different types of lathes.
Applications:
more...
![]()

AF Demagnetizer From MOLSPIN more...
![]()

Avail from us a wide variety of inspection steel parallels, which are ground to such close tolerances on four sides that there is no need to buy matched pairs for many common uses. These magnetic products can be used individually or matched with any other individual parallel at any time.
The technical specifications of our range are mentioned below: more...
![]()
Category Matches
Related Trade Leads
|
Offering to sell an excellent range of magnetic equipment :
-Elliptical Electro Magnet
-Circular Electro Magnet
-Rectangular Electro Magnet
-O... (Sell) |
|
We are offering a diverse range of electromagnetic equipments like:
- Magnet Chucks
- Magnet Lifter
- Magnet Filter
- Demagnetisers
* Featu... (Sell) |
|
|
Manufacturer and exporter of permanent magnet chucks, electro magnet
chucks, electro permanent magnet chucks, permanent lifter, electro
magnet lift... (Sell) |
|
|
Offering to sell magnetic equipment like magnetic separators, eddy
current separator, suspension electromagnet, lifting magnets, impulse
magnetizer... (Sell) |
|
We are offering wide range of magnets and magnetic equipments like:
- Rare Earth Magnets
- Over Band Magnetic Separators
- Liquid Line Magnetic... (Sell) |
Tender Notifications
B2B Newsletter Subscription