Products Directory > Industrial Supplies > Valves >
Industrial Valves
Products - 254
|
Industrial Valves |
Displaying 1-50 of Total 254 Products Found |
-
Products
- Description
- Supplier Information
Range : 6 mm to 150 mm NB
Rating : 150# to 1500#
Range Available : more...- Nippen Tubes
The ball valves are of One Pc, Two Pc and Three pc design. We also offer ball valves with electro-penumatic operation, fabricated out of bar-stock with mirror finish for application in pharmaceutial industry, triclover end, extended spindle and a host of other special features. more...
- Smita Industries, Mumbai
Globe Valves is a multi-turn valve made up of a body, a bonnet, a valve seat, a valve plug, and a valve spindle. The valve spindle may or may not connect to an actuator. The valve spindle moves the plug, or closing element, in a direction perpendicular to the fluid flow and into the valve seat. This type of valve is excellent for throttling and general flow control. We have designed in a way to ease operations.
more...- Met - Flow Controls Private Limited
These valves are used to divert the flow of the material from one direction to other direction. Variety of designs are available in this type of valves. These are available either in standard version or customized as per the application. Actuation Mechanisms Offered for Above Valves more...
- Milenium Technologies (I) Private Limited
(Hand-wheel Operated / Key Operated)
Body
• Brass Forged
• Wrenching size 31.5 mm
Spindle
• Stainless Steel AISI 304 (Non Magnetic) Soft Seating Type
• Width across flat of square 9.5 mm
Gland Packing
• Teflon
Working Pressure
• Aluminium Pressure Die Cast
more...- Jai Gopal Engineering Works Private Limited
We makes 2/3 way manifold valves, which are installed to measure, control, isolate, equalise, calibrate, drain, vent or differentiate the pressure of liquids & gases. We offer 2,3, valve manifold configuring remote mounting (pipe to pipe), direct mounting (pipe to flange T type & flange to flange H type) or panel mounting on to gauges, pressure switches or DP transmttter having 54 mm centre .
- Metalcons Engg. Works
We offer a wide range of micro valve, which are available with the following features and advantages:
• Flow is instantly redirected and so there is no leakage
• Unique over-center snap action provides quick response
• No lubrication require
• Suitable for vacuum service
In addition to this, our range is used in the following:
• Pressure switches
• Level controls
• Air switch to operate pneumatic tools and pumps
• Pilot operation of main valves
• Many other similar applications- C. D. Blower System
We design and offer globe valves in different patterns like straight patterns, angle patterns, oblique patterns and needle designs with a large variety of internal seat construction variants. These are manufactured from qualitative raw material and are used for flow control or on/off isolation of fluids.
- Inventum Engineers
We offer stainless steel products which are applicable to a wide range of manufacturing industries:
• Food & Beverage
• Dairy
• Chemical
• Cosmetic
• Pharmaceutical
• Vacuum
• Biotechnology
• Semiconductor
Our offered products are delicately built to comply with different standards, such as 3A, SMS, BS, and ASME BPE to suit customers diversity.
Furthermore, in order to fulfill various demands across industries, we offer stainless tube fittings with different surface finishes from 32 Ra to 15 Ra. With all these varieties and flexibility, we ensure our clients can always find what they want, and always get the products that are optimized for their request.
I. Material: 316L, chemical composition in accordance with ASME BPE product specification.
II. Tolerances: Acc. to ASME BPE product specification.
III. Weld Ends: Weld ends of tubes and fittings are prepared for orbital welding.
IV. Surface more...- PMS Engineering (International) Services
We supply Forbes Marshall products for various purposes. Our range includes more...
- Veermani Engineering Co.
The Tiger Manifold Valves are special purpose Valves. Which offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision machined to the most exacting dimensional tolerance to ensure perfect installation and application.Manifolds are functionally installed to control measure, isolate, equalize, calibrate, drain, vent or differentiate the pressure of liquids and grases. Manifold series offer optional 2, 3 & 5 Valves configurations. Which come in remote mounting (pipe to pipe), direct mounting (pipe to flange) on to the instrument center (54 mm).• Design: Two way, Three way & five way Manifold straight & T Type• End Connection: NPT / Flange• Material: SS316/ SS304/CS/Monel• Pressure Rating: 6000 psigFEATURES: • One piece forged body without welds for high more...
- Swastik Engineering Works, Goregaon
Needle Valves are extensively used to regulate the flow of liquids or gases at precise flow rates and come in various styles, qualities and forms like screwed and flanged form. Needle valves are widely used in various industries for many applications but especially where there is a need to regulate the flow of liquids or gases at low rates in order to block solids that come in the way or otherwise to make necessary adjustments in the flow as per the need. In short, these small valves are used where very precise flow regulation is required or to minimize the effects of fluctuations, as it is a flow control device.
- Virgin Engineers
Instrumentation ball valves are available in: more...
- Apurva Enterprises
We offer you a wide variety of valves for your various kind of industrial needs like: • Air Releasing Valves.• Globe Valves • Pressure reduction Valves• Butterfly Valves• Pressure Safety Valves• Check Valves• Gate Valves• Strainer • Water Level Gauge • Glass Cock• Blow Down• Steam Trap • Rotary Joint • Glass Needle Valves more...
- Soni Brothers
A check valve is a mechanical device which allows any kind of fluid to flow through it in a single direction. Labline check valves are soft seated valves planned to supply unidirectional stream with rigid shut-off to back flow. Our check valves are perfect to trim down flow resistance and pressure drop to the lowest possible level. They are completely engineered, lapped and screwed in seat to ensure tight shut-off and long life. The hinge less design ensures simple operation, overcoming many of the problems experienced in swing check valves.
- Majestik Engineering Works
Our range of valves is available in diverse designs and specifications to suit different industrial applications. These can easily handle high pressures and offer leakage-free operations. These are precisely manufactured by using superior quality raw material and can be availed in varied tolerances, finishes, shapes and sizes as per the specific requirements of our clients.
- Trimurti Enterprises, Bhosari
Reliable, high in precision and durable, our two piece ball valves are manufactured using superior quality raw materials to meet the set quality standards.Specifications: more...
- M M Engineers, Ahmedabad
We offer a range of other BVK Products: more...
- BVK Fibrotek Engineers Private Limited
We hold expertise in manufacturing motorized control valve, which have a electrical actuator directly mounted on control valve for controlling the flow of material. Available in various sizes, our range can be customized as per customer’s requirements.
more...- Capro Valves & Controls Pvt. Ltd.
We offer a wide range of gas train components made by Dungs. These components are used for pressure regulation and control of gas. Our range includes:
• Gas Filters GF
• Ball Valves
• Pressure Regulator FRS
• Gas/Air Pressure Switches
• Safety Relief Valves
• Gas Multibloc MB DLE
• Solenoid Valve MVD
• Double Solenoid Valve DMV D
• Burner Management Systems
• Manometers
• Valve Proving System VPS- Ecotherm Energy Systems
We manufacture varied range of needle valves, isolation valves etc. Some of these valves are Forged Needle Valve, High Pressure Needle Valve, Brass Needle Valve etc. The main features of our range of products are:
more...- Thermocon Enterprises
We offer superior quality needle valve which are manufactured with high precision to regulate the flow of liquid and gases in the gauges. Our range can be customized as per the requirement of our clients.
- Techwin International
We provide superior quality double bonnet assembly which are used in diverse industries. These can be fabricated in different raw material and in varied dimensions as per the requirement of our clients.
more...- A. R. Enterprises, Maharashtra
Our manifold valves includes:
1. 2way
2. 3way
3. 5way
with connection & mounting like
a. Pipe to Pipe
b. Pipe to Flange
c. Flange to Flange
d. Remote Mount
e. Base Vented
f. Base Mount
g. Direct Mount
h. Integral Mount
Advantage is reduce piping & compactness.- Manisha Enterprise, Mumbai
We are engaged in manufacturing and supplying of stainless steel fittings that includes: more...
- Vino Technical Service
Sub – Base Valves & Gang Manifold Valves:
The range of standard valves is available in this form which provides for base mounting, enabling repairs or servicing to be carried out without disturbing the piping installation. Its greatest usage is for automatic & electric actuators, but any configuration of standard valves can be supplied on a sub-base or a ganged manifold. more...- Fluid Power and Control Corpo
Our range of flame proof solenoid valves are used in gas flow applications. Being explosion proof also these provides optimum performance with complete safety. These are CMRI approved for their functionality and quality and are suitable for different gas groups. These are used in various industries lime oil & gas, nuclear power industry, Petroleum refineries and other similar industries.
- FluidTecq Pneumatics (P) Ltd
Empowered with sound industrial knowledge, we are able to design and manufacture industrial valves that perfectly match with the requirements of our clients. The range of hammer blind valves are suitable for accurate and speedier operations.
more...- Steam & Mining Industries
Solenoid Valves
General Specifications
• Types: 2/2 Way, 3/2 way.
• Material of construction: Aluminium / Brass / SS-304 / SS316 / P.P. /PTFE.
• Media: Air / Gases / Liquid / Vacuum / Haz Chemicals.
• Weather Proof as per IP-67.
• Flame Proof as Per IS 2148-1981.
Technical Specifications
• Direct Acting Range: 1/8” to 1”
• Internal Pilot Type Range: 1/8” to 3”.
• External Pilot Type Range: 1/8” to 3”.
• Diaphragm operated Range: 1/8” to 3”.
• Y - Type Angle Valve Range: 1/4” to 3”.
• Pressure Range: Vacuum to 70 kg.
• Operation: Normally Open / Normally Close.
• Seat: NBR / VITON / NEOPRENE / TEFLON / EPDM / SILICON.
• Temp: -40 degree c to 180 degree c.
• Coil Encl: Fly leads/Terminal Box/Plug-in-Conn.
• Coil more...- Pioneer Industries
We furnish a wide range of needle valves, which is used in different industrial applications. Manufactured using superior grade ferrous and non-ferrous metals, we offer these needle valves in standards and customized specifications. Our range of needle valves is available in following specifications:
more...- S. D. Industries, Mumbai
Our range of valves is manufactured to meet the specific requirements of our clients. These serve the diverse requirements of our clients and are offered at industry leading prices.
- Fluid Fit Engineers
We manufacture an extensive range of globe valves that is widely used for throttle services in oil, gas, petrochemical, power and offshore applications. We can design and develop these valves in different sizes and connection types, depending upon the clients requirements. more...
- Shreyas Engineering Corporation
Valve plates of different designs are manufactured as per OEM'S specifications made out of carbon steel, S.G. iron castings, graded closed grained cast iron etc. and properly ground to fine finish for immediate matching with the related components. Valve assemblies are manufactured in different designs viz., reed type, ring type, concentric type, channel type, dampened disc type. Valve assemblies are made out of stainless steel, carbon steel , S.G. iron etc. Valve plates are made out of flapper valve steel, spring steel. Valve seats and valve plates are micro lapping finish to ensure zero leakage.Valve Plate Assly: more...
- Amocon Enterprises
Hydraulic control valve is one of the complex derivatives of the conventional valves. We offer these in 5 types. The production volume offered by us is 48000. These are mainly needed in the S.G. iron shell molded castings. We also offer to customize these as per the specifications laid by the clients.
- Involute Technologies Private Limited, Pune
We are a leading manufacturer and supplier of fire safety valve components, which are manufactured using the high quality precision equipments. Some of the fire safety valve components that we provide are valve bodies, covers, seats etc.
- REC Engineering Products Private Limited
Our range of industrial valves are of various types and can be customized as per the customers requirement. We have ball valve, butterfly valve, knife edge gate valve, gate valve both solid & flexible wedge, globe valve, diaphragm valve, non return/swing check valve, dual disc check valve, single disc spring loaded check valve, forged steel gate valve, forged steel globe valve, forged steel check valve, angle valve, flush bottom tank valve, jacketed valve, strainers etc.
- Jyoti Metal (India)
The sluice gates offered by Makali Engineering Corporation share the same characteristics of versatility, durability, ease of installation and low maintenance.
They are made entirely of stainless steel, and have very high corrosion and erosion resistance, ensuring many years of operation with minimum maintenance. The gates are also lighter and easier to install than cast iron versions. We make as per BS/IS.
Range: 200 mm to 2400 mm- Makali Engineering Corporation
We manufacture ammonia valves and fittings that are available in flanged and screwed types. Made using premium quality raw materials they are highly durable and also cost effective. These fittings are used for various refrigration systems and are also safe to install as well as noiseless.
- Super Refrigration, Bombay Private Limited
We offer superior quality industrial valves. These quality forged and casted valves are available in two types such as butterfly valves, check valves, pulp valves, gate valves etc. We offer them at industry leading prices to our clients spread all over the world.
- M. K. Enterprises, Delhi
The zero dead leg valve structure comprises a conduit that forms a loop with three ports. Flexible metallic diaphragms are selectively operable to open and close the ports. These valves efficiently draw out the fluid that flows through them. The valve is automated and can changes its position into recycling mode, from third pipe part thus facilitates the flow of fluid in the pipe line.
The zero dead leg valves gives no dead leg in the line due to which their will be no growth of bacteria in the line.
The sizes are 0.5 inch to 2 inch.- Flocon Industries, Mumbai
We produce various kinds of valves as per specified requirements from our customers. Customized solution is highly used for this category of our products.
Valves that we produce are:
• Wedge gate
• Knife gate
• Globe
• Swing check
• Control Valves
• Tilting disc check
• Ball valves
Some of the salient features of our products in this category are:
• Testing and design standards of MSS SP81 and TAPPI TIS 405.8 are conformed
• Full Lug pattern.
• Tapping and drilling are done to suit 150 flanges of ANSI class.
• Heavy gate to increase gate and stem life.
• Wiper ring in stuffing box
• Impregnated asbestos free packing good for temperature upto 450F / 232 C and PH2-12 (Viton resilient seat good for temp upto 300 F/150 C
more...- Hy Tek Grant Instruments
REXROTH-Valves & Pumps more...
- Excellent Hydraulics
STEAM TRAP MODULE :
The Indoanushka make Ball Float Steam Trap Module is designed as a complete steam trapping solution for draining of condensate from any kind of process vessels. The module consists of a standard ball float type steam trap for continuous discharge of condensate, fitted with a Y-type strainer with inbuilt blowdown valve before the trap and a double window sight glass with cap nut arrangement after the trap. All assembled and factory fitted with flanged ends.
The strainer (YBDV) with blowdown valve – a prerequisite for the float trap helps you to have a choke free operation of the steam trap and simultaneously clean the online strainer without shutdowns. The double window sight glass (DWSG) fitted after the strainer helps you to monitor the functioning of the steam trap by helping you to see the discharge of the trap. The special capnut type arrangement of the DWSG ensures pre-stress free glasses for a longer life.
CLEAN AIR PACKAGE more...- Indoanushka
MOC:CI / CS(WCB) / SS 304 / SS 316 DISC: CI/MS/CS(WCB) / SS 304 / SS 316 SEALING RING : EPDM, NITRILE, SILICON, VITON SPRING : SS 316 SIZES : 25MM TO 600MM more...
- S J Engineers
We manufacture and supply a wide range of Multi Functional Body Valve, which are used in CNG,LPG cylinders. These can be customized as per specifications of clients.
more...- Rajendra Industries, Faridabad
We offer butterfly, control, gate, globe valves which are used for several mechanical purposes. These valves are manufactured in variety of specifications as per the usages of industries and we also provide customization to our entire range of valves.
- Charu Chemical Laboratories
We present highly durable blow down valves made up of higher quality bronze. These are especially designed valves enormously used to control a continuous flow of steam or water under high differential pressure. Their special design reduces the effects of high pressure steam or water sometimes containing rough particles. We offer these in various sizes as per client’s specifications.
- Rushas Engineering Company Limited
We are manufacturer and exporter of gate valve, ball valve which are made from high quality mild steel, stainless steel and brass. Our range of valves can be custom availed as per specific requirement of client. Available as M/S Valves, S.S. Valves, Brass Valves, Gunmetal, C.I.
- Automac Engineering, Mumbai
It is a special valve which is used to switch greywater between alternate destinations and is pneumatically operated.
Construction
Carbon Steel , Stainless Steel.
Application
Pneumatic conveying system.- Sincrowell Engineers
Self Acting, Pilot & Piston operated Pressure Reducing Valves are most popular for Pressure Reduction of Steam in all types of industries. The valve operates on Spring Balance principal. The downstream pressure is sensed below the Diaphragm which is balanced by the Spring Tension. Increasing Spring Tension, increases Outlet pressure and vice versa. Complete Pressure Reducing Station for Steam Service, duly IBR Approved is also offered which is designed, sized and manufactured in-house to the exacting requirement of customer.
- Samartha Engineers & Consultants
