 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Plant & Machinery > Hydraulic & Pneumatic Equipment >
Hydraulic Shears
Products - 31
|
Hydraulic Shears |
Displaying 1-26 of Total 26 Products Found |
Products
"SANTEC' presents to you a range of most technically advanced hydraulic shearing machines with all latest features as per international standards.
|
Santec Exim Pvt. Ltd.
ISO 9001:2000   |
|
We are engaged in manufacturing and export of best quality extra edge hydraulic shears, that are in tune with ISO guidelines and operational requirements of different industries. These hydraulic shears are available with easy and fast motorized blade gap setting arrangement. Further, hydraulic hold downs provide positive gripping of plates during the shearing.
Capacity:
20 MM x 32 MM
Width:
3000MM x 5000MM
Short Facts:
• The blade movement is powered by a relatively small, single hydraulic cylinder driving a pair of “bell cranks” arms. The mechanical advantage gained by this system provides all the force necessary for full shearing capacity.
• Rake Angle adjustment by push button gives twist free shearing.
• Easy and fast motorized blade gap setting arrangement by push button.
• Guides are located outside the frames to provide accurate guidance to cutting beam. This allows visual inspection of the guides for more...
We manufacture, supply and export of fixed rake angle hydraulic shears, that are reckoned in the market for excellent functional standards. These hydraulic shears are available with the facility of easy cutting length adjustment. They are provided with roller guides on ram with hardened replaceable liners.
Capacity:
2MM x 10MM
Width:
1500MM x 3000MM
Short Facts:
• Ram Roller Guided System incorporating traditional TRIMANS torque tube design.
• High cutting quality is ensured through the Rigid Ram roller guided system along with HCHCr blade and low fixed rake angle.
• Easier Cutting length adjustment.
• Instantaneous ram stoppage and hydraulic overload safety provides maximum safety for machine and operator.
• Least impact loads gives longer blade life and noiseless, which gives (insure of improves) extended optimum cutting quality.
• Easiest & fastest clearance setting arrangement with Direct calibration more...
We present best quality variable rake angle NC hydraulic shears, that are immensely used in different industries. Thee machines are provided with easy to use NC controlled heavy duty back guage (Range 760 MM) with PLC based controller. While fabricating these machines, we lay prime emphasis on their dimensional accuracy and fast speed.
Capacity:
4MM x 16MM
Width:
2000MM x 5000MM
The machines are supplied with easy to use NC Controlled heavy duty back guage (Range 760 MM) with PLC based controller on years of manufacturing experience. The emphasis is on speed, accuracy and repeatability.
The general characteristics of the controller are Programming of axis position (mm), position correction, step repetition – 16 steps, each step can be repeated 99 times, Alpha – numeric LCD 2*16 display, protection against miscounting.
Short Facts:
• Synchronization of cylinders by differential area principle eliminates complicated more...
Name of item :- Roller Guide Shear
Strip width
:- 600- 2000 mm
Strip thickness :- 0.2 mm to 6mm
URECO roller guide shear
machine with quick gap setting arrangement have been designed and
developed through structural analysis technique for continuous
production accuracy and repeatability.
1 . FRAME :- Rigid steel
frame of URECO Shear are optimally designed to avoid weak section at
load support and is interlocked designed. Table of frame is welded
together with support of plates. Table top surface will fitted with
Rollers .Rollers will rotate on anti friction bearings. At exit side
provision for stopper will be provided .
2 . Roller guide :- The
upper beam is guided by four point rollers guide . A replaceable
hardened liner is provided for minimum wear. It eliminates
lubrication of guide .
3 . Hydraulic power pack
:- Hydraulic power pack is mounted at top of machine more...
We are providing our clients with a quality range of hydraulic variable rake angle shears that is a reckoned machine in the automobile industry. Fabricated using latest technology and quality raw material, these machines are appreciated for their increased uptime, corrosion resistance and durability.
The highlighting features of these machines are as follows: more...
Engineered to precision, we offer an exclusive range of Pinch Roll cum Leveller that can be used for both rolling and straightening of the metal sheets. These machines are specially designed for the ease of operation and long service life.
We offer digital rock shear, which comprises of two controllers, hydraulic power pack with tandem pump to feed two actuators. These are available in the sizes of 300 mm x 300 mm x 450 mm, which can contain maximum rock specimens of 300 x 300 x 150 mm that are naturally or artificially jointed in any shape and form.
Further, the parameters like normal load and shearing load on strain basis or stress basis are controlled through the computer. In addition, on line graphical presentation is shown on the monitor. Moreover, after completion of the tests, our range helps to plot the following graphs on the window operated software. more...
We manufacture and supply a broad range
of hydraulic shear machines (especially 800 shear and flying shear). These are offered
under three ranges such as hydraulic, mechanical and pneumatic. Used
for cutting for squares, bars and similar products, we also have
capability to offer these on customized basis, as per the clients
requirements and specifications
Features:
more...
We are one of the leading manufacturers & exporters of billet shearing machines. Our machines are manufactured to cut various sizes of billets and the capacity of these machines varies from 50 mm to 125 mm for billets. The machine is provided with Six (6) numbers of gears to facilities operations with small power. Moreover, the body is made from M.S (plates) instead of cast iron to cover the risk of any breakage. more...
We are providing high quality range of hydraulic shears that has the capacity range of 2MT to 35 MT.
Suitable for CR & HR coil, these hydraulic shears are available in thickness up to 20.0 mm and width up to 2500 mm.
We manufacture and offer over crank shearing machines that are made by our experienced engineers through the structural analysis for the aspect of accuracy in production. High in performance and durable enough to withstand the high pressure, our over crank shearing machines have following parts: more...
Bridle Rolls are rolling strips that are used for coloring the strip of the rolled materials. These rolls are provided with several adjustable roll below and above the strip. Our exclusive range of bridle flow are known for their accuracy and consistent quality.
Rotary Shears are used for automatic cutting of splitted hot ends (front and rear). They are also used at cooling bed to cut fixed length of finished bars. Their size ranges from 300 mm PCD to 500 mm PCD. Their cutting capacity is upto 50 sq. mm hot bars at 800 Degree Celcius. Rotary Shears operate at speed of upto 12 metres / second. They can be fixed and swivelling type rotary shears with pneumatic cylinder fitted for body swivel and shifting pipes. The power requirement is 5 H.P. to 20 H.P. The cutting blades are made up of Alloy Steel duly Heat Treated and Grounded and require minimum maintenance and down time. more...
Designed to perfection, the under crank shearing machines that we have is known for their durable construction and longer working life. These machines require minimum maintenance and hence are widely used by a large number of clients. Our range of under crank shearing machines assure years of hindrance free performance.
The box type coil car are especially useful in situations where space limitations do not permit the use of turnstiles or double reels. The surface of the car that comes in contact with the coil are covered with high density material for complete protection of the wire. Our range of box type coil car provides fast and easy transportation of the coil in the manufacturing unit.
We offer a range of deflector cum pinch rolls that are capable of handling variety of materials. These machines are used for squeezing materials with great ease and perfection. Our range of deflector cum pinch rolls are available in different specifications.
We present best quality variable rake angle NC hydraulic shears, that are immensely used in different industries. These machines are provided with easy to use NC controlled heavy duty back guage (Range 760 MM) with PLC based controller. While fabricating these machines, we lay prime emphasis on their dimensional accuracy and fast speed.
Hydraulic Shears
Rotary shears available with us are used to cut hot rolling front ends and tail end. Having an automatic stop/start, the machine is also used to cut bars into desired length before cooling bed. The machine has a heavy duty steel fabricated housing. Fixed / movable rotary shear is available with us. Punch rolls available with us are used for pushing hot rolled to another train. It is installed between two rolling mill drives and in between two opposite installs shears. It has a housing of steel, its body is steel fabricated and the roll will be of EN-31 standard.
Common Salient features:
more...
Short Facts: Ram Roller Guided System incorporating traditional TRIMANS torque tube design. High cutting quality is ensured through the Rigid Ram roller guided system along with HCHCr blade and low fixed rake angle. Easier Cutting length adjustment. Instantaneous ram stoppage and hydraulic overload safety provides maximum safety for machine and operator. Least impact loads give blade life, noiseless operation which improves working atmosphere and eliminates need to isolate the machine. Easiest & fastest clearance setting arrangement with Direct calibration to thickness by levers on both sides of machine. Less power consumption, least wear & maintenance reduces operating costs and downtime. Roller guides on Ram with hardened replaceable liners give unlimited life. Back Gauge automatically moves away from bottom blade during shearing to avoid trapping of cut strips between them thereby reducingwear and tear of shearing blades and gauge bar.
We provide a wide range of shears, which facilitate distortion free shearing of thin sheets. Their box type structure are designed for giving maximum strength and better quality ensures cutting for a longer time. Further, good holding by hydraulic hold downs before shearing eliminates slippage of sheets. salient features: • variable rake angle • hydraulic hold downs • reliable hydraulics • fast & easy clearance setting • motorized back gauge • high quality blades • shadow line indicator • reputed make electricals • riller guides • robust structure cutting capacity: 4 mm x 2500 mm (m. S. ) to 12 mm x 3100 mm (m. S. ) more...
Hydraulic shear is designed for mill and pickling line having capacity of sheet cutting: Min 0.25 - Max. 10 mm
Strip Width : As per client’s requirment. more...
Short Facts: The blade movement is powered by a relatively small, single hydraulic cylinder driving a pair of bell cranks arms. The mechanical advantage gained by this system provides all the force necessary for full shearing capacity. Rake Angle adjustment by push button gives twist free shearing. Easy and fast motorized blade gap setting arrangement by push button. Guides are located on outside the frames to provide accurate guidance to cutting beam. This allows visual inspection of the guides for wear without dismantling the ram. Built in hydraulic overload protects the machine and the blades against damage due to misuse or overload. Hydraulic hold downs provide positive gripping of plates while shearing of narrow. Both top and bottom blades have four usable edges and rare interchangeable.
We provide a wide range of hydraulic shears, which facilitate distortion free shearing of thin sheets. Some of the features are as follows: • fixed rake angle • ease of operation • stroke length control • overload protection • centralized lubrication system • reliable hydraulics • motorized back gauge (optional) • high quality blades • reputed make electrical • robust structure capacity: upto 2. 5 mm x 2500 mm (m. S. ) more...
The machines are supplied with easy to use axis NC Controlled heavy duty back guage (Range 760 MM) with PLC based controller on years of manufacturing experience. The emphasis is on speed, accuracy and repeatability. The general characteristics of the controller are Programming of axis position (mm), position correction, step repetition 16 steps, each step can be repeated 99 times, Alphs numeric LCD 2*16 display, protection against miscounting. Short Facts: Synchronization of cylinders by differential area principle eliminates complicated hydraulic circuits and imported servo valves. The ram is guided by three point roller guides with replaceable hardened liners. Variable rake angle adjustment by selector switch Rapid blade gap adjustment by levers calibrated in thickness. Table provided with hardnend transfer bars and front sheet supports for easy feeding of plates Shadow light indicator, Front gauging by disappearing stoppers mounted on left squaring arm and motorized backgauge are
Category Matches
Related Trade Leads
|
We are offering hydraulic shears like industrial hydraulic shears,
hydraulic shears machinery, hydraulic shears machines and hydraulic
shearing mac... (Sell) |
Tender Notifications
B2B Newsletter Subscription
