Heating Equipment

SSSS-WCE-1616

Equipped with latest technology, these welding equipment are highly efficient and safe to use. more...

We are manufacturing wast range of different types of Ovens for industrial and laboratory purposes at competitive prices. It consist of tray or trollies or both as per the requirements. We are also manufacturing customized sized Ovens as per user requirements. more...

Laboratory oven memmert model. Triple body construction ,inner chamber made of stainless steel 304 grade , mirror polish ,outside ms powder coated with microprocessor based digital temp. Controller with ssr powerpack with two nos of shelves. Ss door hinges and door lock will be provided. Ventillation will be on top of the oven. Motorised air circulation will be provided for uniformity of the heater. Timer will be provided which will cut the heater and horns the buzzer after the set time. Safety temp. Controller to cut the heater in case overshoot with three tray.

The heat equipment manufactured by us are known for giving reliable and accurate measurements. Precisely engineered as per international quality standards, we have provided the equipment with a micrometer screw to measure rods. Binding posts are provided to join buzzer, bell or galvanometer; and indicate exact point of contact of the screw. Further, the tubes are provided with outlet or inlet tubes for steam which releases extra pressure. Our heat equipment can be availed with three rods of Aluminum, Brass and Iron, without bell and battery.   Functional specifications of Heat equipment offered by us are mentioned below:
* Dimension of the brass tube: 50cms x 2.5cm CP
* Reading of the thermometer: from 1°C to 110°C
more...

* PD 25 is the largest of Elwarm’s products. It can deliver up to a maximum of 25 kW at any frequency ranging from 15 kHz to 50 kHz.

* These heaters find applications in melting small quantities of iron & steel, copper, brass and aluminum and for mass heating in forging shops, brazing of heavy bus bars in electrical industries.

* PD 25 are supplied as mobile units with tilting furnaces for melting / with tunnel coils for Billet Heating / with channel type coil for bar- end heating. It is also built with integrated cooling water systems.
more...

We offer wide range of protection tube from mild and stainless steel to refractory oxide (ceramic) and also variety of exotic material including rare metals suitable for various applications.

The choice of sheath material depends upon the temperature and the process atmosphere.

Ceramic (non-metallic) tubes are fragile but have high chemical resistance; they can with high temperature(upto 1800°c in some cases). Metallic tubes most common stainless steel has mechanical advantage and higher thermal conductivity & can be used at temperature upto 1150°c. Ceramic tubes are superior when high purity is required to avoid sensor or product being contaminated at elevated temperature like in glass industry. more...

Heat transfer coil in PP / PVDF/ HDPE for highly corrosive liquid tanks , Auto phoratic paint tanks.Designed and developed as per client’s specifications, our range of heating coils is manufactured using superior quality PP. The specifications of our heating coils are :


* Size: 20-32 mm OD
* 10deg. To 80 Deg. C- technical
* Applicable in industrial painting pretreatment system and highly corrosive liquid heating / cooling
more...

The drip leg heater is a versatile system for boosting the flow of chlorine gas whenever the requirement of chlorine gas is more. With a wall mounting arrangement and a controlled temperature of 80-85 degree, the drip leg heater is an essential accessory in the industry

* Control panel 230 v electric supply to 24 volt
* Wall mounting arrangement
* Temperature controller to 80-85 degree.
more...

We manufacture innovative heating solution to improve operational efficiency of the various types of industries across the globe. Our range of heating elements include coil air heaters, mica surface heaters, duct heating, compressed air and forced air-heating elements. These heating elements provides you cost effective solution that fits your specific requirements best. more...

Available with us is a wide range of heating mantles, which are fabricated using premium quality raw material. Our mantles are available at the most affordable prices and can be customized in terms of sizes & designs as per the specific demands of the valuable patrons. These mantles are highly acknowledged by the patrons due to their premium quality and use of the latest techniques & equipment. Some of their attributes are given below:  
* Maximum accuracy
* High strength
* Superior quality.
  more...

From our extensive product range, we offer our clients a wide collection of Vortex Mixer at the most decent prices. This cost effective product is highly demanded among clients due to its sturdy construction and energy efficiency. Apart from this, this product is also east to handle and maintenance free.   Features:
* Type – vibration
* Speed – variable
* Neoprene Cup impart powerful tension to tubes
* Touch ON/OFF switch
more...

Hot plate - counter top

Glass Agencies are Manufacturer of Heating Mantle.

Matrusree’s Porcelain Heaters, offer a large heated area to the Gases, liquids or semi-solids to be heated when inserted into a thermo well. A Feature of this type of heater is that it may be removed for repair or replacement without draining the contents of the vessel. The sheathing Material may be M.S, S.S or Titanium or with clamp late, depending on the application.

Construction:

Open helical coils of high resistance wire is evenly stretched and laid through fluted refractory bobbins.these elements are then inserted into metal pipes of different diameters depending on the diameter of the fluted refractory bobbin, forming an integral part of the system. They are also welded to screw plugs of 1 ½” 2” or 2 ½” BSPT. Vertical heaters are provided with non-heating Zone, as they are required from top. Watertight terminal is available for this type of heater.

Material such as oil, wax, fats and bitumen require low heater more...

Induction heating for shring fitting of bearing in shaft and motor casing more...

On offer from us is a reliable range of Pre-Heating Systems. Manufactured using quality assured components and other material, these systems are widely used for removing water particles and for curing the moisture level of the lining. The products we are offering are easy to install and are available in varied sizes and technical specifications to suit the patrons' needs.   Attributes:  
* Highly durable
* Optimum performance
* Automated processes
more...

It has always been our avowed goal to provide the client the best product that will position him the number one in the market. We continuously up date our product range to deliver the best in the category. Our IR Booster Oven Anim 2 a step ahead of the previous product in the same range for its higher output capabilities. We offer an IR oven for dry-off, preheating, flashing, gelling (powder), and complete curing of your coating application often can save time, rework and energy. Inherently, this will lead to greater efficiencies and increased profits.   An IR booster oven in combination with the traditional convection oven can create significant savings, and surprisingly excellent results. Benefits normally realized with total IR systems also can be realized with a booster add-on. There are several advantages to using an IR booster more...

Product Name : HB 10 digital
The digital display featured on IKA®’s heating bath HB10 offers each user a high ease of operation. The temperature control can be adjusted with a micro controller. With the help of an infrared interface, the heating bath HB 10 digital can communicate with the rotary evaporator RV 10 digital and control. Additionally, it offers three selectable operating modes. These allow for:
A: clear regulation of all parameters
B: a fixable safety temperature setting avoids unintentional readjustments
C: fixable set- and safety temperatures

Therefore, it is the first choice when it comes to „heating and tempering” in the lab and offers a heating power of 1350 watts. IKA®’s heating bath HB 10 digital is suitable as a water- or oil heating bath for the tempering of liquids. It is particularly suited for use with IKA®‘s rotary evaporator RV 10. Here, the optimized bath shape is adapted more...

The heat equipment manufactured by us are known for giving reliable and accurate measurements. Precisely engineered as per international quality standards, we have provided the equipment with a micrometer screw to measure rods. Binding posts are provided to join buzzer, bell or galvanometer; and indicate exact point of contact of the screw. Further, the tubes are provided with outlet or inlet tubes for steam which releases extra pressure. Our heat equipment can be availed with three rods of Aluminum, Brass and Iron, without bell and battery.   Functional specifications of Heat equipment offered by us are mentioned below:
* Dimension of the brass tube: 50cms x 2.5cm CP
* Reading of the thermometer: from 1°C to 110°C
  more...

We manufacture and supply a wide range of vertical four pass thermic fluid heaters that are suited for various industries to meet the rapidly changing and undependable energy situations. Our generous design of vertical heaters and integral furnace gives an assurance of the rated output on any solid fuels like Coal, Wood, Lignite, Husk, Biogases, Pet Coke, Saw dust etc without compromising on performance. We can also design and deliver sustainable solutions to meet the specific process requirements that help improve process consistency and reduce downtime leading to further increase in profitability.   Salient Features  
* High Combustion Efficiency - The combustion chamber is designed meticulously by giving proper grate area and dimensions to give high combustion efficiency even on LCV fuels.
* Fuel Of User’s Choice:
* The system is designed to use fuel of user's choice. more...

We are offering Swimming pool heating (Heat Pump)

This is dual fuel furnace used for annealing or for doing any other processing. The burner used is of fully automatic fuel efficient. The furnace is fully lined with ceramic fixer for fuel efficiency and less heat leakage.

We are offering crucible lifters, which allows quick and easy movement of crucibles without removing the furnace top cover. These are renowned for easy handling and prevent damage to heater panels and eliminate costly repairs, as furnace top can be left in place.

* The heating torch big is designed to heat mild steel with 1 type of nozzle provided with set.
* The body is forged brass jet with heavy duty brass pipe.
* Heating torch comes with nozzle with OD 38mm & multiple nozzles.
* Nozzles are made out of MS with zinc plated.
* The model is 475mm in length.
* Models with different lengths and with specified nozzle can be made available under specific order.
* This torch is used with LPG by using suitable nozzles.
more...

Our range of reheating furnished equipment comprises pusher and ejector. These are used for reheating furnace in steel rolling mills. To make our range at par with the international standards, we follow international standards of the industry. We are also capable to offer our range in accordance with the specific requirements of our customers.                   
 
  more...

We offer high quality of Dry Heat Chambers

Coating Pan
* Suitable Exhaust Blower Available Heaters & Blower Motor Is Electrically Interlocked & enclosed in enclosure
* MOC SS 304 / 316 / 316
* Angle Inclination Of 45 Degree And Can Be Adjusted As per Requirement
* cGMP Construction With High Pharmaceutical Finish With Documentation.
* Our products are available in different size range from 12, 24, 36, 42, 48, 60 to 72 inches
 The technical features of our products are: MODELS 12" dia 34" dia 36" dia 48" dia 60" dia 72" dia PAN DRIVE MOTOR HP 0.5 1.5 1.5 3 5 7.5

HEATER BLOWER CAPACITY CFM 100 250 400 600 1000 2000 DRIVE MOTOR HP more...

Industrial Heat Pump
designed for constantly maintaining the temp more...