![]() |
|
||||||||||||
|
|
Products Directory > Plant & Machinery > Oxygen & Nitrogen Gas Plants >
Gas Plants
![]()
Products - 194
|
Gas Plants |
Displaying 1-50 of Total 194 Products Found |
Products

We manufacture and export Acetylene Gas Producing Plants for the use of various industrial and other purposes. These plants and equipment are manufactured by using the latest technology of ING. L. & A., Bosch i, Italy and made as per international standards. This technology has been proven worldwide for the working efficiency and trouble free operations, safety and low power consumption. These Acetylene Gas Producing Plants are available in different capacities as per the client requirements. more...
![]()

Air Compressor
This is a multi stage, heavy duty water-cooled air compressor for 24 hours operation, horizontal type complete with fly wheel inter cooler, foundation bolts, motor pulley, motor, v belt, guard and slide rails. This is used to compress atmospheric air.
Air Purifier / Process Skid
This consists of the following Parts:
1) After cooler with tank
2) Nitrogen cooler with tank
3) Moisture separators
4) Chilling units with Freon unit
5) Oil absorber filled with alumina
6) Molecular sieve batteries on skid
7) Defrost heaters
8) Gas/Air/water line as per standard layout on skid /platform prefabricated and ready for installation
9) Water pump
10) Inlet & outlet water lines
11) Drain manifold complete with ball valves for draining moisture. All the above equipments are properly mounted on skid /platform complete with interconnecting piping and ready for installation
Expansion Engine
Complete with branded motor/starter of Siemens / more...
![]()

Our PSA oxygen generator uses zeolites molecular sieve as sorbet, produces oxygen by making use of the PSA principle. Under certain pressure, zeolites molecular sieve has different oxygen/nitrogen adsorption capacity that is much more nitrogen adsorption capacity than oxygen adsorption capacity. PLC controls pneumatic valve on/off to realize two towers alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces oxygen with desired purity
Some specifications are:
more...
![]()

Copper DX model contains an extra nitrogen purification module based on copper deoxo catalyst. This model finds application in synthetic fiber, optical cables & electronic industries. Running cost of this unit is slightly higher because it produces very pure nitrogen gas i.e free from oxygen and hydrogen as well. It is applicable where hydrogen contents are detrimental to the process.
GAS COMPOSITION :
more...
|
Sam Gas Projects Pvt. Ltd
|
|
![]()

(I) Air compressor: Screw/ low pressure- type:
We employ the most advanced compressor series available in the market. They have a unique combination, meeting customer requirements for low installation, operating and maintenance costs with high dependability and ease of use.
Screw type rotary compressors are one of the most advanced and trouble free.
Centrifugal Type Compressor: No other turbo type oil free compressor can match its efficiency and economy. This ensures a consistent and highly reliable source of air supply. Maintenance is extremely low.Oil free piston compressor are also very succesful due to V-Type configuration on very low working pressor.
(II) Pre Cooling system:
The pre-cooling system is a highly efficient skid mounted equipment provided with the main purpose of cooling down the air to a temperature of 5 to 8 degrees Celsius and thus to discharge the condensed water. We are using highly reliable compressors of European more...
|
Universal Industrial Plants Manufacturing Co.(P) Ltd.
|
|
![]()

The cryogenic liquid Nitrogen plants are available in sizes from 50 m³/hr (70 liter/hour) to 500 cum/hr (700 liters/hour) capacity. It is safe and efficient to operate and the oxygen confirms to North American and European Pharma copia and standards.
more...
|
BDM Cryofusion & Mandressi Italia
|
|
![]()

Such Kind of Plant is provided, If the requirement at the discharge is at higher pressure.Normally Our PSA system can provide pressure at discharge to about 6 Kg/cm2 g.But it can be increase up to higher degree of 10 Kg/cm2 g based on Client's requirement.
For this we need additional Booster,Suction Pot and finned cooler after the surge vessel so as to inhanced the pressure upto higher degree before storege Tank.Rest Of the principle is same as MS Model.
|
Sam Gas Projects Pvt. Ltd
|
|
![]()

SALIENT FEATURES more...
|
BDM Cryofusion & Mandressi Italia
|
|
![]()

Universal Boschi (Italy) has a wide range of Liquid Oxygen Nitrogen Plants starting from 50 cum/hr and following are the specifications for the same:
more...
|
Universal Industrial Plants Manufacturing Co.(P) Ltd.
|
|
![]()

S.S. Foundry designs and supplies complete hydrogen gas plants with cylinder filling facilities. On small scale, hydrogen is primarily produced from electrolysis of water in either Knowels type mono polar cells or filter press type bi-polar cells known as electrolysers.
![]()

We are manufacturing argon recovery plants which are produced by technique employing full rectification without using the Hydrogen and De-Oxo unit. It thus saves further on power costs, operational costs and investment. These argon recovery plants are highly appreciated for high tensile strength and low maintenance cost. Our plants have the following equipment:
Air compressor: Screw/ low pressure- type
These have unique combination which ensures lower cost on installation, operation and maintenance. Types are: more...
![]()

Oxygen are removed through separate paths in Heat Exchangers, for cooling the incoming air. Oxygen is compressed to a prescribed settled pressure by a liquid pump and is directly filled into cylinders. Nitrogen is however available at a pressure of approximately O.5kg/cm2 and the same can be compressed into cylinders with help of an independent high- pressure compressor.
Normally the Nitrogen available is of 98.5% purity only and is let out into the atmosphere as waste product. However, when Nitrogen is to be filled, into the cylinders for commercial use, the plant is controlled by a change in the valve setting to make the mixed Air chamber operative to achieve the required Nitrogen purity. (Facility of filling Nitrogen gas (PPM Grade) and withdrawal of liquid Nitrogen is also possible.)
![]()

Universal Boschi(Italy) has been the leading manufacturer and exporter of Liquid Oxygen Nitrogen Plants for more than 23 years and the specifications for them are as follows:
more...
![]()

With our years of experience and expertise, we are able to design Liquid Oxygen Plants. Available in small, medium and large capacity these are widely used in Water Process, Ferrous Metallurgy, Non-ferrous Metal Refinery, Coalmines and Pharmacy and can be availed by our clients at industry leading prices.
Following are some of its salient features:
• Fast and Easy to Operate
• Compact Design
• Latest Technology
• Practically Zero Maintenance
• Low Power Consumption
• Liquid Air Separation Technology
• Skid Mounted
• High Purity of Nitrogen >99,5% (99.999% Optional) Suitable for
• Soft Drinks,Juice,Beverages and Industrial uses
• Liquid Nitrogen Pump (Optional) can be added for direct compression of Nitrogen into Cylinders
• Single Electric Panel
• Cylinder Filling Station (Optional)
Our range of liquid oxygen plants finds application more...
![]()

Owing to our vast experience in this field, we are offering CO2 manufacturing plants on turnkey basis to our esteemed clients. These plants are based on both high pressure and low temperature process, with capacities ranging from 10 TPD to 200 TPD and product purity of 99.99% by volume. For this, we undertake all the work, which includes each and every aspect right from know-how and designing to commissioning & installations of these plants. Further, we provide these solutions at highly competitive prices to our clients.
![]()

Owing to the dedication of our adept professionals we successfully install Fuel Gas Recovery Plant in different manufacturing industries. The machines and equipment used for the purpose are stringently checked by our team of quality controllers who take initiative in ensuring that the best and flawless gamut is provided to our valuable clients. more...
![]()

We provide a wide range of raw materials and spare parts for industrial gas plants, medical gases plant and gas cylinders, especially for calcium carbide and aluminum nitrate. With the support of our advanced warehousing system, we can supply industrial gas plant spares and raw materials on turnkey basis for existing as well as new projects. more...
![]()

Nitrogen (N2) constitutes 78.03% of the air. Nitrogen is used in the chemical and petroleum industries for storage tank blanketing and vessel inserting applications. It is also used extensively by the electronics and metals industries.
Liquid nitrogen, produced by the cryogenic air separation process, finds wide use as a refrigerant in applications such as cryogenic grinding of plastics and food freezing. We supply variety of nitrogen gas plants, Liquid nitrogen plants. more...
![]()

We offer high quality range of Hydrogen Gas Plant that is well known for their performance, low maintenance cost, safety features and high productivity. Available in various technical specifications, our range is in high demand by our clients spread across the globe and is offered at industry leading prices.
![]()

We are manufacturing PSA Oxygen Gas Plants with the following specifications.
Small/ Medium Capacity :
more...
![]()

We are a trusted name engaged in manufacturing high performance oriented oxygen nitrogen plants as per the modern technology and designs of the Company ING. L & A BOSCHI, Italy. The respective technology are proven worldwide for their efficiency, trouble free operations, safety and low power consumption. The Boschi Column are known for its durable service and trouble free work for more than three decades in various parts of the globe.
Some of the salient features of our products are: more...
![]()

Our Nitrogen And Carbon Dioxide Plant finds wide application in different industries and is engineered to perfection. We endeavor to satisfy our clients all across the nation by fabricating our range as per the designs and specifications of our esteemed clients. These are durable, corrosion resistant, high in performance and require easy maintenance and installation. more...
![]()

We are engaged in manufacturing and supplying of cryogenic plants which are widely used for industrial and medical applications. These cryogenic plants can be offered to our clients in customized sizes and specifications as per their varied requirements. Moreover, we also offer on-site installation support for our clients benefit. more...
![]()

We are manufacturing PSA Acetylene Gas Plants with the following specifications.
Technical Specifications:
more...
![]()

Our range of liquid nitrogen plant is available in size from 50 m³/hr (70 liter/hour) to 500 cum/hr (700 liters/hour) capacity. The output of Liquid Oxygen can be stored in a liquid oxygen tank. Liquid Nitrogen can be available as a by-product simultaneously up to 99.99% (PPM GRADE) purity.
Application Areas:
• Water Process
• Ferrous Metallurgy
• Non-ferrous Metal Refinery
• Coal mines
• Pharmacy more...
![]()

We offer high quality range of PSA Nitrogen Gas Generation Plants that helps in producing nitrogen from atmospheric air and therefore the cost of nitrogen generation is very low. These are well accepted across the globe owing to the following features: more...
![]()

S S Foundry PSA nitrogen plants are ideal for gas generation, gas drying and gas purification systems. They can be skid mounted and may be operated through PLC.
Nitrogen can be generated from atmospheric air, on-site by installing a captive PSA (Pressure Swing Adsorption) generator. We can develop different capacity models in our PSA nitrogen plant, to make them suitable for producing commercial nitrogen and ultra pure nitrogen. This gas is used in various industries for creating inert atmosphere.
The PSA nitrogen plants is based on pressure swing absorption method. The nitrogen gas produced with this plant is high in purity and is economical. With this plant, 99.99% purity level can be achieved in nitrogen. Fuel requirement of our plant is minimum, thereby it is highly economical. Two purity levels can be achieved for the nitrogen are 99.8% and 99.99%. The start up time for our plant is very less. The nitrogen produced in our plants can be used in varying industrial
![]()

1. Air Compressor-Low Pressure
Air is compressed at a very pressure of 5-7 bar (kg/cm2). Air can be compressed at such low pressure by trouble free rotary compressor (Screw / Centrifugal Type advanced technology is employed in lieu of old bulky piston compressor)
2. Pre Cooling System
The second stage of the process uses a low pressure refrigerant for pre-cooling the processed air to temperature around 12 deg C before it enters the purifier.
3. Purification of Air by Purifier
The air enters a purifier consisting of twin Molecular Sieve driers, working alternatively. The Molecular Sieves remove the Carbon dioxide & moisture from the processed air before the air enters Air Separation Unit.
4. Cryogenic Cooling of Air by Turbo (Expander)
The air has to be cooled to sub zero temperatures for liquification & the cryogenic refrigeration & the cooling is provided by highly efficient turbo expander, which cools the air to temperature almost more...
![]()

Nitrogen (N2) constitutes 78.03% of the air. Nitrogen is used in the chemical and petroleum industries for storage tank blanketing and vessel inserting applications. It is also used extensively by the electronics and metals industries.
Liquid nitrogen, produced by the cryogenic air separation process, finds wide use as a refrigerant in applications such as cryogenic grinding of plastics and food freezing. We supply variety of nitrogen gas plants, Liquid nitrogen plants. more...
![]()

We offer anaesthetic gas plants also called anaesthesia plants.
We ensure in every industrial gas plant design that its production capacity is used to its maximum while keeping inputs at minimum without compromising on gas purity, which is always at par with the world standards. We also offer maintenance and training program to our customers while supplying all sorts of workforce to run the plant if and when needed.
Features: more...
![]()

PSA & VSA Oxygen Plants: Molsieve Oxygen System PSA (Pressure Swing Adsorption) and VSA (Vacuum Swing Adsorption) Series an onsite source of low-cost oxygen for lower purity applications. Our Oxygen Plants / Oxygen generators allow you to have your own independent oxygen supply, ideal for remote locations. Not only do they remove the management costs associated with traditional oxygen supplies, but also provide a predictable and economic long-term oxygen cost.
The new range of Molsieve VSA generators will also help keep your costs under control and your productivity high. Molsieve Oxygen Generators use a patented high-efficiency molecular sieve to selectively recover oxygen from air. This high-performance sieve significantly reduces the energy necessary to generate oxygen, making Molsieve Oxygen VSA the low-cost oxygen source for many applications. The wide portfolio of available product line models, coupled with standard options, allows us to configure the product more...
![]()

We offer nitrogen plants of high quality, better performance and durability. The product is widely used to produce, compress, store nitrogen for various purposes. Using PSA process.
The plants are widely used in various industries, which includes following: more...
![]()

Hydrogen can be produced by various methods we offer:
• Knowles type electrolytic cells to produce
• We also offer electrolyser for the same
• Where Nitrogen is not an impurity and where hydrogen is to be used as a reducing atmosphere and where ammonia can be used as a raw material there we offer a hydrogen plant based on ammonia cracking.
Ammonia is cracked in presence of nickel catalyst at approximately 850°c and we get a mixture as these constituents are present in ammonia that is: H2 - 75%, N2 - 25%
Product of NH3 cracking in this ratios can be used for the following purposes:
• Heat treatment in various industries
• For providing reduction and reducing atmosphere in bulk drug manufacture
• Sintered, bimetal, metal powder products
• Stainless Steel wire annealing
• Continuous galvanizing lines
• Brazing furnaces
• Hydrogenation of Castor oil/ non edible more...
![]()

With sound understanding of the market requirements, we are able to offer industrial gas plant and machinery that satisfactorily meet the needs of the clients. We are offering to our clients industrial gas plants also known as transport crayogenic tanks that can offer excellent liquid storage solutions and is suitable for commercial as well as industrial applications.
![]()

We “BDM Cryofusion & Mandressi ITALIA” have been one of the most trusted names catering to the diverse needs of global industrial sectors. Leveraging on our sophisticated R&D unit, we are able to manufacture optimum quality argon recovery plants. Complying with ISO standards, these plants are widely appreciated for trouble free functioning and high tensile strength. Moreover, these plants are equipped with flawlessly designed equipment, which ensure lower cost on installation, operation and maintenance. more...
![]()

Our Gas Chromatograph uses absorption, disorption sampling and injection system for pollution analysis. These gas chromatograph are highly functional and are easy to operate. Provided with rotating plugs, these gas chromatograph are easy to operate and maintain. Our GS uses Pyroliser for plastic and rubber; this helps in increases its efficiency. Additionally, it is also equipped with automatic Head Space sampler for volatiles absorbed in non-volatiles.
Salient Features: more...
![]()

We are one of the leading manufacturers and suppliers of Pressure Electrolysis based Hydrogen Gas Plants. We are well known for their performance, low maintenance cost, safety features and high productivity.
Detailed Description of the Pressure Electrolysis Based Plant
In electrolyzer, symmetrical conductive structure with anode in the middle and cathode at ends avoids the shortage of voltage. The improved sealing washer isolates hydrogen from oxygen. The separator, synthesizer, filter, cooler, cycling pump, tubes and valves are mounted on a skid for easy installation and transportation.
*The main power device is transformer and rectifier. The transformer has power supply with high voltage and the transformer can be made according to different voltage (380V or 10KV). It does transformation by three-phase double-backward star reactant equalizer.
*The trigger of rectifier is in integrated circuit way, and it has protecting interlocking mechanism such as more...
![]()

We have build our VSM auto gas station network which is spread in Gujarat today. In due course of time, we are expanding our network to States of Maharashtra, Andra Pradesh, Madhya Pradesh, Rajasthan, Punjab & Haryana.
Our auto LPG stations in Gujarat are at: more...
![]()

In order to meet the requiremnts of this cutting edge technology, we work on technology of extracting CO2 from biomasses. It has set up serveral plants running on biomasses and demands are pouring. While working on this technology, we are constantly working on design innovations of its plant based on fertilizer gases, breweries and distilleries to extract even more wealth from waste.
Our flue gas plant uses boiler or any furnace flue gas as a raw material thus doing away with costly liquid fuel which is generally costlier in Asian contexts.
The flue and biomass gas plants can be designed in the different capacities ranging from 30kg per hour to 2000kg per hour depending on the available input and client requirement.
Other options may be the plants that run on waste hard coke, nut coke, breeze coke and pearl coke. more...
![]()

We are the leading manufacturers and suppliers of PSA nitrogen plants. Very simple to operate, our PSA nitrogen gas plants produce nitrogen from atmospheric air and therefore the cost of nitrogen generation is very low. Our PSA nitrogen plant is available in two types:
- Lab Scale Nitrogen Plant
- Nitrogen Plant With Booster
Features of PSA Nitrogen Plants:
• Fully automatic start-up by single push button
• Very compact skid mounted units supplied, duly assembled from our factory
• Start-up time only 5-minutes to get nitrogen of desired purity
• No petroleum fuels required - only electrical power and cooling water needed for nitrogen generation
• Life of carbon molecular sieves guaranteed for more than 10 years on continuous operation basis.
Technology:
Our Nitrogen gas plant operate on Pressure Swing Adsorption, commonly known as PSA more...
![]()

Our plants are designed to use industrial bye products as their raw material, which works as a boon for distillaries and breweries, where fermented gases are produced in plenty and otherwise would go waste. We recover odour-free, food grade CO2 from them. Plants themselves are 100% pollution-free causing no environmental imbalances, instead they capture CO2 which otherwise would have been mingled with the environment. Gas quality is guaranteed to be food grade and 99.99% pure in most cases. These plants are not only cost-effective in running but they are most reasonably priced to install too ! In our CO2 production plants based on any fuel burning we can co-produce N2 and distilled water as well.
![]()

Molsieve further offers Hydrogen Plants based on Ammonia Dissociation. These equipment produce mixture of hydrogen and nitrogen and is widely used as pure hydrogen, either in mixture form or hydrogen after further purification. Our such hydrogen systems based on Ammonia Dissociation have been supplied duly approved by Engineers India Limited. Features » Equipment to produce on-site mixture of 75% Hydrogen and 25% Nitrogen by Ammonia Dissocition. more...
![]()

Salient Features more...
![]()

On small scale hydrogen is produced from electrolysis of water in either Knowel’s type Mono Polar Cells or Filter press type Bi-polar cells known as electrolysers.
• Tanks and bells are welded by special quality electrodes to avoid the process embrittling between Hydrogen and Caustic soda.
• Bells are manufactured out off C.R.C. Sheets which are specially recommended for caustic soda handling.
• The Asbestos diaphragm cloth is manufactured from 100% pure long fiber asbestos without cellulose core and closely woven to avoid pin holes.
• Extra length of cloth is provided at the bottom to guard against bye-pass of gases.
• Ebonite Insulators are tested against warping under high temperature and they are checked by meger for infinity resistance.
• Nickelling of Anodes is done under strict supervision for a minimum of .002 thick coarse deposit and each plate is tested chemically for pores.
• There are so many details we more...
![]()

Nitrous Oxide Gas Plants we offer are safe and economical with an efficient N2O generation system and reduces power consumption and improve safety. Nitrogen gas plants is administered with oxygen and used as an anaesthetic gas. Nitrous oxide gas is also known as laughing gas. The N2O gas plants are manufactured in conformity with the industrial standards. N20 is stored in liquid state and can be directly filled into the cylinders. For separation of nitrogen a safety battery assembly is a safety feature. With the increase in standard of living of third world countries nitrous oxide consumption is bound to increase.
Features:
more...
![]()

We design and engineer Hydrogen Gas Plants that are generated by PSA technology and are well known for their performance, low maintenance cost, safety features and high productivity.
In this Hydrogen production plants, purification is achieved by means of pressure swing adsorption (PSA). The hydrogen purification unit consists of 4 adsorber vessels filled with an adsorbent material, basically molecular sieve. During normal operation each adsorber vessel operates in an alternating cycle of adsorption, regeneration and pressure build-up. To get high purity hydrogen gas, a H2 PSA purification unit is included for hydrogen rich gas. Most impurities in the feed gas stream are selectively adsorbed and high purity hydrogen product gas is obtainable.Features:
![]()

Electrolysis of water: The second method that we adopt for manufacturing of gas plants is the process of electrolysis of water. When electric current is passed through water, Water (H2O) is decomposed into Oxygen (O2) and Hydrogen (H2) and this process is known as Electrolysis of Water. Process description: An electrical power source is connected to two electrodes, (its made of some inert metal such as platinum or stainless steel) which are placed in the water. Hydrogen will appear at the cathode. This is the positively charged electrode, where electrons are pumped into the water. Oxygen appears at the anode. This is the negatively charged electrode. In this process, the amount of Hydrogen generated is twice than the amount of Oxygen, and both are proportional to the total electrical charge that was sent through the water. Equations: A reduction reaction is taken place at the negatively charged cathode in the water with electrons from the cathode being given to hydrogen cations to form more...
![]()

Co2 recovery & Regeneration plant , Hot & Cold Insulation , Painting & Sand Blasting work , Mechanical piping & Erection activities.
![]()

We can supply complete LPG Cylinders Manufacturing plant with know how, training the man power, testing machines on turnkey basis.
![]()

Based on the latest technology, our wide range of Carbon Dioxide Plants is known for producing CO2 of high quality and food purity. These are automatically controlled, easy to operate as well as require minimal maintenance. Standard model of CO2 plants that we offer have following units:
![]()
Category Matches
Related Trade Leads
|
We are offering diverse range of gas plants like:
- Carbon Dioxide (CO2, H2 and HO2) Gas plants
- CO2 transportation tankers etc.
* Features... (Sell) |
|
|
We offer gas plants, nitrogen gas plants, oxygen gas plants, psa gas
plants, psa oxygen gas plants, psa nitrogen gas plants, natural gas
plants, in... (Sell) |
|
We keen to set up an industrial and medical gas plant in Bathinda.
we shall be thankful if necessary details may be forwarded to us, at
the earlies... (Buy) |
|
|
We are suppliers & exporters of Industrial, Medical, Calibration &
Mixture Gases, Imported Gases, Dry ice, Liquid nitrogen, Liquid Nitrogen
Contain... (Sell) |
|
|
We are offering to selling of gas plants that include acetylene gas
plants, natural gas plants, oxygen gas plants, ub Series oxygen gas
plants, ubl... (Sell) |
Tender Notifications