 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Electronics & Electrical > Electric Fans & Coolers >
Industrial Blowers
Products - 156
|
Industrial Blowers |
Displaying 1-50 of Total 156 Products Found |
Products
We can supply blowers for different applications:
Clean Air
Airfoil Bladed Centrifugal Fans. These industrial fans with efficient airfoil blades are recommended for all supply air and clean air exhaust applications, as well as variable volume systems.
Dirty Air
Backward Inclined, Radial Tip and Radial Bladed fans. Rugged steel wheels are ideal for dust conveying or other industrial airstreams, erosive installations, and material handling applications.
Process Fans
Some fan types are designed for process applications such as boilers, incinerators, pollution control and high pressure systems. Various blade types are matched to application requirements.
High Pressure Fans
Certain fans are well suited or especially designed for combustion air, pneumatic conveying, and other higher pressure applications. A wide range of sizes and configurations assure a selection for every need.
Highly Corrosive
Fiberglass Reinforced Plastic (FRP) Fans, more...
|
Shimi Research Center Private Limited
ISO 9001:2000   |
|
Our centrifugal blowers are specially designed for an efficient functioning and come in a variety of sizes. These centrifugal blowers comprise of housing, impeller and drive arrangements. The housing consists of a sheet iron with circular inlet and rectangular outlet.The impellers precision balanced for a smooth vibration less operation. These blowers are fabricated in M.S., Stainless Steel, Aluminium,etc., depending upon the kind of usage. Apart from the usual material these can also be made from various other coatings like F.R.P, Hot dip, Galvanising, Epoxy, etc.
The mechanical construction of centrifugal blowers provides maximum efficiency with minimum conveying. The fans are manufactured using aluminum, mild steel and stainless steel of various grades. All the fans are tested for performance as per IS 4894 standard. The highlighting features of these centrifugal blowers are : more...
Our wide range of industrial blowers are fabricated as per AMCA 210 standards. In addition to this, we use mild/ stainless steel in our products and are aerodynamically designed in order to provide maximum efficiency to the blower. Further, for the required combination of air quantity and static pressure, we specially design the impeller and rotor. Apart from this, the shaft used in our range have 20% higher speed than the normal operating speed.
Available in a wide variety of designs and specifications our Industrial Blowers & Fans are high in performance and are widely used in different industries. These equipments reflect the innovative designs and sophisticated technology used in the fabrication our qualitative gamut.
Following are some of its outstanding attributes:
• Air washer and ventilation system
• Guaranteed performance and service backup
• Low noise and vibration
• Maintenance free
• Cost effective
We offer
comprehensive range of centrifugal air blowers manufactured with
finest quality of stainless steel, mild steel, mild steel rubber
lined etc. Designed with the latest technology, these centrifugal air
blowers are highly durable, reliable and results in excellent
performance. Available at industry leading prices, these air blowers
are high in demand across the globe.
Some of the specifics of our
centrifugal air blowers are:
more...
Centrifugal Blower have a provision of getting connected to Aspirator as well as exhaust pipes in order to carry out suction of dust and for connection to cyclones.
more...
The FD centrifugal blowers are carefully designed to meet ideal requirement for various industrial applications. Blowers are made in heavy duty construction with statically & dynamically balanced impellers which gives high Pressure and trouble free performance.
Available air delivery 500 cum/hr. - 15,000 cum/hr.and pressure upto 45 Inches of WG.
These blowers consist of completely backward curved, backward curved with self cleaning and straight blades.
Our company offers a wide range of FRP/GRP Air Blowers, which are known for their best performance and the strength they carry. These air blowers are best suitable for diversified applications. Our range of air blowers are withstand with extreme conditions and uses and support wide requirements.
Further, these air blowers are available in both standards & customize basis. more...
We provide our clients with a technically enhanced range of centrifugal blowers, draft fans, industrial centrifugal blowers, forced draft fans that is widely appreciated by our clientele owing to its trouble free operation and high performance. These industrial blowers are highly effective and functional and cater to the varied demands of different industries.
We are known in the industry for our excellent range of blowers that finds application in diverse industries. These are fabricated from qualitative material such as mild steel, stainless steel, and aluminum, depending upon the kind of usage of blowers. The blowers are equipped with housing, impeller, and drive arrangements, which result in their high performance and smooth, vibration less operation. We offer these blowers in various sizes to suit the varied requirements of the customers. These blowers are widely appreciated for the following features: more...
We manufacture an array of centrifugal fans for diverse industrial applications. Our fans and blowers are customized to meet the requirements of the customers. Our fans and blowers are available in class 1,2,3 and 4 constructions. The different types of fans that we present include: more...
Centrifugal fans comprises of hosting, impeller and drive arrangement. The housing is of sheet iron with circular inlet and rectangular outlet. Centrifugal fans are designed and manufactured in different ranges. The basic difference lies in the design of the impeller. The impellers are precision balanced for smooth vibration less operation. The fans can be fabricated in M.S., Stainless Steel, Aluminium, etc., depending on the kind of application. Various coatings such as F.R.P., Hot Dip Galvanizing, Epoxy, etc., are also available as an option.
We are offering a gamut of high volume air blowers that are designed to meet the specific application requirements of the clients. Our range of blowers are backed by computer software for design selection and detailed performance characteristics. These blowers are provided with low pressure ventilation fans with very high air volume. These are also offered in various type of shaft seals to avoid leakages of gases. Further, our range of blowers have well-balanced impeller for vibration free operation. These carefully designed blowers help in preventing noise pollution.
The ring and side channel blowers we offer are precisely designed for perfection. These blowers have gained huge reputation in the market for their exclusive features. Available in various specifications, these can also be customized as per clients’ demands.
Technical Specifications:
more...
We manufacture Double Inlet blowers with a spiral housing which is open on both sides. Double inlet blowers are mainly used for high volume supply air, variable air volume systems and many industrial supply and exhaust systems. Our product features are high efficiency hollow bladed airfoil wheel, smooth steep pressure curve suitable for VAV systems, consistent air flow over and tough bracing to survive possible damage from air flow variations.
We offer a wide range of pedestal drive blowers, which are manufactured using superior grade mild steel sheets and plates reinforced with angle iron frame. These range from 0.5 HP to 20 HP, 3000 Rpm, with suitable pressure & CFM as per client's requirement.
Some of the construction features of our range include: more...
Our company offers a complete range of standard air blowers for flow rates from 25 cu. mt./hr through 10,000 cu. mt./hr in single stage and up to any capacity in parallel configuration for working pressure range up to 1kg/sq. cm. These are available as total package units, ready to install or as bare blower units for replacement.
The details of Standard Design and Constructional Features of our range of portable air blowers are:
more...
We are expert in manufacturing FRP blowers which are widely used in various application areas. These blowers are made of high grade quality of raw material procured from certified vendors. The excellent quality of material makes these blowers withstand extreme weather conditions. Owing to the quality standards, these products are repeated in demands in domestic and international marketplace.
Features:
• Sturdy construction
• Competitive price
• Safe and sturdy
• Rustless coating to protect the exterior steel components more...
We offer
our clients with a precision engineered assortment of blowers that are built
using superior quality fiber reinforced plastic (FRP). Applicable in diverse
industries, these blowers are especially designed to handle harsh fumes, vapors
and gases. We also make use of fiberglass and polyester in manufacture of our blowers
and specially coated with rust-less coating making them possess the following
features:
more...
We undertake complete projects for designing, manufacturing and installation of blowers in PP FRP and other corrosion resistant grade. These blowers are mailable in different capacities ranging from 300 CFM to 30,000 CFM. We also provide cost-effective customization of the blowers to meet the speciofic requirements of the clients.
Specifications
more...
We are a well established manufacturer and exporter of best quality centrifugal type blowers that find application for low pressures, normally, less than 3.447 KPa. These blowers are made using quality approved materials, which impart them maximum durability. Our blowers are provided with two types of Blade Fans:
• Straight Blade Fan
• Backward Blade Fan
Application:
These blowers find application for:
• Ventilating Work
• Moving large volumes of air & gases through ducts
• Conveying material suspended in gas stream
• Removing fumes etc.
Our blowers are in diverse industries, such as:
• Oil industries
• Dye industries
• Pharmaceutical industries
• Food processing industries
Technical Specifications:
• ƒÞ Volumetric Capacity : 100 M3/HR TO 1,00,000 M3/HR
• ƒÞ Negative Pressure : UP TO 400 MM WC
• ƒÞ POWER : 01 HP TO 100 more...
We manufacture and supply a wide range of motorized rotary soot blowers that is used for economizers and low heat zones of boilers. Our range is known for longer serviceability and sturdy construction.
Some salient features of our motorized rotatry soot blowers are: more...
We offer our clients V-belt drive blowers in the configurations of Double Inlet Double Width (DIDW). These are developed with advanced technology assistance and are widely appreciated for their excellent performance and durability. We can also provide these blowers in various material of construction like mild steel, stainless steel, aluminum, ms rubber lined and as per specific requirements of the clients.
We are manufacturing and supplying Biogas Blowers which are used for handling bio digester and landfill gases. These ensure safety for these kinds of explosive and corrosive application. Our blowers are manufactured as per the industrial standards by using advanced technology and quality raw material. more...
Rubber blower designed to remove dust & particles from the delicate part of glass equipments as well as soft equipments. more...
Our blower machines that we have are efficient in performance and find their usage for creating special effect. These machines come with high performing motors. With durable quality rotation blades, these machines are used for creating warm or cold air effect. The specification include: more...
We offer medium pressure centrifugal systems that are used widely for the supply of air for combustion systems, cooling, drying, conveying, glass blowing burners, cupolas and other industrial applications. The range of diameter of impeller often required flow and pressure condition. Direct drive impellers have the following features: more...
“VINDI” make Water Cooled blowers are similar to air cooled type in construction and performance except in the change of cooling arrangement. In water cooled blowers the main casing & side plates have water jackets around them, where water is circulated, which dissipates the heat generated and keeps the internals cool. Water cooled blowers are recommended for applications where discharge pressures exceed 7000 mm WG, since it is essential to dissipate heat for efficient working and long life of the bearings and seals.
Our blowers have a unique design of single inlet & single outlet for cooling water and no cumbersome water pipe connections externally. Internal circulation of water to various areas is through inbuilt channels. This unique design makes the operations very simple, yet very effective. The cooling water inlet is at the bottom so that the water rises up against gravity, reaching all the corners before it comes out from the outlet. The flow rates of more...
We provide high quality pollution control equipment like:
more...
We manufacture and export a wide range of F.R.P. blowers that are available in sizes of 15”, 18”, 20”, 24”. Our highly précised FRP blowers are considered best for corrosive Gas handling up to 2000CFM. These consist of a dynamically balanced impeller that is fitted directly on a vertical shaft and is driven by flange-mounted motor. more...
Our centrifugal blowers are specially designed for an efficient functioning and come in a variety of sizes. These centrifugal blowers comprise of housing, impeller and drive arrangements. The housing consists of a sheet iron with circular inlet and rectangular outlet.The impellers precision balanced for a smooth vibration less operation. These blowers are fabricated in M.S., Stainless Steel, Aluminium,etc., depending upon the kind of usage. Apart from the usual material these can also be made from various other coatings like F.R.P, Hot dip, Galvanising, Epoxy, etc. more...
Principle of Operation :
These Industrial Blowers like Turbine Blower, Industrial Regenerative Blower, Side - Channel Blower consist of a dynamically balanced impeller which revolves in a stator cum - compression chamber having very fine clearance between them. The impeller is fitted directly on a vertical shaft and is driven by flange mounted motor. Both the suction and pressure openings are located on the outer perifery of the stator to reduce the impedence to air flow thereby developing vacuum and pressure.
Features : more...
We manufacture a range of blowers that are fabricated from superior quality raw materials like mild steel. These blowers consist of dynamically balanced impeller. These impellers revolves in as stator - cum compression chamber and have very fine clearance between them. These impellers are fitted directly on to the motor. The suction and pressure openings on the outer periphery of the stator helps in reducing impedance to the air flow thereby developing vacuum and pressure. Our blowers do not require any lubrication. Having no friction, these air is absolutely oil free. Compact in size, our blowers come with silencer that ensures low noise.
We are catering to the requirements of HVAC system
manufacturers while offering a wide range of Industrial Blowers. Customized as
per the specifications of our clients, these Industrial Blowers are supplied along
with scrubbers which are fabricated using high grade raw material such as PP,
PVC, and FRP.
This entire range comprise air blowers, centrifugal air blowers,
commercial air blowers, industrial centrifugal blowers, industrial cooling
blowers, HDPE/P.P blowers and FRP blowers used for handling corrosive gases and
fumes. These non-corrosive industrial blowers are available in various shapes
and designs and these are used in tyre applications.
more...
Our array
of Centrifugal Blowers is available in different modes like High Pressure
Blower, Medium pressure Blower, low pressure Blowers. Made from finest quality
raw material, our precise gamut is extensively used in various industries like
Chemical, Pharmaceutical, Biotech etc for cooling the entire room at the time
of material combustion. These can be customized as per the requirement of
clients.
Some of
the salient attributes of Centrifugal Blowers are as follows:
more...
Tubular heating elements/ tubular heaters with or without heat dissipation fins, mounted on rectangular plate forms a heater bank. Heater bank mounted on frame or duct duly provided thermal insulation.
Application:00
more...
We offer trolley mounted supply cum exhaust air-blower which is highly appreciated for its high efficiency and environment friendly features. It has the air flow capacity of 1000 m3/hr to 60000 m3/hr and up to 175mm of static pressure. The trolley mounted supply cum exhaust air-blower includes mixing chamber with aluminum dampers and has the filter section with: more...
Special designed textile machine heat exchanger most effective hot air circulation system and unique nozzle make high efficiency of drying. Circulation fan if of well balanced radial propeller and volume of hot air with quit rotation. Repairs checking & cleaning are easy thanks to big opening doors on both side of chamber and able to be moved up and down nozzle for easy maintenance. more...
We offer our clients with well engineered, high
efficiency, Low noise air moving industrial centrifugal blowers which are manufactured with latest machineries
to meet the requirement of process / clean air handling applications in Foundry,
Power Plants, Engineering Industries and Cement Producing Plants. These are
provided with single and multiple (Parallel or series operation) impellers to
suit wide range of air discharge and pressure development combinations. The
salient features are as follow:
more...
Forced Draught Blower:
These are generally direct type wherein the casings are fabricated from heavy gauge mild steel sheets and structurals.The impeller is carefully balanced, statically and dynamically to obtain a perfectly vibration free running. The inlet to the blower is generally open to atmosphere but provided with safety cover. Easy removal of the impeller for maintenance purposes is felicitated by providing large inlet cover on the inlet side. Available in various sizes and capacities.
Induced Draught Blower:
These are high volumetric but low pressure generally used to handle hot gases or hot air. Below 80 deg cent, the blowers may be direct driven type, but above this they are either belt driven or driven through flexible couplings. It can be supplied in M S and S S construction. Mild steel is suitable for working up to 300 deg cent, whereas with SS construction, they can be used up to 600 deg cent with V-belt or flexible drive, more...
Developed using sophisticated technology, our extensive array of single inlet blower are high in performance and offer trouble free service. Precision engineered to perfection, these blowers cater to the requirements of diverse industries. Owing to use of quality approved materials, our blowers are long lasting and offer better functionality. We also offer them in standard as well as customized forms to provide the clients maximum satisfaction.
Specifications
Blower Diameter 225mm /250mm
more...
Trim handling is a simple and almost invisible process in most international plants but here it is messy, labor intensive and costly. Our trim handlers are convenient, cost effective (muscle power is about 20 times costlier compared to electrical energy) and require no manual handling. They save on messy Trim handling and pulp it instantly
Our standard trimmers are rated:
more...
We manufacture
industrial blowers using proven technology and quality approved raw
material thus delivering blowers with durable performance. Blowers
manufactured by us are suitable for cupolas cooling, furnaces and
refrigeration systems and also for pneumatic conveying of exhaust
gases, fumes etc.
We offer blowers
of Medium Pressure & High Pressure in different models. Our
blowers can be custom developed in order to meet client's specific
application need. more...
We offer high quality range of industrial blowers, known as root blowers
made from mild steel, aluminum or stainless steel construction. These root blowers are available for different requirements and industrial
applications.
Some of its unique features are:
more...
We are available with industrial blowers with housing for diffusers that are in high demand worldwide. Over the years we have been able to garner the trust and reliance of our clients offering an unmatched quality range that breathes in quality, durability and flawlessness.
Made of 16 SWG sheet our exclusive gamut of industrial blowers includes the following essential features: more...
These are virtually maintenance free as these perform neatly without causing any friction or vibration. The moving parts neither touch each other nor have any contact with its stationery body, therefore require no lubrication at all and generate oil free Vacuum & Pressure. Their compact design & rugged construction supplemented with trouble free performance have made them cost effective as well.
Based on revolutionary, Innovation, Promivac Blowers are worthy substitutes of their closest rivals, the conventional oily and bulky Roots Air Blowers, for application where large and forceful suction and pressure capabilities are required such as in Vacuum conveying, Vacuum Cleaning, Material Handling, Food, Drug and Chemical Equipment, Fume Extraction, Soil Vapor and Smoke Evacuation, Plastic Forming. Medical Equipment, Bag Making, Packing Industries and so on.
These are not only comparatively lighter, cheaper, neater & quieter, but also happen to be maintenance and more...
HUMIDIN Centrifugal Blowers are multi - bladed and designed to deliver large volume of air when operating at the lowest possible peripheral speeds. Ideal for heating, ventilating, air conditioning and industrial process duties, they can be used for all type of air-moving applications where relatively clean air is moved. Ruggedly built, quiet operating and dependable, these blowers would perform year after year with a minimum of attention.
more...
An important member of positive displacement blowers’ family, these twin lobe blowers are available in 2 types Air Cooled series and Water Cool Series. These twin lobe blowers can be resembled with air cooled series as far as performance is concerned. The only difference lies in the water jacket around them which dissipate the heat which is generated on account of high compression thereby maintaining tolerable temperature of all the blower components. Our blowers are available for a volumetric flow rate ranging from 8CFM (13.5 m3/hr) and 5079 cfm (8623 c.m.h.) pressure ranging up to 14.2 PSI (1kg/c.m.sq.). These blowers are widely used for Bio gas application where these pump bio gas to boost gas pressure for meeting required burner input demand. The key features are the following:
more...
We are engaged in offering a wide range of Impellers that is fabricated using premium raw materials. Used in various engineering industries, these impellers are used for reducing cavitations and enhance in the speedy performance. Some of the features of these impellers include: more...
Category Matches
Related Trade Leads
|
|
We are offering the best quality of high pressure blowers & systems,
which includes :
-Industrial Axial Fans
-Industrial Centrifugal Blowers
-I... (Sell) |
|
We are offering wide range of side channel blowers having following
features like:
- High performance
- Easy installation
- Easy to operate
- ... (Sell) |
|
|
Offering fans and blower design software with following specifications:
- This package covers all types of fan like id, fd, sa etc. - An ideal ra... (Sell) |
|
|
"Raico Engineers,Mumbai" manufacturer and exporter of air powered
equipment, industrial blower, air blade, ultra low pressure regulators,
activated... (Sell) |
|
We are offering diverse range of top quality blowers like:
- High pressure blowers
- Suction pressure blowers
- Process gas blowers
- Bulk veh... (Sell) |
Tender Notifications
B2B Newsletter Subscription
