Products Directory > Scientific Instruments & Supplies > Laboratory & Lab Equipment >
High Pressure Autoclaves
Products - 44
|
High Pressure Autoclaves |
Displaying 1-40 of Total 44 Products Found |
-
Products
- Description
- Supplier Information
NSW-227 VERTICAL AUTOCLAVE (Outer Made Of Mild Steel) These Autoclaves are made Stainless Steel Inside outside shall be made of mild steel duly painted with epoxy powder coating. Fitted with automatic cut-off device for element for general safety and also fitted with indfoss piezostat. to adjust pressure between 15 to 22 PSI more...
- Narang Scientific Works Private Limited
Laboratory Autoclave - Vertical more...
- HMG (India)
We offer following autoclave to our clients: more...
- Lab Sales Corporation
Laboratory Autoclaves are widely used in pharmaceutical, food, water, biotechnology industries, as also in Microbiology and R and D laboratory.
- Labtop India, Mumbai (A Div of Skylab Instruments And Engineering Private Limited)
These are available in 3 different modes :
1) Portable
2) Laboratory
3) Surgical
Optional Fully Automatic System for Autoclave :
Supplied with microprocessor based digital temperature controller cum timer, automatic purging of steam with solenoid valve and low water level cut off system for heater safety.- Classic Scientific
We also manufactures Autoclave Vertical Digital/Auto/Semi-Auto with the following specifications.
Technical Data more...- Acquavir International
We have an unmatched expertise in manufacturing a wide range of auto claves for various industrial purposes and processes. These are manufactured out of superior grade and corrosion resistant stainless steel. We offer these in various sizes and models to our clients. These are used widely in the chemical, pharmaceutical and some other industries as well.
- Servotex Engineers
Sant engineering made Vulcanizers are horizontal, circular vessels for curing of rubber articles. These are made in diameters ranging from 800mm to 2400mm and the length 1 meter to 12 meters depending upon the requirement of the users.PRESSURE RATING : Uttam Vulcanisers are normally designed and built for a working steam pressure of 5 Kg/cm and are tested hydraulically before despatch for a pressure of 7.5 Kg/cmDIRECT/INDIRECT HEATING : For direct steam curing single wall vulcanisers are standard supply, however for indirect curing coil-in-chamber type Vulcanisers can be supplied with cyclonic-fan motor for even temp. in vessel.TYPES OF DOOR : Either swing-bolt type doors with mono-rail type retracting mechanism, sealed against leakage by asbestos ropes or quick-lock type design as shown in picture.
more...Sant Engineering Company
Specification Double wall unit made of stainless steel chamber and lid made of heavy duty gun metal single piece, unit run on power 220V 50 Hz double safety valves to ensure the safety of the user and the pressure gauge on the top of the lid, whistle, safty valve also provided on the top of the lid, gasket placed well between the lid and the unit water Lever Indicator to show the level of the water inside the unit, release wave of the steam while the cycle complete, water changing tap, water input funnel and two metal handle to hold the unit while movement, accessories; Heavy duty Power lead, two spare element, two spare gasket more...
- Rajas Enterprises (India)
High pressure water steam electrically heated vertical sterilizer used for terilizing of surgical instruments, Dressing materials, Linen, Rubber, Plastic material, Injection liquids by means of steam under pressure of 15 to 20 PSI. (Adjustable) Triple chamber with inner chamber and steam jacket made of thick stainless steel jacket.All sterilizers are hydraulically tested upto 2.5 times of working pressure. Outer chamber made of stainless steel sheet plate single piece and closed by wing nuts arrangement. Jointless neoprene gasket does not allow any leakage. Fitted with double safety valve, Water level indicator, Water inlet and drain valves. Supplied complete with cord and plug but without dressing bins, To work on 220 volts, Single Ph, 50Hz, AC supply. more...- United Surgical Industries
NSW-233 Horizontal Autoclave Most ideal for Institute or Laboratory doing bulk sterilizing research work. This Autoclave has double walled inside and outside made of Stainless Steel 304 Qlty. All these sheets are argon arcs welded. These sterilizers are tested hydraulically as well as electrically for safe operation. The hinged door is made of thick Stainless Steel Plate. The radial locking system comprising of thick rectangular SS bars with safety, mechanism, ensure complete risk free and leak proof sterilizing cycle. Automatic self closing device to prevent opening of the door while sterilizer is in operation and under pressure. The stainless steel steam generator unit is fitted with easily replaceable heating element and is fixed at the base of SS Frame. Water level indicates the water level inside the boiler. It is fitted with more...
- Narang Scientific Works Private Limited
NSW-242 High Pressure Sterilizer (Rectangular Model)Robust and rigid construction designed for all type of bulk sterilization which are commonly required in medical agricultural and Pharmaceuticals. Suitable for sterilizing hospital dressing linen, Rubber, plastic goods, surgical instruments, glassware etc. This autoclave work on down word displacement of air principle, which is most suitable and economic method of obtaining sterilization. Triple wall inner chamber shall be complete made of Stainless Steel Qlty. 304 including jacket and boiler made of thick Stainless Steel located under the sterilizer. The Sterilizer is fitted with self locking safety door which can not be opened when the chamber is under pressure. Pressure control switch (piezostat) is fitted in the sterilizer to control the pressure between 15PSI to 22 PSI. Sterilizing cycle is controlled from one point with the help of Multipart valve. A plug screen prevents more...
- Narang Scientific Works Private Limited
Avail from us, our range of P type
autoclaves that are made from high quality stainless steel. These
medical equipment come in two types that are vertical pressure type
and turning type. Our range of non electric and electric type
autoclaves come 120° C-131° C sterilizing temperature and
sterilizing time 25-30 Minutes or as desired. The heating element is
2000 Watts, 220/240 Volts A/C. Our range of P type stainless steel
autoclaves come in different models that come in different capacities
that are as follows: • DIV-071-Capacity: 11 Ltrs. (235/250
MM) • DIV-072-Capacity: 22 Ltrs. (300/300
MM) • DIV-073-Capacity: 24 Ltrs. (300/350
MM) • DIV-074-Capacity: 34 Ltrs. (350/325
MM) • DIV-075-Capacity: 37 Ltrs. (300/500
MM)- Indian Surgical Industries, New Delhi
We design and manufacture a wide range of autoclaves that is a pressurized device for heating aqueous solutions. Durable in quality, these machines assure the clients of longer life. We offer these machines in specifications as per the clients' specifications.
- Biocraft Scientific Systems Pvt. Ltd.
We are manufacturing Auto Claves for Textile & Wood Processing Industries as per client requirements which are all custom based and rust free chamber construction preferably nickel coated chambers, Stainless steel loading carriage with two to three shelves, microprocessor temperature control and with indicators for pressure and temperature.
- I Tech International
We offer autoclave, which is a pressurized device specially designed to heat aqueous solutions above their boiling point to achieve sterilization. This can be availed from us in different models, sizes and other specifications as laid down by our clients. more...
- Labline Stock Centre
We are engaged in manufacturing and supply of quality laboratory cement autoclaves that are suitable for conducting accelerated soundness tests on cements or the autoclave expansion test. These tests require constant steam pressure with the correspondent constant pressure.Features:• The equipment comprises a stainless steel cylinder with a welded heat insulated voer, which is mounted on a sturdy supporting frame, confined in a heat insulated metal housing• The attached control unit holds in a sensitive pressure regulator, pressure gauze, power switches and pilot lights that are used to control the electric heating units.• We offer laboratory cement autoclave complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.Technical Specifications:• Inside chamber dimensions are - 10.5cm diameter x 40.5cm height. The device is suitable for operation on more...
- Universal Scientific & Testing Equipment Co.
This is a Double walled chamber with Inner made of SS & outer made of M.S. (powder coated)/S.S.Lid. is also made of SS Plate with suitable Locking Wing Nuts. Fitted with Standard Accessories. (optional – Pressure Control Switch, Auto Water Cut Off)
- Everflow Scientific Instruments
The boiler of this laboratory autoclave or autoclave vertical is made of heavy gauge 18G stainless steel and outer body is made of mild steel duly painted/powder coated. The lid is made of mild stainless steel and machines to fit the cast ring by means of durable rubber gasket. The lid is tightened through radial locking ribs by means of control screw provided at the top. It is available in 20 liters size 300 x 500, 30 liters size 450 x 600 and 50 liters size 550 x 700.
- Biotechnologies Inc.
Introduction :
“AVI” made Autoclaves are designed and fabricated for steam sterilization process to kill micro-organisms through the application of saturated steam under pressure to suit various I.S. standards application in the growing field of Medical, Agricultural Institution, Bio-Chemical Industrial, Research laboratories and various Industries. more...- Avi Scientific (India)
The Portable Single Drum Autoclave is A highly efficient apparatus which is designed to meet the requirements of small dispensaries, nursing homes, laboratories, medical missions, clinics, ships operating theatres, pharmaceutics, etc. It is very simple to operate and economical to use.
The container is seamless made of thick Aluminium sheet or stainless steel as per quality required. The lid is made of alluminium casting or stainless steel as per customer requirement.It is fitted with timer,low water cut off pressure switch or any other customer requirements.
The safety valve is adjusted to blow off the steam at 17 lbs., p.s.i. maintaining the constant pressure of 15 lbs. The entire autoclave is heavily Aluminium alloy/stainless steel. The container being seamless, there is no leakage and hence it ensures quite a longer service. The autoclave is made for use on electrically and gas.
These are offered in the following quantities: 9 lt, 20 lt, 24 lt, 33 lt, 39 more...- Surgical Udyog, New Delhi
We offer services for Hydrogeneration- Autoclave for edible oils of any capacity upto 20 Tons charge with one Heat Exchanger which can produce 5 batches per day of 24 hours. This is achieved with the unique design of agitation system in Autoclave. High degree of Automization to control flow, temperature and pressure in Autoclave ensures selective hydrogenation and excellent quality product. These are offered with the feature of zero steam consumption. This is achieved with the most efficient design of oil to oil heat exchanger.
- Ritika Projects International
We offer precision engineered autoclave to our clients as per their specific requirements.
Specifications:
more...- Syan Mechanical Industries
Our electrically heated laboratory autoclave are used for sterilization of rubber, utensils, linen, plastic, dressing material, surgical items, glasswares, lab wares etc. It works on the principal of saturated steam sterilization. Our auto clave is used in scientific research institutions, universities, hospitals, mushroom centers, tissue culture labs etc. The auto clave offered by us have the following features: more...
- Sandeep Instruments & Chemicals
The Laboratory Cement Autoclave is suitable for conducting accelerated soundness test on Cement or the Autoclave expansion test. The Equipment meets the requirement of IS: 4031(Part-3)
The Equipment consists of a Stainless Steel/Mild Steel Pressure Vessel with insulated outer shell fabricated. The Pressure inside the vessel is controlled through a Pressure gauge and spring-loaded safety valve for control of Heater unit.
Specification :
more...- Associates Scientific International
Backed by diligent workforce, we provide autoclaves in standard as well as customized configurations, as per clients’ specifications. The product finds wide application in microbiology, medicine, dentistry, metallurgy and many others. Specifications of the product include:
MOC SA240Gr316L
Size 2400 I/D x 6500LG x 25mm Thk
Weight 18 MT- Novatech Process Equipments Private Limited
We offer a wide range of autoclave, which are made of stainless steel and are easy to operate. These are designed with lid, pedal lifting device and stainless steel basket. Further, our range is fitted with pressure stat, low water cut-off device, safety valve, pressure gauge steam release cock and pressure adjustable up to 20 psi. Our equipment is available in the following chamber sizes: more...
- Biological Enterprises, Delhi
Consists of a stainless steel cylinder with an insulated cover. Mounted on a sturdy supporting frame, enclosed in a heat insulating metal housing. The attached control unit enclose a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating unit. Inside chamber size; 15 cms dia x 60 cm height.
- Associated Scientific and Engineering Works
We offer to our clients high quality bearing autoclaves which efficiently perform the task of heating aqueous solutions above their respective boiling points and achieve sterilization. Further our equipment also comes with various other physical, chemical & biological indicators, which ensure that autoclave reach the correct temperatures. Their precision manufacturing makes them useful in the field of microbiology, veterinary science, medicine, dentistry & metallurgy.
- Padmavati Fabrications
We are manufacturing autoclave, which is widely known for its robust structure and effective functioning. Our products are competitively priced to suit the requirements of the customers.
- Vani Fab Engineers Private Limited
Construction : Superior quality & finish. All the following autoclaves are made of 8 Gauge aluminium. The drum is deep drawn & the ring on top is riveted. The lid is made by casting. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner aluminium container, inner tripod stand. more...
- Apothecaries Sundries Mfg. Co.
With the help of our expert workforce, we are designing and developing a wide range of autoclave. These are manufactured using superior grade raw material to ensure efficient performance at client's end.
- B. D. Instrumentation (India)
These products are used for drying and removing moisture from transformers.They are provided to Vacuum manufacturers and Projects pvt. ltd.
- Fabcon Industries
Our company do refurbish work for autoclave, which in turn provide high performance. We use latest and directive technologies and incorporate them to make the autoclave working smooth & fine. These autoclaves are refurbished to provide high performance autoclaves for industries engaged in manufacturing processes.
Specifications: more...- Varad Management Services Private Limited
An Autoclave is a pressurized machined used for heating the aqueous solutions like injection fluids, chemicals, etc., above boiling point so as to attain sterilization. We manufacture quality auto clave's from high grade stainless steel that are applied in many different industries like pharmaceutical, chemical, food processing, dairy, oil etc. They are manufactured in horizontal and vertical variants.
Technical Specifications:
• Capacity: 1000 to 10,000 liters
• Heating Mode: Electrically heated through flange/ immersion type heaters
• Operating Temperature: 121 Degree Celsius
• Operating Pressure: 1.2 kgf/ cm sq.g (15 psi-17 psi) more...- D Mark Engineers
Our range of autoclave includes:
• Autoclaves-High Pressure
• Autoclaves-Pressure Cooker Type
• Autoclaves-Wing Nut Type
• Autoclaves-Accessories
•- Global Products Corporation
Construction : Economy series autoclaves are made of 10 gauge aluminium. The drum is deep drawn & the ring on top is riveted. The lid is made by casting. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner aluminium container, inner tripod stand. more...
- Apothecaries Sundries Mfg. Co.
We have for our clients autoclave hi
pressure that come in both electric and non electric types. The outer
body of these autoclaves is thick mild steel finished with powder
coating paint or are made of stainless steel. The lid of the chamber
of also made of thick stainless steel plate. Pressure leak proof, the
lid is tightened by radial arms through a steering wheel, provided
with pressure gauge, pressure release valve, safety valve, water
level indicator. We offer these autoclaves with a pedal
lifting device. Capable of holding pressure between 5 to 20 PSI,
these medical instruments are provided with stainless steel basket,
pressure switch & automatic water level indicator. The different
sizes in which we offer these hi-pressure autoclaves are:
(L x B x H) • 250 x 450 mm. • 300 x 500 mm. • 350 x 550 mm. • 450 x 600 mm. • 550 x 700 mm. more...- Indian Surgical Industries, New Delhi
The aluminum made autoclaves that we offer
are winged nuts type. These autoclaves come with Sterilizing Temperature
between 120° C-131° C and the time require is 25-30 Minutes or as per desired.
The heating element is 2000 Watts, 220/240 Volts A/C.
Size: more...- Indian Surgical Industries, New Delhi
AUTO-03
- Apothecaries Sundries Mfg. Co.
Category Matches
» Autoclave Sterilizer
» Autoclaves
» Automobile Parts & Components
» Bacteriological Incubator
» Bod Incubator
» Electric Sterilizer
» Horizontal Autoclave
» Humidity Chambers
» Lab Incubator
» Laboratory Autoclaves
» Laboratory Equipment
» Laboratory Freezers
» Laboratory Ovens
» Laboratory Scientific Instruments
» Laboratory Sterilizers
» Laminar Air Flow
» Medical & Hospital Supplies
» Medical & Surgical Equipment
» Portable Autoclaves
» Stainless Steel Autoclaves
» Steam Autoclaves
» Sterilizers
Related Trade Leads
We are looking for laboratory equipment and lab testing equipment.
(Buy)
Offering laboratory items like microscopes, dissecting sets, tripod stands, microtomes, containers, culture bottles, petri dish, bunsen burner, sli...
(Sell)We are offering diverse range of laboratory equipment like: - Laminar Air Flow Horizontal - Constant Temperature Water Bath - Environmental Tes...
(Sell)We are offering diversified range of scientific laboratory equipment like: - Electrophoresis Apparatus - Laminar Flow - Micro-tomes - Autoclav...
(Sell)We are offering comprehensive range of laboratory equipments like: - Electrical Drying Oven - Laboratory Autoclaves - Viscosity Bath - Tray Dr...
(Sell)
Tender Notifications
Access over 50,000 current government, corporate & global tenders and procurement notices from India.
SUBSCRIPTION SERVICES:
Tenders on Web with Email
Access all tenders online and receive latest tenders in your mailbox.
B2B Newsletter Subscription
About Us | Press Room | Awards | Commendations | Success Stories | Contact Us | Terms of Use | Privacy Policy | Feedback | HelpCopyright © 1996-2008 IndiaMART InterMESH Limited
