 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Scientific Instruments & Supplies > Sensors & Transducers >
Liquid Level Sensors
Products - 14
|
Liquid Level Sensors |
Displaying 1-15 of Total 15 Products Found |
Products
Alarm Delay : 10.0 Seconds
Electrical Ratings :
Max. Pressure : 5.0 Bar (72 Psi)
Fluid Temp Range : -40°c To +130°c
Environmental Ratings :
Max. Pressure : 5.0 Bar (72 Psi)
Fluid Temp Range : -40°c To +130°c
Sealing : Ip65, Ip67
In Coolant : 22 Pico Farad
Outside Coolant : 4 To 7 Pico Farad
Weight : 53g more...
|
Rico
  |
|
A device witch gives a signal and disconnects the engine primary coil winding on receiving signal from Oil Level Switch. more...
|
Rico
|
|
A device to give proportionate resistance output with change in fuel level. This has a built in low fuel indication arrangement. Suction pipe with filter, return fine connection and arrangement for mounting breather is provided.
Range : 5O to 330O
Voltage : 12V/24V, 300mAmp more...
|
Rico
|
|
A device to top up engine oil sump level automatically for unmanned application. The oil leveler has a low oil level Indication and thumb valve to restrict the oil flow automatically. more...
|
Rico
|
|
We are a trusted name in manufacturing switches which are made of premium quality stainless steel. These switches are best suitable for high temperature and pressure applications. The rugged construction of these permit these units to be used for reliable switching in a wide variety of chemicals, oils and water and in harsh environments. We stand as pioneer name in offering top mounted magnetic, side mounted magnetic, miniature side mounted with Stainless Steel / Polypropylene. Following are some of the essentials of our product:
• Use the largest float possible in one's application for the highest buoyant force, which delivers the most reliable operation
• Interface floats available
• Multi-Point Liquid Level Switches are available in both standard and custom configurations
Our range of displacer level switch are made of qualitative raw material and are used for level switching function in large tanks up to 15m, in turbulent liquids and even without steel pipes. The position our range can be adjusted at site as per the clients requirement. Moreover, our range works up to 200ºC temperature & 40 Kg/cm² pressure. In addition, the material construction of our products are MS, SS304/SS316 or PP and the enclosure protection confirms to IP56/IP65/Ex-proof IIA & IIB or IIC.
The unique features of our displacer level switch are as follows: more...
We specialize in manufacturing a wide range of high precision level sensors that vary from simple, single point, low cost level to specialized & complex level. Our sensors have the monitoring solutions for conducting and conditioning liquids, granules, powders and heavy solids.
Following are the type of level sensors manufactured by us:
more...
These conductive level sensors are manufactured as per the industrial standards keeping in mind the client’s requirements. These are made of high graded raw material with the use of highly sophisticated machines. The various features and specifications are as follow:
• Ideal for level control of conductive liquids
• Available with diff erent process connection (threaded or fl anged)
• Probe-length available up to 3 mtrs
• Probe materials mostly SS
• Even longer lengths of probes possible by joining end-to-end
• Suitable for drinking water, industrial water and sewage.
• Available up to 8 levels
• Temperature range up to 500.
Stainless steel has got collabration for marketing liquid level transmitters & indicators from M/S Xian Chinastar M&C Limited, The liquid level transmitters are rugged with water proof sealings, are explosionproof, are permeable & have hard wearing cables.
Liquid level transmitters & indicators are available in different ranges from 0-5m H20 to 0-500m H2o. Output are available 4-20MA on (two wire) and 0-5V on threewire, power supply required is 24V DC. The sensor has got over pressure range of 2.5 times the full scale value.
Operating temperature: 10 deg C to +60 deg C
Stainless steel micro Controller based level Indicators and controllers has got the following features:
more...
Electronic Data Sheet for Magnetic Float Swtiches
These self adjusting 'Smart' radar level measurement sensors are manufactured as per the industrial standards. They are tested on various parameters before being supplied to the clients. Moreover, we provide customized solutions to our clients for efficient and hassle free operations of our sensors. Our measurement sensors are used in Solids with Dust Powders.
The salient features are as follows:
more...
We offer Four level Indicator and Alarm that is being used in water tank indication like water level, water reserve tank full / empty etc. Following are some of the salient features of our range : more...
It is a compact, low cost, Loop Power level transmitter having 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tanks or storage vessels. These are having measuring range from 0.2 to 3 m for rod probe version.
These find their applications in the following areas:
Liquid Application:
more...
FITZER Hydrostatic Level Transmitter is accurate device for liquid level measurement based on hydrostatic pressure generated by liquid column.The column of liquid exerts a pressure at a given point proportional to height of the vessel changes, the pressure (head) also changes. This change give the proportionally output signal 4 - 20mA.This output signal is indicated on the local digital display unit in terms of engineering unit or percentage as required. APPLICATION • Liquid Level measurement in process Tanks / Vessels • Milk and Dairy storage Tanks / Vessels • Large water Reservoirs / Dams • Level measurement of Raw Juice storage Tanks / Vessels • Water level in river during monsoon FEATURES • Easy to install flange mounted or insertion type from top of the vessel, or submersible type can be hung from above the liquid surface. • Cost effective compared to other available products in the market. • Simpe insertion metallic hollow more...
We fully understand that all application & processes are different and so are there solution.We believe in providing customized solutions to the indigenous process.Our expertise team of Engineers visits core areas of application at your site to understand the practical problems & provide temperature measurement solution specially for your application.THERMECH can provide custom variations to the stock thermocouple for special needs. These variation include Lead wire length,lead wire insulation material,cold end connector type, sheath material, sheath length and sheath coating.
Category Matches
Related Trade Leads
|
We are offering excellent range of sensors like:
- Photoelectric Sensors
- Laser Sensor
- Level Sensors
- Capacitive Proximity Sensors
- Colo... (Sell) |
Tender Notifications
