 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Forgings, Forging Parts & Supplies >
Machined Flanges
Products - 36
|
Machined Flanges |
Displaying 1-36 of Total 36 Products Found |
Products
We are the manufacturer and exporter of industrial flanges like industrial steel flanges, alloy steel flanges, stainless steel flanges etc. The range includes:
Material Type:- more...
|
Amco Metal
  |
|
Other more...
|
Rajdeep Metals
|
|
Our range of carbon steel and stainless steel flanges are made as per the JIS quality standards and are widely used in aeronautic & space industry, electronic components, mechanical parts and accessories.
|
Bluestar international , Mumbai
|
|
Threaded Flanges are confined to special applications. Their chief merit lies in the fact that they can be assembled without welding this explains their use in extremely high pressure services, particularly at or near atmospheric temperature, when alloy steel is essential for strength and where the necessary post weld heat treatment is impractical.
Threaded Flanges are unsuited for conditions involving temperature or bending stresses of any magnitude, particularly under cyclic conditions, where leakage through the threads may occur in relatively few cycles of heating or stress; sea welding is sometimes employed to overcome this, but cannot be considered as entirely satisfaction. We offer following varieties of threaded flanges: more...
|
Amco Metal
|
|
We offer following varieties of slip on flanges: more...
|
Amco Metal
|
|
These flanges are always used with either a stub end or taft which is butt welded to the pipe with the flange loose behind it. This means the stub end or taft always makes the face. The lap joint is favoured in low pressure applications because it is easily assembled and aligned. To reduce cost these flanges can be supplied without a hub and/or in treated, coated carbon steel.
We have for our clients a wide array of back up flanges that come with superior features like durability, high resistance and better efficiency. Offered in the shape of bell, these bell flanges are capable of increasing concentrated pressure on the tips of the teeth on the clinch ring.
This physical process helps in eliminating the possibility of any catastrophic buff failures. Durable and reliable, these flanges can be customized as per the required specifications. more...
Socket Welding Flanges - ANSI B 16.5 Class 1500 lb more...
This flange is slipped over the pipe and then fillet welded. Slip-on flanges are easy to use in fabricated applications.
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500# more...
We are manufacturer and supplier of companion flange.
Grade: Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II),2205 (UNS No. S31803), 2507 (UNS No. S32750).... more...
The excel flange made by us is not only corrosion resistant but designed under the supervision of experienced engineers and technocrats. This excel flange also has adjustable depth and strict inspection is done regarding their strength and critical joints. Our excel flange is also easy to install and available in various sizes and specifications.
Stainless Steel
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H, 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H.
Duplex Steel
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.
Carbon Steel
ASTM / ASME A 105.
ASTM / ASME A 350 LF 2.
Alloy Steel
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91.
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 160 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200
& ASTM / ASME SB 62 UNS NO. C 83600.
ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU more...
Presenting our range of precisely engineered DIN flanges which is manufactured in compliance with international quality standards. These steel DIN flanges are cost efficient, highly durable and reliable. Our steel DIN flanges is extensively used in various industries like engineering, construction, chemical, power plant and many more. Available in different dimensions our product, DIN - Deutsches Institut for Normung flanges can be availed at special specifications of bulk buyers. We ensure safe packaging and prompt delivery of the product.
We are engaged in manufacturing a variety of DIN flanges such as:
DIN 2502
DIN 2503
DIN 2527
DIN 2631
DIN 2632
DIN 2633
DIN 2634
DIN 2641
DIN 2642
DIN 2635 / 2636
DIN 2637 / 2638
DIN 2565 / 2566
DIN 2573 / 2576
DIN 2627 / 2628
DIN 2629 / 2630
DIN 2655 / 2656
DIN 86029 / 86030
Our range of reducing flanges is made of premium quality stainless steel. The reducing flanges are widely used in various industrial applications. Available in various configuration, these reducing flanges are suitable to connect tubings and pipe sections.
These stainless steel reducing flanges offer various advantages such as close tolerances, reliability and durability. Moreover, the SS reducing flanges are supplied in customized specifications.
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500#
Standard
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
DIN : DIN2527, DIN2566, DIN2573, DIN2576, more...
Our range of stainless steel ring joint flanges is highly appreciated for strength, durability, reliability, corrosion resistance and close tolerances. These stainless steel ring joint flanges conform to various Indian and international quality standards. Used in a number of industries, these stainless steel ring joint flanges are supplied in various dimensional specifications.
For specific requirements, we also custom design ring joint flanges in preferred specifications.
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500#
Standard
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
DIN : DIN2527, more...
We fabricate raised face flanges that need minimum fabrication work for mating them with flat face flanges. Our raised face pressure flanges are meticulously engineered and speaks a ton about our quality. Reputed in the market for accuracy, we also offer them at very competitive prices. These raised- face flanges are customized to the exact client specifications.
Slip On Flanges - ANSI B 16.5 Class 900 lb more...
This flange is used to blank off pipelines, valves and pumps, it can also be used as an inspection cover. It is sometimes referred to as a blanking flange.
Stainless Steel : ASTM A 182, A 240
Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500# more...
Lap joint flanges are used in those piping, which are fitted with the lapped pipe or with the stub end lap joint flanges. The lap joint flanges are highly suitable for those systems, which require dismantling for inspection and cleaning. Swivel flanges and align bolt holes have the ability in easing the erection of large diameter.
These lap joint flanges are similar to slip-on flanges with only difference i.e. they possess curved radius at the bore and face to accommodate a lap joint stub end. These are offered in full size range and are extensively used at all pressures.
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB
Class : 150#, 300#,400 #,600#,900#, 1500# & more...
We manufacture a wide range of precision made slip-on flanges that are fabricated from superior quality carbon steel. Our slip on flanges are best suited for various in low pressure applications. Accurately designed, these flanges do not require fitting or welding and hence saves investment on fabrication. Durable in quality, these slip-on flanges can be availed in different specifications.
Weld Neck Flanges - ANSI B 16.5 Class 300 lb more...
We manufacture blind flanges from carbon steel of the finest grade. The blind flanges are popularly used to close the ends of pipes, valves, pressure vessel openings and other channels where one end needs to be blanked off. Each of our blind flange proudly bears our quality pledge and is highly durable. Our blind flanges can be customized on size, thickness, or any other parameter that the client might feel suitable.
SAE Flanges more...
In various industrial applications, steel flanges are widely used. We offer our clients a wide range of H Steel Flange Correcting machines that is fabricated as per quality norms of international standards
We manufacture various types of flanges for various applications: more...
These orifice flange manufactured by us comes in complete
range of sizes and pressure ratings standard and dimensions as per the
major international standards. They are available in various types such
as weld neck, slip on, etc. screwed with facing FF, RF, RTJ and TG.
We offer various types of tapping in our orifice flange assemblies.
These are supplied to our clients as ready to install in pipelines
complete with studs, nuts, jack bolts, gaskets and drain plugs. more...
These can be offered in a wide selection of dimensions and alloys as required by our clients.Flange of different sizes for pipe line application made in S.G.Iron. more...
We manufacture backup flanges which are offered in the shape of bell, these bell flanges are capable of increasing concentrated pressure on the tips of the teeth on the clinch ring. This physical process helps in eliminating the possibility of any catastrophic buff failures. Durable and reliable, these flanges can be customized as per the required specifications. more...
We are
manufacturing a comprehensive range of Weld Neck Flanges which are available in
various sizes and dimensions to match the pipes. These flanges are mainly used
to connect pipes and are considered as an important unit to hold up mechanical
parts. Our Weld Neck Flanges are developed from superior quality carbon steel,
stainless steel and alloy steel, and are built in compliance with client's
requirements.
Specifications:
more...
We manufacture carbon steel plate flanges which are made from superior quality carbon steel, these flanges are durable in quality. Precision made, these carbon steel plate flanges are available in various specifications. more...
Fabricated with supreme quality of SS 304, 316, carbon steel, our plate flanges are durable and offered at industry leading prices. With the availability of a sound infrastructure and facilities, we are able to provide the products as per the desired specification, however we are offering them in various sizes from 1/2" to 24".
Application Areas: more...
We manufacture slip-on flanges that are fabricated from superior quality carbon steel. Our slip on flanges are best suited for various in low pressure applications. Accurately designed, these flanges do not require fitting or welding and hence saves investment on fabrication. Durable in quality, these slip-on flanges can be availed in different specifications. more...
We fabricate weld neck flanges that can be machined with the wall thickness of the flange having the same dimensions of the matching pipe. Used to weld the joint to provide extra strength, these flanges are usually used in high-pressure and extreme temperature applications. Durable and precision engineered, our weld neck flanges can be fabricated to the specific diameter or other dimensions.
We offer to our clients wide range of precision engineered flanges that are available in Buttweld Type Solid, Swivel, Socket and Blind varieties.
Our product confirms to the mounting interface as per SAE J518c, ISO 6162, ISO 6164 standards in high pressure and standard pressure series.
Our range of Hyloc’s flanges are also offered as per ISO6162 (SAE J518) and ISO 6164 standards. We also have the expertise to manufacture them in custom configuration in steel as well as stainless steel.
Types of Flanges, We offer:
more...
We offer wide range of Bearing Flanges, having different bore diameters and outer diameters. Designed to meet customers' needs they have low coefficient of friction and excellent resistance to wear. They resist corrosive chemicals, except for oxidizing acids, and does not absorb moisture. They are very effective & prevent metal-to-metal contact and can operate continuously. Bearing flanges are used in Centralised Lubricating Systems, which automatically pumps lubricants to required areas at preplanned intervals.
We offer casting of flanges which are used in external and internal rib or rim to offer strength as the flange of an iron beam or I-beam. This is also used as a connector and for railway industry and machine making industry.
Category Matches
Related Trade Leads
|
|
Engaged in offering machined flanges, forged flanges, industrial
machined flanges, steel plate flanges, machine forged flanges, stainless
steel fla... (Sell) |
|
Offering to sell lap joint flanges, raised face flanges, back-up
flanges, steel flanges, industrial flanges, carbon steel flanges,
slip-on flanges ... (Sell) |
|
We are offering wide range of industrial flanges like:
- Threaded Flanges
- WNRF Flanges
- SORF Flanges
- DIN Flanges
- PN Flanges
- Drillin... (Sell) |
|
We are offering huge range of forged flanges like:
- Long Weld Neck Flange
- Ring Joint Flange
- Drowing Flange
- Threaded Flange
- Reduc... (Sell) |
Tender Notifications
B2B Newsletter Subscription
