Laboratory Testing Equipment

We have available with us a wide range of sand testing equipment which is offered at industry leading prices. Our range is customized as per the specifications of our clients and is designed and developed at par various industrial standards.

Specifications:


* Sand Testing Sieves, mesh no. 8, 10, 16, 22, 30, 44, 60, 100, 150, 200 & 300 with Lid & Pan 

Sand Specimen Tray


* Universal Sand Strength MachineGreen Compression Strength Machine: The machine consists of a spring balance with a platform suspended beneath & a metal cup in which the rammed test piece is placed

* A standard sample size of 2 x 2 height is tested on this machine
* Clay Content Tester (Rapid Sand Washer)for conducting compression & shear test in dry condition, manually operated
* Durably constructed
* It consists of three major parts, a substantial base on which is mounted a pendulum weight and a more...

It is designed for finding out the deformation and strains on 15cms. diameter and 30 cms. high cement concrete cylinders when subjected to compressive loads.
Salient Features
* Specifications : Consists of a frame with a bottom ring and a top ring with tightening screws to firmly clamp the compressometer over the cylinder. A dial gauge 0.002mm x 12mm is mounted on the upper ring and the tip of the dial gauge rests on an anvil. The zero of the dial gauge can be set by adjusting the anvil screw. Supplied in a wooden carrying case.
more...

Features :
* Self validation of RPM
* Easy to use input Keypad
* Operation by programme Menu
* 4 line LCD display
* Auto Parking of the baskets after the test is over
* Modular design for 2 simultaneous tests
* Real Time Display, Set Ellapse Time, Bath / Beaker Temperature on Screen
* Meets or exceeds all USP/BP specifications
* Illuminated bath for better visibilty
* Test Printout
* Keyboard Interface
Specially designed for testing the disintegration time threshold for solid dosage medication, as required by USP. It is easy tp set up and operate with advanced features.

To operate, the lab technician inputs the length of the run (hours to seconds) loads the tablets and presses the START key. This new version offers validation and programming parameters with its new micro-controller.

The C-TD 20 design allows easy installation and operation of the unit. The C-TD 20 is designed to meet the specifications of USP / more...

We manufacture lab testing machine and hydraulic lab testing machine as per customer specification.

ASIAN oxygen index apparatus consists of a test chimney made of borosilicate glass suppurated by the metallic base and hook with the help of the metallic pillar. The mixture of nitrogen and oxygen is released from the bottom of tube. The tube is filled with glass beads for mixing and evenly distributing the gas mixture. The specimen holder, which holds the test specimen, made of U shape and fixed at the center of the chimney. There is the porous screen mounted below the level of the specimen holder, to prevent falling combustion debris from fouling the gas entry and distribution paths. There is a digital temperature indicator cum controller with thermocouple for the measurement. A copper tube with suitable orifice for pilot flame is provided for igniting the specimen by inserting it from the top of the test column. The digital preset timer and buzzer is also mount in the instrument. Two rotameter with needle valve are provided to control and measure oxygen and nitrogen flow in the more...

The appartus is used for determination of flash point & fire point of petrolrum products except fuel oil with open flash 800c  specification. The apparatus consists of a cup heating plate to specific dimensions thermometer clip and test flame attachment with swivel joint for passing over liquid s fire point appurface in the prescribed manner, heater is controlled by means of different types of regulators fitted to the apparatus suitable for operation on 220 volts ac mains.   ** Design & specifications are subject to change without any prior notice. more...

* Air Entertainment Meter
* Blaine'S Air Permeability Apparatus
* Capping Set
* Cement Sampler
* Compaction Factor Apparatus
* Compression Testing Machine
* Concrete Test Hammer
* Flexure Testing Machine
* Flow Table
* Gillmore Needle Apparatus
* Hydraulic Jack
* Jolting Apparatus
* Kelley Ball Penetration Apparatus
* Laboratory Cement Autoclave
* Laboratory Concrete Mixer
* Laboratory Jaw Crusher
* Lateral Extensometer
* Le Chatelier Flask
* Length Comparator
* Test Sieves
* Platinum/Silica Crucible

* Longitudinal Compressometer
* Mortar Mixer
* Moulds
* Needle Vibrator
* Pulveriser
* Sand Absorption Cone And Tamper
* Shrinkage Bar Mould
* Slump Test Apparatus
* Standard Spatula
* Tamping Rod - Bar
* Thickness Gauge
* Tile Abrasion more...

The apparatus is used to asess the direct shear strength of solis on the specimens of size 60x60x25mm.
the equipment comprises of a loading unit with direct and lever system to apply normal stress of 8kg/sq. Cm.
Another one is shear box assembly comprising direct shear box in two halves for specimen and one pair of plain gripper plates. more...

Liquid limit device is designed mainly to determine the liquid limit of soil, the device is widely used in various industries. It is also used to determine the plasticity index of soil.
This equipment is helpful for classification of the potential properties of soil material.
The Liquid Limit of a soil is an index corresponding to the moisture content at which the soil passes from a plastic to a liquid state. This property is very useful to correlate mechanical properties of soil, such as compressibility and lower shear strength. Liquid limit is used in conjunction with the Plastic Limit to determine the Plasticity Index (PI) of a soil.

Liquid Limit Device and PI are used to determine clayeyness of a soil. Material with a high Liquid Limit and PI will be unsuitable for many construction applications. On the other hand, material with a relatively low Liquid Limit and PI is generally desirable in highway construction.

Specification of Liquid Limit more...

A combination tuning fork set that allows two demonstrations. Without the weights, one fork responds to the vibrations of the other, illustrating sympathetic vibration at distances. With the weights, one fork can be tuned 1 or more cps different, and both, when struck will produce beats of startling clarity. These are extra heavy (32mm wide) chrome plated steel forks mounted in hardwood resonators. Mallet included.

Spare battery for amplified ph and orp industrial electrodes, amphel series.
hi 740031 spare battery for amphel electrodes more...

We are a leading and renowned manufacturer & exporters of UV-VIS spectrophotometers, viscometers, polarimeters, digital melting point apparatus, digital deluxe ph meter, digital conductivity meter, digital flame photometer, auto karl fischer titrimeter, turbidity meters, colony counters, water & soil analysis kits, tds/salinity meters, potentiometers, dissolved oxygen meters, digital spectrophotometer etc. These have application in diverse sectors such as chemistry labs, biotechnology, food and beverages, mines and geology, plants and dyes, pharmaceuticals, sewage plants, textiles, etc. more...

The DISPAX-REACTOR® DRS is an inline ultra high shear dispersing machine used to achieve the finest micro-emulsions and suspensions. Extremely high shear rates (up to 190.000 1/s) combined with a fine generator geometry enable crushing of droplets and solids particles down to the nanoscale. The resulting product has long-term stability which reduces the need for emulsifying agents and thickeners. Because of the extremely high energy density, other dispersing aids can be reduced or possibly eliminated.

The DRS is usually equipped with a two-stage rotor-stator system (generators). The high tip speed of 40 m/s (10.000 fpm) often negates the need for a third stage. The DRS, designed with the same high quality features as the ULTRA-TURRAX® UTL and the DISPAX-REACTOR® DR, is especially well suited for challenging pharmaceutical applications.

The high shear dispersing machine DISPAX REACTOR® DRS 2000 is available in five sizes. The possible throughput (H2O) more...

Technical Specification:

Motorized Push Pull Load Tester

We offer an assortment of Motorized mush pull load tester that is wide in demand with our clients from all over the country for their wide applicability and reliable performance.

Specifications:


* 0 to 50 Kg / 0 to 300 Kg range
* Digital Read Out
* Preset Option for Load
* Push & Pull Test from Same end
* Sturdy & Accurate built fixture
* Can set Pick Load
* Motorized Operation
* More Accuracy in Load
* Designed as per IS standards

Power Req: 230V / 50 Hz
Dimension: 200 x 320 x 700 mm
Weight: 65 kg more...

  to obtain an accurate determination of the particle size distribution of the smallest fractions it is possible to apply the hydrometer method.   hydrometer readings are taken after regular intervals. Sedimentation time and hydrometer readings are used to determine the grain sizes according to the stoke’s law. The hydrometer kit, among other items, contains: a number of hydrometers, sedimentation cylinders, a thermometer, a glass container, a heating element with thermostat and stirrer, a soil stirrer and various accessories. more...

For specific gravity determinations. Each cylinder is 5cm. long and 13mm. diameter. Metals included are of aluminium, steel, brass and copper. Available in set or individually.
Set of four 13mm. more...

We provide a gamut of electronic laboratory flocculators (jar jest apparatus) that have fiber glass body. It has timer and digital rpm indicator which show 10 to 120 regulated rpm with 2% accuracy. Our precise gamut is available in various models like 2 stirrer/ 4 stirrer & 6 stirrer. We also provide in them customization as per the desired demand of clients.

Following are the salient attributes of electronic laboratory flocculator:

• Safe & sturdy
• Easy to handle
• Durable
• Accurate measurement
• Light in weight more...

Our range of SS Frame Test Sieve is available in joint less stainless steel frames in various diameters. However SS Frame Test Sieve can be modified as per the customer's specification. All Sieves are manufactured in strict conformation of the respective standards laid down as per BIS, BS, ASTM and Tyler specifications.

Construction:


* Frame of spun stainless steel
* Sieve cloth of stainless steel -SS
* Rigid design minimum weight
* Flat mesh
more...

We are manufacturer & exporter of carbon dispersion tester with following features:

Features

This analyzer is so designed for the purpose of observing the dispersed situation of the carbon black in a mixing compound rubber. The carbon black dispersion tester, made in gotech, can determine the dispersibility of the black carbon in rubber swiftly and exactly thanks to the exact optical lens, ccd camera of fine quality, special-purpose video capture card of high resolution and powerful software. Characteristics? Fcombined with ccd housing and main unit of pc. more...

Designed for shaking KAHN racks, bottles, flasks of different size by adjusting compartments. Fitted with heavy duty motor to work on 220V, AC 50Hz single phase. The rate of motion is adjustable mechanically by belt tension. Speed is fixed in same models to approximately 275.
    Size of Carrier    Strokes per Minutes    Motor    Body Type
    a)    20”x13”x4”    275    0.25 HP    open
    b)    20”x13”x4”    275    0.25 HP    covered
    c)    20”x13”x4”    150 to 250    0.25 HP    open
    d)    31”x17”x4”    150 to 250    0.25 HP    more...

High pressure permeability test can be conducted on different size of specimens using different cells. Cell is provided with a top plate and funnel at the bottom having gasket seals held in position through bolts & nuts. The concrete specimens are sealed in the cell to prevent any leakage along the side walls. Each unit is provided with chamber pressure gauge of 0-20kg/cm² and test pressure gauge of 0-15kg/cm². Pressure are applied using any available pressure line at the site or  compressor. Supplied without glass bottles & compressor.   

The various models are -


* Single Cell Model for specimen size 150mm cube           
* Three Cell Model for specimen size 150mm cube             
* Single Cell Model for Specimen Size 100mm dia x 100mm high     
* Three Cell Model for Specimen Size 100mm dia x more...

"Teknik"microprocessor hemoglobin meter

model          em-152m   
display                 16x2 lines  led display.
measuring rang      0-40 gm/di of hb.
zero adjustment     automatic .
dilution ratio           1. 251.
key board             soft touch 4 days.
calibration            automatic.
wavelength          530 nm.
detector          high sensitive silicon photodiode. more...

We are one of the leading manufacturing, supplying and exporting companies providing Capacity Testers. Our range of products is developed from supreme quality raw material, as per the industry standards. Few attributes of our capacity testers make them best choice for our clients such as durability, cost effectiveness and low maintenance. We provide these testers at most reasonable prices.

We offer high quality of Penetrometer Apparatus

Standard Items


* Stirrer Unit supports two test stations – 1 No.
* USP 1 method dissolution Basket with shaft – 2 Nos.
* USP 2 method dissolution Paddle with shaft – 2 Nos.
* 1 liter Glass Vessels as per USP – 2 Nos.
* Vessel Lids – 2 Nos.(fixed on stirrer unit)
* SS 316 Sampling Cannula – 2 Nos.
* Sampling Syringes (of 15ml) – 2 Nos.

Range Ambient to 50 oC (better than ±0.3oC) Test Types Single step dissolution, Multi step dissolution (1-12 Steps) Step Duration up to 99:59:59. more...

With wide and rich industrial experience, we are able to offer holiday detector hot all around the world.   we manufacture these products under the guidance of our talented professionals. it is made up of high quality steel, handle coated with rubber and strong plastic. this product is suitable for all types, such as fashion bonded epoxy, pipeline tapes and heat shrinks. these products are mainly used to inspect defensive coating . this product is available at a reasonable price. more...

Digital Floculator (Jar Tester) more...

This is for estimating the bearing capacity of shallow foundations in situ and for the design of flexible pavement. In the test procedure a steel plate is subjected to gradually increasing load and settlements of the plates recorded. Maximum bearing capacity is noted as that load at which the plate starts sinking rapidly.
Specifications: the basic outfit consists of : 50 tonne hydraulic jack with separate pumping unit fixed to it a 0-500 kn. X 0. 5 kn. Pressure gauge and flexible metal pipe 5mtr. Long - 1 no. Special ball and socket arrangement between the jack and the bearing plate - 1 no. Extension rod 12MM,. dia x 25cm long for taking dial gauge readings - 16 nos. Magnetic base with female thread on top for holding extension rod - 4 nos. Top end plate, 50MM, dia with male thread for fitting onto the extension rods and positioning the dial gauge plunger - 4 nos. Column 15cm dia x 25cm long with flanges complete with four bolts and nuts - 2 nos. Column 15cm x 50cm long with flanges more...

Glass Agencies are manufacturer of Compression Testing Machine Electric Operated under EROSE Brand.