 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Electronics & Electrical > Security Systems >
Inspection Systems
Products - 66
|
Inspection Systems |
Displaying 1-50 of Total 66 Products Found |
Products
We offer special tailor made Profile Projectors and Inspection Systems to suit the customer’s requirements in the following technical specifications: more...
Used extensively in various industries and fields. Our manufactured inspection table exhibits all the necessary characteristics, that should be there in any superior quality inspection table. Made of superior quality raw material, this table is long lasting, durable & easy to install at different locations. The specifications and special features of this product are given below
Inspection Kit
Welding Penetration Inspection System:
Salient features:
more...
We are offering Vial Inspection Machine Model No.AEVI – 240, which has four tracks made of nylon-6 rollers chain and has vial inspection is for inspecting vial for breakage & cap sealing & is carried out visually.
Features
more...
With 100% reversible, 100% of the tablets are held in reserve for inspection with inspection capacity about 7-8 lakh tablets per shift depending upon tablet size.
Salient Features:- more...
Our range of inspection fixture is widely used to hold a workpiece while it is being examined. Inspections usually involve comparing workpieces with desired measurements for accuracy and thus the inspection fixture that we offer are the best in the industry and serves the purpose of inspection of work pieces accurately.
more...
Our inspection solution system has been ergonomically designed for on-line checking of pharma codes printed on tubes, cartons, leaflets and labels. The check system is effective only when the bar code is successfully read and matches the target value.
The machine stops operating if there is a fault detected by the rejection system. It is provided with minimal and null sensor adjustment after changing a product and the configuration storage is made in a non-volatile memory. For safety reasons, the target is specifically entered or comes from a particular database.
The system features sensitive-variables, diagnostic mode set-up along with password protected access. The inspection system finds extensive application in pharmaceutical and pesticide literature, sales promotion material, booklets, diaries and many more. It exhibits the following features:
more...
Tablet Inspection Belt GMP Model SMS-12B. This is widely used in pharmaceutical industries before Blister Packing or Strip Packing.
Technical specification
more...
The MGS-01 is a multigauge inspection system. The System consists of a Main CPU unit, and Operator Interface Panel. It's modular construction allowsfor system up-gradation and easy maintenance. If all the options areselected total system will look like:
Main CPU unit Part No.: MCU1 more...
Tablet cum capsule type-tablet inspection machine is designed and used to inspect spotty, broken or not standard by vision capsule or tablet. This is done either by mechanically rotating the capsule over 360 degrees or turning the tablet from one surface to the other surface. The inspecting machine can easily take out any defective capsule or tablet and collect together.
Some of the features of our Tablet cum capsule inspection machine are as follows:
more...
We are one of the premier organizations involved in the manufacture of a wide range of Special Purpose Testing Inspection Machines. Our experienced and qualified team of designers and engineers understand the specifications provided by the clients and fabricate a range in accordance. Manufactured using high grade raw material such as, steel and iron, these machines are known for the corrosion resistance, simple installation and high performance.
more...
We are trusted manufacturers and suppliers of a wide range of Inspection Equipment that includes Vernier, Dial Instruments, Angle Plates, Boregauges Instruments and Micrometer Instruments. All the instruments are calibrated every 6- month to maintain quality CMM Range 1200 x 800 x 600 mm. Our range encompasses the following: more...
We manufacture and supply quality camera inspection machine that is used in various industrial applications. The model VS-1 is outfitted with a automatic primary seal and secondary seal assembly for various inspection. We can also customize the machine as per the specifications provided by the clients.
Technical specifications of Model VS-1: more...
The machine is designed as 2-track, single station fixed on a stainless steel table.We supply high quality of machines.We supply Tip forming dies of carbide material as per specifications of our clients.Machine is very rugged & realiable.The out put of our machine is between750~1000 pcs per hour. more...
We offer supreme quality Fibre Inspection Cum Rolling Machines that are widely demanded for various industrial usages. Configured with latest technological methods, Following are its relevant features:
High tolerance power
Sturdy structure
Energy efficient
Rust resistant
Avail from us broad range of precision
inspection bench center that are fabricated using finest quality
steel. Our range is known for delivering superior durability,
reliability & performance in the defined operations. These are
extensively used in general inspection works, metrology laboratories.
Co-axiability of centers: As per IS: 5980-1995 more...
The range of FPI equipment offered by us caters to the needs of aviation & aerospace, defense, railways, automotive, power plants, petrochemicals and all other large medium and small scale engineering industries. Our FPI equipment is available in portable yorkes, power source and power packs with bench unit ranging from 2000 Amps up to 6000 Amps.
Water Washable /Post Emulsifiable Fluorescent Penetrant Inspection Systems
“Designed As Per Aviation & Aerospace Requirements” more...
We provide a wide array of Vision and Inspection System that are equipped with high quality sensors and camera that are used in various industries for quality management. These Vision and Inspection systems conduct verification and inspection of moving parts and scan the bar codes. Further, we also customize these systems according to client specifications.
more...
Our Praka Vision FPP-510 is a floor model profile projector that has downward illumination and offers a large screen diameter for enhanced effectiveness. A template can be attached on its angled screen for comparison and tracing of the projected components image. more...
Inspection cum Reminding Machine more...
Visual Inspection Equipment with Clear VU Borescopes & Videoscopes Clear VU has a range of Rigid Borescopes and Flexible Videoscopes for variety of applications. Checking inaccessible locations and hard to see defects is made easy. The root side of welds in pipes can be checked with help of rigid Borescope up to a depth of 1 meter and tubes as small as 10 mm dia. Flexible Videoscopes can be used to check corrosion and erosion inside of heat-exchanger tubes, engine holes, welds on tubes and other inaccessible locations. The economical equipment can be used to take picture shots or video shots of any locations and record the same on the built-in micro-SD cards and down load to the PC. The images can then be sent over the internet to base station or the customer/ inspection agencies instantly. more...
Memory Repro's offset plate inspection stands can be used for correcting printing plates in order to ensure the print quality and to reduce the machine down time.# more...
The iSeries videoscope from IT concepts is a state of art inspection tool. The iTool weighs 2.5 Kg is powered with Metal Halide Lamp Technology, Compact Flash digital storage, 12V DC power belt option, on screen text generator, audio recording capability & many more at very attractive price.
We manufacture a precision engineered range of Eddy Current Inspection
System which is used for non destructive testing. Known for reliability
and superior quality, these are in wide demand across the globe.
It is used to detect metallurgical defects such as cracks, seams, hardness variations, plating variations and missing feature. more...
We provide a wide range of X-Ray Inspection System which is proficiently designed to detect dense contaminants like metal, stone, bone and plastic. Our range is also incorporated with the facility of simultaneous on screen imaging and operating adjustments. These can also be customized according to the application requirements of our clients. Further to provide them with maximum satisfaction, we also provide them installation, maintenance and after sales services. Some of the high end features of our X-Ray inspection system are: more...
We offer a wide range of inspection machine available in varying length of 5 & 10 feet. With output capacity of up to 150 – 250 containers per minute, our inspection machine is widely used in the pharmaceutical industry for carrying out the inspection process on various tablets/capsules.
Salient Features: more...
We manufacture and export a wide range of fabric inspection machines that is used for checking and mending defects in fabrics. These machines are also suitable for re-rolling & plating. Available in single side and both side checking models, fabric inspection machines can also be customized as per the specifications provided by our clients.
Features: more...
We manufacture and supply Hood Type Inspection Table by using best raw materials that are procured from the renowned vendors. Our highly precision hood type inspection tables are in great demand amongst the quality conscious clients from all over the market. more...
Our robust and light-weighted HI-SCAN 6040ds system are used for security checks in entrance areas. The HI-SCAN 6040ds is Department of Homeland Security (DHS) certified under the Anti-Terror Technology provision of the Safety Act. The salient features are as follows: more...
Fabric Inspection Machine
We cater to our clients by offering to them inspection machine that is made from best quality steel and is used across various industries. Offered at competent rates, we have the capability to deliver our products with customized specifications as per the requirements of the clients. Our machine comprises of following characteristics: more...
Visual Inspection Table.
The Retro-Check is a simple inspection system for travel documents and banknotes. The Inspection Kit is a portable set of handy verification tools specially composed and developped for everyone on the road.
Application
For verification of security elements, water marks, embossed stamps, hologram, kinegram, micro imprints, 3M Confirm foils, etc.
Features
- transmitted light
- side light
- retro reflection
- UV light
- magnifier 3,5x.
Vision Tester ESV 2240 (PCB Inspection System) more...
We manufacture and supply Hood Type Inspection Table by using best raw materials that are procured from the renowned vendors. Our highly precision hood type inspection tables are in great demand amongst the quality conscious clients from all over the market.
We engineer top class Inspection Machines offering fast & easy quality inspection at market leading prices. It is engineered using a low, fast drop-in loading bar and edge guide at the back of the machine. All speed controls are in one location for simple operation. With a higher speed of 200 m/m, we inspect the printed materials, reducing wastage of material & manpower. Other than inspection, it is also used for rewinding of rolls. more...
VVisionVMEX200 Multi Energy X-ray Security Cargo Inspections system for cargo equipped with the state of art x-ray imaging technology. It provides high resolution and ultra clear images for easy object identification with latest technology of computer control and image processing. The tunnel size allows inspection of large articles. It is ideal for security inspection at airports, customs, railway stations, seaports, wear houses, nuclear power stations, meeting locations, and other large sized goods.It can distinguish organic and inorganic materials by atomic composition of the material. It can detect explosives / drugs and realize threat image project function through adding different options. The operator can easily identify material with following coloring scheme:Organic material : Orange Inorganic material : Blue Mixed material : Green High density material : Red
Technical Specifications Weight Approx. 5000 Kg Dimensions 7852 (L) x more...
->Detection of dense contaminants like metal, stone, bone, plastic etc.
->Simultaneous inspection of individual products on multiple lane conveyors.
->Quick release conveyor belt for easy cleaning and re-assembly.
->Designed for safe operation (operator and product)
->Masking function to eliminate constant dense area.
->On screen simultaneous imaging and operating adjustment
->Variety of models for packed, unpacked, bulk and liquid products.
->Rejecters to every application.
->IP69K protection model available. more...
Large viewing glass with two way lighting system facilities easy viewing and inspection with a totally detachable body. CNC aligned rollers with shafts in perfect alignment for proper movement with fabric, complete with inverter drive for flexibility of inspection speed at the touch of a button. Convenient hand pendant for easy, immediate control to inch forward/backward. Emergency stop functions incorporated. The machine comes fitted with Japanese meter counter for cross checking as well as a fabric holding tray. The system consists of a variable speed AC motor with its attachable timer relay system. DC boards and electronics form an internal part of the system.
We manufacture qualitative range of special purpose inspection fixture, engineered using best quality raw material. Our range comprise of plate jigs, box jigs with the help of standard jig bushes. Our range of fixture comprise of special purpose bus body building fixtures and inspection fixtures. Our entire gamut is appreciated in the market for corrosion resistance and optimum performance.
Our range can be availed as per the specifications and requirements of our esteem clients. more...
Online Inspection Machine more...
All contact parts in stainless steel.and approved engineering plastics. Spinning of ampoule. Magnified view with back lighting Clear view of six ampoule
The solution-oriented work by TechnoLab has created new ways of optimising complicated test methods. The special equipment by TechnoLab enables clients to carry out material tests "in house" and to increase the quality of their products. Integration into the production process Sources of errors can be localised and excluded at an early stage by using TechnoLab's sophisticated inspection system for special test procedures. The modular design allows individual applications and effortless implementation. Here TechnoLab has closed a gap: test procedures can be integrated in research as well in production. Modular design The modular design concerns the different parts of the machine, options for the future and the separate use of integral parts. The principle of modularity covers the whole product range in order to guarantee versatile application and incorporation into the value creation process. Incorporated in your company as a key element, "TechnoLab solutions" contribute essentially to
We offer a wide range of Vision
Inspection System that are equipped with high quality camera and
other instruments. Qualitatively superior, these are widely in
demanded in the market and comprise following models:
FZ2
more...
Our range of offset plate inspection is used for correcting printing plates with a view to ensure high degree of print quality and also to reduce the machine down time. The sturdy powder-coated mild steel fabricated product enables us to ensure easy operation by the operator. The availability of counter balance system help in the accommodation of any size plate and allows easy movement of the plate holders during post press operations. The offset plate also has convenient hand resting surface for quick and safe error correction. TECHNICAL SPECIFICATION : more...
The machine is most ideal for visual inspection of tablets. more...
For inspection of filled bottles more...
Parameters that can be inspected more...
Meat, Chicken, Beef, Instant Food, Uncooked, Frozen, Ready to eat, Meals, Liquids, Syrups in Bottles, Tetra - pak, Cartons, Granules, Powders, Tablets (Medicine) Pouches are inspected for unwanted metals, broken bones, glass, plastic which might affect the quality and ruin the brand image.
Category Matches
Related Trade Leads
|
|
X-ray security inspection system baggage scanner:
* vision vmex-100100 is a multi-energy x-ray security inspection system equipped with state-oft... (Sell) |
|
|
Offering Vmcx container inspection system x-ray scanner system :
* Technical specifications :
- General features :
- Full image of the entire... (Sell) |
|
|
We are offering free fake note detector machine with following
specifications:
1.Counting Speed 900 note per Minute
2.fake Note Detection ( Com... (Sell) |
|
|
We are offering free fake note detector machine with following
specifications:
1. Counting speed 900 note per minute
2. Fake note detection (Co... (Sell) |
|
|
We are offering under vehicle search mirrors and inspection mirrors are
specialist units used worldwide in the fight against smuggling and
terroris... (Sell) |
Tender Notifications
