Products Directory > Scientific Instruments & Supplies > Testing Equipment & Machines >
Hydraulic Testing Machines
Products - 55
|
Hydraulic Testing Machines |
Displaying 1-41 of Total 55 Products Found |
-
Products
- Description
- Supplier Information
We manufacture hydraulic lab testing machines that are designed to meet the customer's need for a compact and high efficiency material life tester. These testing units operate very easily and delivers accurate results. Customer supplied electronic logic circuitry and motor starter are incorporated into the assembly.
- Flowmech Engineers Private Ltd Delhi
These machines are made up of good quality raw material and can be customized according to the clients’ specifications.
Production testing machine conducts the following tests: more...- Autotest Mechanisms Pvt. Ltd.
We offer laboratory beater (PFI Mill Type) which is of high precision & best beater for processing pulp prior to formation of hand sheets, in order to determine the behavior of pulp when subject to definite beating schedule. This beater is ideally suitably for research purpose and routine checking of small quantity of pulp in laboratory. Capacity 5 – 40 gm of oven dried pulp with consistency of 5 – 50%, beating time 2-10 minutes. Beater roll and bed plate independently driven. Roll revolution counter, Variable beating pressure and variable peripheral speed beater roll/housing.
- Universal Engineering Corporation, UP
Our hydraulic lab testing machines are designed to meet the customer's need for a compact and high efficiency material life tester. These testing units operate very easily meeting the requirement to be ultra quiet for test lab use. The unit delivers accurate results. Customer supplied electronic logic circuitry and motor starter are incorporated into the assembly.
- Flowmech Engineers Private Limited Delhi
We manufacture hydraulic lab testing machines as per customer specification.
- M/s Flowmech Engineers (P) Ltd.
Servo (Dynamic) hydraulic universal testing machines which are used in a variety of tests like tension compression flexure fatigue (low cycle fatigue / high cycle fatigue / fatigue crack propagation ASTM E647), fracture mechanics (K1c per ASTM E399, J1c, CTOD per ASTM E-1290), damping properties and vibration testing.
Our test systems are designed for conducting tests at ambient temperature, elevated temperature (high temperature fatigue characterization) and low temperature.
Test speed range slow strain rate testing (typical of corrosion interaction)(1 x 10 -7 /s strain rate) high strain rate testing (flow deformation studies).(150 /s true strain rate)
The testing machines are fitted with servo-controlled pumps that come in two versions: hard-wired autonomous control with electronic setting of operating high and low pressure. Operating pressure is set with the convenience of on-screen graphics user interface.
Technical features of our hydraulic materials test systems more...- Gatha Enterprises, Pune
Testing Equipments more...
- Sant Engineering Company
We also offer Special Purpose Machines and test equipment that meets the needs of various processes and testing methods. These are custom-designed in order to satisfy our client's needs. We have developed Fatigue Testing Machines, Stress Concentration Machines, Filter Testing Machines, Filament Winding Machines, different Hydraulic and Pneumatic Machines, Spring Testing Machines and others.
These machines are offered with total electrical/electronic control panels having computer interface to view online graphs of the processes.- Milenium Technologies (I) Private Limited
We have provided innovation, quality, and value in our products and services to the corrosion testing industry. Our line of test chambers comes loaded with standard features that make running accurate, repeatable tests easy.
Some of the various types of environmental test chamber machines are: more...- Autotest Mechanisms Pvt. Ltd.
Semi-Automated Sheet Former – For producing the pulp sheet rapidly for physical strength tests. In comparison to the standard sheet former, this apparatus reduces the time factor, increases the output, improves the reproducibility, reduces the operator’s influence and fatigue without detriment to the final product. Stirring in the apparatus is an automatic function by use of compressed air, whilst couching is effected by means of pneumatic fixture. Suitable for producing sheet size: 165 mm diameter.
- Universal Engineering Corporation, UP
We manufacture and supply precision engineered filter testing machines for testing the performance and accuracy of different types of filters. Manufactured using the latest sophisticated techniques and with no compromise on quality, our filter testing machines are easy to operate and ensure consistent superior performance without any defects. Available in various specifications and capacities, our filter testing machines can be customized to suit the unique.
The test rig has been suitably designed for: more...- Autotest Mechanisms Pvt. Ltd.
It is suitable for testing compression springs, tension springs, torsion springs and leave springs, clutch plate assemblies, leaf springs, rubber mounts, and diaphragm springs.
- Autotest Mechanisms Pvt. Ltd.
This first rig is used to check the elongation of the chain.The machine capacity and size may vary depend up on the load meter.
- Alfa Hydro Machine Tool
We manufacture and supply precision engineered CBR test apparatus that are known for their flawless performance, ease of handling and long service life. The apparatus is used worldwide for testing soils and mix materials. The main features of our CBR apparatus include:• It is easy to operate• Available in different capacities• Good load speed more...
- Universal Scientific & Testing Equipment Co.
We also offer various SPMs that are extensively needed in automobile industry in different applications such as leak testing, hydraulic testing and many more. These SPMs are fabricated from superior quality raw material and modern technology in order to ensure efficient work out put that sufficiently cater to the needs of industrial users. We take utmost care in ensuring smooth operation, durability and quick performance of these machines at our end that fulfill every needs of the clients.
- Reliance Engineering Company
Our range of reciprocating pump test rig is fabricated to offer great performance. It has a reciprocating pump that is mounted ion the sump tank. Being recirculating type, its suction has vaccum gauge and discharge is provided with pressure gauge. It is a self controlled unit and contains all inbuilt features. To approximate the performance of the pump, input of motor and output of pump can be calculated. It is done at variant speeds and different heads.
- Contech Micro Systems
SIMPLETEC Portable Hydraulic Power Units with air operated piston pump gives pressure up to 2000 bar. It is compatible with hydraulic oil and water. Various models are offered with system pressure of 400 bar, 600 bar, 1000 bar, 1500 bar and 2000 bar.
- Simpletec Automatics Private Limited
We are sourcing testing equipment from Dynisco brand for different industries. The varied products that we are offering under this brand name are: more...
- Federal India Trading Company
We offer superior quality SPM (special purpose machines), which are used in different kind of engineering industries as well as offshore construction. All the machines in offered in this category are checked for their durability, functionality and various other quality parameters to ensure their compliance with ISO and other industry norms before sending them at client's end. The range of equipment offered in this category include :
• Leak testers
• Hydro testers
• Hydraulic testers- Devashish associates
We are into the manufacture of different crimp testers used for testing crimped wire terminals. The different models of the products available with us include manually operated, motorized, and computerized as per our clients’ requirement. Its prominent features include measurement of force with a digital display and computerized system.
- Sushma Industries
We offer high quality hydraulic compression testing machines, which are designed for carrying out compressive strength tests on cement cubes, concrete and other such different materials. These machines are available in the capacity of 25KN to 3000KN and are supplied with pressure gauge and digital display. It can test the cubes specimens of sizes 10cm to 20cm and cylinder specimens of sizes 7.5 x 15cm to 15 x 30cm. The frames of this hydraulic compression testing machines are steel fabricated and are constructed in the following way:
more...- ACME Scientific International
We offer a wide range of digital direct shear, which helps to perform direct shear and residual shear through a total computer control, conforming to IS 2720 (Part-XIII) and BS 1377. This is a table mounted model and has stepper motors controlling shearing load. Further, the stress levels can be maintained with in the limits of 0.5% through set of weights. In addition, vertical and horizontal displacements and shearing load are all displayed in their respective engineering units on LCD display.
Apart from this, the maximum strain rate that can be achieved is 9.9999mm/min and the minimum strain rate can be programmed as low as 0.0001mm/min.- Hydraulic & Engineering Instrument
One of our most demanded trainers the product can be modified as per the requirements of our clients. Its salient features include: more...
- Anshuman Tech Private Limited
We offer a wide range of California bearing ratio apparatus, which are incorporated with load frame, hand operated available in capacity of 5000kg with high and low rates of travel of the lead screw.
Some of the specifications of our products are:
more...- Scientific International, New Delhi
As per IS: 2720 (Part XVI) The California Bearing Ratio Apparatus consists of : more...
- Dynamic Engineering Co.
The Test Rigs are designed for light run,run torque and lock torque of the starter with 6v/12v/24/48v. The test rigs are available in various models.
• Simple Test Rig to check car starter with light run & run torque, which provides voltage & current.
• Heavy Duty Starters Test Rigs for Heavy Vehicles to check the light run & run torque.
• Complete Starter Performance Test Rig with PC Inter-phasing, operation through PC with print out facility.
Features : Built-in AC/DC power source, loading through latest technology powder brake system,torque sensing by torque sensors.- Technokrats
SIMPLETEC Test Rigs for hydraulic cylinders, valves, pumps, motors, etc. are designed for testing pressure, leakage, flow, etc., with provision for cyclic and fatigue tests. Digital readouts are provided for pressure, temperature, flow, etc. PC based data acquisition system can also be provided. Both hydraulic oil and water can be used as test fluid.
- Simpletec Automatics Private Limited
As per IS: 2386 (part IV)
Used to determine the impact value of aggregate. The sturdy construction consists of a base and support columns to form a rigid framework around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 ± 5mm. The hammer is provided with a locking arrangement. The apparatus is supplied complete with cylindrical cup, metal measure 75mm dia x 50mm high and a tamping rod. more...- Dynamic Engineering Co.
Our company produces petrol engine test rig, which is utilized in various automobile and other engineering industries. This petrol engine test rig is provided with a 4 stroke single cylinder. More over the petrol engine is joined with an alternator of 2 KVA capacity.
These features make it very efficient and give high performance.- Contech Micro Systems
Fip test bench with electronic stroke/rpm counter and required basic accessories Option with the following:
• Hydraulic drive
• Belt drive
• Thyrister type electronic drive- Technokrats
We offer id bench type consolidometer under our range of consolidation, which are made of cast aluminum. These are incorporated with bearings at the fulcrum and a loading point. Further, our equipment is easy to operate and also comes in electronic version that have LVDT meant for displacement measurement. In addition, our products are possess digital display, which can be connected to computer through a RS232 port. Our range can calculate various parameters like compression index (cc), coefficient of compressibility (av), coefficient of volume compressibility (mv), coefficient of consolidation (cv).
- Hydraulic & Engineering Instrument
Our Los Angeles Abrasion Testing Machine is used for determining the resistance of small size coarse aggregates and crushed rock. It consists of a hollow cylinder, mounted on a sturdy frame on ball bearings and with a detachable shelf which extends throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover. The drum of this machine is rotated at a sped of 30-33 rpm by an electric motor through a heavy-duty reduction gear. It is supplied completely with a tray for collection of the materials with revolution counter and abrasive charge.
- ACME Scientific International
Presenting GraviTest Model 6300 manufactured by Gintronic that are manufactured in accordance with various international standards like ASTM E96, ISO 2528, EN ISO 12572, EN 1931, DIN 52615, BS 3177, DIN 53122 (Part 1), etc. Our complete automated system, microprocessor controlled product has the following features:
• Balance Capacity: 0-300 grams
• Balance Resolution: 0.0001 grams
• Sample thickness: 0.01 to 3 mm
• Standard tray for 6 samples – with 50 cm2 sample surface
It also has an integrated:
• Humidity control: 10% - 90% relative humidity
• Control of the air speed / velocity over the samples: from 0.15 to 3.3 m/s, adjustable in steps pre-selectable
• Sensor for measuring the atmospheric sensor
• Temperature control- Federal India Trading Company
Our wide range of Brazilian test apparatus are used for indirect measurement of tensile strength of rocks. These meets the requirements of IS:10082-1982 for use with ‘NX’ size core samples. Further, our equipment comprises of the following: more...
- Hydraulic & Engineering Instrument
Presenting an assortment of precision engineered testing equipment manufactured by Gurley, which is an international company engaged in this field. The variety of products that we market comprise of the following:
Air Permeability
• Model 4340
• Densometers
- Model 4110N
- Model 4118N
- Model 4140N
- Model 4190N
- Model 4320DN
• High Pressure Densometers
- Model 4150N
- Model 4240N
- Model 4250N
Permeometer Model 4301
Absorption
Stiffness
- Flatsheet Testers
- Tubing Bending Resistance- Federal India Trading Company
Our tensile testing machines are electrically operated and are used for determining the tensile strength and elongation of various materials like rubber, plastic, paper, wires, chords etc. These machines are manufactured in various capacities and test appropriate traverse speed and using suitable grips in conformity with ASTM, DIN, BIS, and BSS standards. It is fitted with over-travel safety switches suitable for 230 V AC supply. This machine is available in analogue as well as digital models and with the capacity of 100kg to 5 ton.
- ACME Scientific International
SIMPLETEC Hydraulic Pressure Testing Machines are offered with system pressure from 400 bar to 2500 bar. These machines are portable, noise free, suitable for hydraulic oil or water and can also be used for hose proof/bust testing.
- Simpletec Automatics Private Limited
Our range of motorised test sieve shaker carries 8 sieves of 20 cm diameter and 6 sieves of 30cm diameter. The sieve shaker is driven by 1/4 HP motor through reduction gearbox. It is suitable for operation on 240V, 50 HZ 1 pH and weigh 80kg. We also provide laboratory and rotate type shakers.
- ACME Scientific International
We are a respectable name in the industry engaged in sourcing and supplying of a range of testing equipment and instruments. We have been successfully marketing and supplying these equipment manufactured by Testometric. The products available under this brand include the following:
• AX Models
• CX Models
• Special Models
• Grips & Accessories- Federal India Trading Company
SIMPLETEC Hydraulic Pressure Testing Machines are designed for testing hydraulic cylinders, gun-barrels, shells, etc. Hydraulic oil or water can be used as the testing fluid. Following are some of the special features:
more...- Simpletec Automatics Private Limited
Our range of bitumen extractor are used for determining the quantity of bitumen in hot mixed paving mixtures and pavement samples. These are incorporated with bowl, which is coupled directly to a motor through flexible coupling. Further, we also provide a variac is that is preset to give 3500 r.p.m. to the bowl. Moreover, our range is suitable for operation on 220 V, single phase, 50 Hz supply.
- Hydraulic & Engineering Instrument
