 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Automobile > Brakes & Braking Systems >
Hydraulic Brakes
Products - 16
|
Hydraulic Brakes |
Displaying 1-16 of Total 16 Products Found |
Products
Hydraulic multi disc clutches present the following charactertics. more...
We offer high standard Electro Hydraulic Thrustor Brakes. These are suitable for 400-440 volts 3 phase AC supply for a wide range of drum sizes that varies from 100mm to 600mm diameter sizes or higher. Our Electro- Hydraulic Thrustor is of 'B' class insulation and continuously rated operating on 3 phase 415 V.A.C. 50 Hz. Some of the characteristics of our Thrustors include: more...
Our brake fluid filling machine offers solution for brake bleeding on assembly lines.
It is highly consistent and can operate with a single operator. It works on the principle of evacuation and metered oil filling operation. Its improved design especially for assembly line applications makes it maintenance friendly. The latest technology incorporated in it alert the user for any fault and hence it can be easily repaired. Our fluid filling systems can be used for filling more...
Our wide range of hydraulic failsafe disc brakes feature automatic pad wear adjustment, and support braking force ranging from 4775 N to 80,000 N of braking force. These are designed with fewer moving parts, and the pads can be replaced easily without downtime.
Our wide range is available in the following specifications:
more...
We have been manufacturing a dimensionally accurate range of industrial brakes and clutches as per the specifications of our clients. These industrial brakes and clutches are available in two models namely as Single Plate Combined Clutch and Brakes and are used in various industrial applications. We offer our range at industry leading prices and pack it safely in high grade packing material thus assuring that our products reach to our clients in the safest conditions. more...
Our electro hydraulic thrustor brakes are suitable for 400 or 440 Volts, 3 Phase A.C. We supply these brakes for a wide range of drum sizes from 100mm to 600 mm diameter. The brake of our electro hydraulic thrustor brakes is applied by the tension of the compressed springs mounted vertically between the thrustor and brake lever. The thrustor rods are connected with the brake by means of an angle lever.
As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel is retracted. The brake lever at the thrustor begins to move when the first lever reaches the stop on the brake base member
Our thrustor forms a part of the brake, which is a self contained unit and comprises of a centrifugal pump and impeller driven by an electric motor. The impeller spines in oil and develops a pressure head which is impressed upon the piston which is directly coupled to the load lifted. more...
Kateel Electro hydraulic thrustor disc brake is a fail safe brake. When power supply is given to the motor, hydraulic pressure builds up inside the thruster and the piston moves up to release the brake. When the power is cut off, hydraulic pressure gets released and the piston moves down, thus moving the brake arm forward allowing the pad to clamp the disc with the spring force and apply the brake.
Composition and working :
The Base is fabricated out of Mild Steel IS 2062 suitably drilled and machined for mounting on the machine. The brake arms and Bell crank levers are suitably oxycut to the shape. The edges are properly ground smooth and are drilled to suit the mounting base as well as the brake pads. The entire pin used in the brake for base mounting, thruster mounting, spring mounting are made out of C – 40 material and are machined properly to fit to the levers. The adjustment screws are also made out of C-40. Provision is made to mount the brake pads on more...
With our expertise in the industry, we are able to manufacture superior quality and flawless range of Pneumatic Failsafe Disc Brakes. Known for its Sturdy design, Easy mounting and other qualitative features, these find applications in various Steel Mills, Wind Turbines, Textile Machinery and others.
Specification
more...
We are engaged in offering precision engineered range of Hydraulic Active Disc Brakes. These are manufactured from quality raw material and find applications in various Steel Mills, Wind Turbines, Textile Machinery and others.
These are appreciated owing to the following features:
• Sturdy design
• Easy mounting
• Low maintenance
• Suitable for wet, dusty and corrosion aggressive environments
Options Available:
• Brake on / off indicator
• Organic / sintered metal brake pads
• Pneumatic control panel
• Scoop switch for brake on and off.
more...
The brake assembly contains of a brake arm, brake shoe, base frame, actuating lever, brake spring and an electro hydraulic thruster. The brake shoe is mounted on the brake arm and the gap between the brake drum and brake pad is adjusted by spring mechanism. A heavy spring suitable to give required braking force, is mounted in a square tube and a graduation scale is provided outside to note the spring force .The spring force can be adjusted suitably by tightening the nut at the bottom of the spring, All the components are mounted on the base frame.
This brake is normally in closed condition due to the spring force. The hydraulic thruster is actuated by an electric motor. When the power supply is on, the thruster motor is switched on and hydraulic pressure is developed in the hydraulic thruster. The piston is actuated instantaneously and the brake is released. When the power is cut off, the thruster motor stops thus releasing the hydraulic pressure. The thruster piston is pushed more...
Offering hydraulic failsafe wind turbine brake with ceramic sintered brake pads for wind turbines.* Applications: Slow Speed brakes, high speed brakes, Yaw brakes. more...
Hydraulic Brake
We offer thrustor brakes
Thrustor brakes are suitable for 400/400 volts. 3 phase a. C supply for a wide range of drum sizes from 100 mm to 600mm dia. The braking pressure to the shoes is transmitted from the springs by means of an extremely rigid and simple lever / tie rod mechanism. release of the brake shoe is effected by energizing the 3 phase thrustor which over comes the spring force and the shoes are moved clear off the drum by lever / arm linkage system so that the drum is free to rotate without any friction. the angle of the brake shoe being 90 degree makes the replacement and mainteance of the brake shoes easy at site. Also wearing of lining is much less than conventional brakes. makethrustor which forms part of the brake is a self contained unit and comprises of a centrifugalpump and impeller driven by an electric motor. The impeller spines in oil and develops a pressure head which is impressed upon the piston which is directly coupled to the load lifted. the oil used is transformer oil grade-bs 148 more...
We proffer topmost quality electro hydraulic thrustor brakes that are highly demanded for its features like low power consumption, minimum maintenance, straight line motion etc. Available in various dimensions and specifications, these hydraulic thrustor brakes are known for their excellent performance and accuracy. We are viewed as one of the major hydraulic brakes suppliers from India and ensure their availability at economical prices. - Self contained Unit. - Straight Line Motion. - Full Force capacity available from start to finish of full stroke. - Low power consumption. - Little maintenance work required. - Over load or underload on thrustor cannot cause damage to the motor. - Switching operation - 720 per hour (max.). more...
Offering electro-hydraulic thrustor operated disc brakes & drum brakes. more...
Category Matches
Related Trade Leads
|
|
We offer to sell hydraulic brakes, hydraulic thrustor brakes and electro
hydraulic thruster brakes. (Sell) |
Tender Notifications
