 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Boilers & Furnace >
Hot Air Generator
Products - 41
|
Hot Air Generator |
Displaying 1-40 of Total 40 Products Found |
Products
The oil fired hot air generator offered by us to our clients is a fully automatic hot air generator ranging from 10,000 Kcal/Hr to 1500,000 Kcal/Hr. it has a payback period will be 2 to 10 months against oil/gas fired or electrical hot air generators.
• Very High Thermal Efficiency up to 80%
• Less maintenance due to minimum usage of refractory in furnace
• Vertical Design
• Easy access for maintenance
• Less pollution by using Dust Collectors
|
Saz Boilers
  |
|
The gas fired hot air generator we manufacture is ranging from 50,000 kcal/hr to 15, 00,000 kcal/hr.The payback periods will be 2 to 10 months against Oil / Gas Fired or electrical Hot Air Generators.
• Very High Thermal Efficiency up to 80%
• Less maintenance due to minimum usage of refractory in furnace
• Vertical Design
• Easy access for maintenance
• Less pollution by using Dust Collectors
|
Saz Boilers
|
|
The hot air system is made up of a hot air generator which forces the hot filtered air into the hydraulic circuit. Hot filtered air generator is installed to force the hot filtered air into the washed chamber. The system supplies hot filtered air to the internal hydraulic circuits, directing the jet on the internal surfaces of the materials washed through the spigots of the trolleys of the direct injection system. The maximum temperature of the hot air is 100°C, the drying time can be adjusted from 10 to 60 minutes and the temperature from 60°C to 100°C in all the 30 programs. The drying system is particularly efficient and quick for the drying of narrow necked glassware, round bottom flasks, bottles, conical flasks and pipettes. Thanks to the direct injection on to the internal surfaces, humidity is easily and quickly eliminated.
We offer clients precision designed range of hot air generators. These feature relatively short heating up time and have superior process control facilities. Further, its superior designs also ensure minimum loss of heat in the given industrial application.
Advantages: more...
We offer RG series gas fired hot air generators, oil fired hot air generators that are available in vertical and horizontal designs. Their designs can be of direct as well as indirect heating types. The direct hot air generators are used in applications of high temperature drying and the indirect hot air generators are used in applications, where pure air is needed for drying. The special, compact design of industrial hot air generators ensures incessant, round the clock operation and high space saving. All our gas fired hot air generators, oil fired hot air generators can be availed in the capacity range of 20,000 Kcal/hr to 30,00,000 Kcals/hr. These industrial hot air generators are also available with the options for solid fuel firing such as coal, wood skagrowaste. Moreover, we can also supply imported & indigenous burners, having different firing options such as light oil, gas and heavy oil.
Our gas fired hot air more...
We provide both Portable & Industrial Hot Air Generators which are widely used in different applications such as Sugar, Chemical, Fertilizer, Paper, Packing (Print drying), Metal, Cement, fluidized bed furnaces, heat exchangers and many more. Some of the technical specifications are as follows:
• Capacities: 0.174-to 60 MW
• Working Temp: 150 to 8000C
Advantages:
• Relatively short heating up times
• Short mounting times due to less weight
• Minimum heat loss due to double shell design
• Does not require drying & warming up
• Low operating cost
• Heat combustion air up to 100-1200C
Hot Air Generator is a diesel/LPG or wood fired system which produces Hot air directly through indirect heating. The flue gases from fuel burning do not come in contact with fresh air which is being heated and consequently the hot air generated is free from any odour, carbon particles or soot. This hot air can be fed directly to existing tumblers, dryers, chambers or whenever hot air is desired. The hot air generated is free from moisture and can attain a temperature of upto 250°C. In most of the cases, the savings are in the range of 65-70% over Electrical or steam heated systems.
We are engaged in manufacturing hot air generators that are appreciated for offering furnace with an adequate radiant heating surface maintaining safe. These hot air generators have the operating temperatures up to 450°C for indirect type & 750°C for direct type. Our range of generators is appreciated by the clients for technically adequate heat transfer areas giving superior thermal efficiency. Further, following are the salient features and technical specifications of our range of hot air generators: more...
View of oil fired Hot Air Generator in horizontal position. The hot gases transfer heat through the pipes carrying clean air. The clean hot air is supplied to oven chamber for drying pharmaceutical product. Heat is recovered through heat exchanger in the Convection Zone before discharge to the atmosphere. more...
Maintaining the highest standard of quality while manufacturing our range of hot air generator, we have been able to satisfy our clients to the most. Supplied in bulk, these are designed as per the specifications of our clients and their selection depends upon: more...
Cleaning In Place systems involves the mounting of water nozzles at strategic positions in the dryer installation. These nozzle heads can be placed in position prior to cleaning operation & removed for drying operation. They can also be fitted permanently.
CIP systems are best suited whenever there is changeover of product. CIP systems reduce time for washing & cleaning of a drying system. They generate minimum effluent.
CIP is popular in industries especially those handling food products, frequent washing requirement or changeover of product.
We hold expertise in offering Hot Air Generators (HAG) to cement & other process industries. Some of the firing applications include low BTU gases like blast furnace gas, coke over gas/ producer gas. Further these hot air generators can also be designed for agro waste like Rice husk, Groundnut shells, Saw dust.
The available range includes:
Oil / Gas Fired Hot Air Generators more...
Some of the advantages of the Industrial Hot Air Generator are as follows -
• Relativly short heating up times and good control possibilities.
• Short mounting times due to their small total weight, even Ecostar combusters with high heat release rates can be completely pre-assembled in our factory.
• Minimum loss of heat; Double shell design allows to recover a great deal of the heat flow. Otherwise passing outside through the refractory brickwork and bringing it back into the combustion process as preheated combustion.
• No need of drying and warming up.
• Individual process - dependent control possible because there is practically no stored heat.
• Wide range of control.
• Low operating is low cost.
• There is a small door to get in the generator for maintenance.
• You have ability to heat combustion air up to 100- 120°C to gain combustion efficiency.
Using quality mild steel and stainless steel, we manufacture a comprehensive range of hot air generators and hot air blowers with Ducting that are used for Silicone and platinum coating for Paper industry and Adhesive Coating Tape Plant. These hot air generators and hot air blowers are robustly constructed and have been appreciated for their superior functionality. Available in various technical specifications, our range of Hot Air blowers with Ducting can also be customized to suit the varied requirements of the clients.
Features: more...
Our precision range of Hot air generating system using electrical/oil/LPG gas fired is used to produce the hot air. Our experts can make use of the indirect firing application and it can be used to conveyor type and batch type oven also.
We offer hot air generator and associated thermal equipment with a wide range of heat duty from 50 kw to 10,000 kw. The equipment can be offered either direct fired or indirect fired and also in aseptic grade for frame applications. This photograph shows 100 kw hot air generator with electrical heating system. more...
We can also offer Hot Air Generator Direct/IndirectType of different capacity suitable for oil and Gas. The capacity of Hot Air Generator start from 25, 000 K cal/Hr. to 10,00,000 Kcal/Hr. These type of Hot Air Generator Generally used in for Drying Process, Rice Mills Dryer, Wood Drying Process and other related drying process. We can also design electrically heated Hot Air Generator as per your requirement.
Available
with us, is a high performing assortment of hot air generators that
is fabricated from superior quality raw material and latest
technology. Adhering to the industry recommended guidelines and
standards of quality, these generators hold optimum quality.
These
hot air generators are used in the following industries:
more...
HAG is designed for easy and safe operation. By mere turn of switch the unit can be put into operation. Any malfunction is easily and immediately detected and an audio visual alarm system gives a clear cut idea of the fault to the operator for quick rectification. The system is offered as a package comprising of the main chamber along with burner, dilution blower, and the control panel. Thus the commissioning time at site is limited to the fuel, electrical and outlet connection.
Salient Features:
more...
We offer technologically advanced hot air generators, which are acknowledged among our clients for high efficiency. These generators are fabricated from high heat resistant tested plates and tubes. Further, they are fully automatic and constitute distinct passes on smoke side and multi passes on air side. These industrial hot air generators can be fired from any type of solid, liquid and gaseous fuels. They are in sync with recommended guidelines and standards of the industry.
Hot Air Generators: more...
Double Ace make three pass indirect fired Hot Air Generators are manufactured out of high heat resistant tested plates and tubes. Three distinct passes on smoke side and multi passes on air side results in higher efficiency.
Double Ace make Hot Air Generator produces hot air instantly at required temp. It eliminates requirement of two stage heat transfer as in case of hot air generated by using either steam boiler or thermic fluid heater, where firstly steam is generated and then with the help of radiators hot air is generated.
Double Ace make Hot Air Generators can be fired with solid fuels like coal, wood, briquettes, agro waste, liquid fuels like F.O., L.D.O., H.S.D., gaseous fuels like LPG / Natural Gas etc.
Double Ace make Hot Air Generators are widely used in wood seasoning plants, lamination industry, bopp tape manufacturing units, spray drying plants, chemical and pharmaceuticals industry and any industry more...
Installation- Expofine chemicals, Rajkot
Capacity- 200 000 Kcal per hour.
Operating Fuel- LDO
Type- Indirect
Temprature- 200 C
Manufacturing Range- 30,000 – 20,00,000 Kcal per hour.
Type- Direct and Indirect
Temperature – Direct type-700 C
Temperature- Indirect type-100 – 300 Maximum.
Operating Fuels- Direct-LDO/GAS/HSD
Operating Fuels- Indirect-Solid, Liquid or Gas.
In Direct type combustion chamber is refractory lined and fresh air from atmosphere is mixed with hot Gases to result desired Temperature of Final Flues required for process. Maximum 700 C can be attained.
While in Indirect Fired, combustion chamber and heating Tubes are of stainless steel 310 .Flues are passing from Tubes while cold Air is passed around heating tubes. Burners are automatic and sensed by temp of out going Air. They are available in Horizontal as well as in more...
We manufacture Hot Air Generator of various capacities i.e. from 100,000 to 600,000 kcal/hr and it provides Hot Air up to 300 deg C which is suitable for drying, baking, heating, etc. The burner used is a monobloc or modulating burner and its fully automatic with precise control of fuel and air for efficient operation.
Features
more...
Our range of Hot Air Generator is manufactured using hi-tech machines in our state-of -the -art manufacturing unit. These are widely used by clients based not only in India but also across the globe. We also meet technical specifications as per clients need. Some of its unique features are: • Compact rigid • Fully automatic • Noiseless • Easy to operate • Highly durable more...
Hot Air Generators
We provide Hot air/ water generators in different ranges. These generators are either waste heat recovery type or fired one as per the customer requirements and availabilities at his end. These generators are very useful in the internal process of the plant for various applications.
Leveraging our technical expertise, we design and develop state-of-the-art Direct Fired Hot Air Generator that can run on gas or liquid fuel. It comes with temperature controllers to control the required temperature. Features and Functions: The combustion chamber is enclosed in a concentric shell with suitable lining. The fresh air from dynamically and statically balanced blower is fed to the chamber tangentially. The air envelopes the combustion chamber and absorbs the radiant heat from its surface and then mixes with completed combustion gases in a conical chamber. Hot air, thus generated is let out from Hot Air generator at controlled temperature to the process. Efficiency in these hot air generators is nearly 100% since surface losses are taken care of with proper insulation. The units are self-contained, ready to install immediately after power supply is given. The combustion takes place in refractory lined furnace. The combustion chamber is suitably designed to more...
Hot Air Generator
Leveraging on our world class designing and manufacturing facilities, coupled with our intensive research procedures, we have developed an enviable range of innovative products. Hot air generator invented by us operates on directly or indirectly fired mechanism. It uses multiple fuel options and can easily produce enormous amount of hot air. These generators can efficiently supply hot air up to a temperature of 350 degree Celsius, without any heat transferring medium. This energy saving device is appropriate for sugar mills and other medium density fiber board manufactures.
We offer a large range of excellent quality hot air generator that is procured from the well reckoned vendors. Our direct fired hot air generator is manufactured from the premium quality raw materials under high precision. Our direct fired hot air generator is specially designed to consume less space and to assure maximum efficiency. Direct fired hot air generator provided by us is a cost effective generator that needs low maintenance and provides high performance even in harsh conditions. We are counted among the dominant electric hot air generator suppliers, based in India. We offer direct fired hot air generator at very affordable prices and at brisk pace.
Technodry Block :-
Fully automatic hot air generators in oil fired design for drying applications.
Salient Features :-
more...
We are counted among the prominent manufacturers and exporters of indirect hot air generator that is widely demanded by our clients based in different industries for their high efficiency, safe usage and competitive prices. Manufactured using the latest technology, the indirect hot air generator provided by us can be made available in varying capacities to suit the specific requirements of our clients. more...
Hot air generators up to 150C
We are a trusted name in manufacturing hot air generators which are solid fuel fired, with four pass design consuming less space and assuring maximum efficiency. In it the fuel needed for the combustion are- Bagasse, Coal, Wood, Agro waste, Husk and many more. Following are some advantages of our product which makes us a preferred producer: more...
We specialize in the production of direct hot air and indirect hot air type generators that are rugged in construction. We also offer electrically heated generators that are fully automatic in operation. These have low heat release rate and consume less fuel. more...
Hot air generator
We offer process heaters, which is available for wide industrial applications. Our range includes oil, gas, non -conventional fuel fired process heaters. Under this category we offer:
Knackwell Engineers manufacturers direct and indirect type Hot Air Generators. The hot air generators are used for obtaining hot process air for Dryers, Ovens, Spray Dryers and various other applications.
Direct fired HAG are designed for temperature upto 900 ° C, whereas Indirect fired HAG have temperature upto 400 ° C.
Knackwell Engineers uses their own manufactured burners for the ovens. The burners are equipped for variety of fuels like Liquefied Petroleum Gas (LPG), Natural Gas (NG), Furnace Oil (FO), High Speed Diesel (Diesel Oil), Light Diesel Oil (LDO) and Kerosene. more...
We offer various types of hot air dryers that can be used in different fields from spray booth painting to heating agro based products like cardamom, garlic, papad, chilies, potato chips, onions, and confectionery. These are also suited for drying bulk drugs, Carbon Granules. Tailor-made models are also available on the request. These can also be customized as per the client specification. The highlighting features of our make are: more...
Direct and Indirect Hot Air Generators of all capacities with choice of fuel type like wood, coal, lignite, gas. L D O, H S D, Furnace oil, etc. Combination units for multiple fuel applications also available. more...
These instant steam generateo are available from 100kg/hr to 800kg/hr capacities. Furnace oil fired systems are available from 300kg/hr capacities onward These steam generator incorporate the latest CFR technology. Here the returning gases radiate heat twice in the radiant zone with ample residence time to burn the fuel particles for complete soot-free combustion. This ensures maximum heat absorption with perfect, smokeless combustion. Filtered fuel oil pressurized by the high-pressure fuel pump passes through the fuel preheater (for heavy oil model) to the burner nozzle and develops a cone of fine oil mist. The hot swirling combustion air in the pressure jet burner mixes with fuel oil mist in an efficient air-fuel mixing device and produces a flame at super combustion efficiency giving smokeless combustion. The boiler and Accessories are mounted on common skid with attractive front instrum- -ent and control panel. The unit, pre assembled and pre-wired reduces on site more...
Category Matches
Related Trade Leads
|
We are offering comprehensive range of hot air generator with the
following features like:
- Rugged construction
- High productivity
- Easy to ... (Sell) |
|
|
We are the manufacturer and seller of hot air generators. direct gas or
oil fired suitable to get hot air from 200 to 700 c-range from 30000 to
10 ... (Sell) |
|
|
Offering hot air generators, high performing hot air generators, rubber
industry hot air generators, textile industry hot air generators, rice
fact... (Sell) |
Tender Notifications
B2B Newsletter Subscription
