 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Dyes & Chemicals > Industrial Chemicals >
Lubricating Oil Additives
Products - 14
|
Lubricating Oil Additives |
Displaying 1-16 of Total 16 Products Found |
Products
GL 1188 is a premium anti wear hydraulic oil additive package. It is designed for providing excellent filter-ability performance as measured by AFNOR NFE 48-690 and NFE 48-691 procedures. Possessing very good air release properties, the additive is effective in meeting modern fluid requirements. It is developed for both high and low pressure hydraulic systems used for both industrial and mobile applications. GL 1188 is also recommended to formulate thermally stable paper machine oils which are capable of performing in fine filtration systems.
Formulations of the additive comprise of: more...
It has been specially formulated to give excellent antiwear and extreme pressure properties along with thermal, oxidation and rust characteristics (covering copper and copper alloys) to cover a broad range of applications of gear oil applications. It should be blended with highly refined base stocks to meet API GL4, GL5, GL2 and IS 8406 (1993) when blended in suitable base stock & desired viscosity grades.
Performance: Lubricants formulated with this additive package work for heavy duty enclosed gear drives with splash and circulatory type lubrication systems under heavy shock load conditions. It also gives dependable performance for continuous service at operating temperature upto 160 °C. It is also useful for antifriction bearings subjected to heavy shock loads. more...
We manufacture a wide range of rust preventive oil additives. Our range of rust preventive oil additives are discussed below : more...
With the support of quality testing laboratory, we offer varied lubricant additives such as cutting oil additive, gear oil additive, 2T oil additive (GL 2004) and many others. Entire array is formulated in conformity with the international standard. Our range of the additive is known for high effectiveness, eco-friendly and optimum pH.
Following are various other products under the category lubricant additives: more...
It has been formulated to give excellent hydraulic fluid characteristics to cover a broad range of applications. The product should be blended with highly refined base stocks to achieve the following desired results. more...
It has been designed for formulating heavy duty diesel engine lubricants meeting API CD/CF (Multigrades and Monogrades) performance levels. more...
CONS is soluble cutting oil additive and is a brown color, napthenic or paraffinic oil soluble, bio-stable semi-synthetic product. The additive is particularly recommended for all machining operations. It is available with recommended formulation 12% to 22% by weight.
Satisfactory emulsions can be formulated at 5:1 to 100:1 water to oil ratio in either napthenic or paraffinic base oils meeting the requirements of soluble cutting oil, IS : 1115.
Typical physical properties:
more...
Engine oil additive is a multifunctional additive used to formulate crankcase oils suitable for gasoline and diesel engines. GL 7521 is a highly detergent additive package which possesses excellent thermal oxidation stability characteristics. Premium quality additive is used to fulfill the requirements of lubricating oil for high output engines. The recommended concentration of GL 7521 is added to finished oils exceeding the engine test performance requirements for API Classification.
Recommended quantity is in part synthetic 20W-40 oil formulation for preparing crankcase engine oil to meet the requirements of API service category CC.
GL 7521 at optimized treat levels (based on specific engine test requirements) is used to formulate single viscosity and multi viscosity mineral oil based crankcase engine oils meeting requirements of API service category CC, CD,SC, EDL1, EPL1, ,MIL-B,EDL2, MIL-C, EDL3.
Typical Properties of the chemical include: more...
1. PHYSICAL AND CHEMICAL PROPERTIES
This is a brownish red liquid and non-toxic. The flash point is 190. It can react with strong oxidants.
SPECIFICATIONS more...
GL 4020 gear oil additive is a premium, extreme-pressure automotive additive used for multi-purpose such as manual transmissions, conventional differentials, rear axles, manual steering gears, final drives and all other passenger car and commercial automotive units. These require an API GL-5 or API MT-1 quality level gear oils.
Formulations of our range include: more...
We offer a extensive range of engine oil additives that are formulated under strict quality measures with advance technology. It forms a film on the metal surface and reduces frictions and wear of the engines. Thus engine oil additives helps in increasing the efficiency of the engine by augmenting its functionality. Further, due to the increased efficiency and functionality, it also avoids the cold start problem.
Users guide: more...
SC5D is diesel fuel additive which is to be added in 1:2000 proportion in diesel.
It atomizes the fuel hence improves spray quality by injector in combustion chambers there by improving power generated by same quality of fuels.
Due to atomization by additive the load on piston of Bosch Pump or rotary pumps decreases. Hence reduction in maintenance by ½” at bosch pumps can be achieved. more...
We manufacture fuel additive SK5L which enhances combustion and saves lot of money, for melting furnaces at your factory in SK5L is better suitable for best possible results
L.D.O. / F.O. is used as heat source in forging / heating unit. The cost of process in terms of fuel is very huge and rising. To optimize fuel cost SK5L is designed for specifically melting furnaces.
We assure minimum 7% to 10% Saving if S K-5 L is used as fuel additive. It has double effect of saving the money & saving the environment for our brighter future.
SK-5L Fuel additive is added in 1 : 1000 proportion & L.D.O. / FO for best results.
When we add the additive in above mentioned proportion the additive cracks the longer carbon chain of above fuels to smaller sizes hence surface area of combustion increase resulting in best possible combustion with stable exhaust. more...
Our teflon oil additives is used for superior shifting,
low noise and less fuel consumption. It also helps in easier gear changes by
providing better lubrication. Teflon oil additives helps in easier gear changing in cold, heavy
loaded and stiff ganging gear boxes.
Application:
more...
CVC Flusher-E (Engine Oil Flush)
CVC Flusher-E is a highly effective additive for flushing used oil. It removes carbon and varnish deposits of the oxidized oil and other contaminants from the gear boxes and lubricating oil circulation systems, pipelines and tanks.
more...
CVC Polylube (X) (Engine Oil Additive)
It is a colloidal dispersion of solid lubricants in a very high grade synthetic lubricating oil blended with anti-oxidant & dispersant additives. To all lubricants it can be used as- more...
Category Matches
Related Trade Leads
|
We are looking for the manufacturer of lubricating oil, engine oil
additives, gear oil additives, hydraulic oil additives etc.
Purchase Within: 1... (Buy) |
Tender Notifications
B2B Newsletter Subscription
