Products Directory > Scientific Instruments & Supplies > Measuring Instruments >
Gas Analyzers
Products - 64
|
Gas Analyzers |
Displaying 1-33 of Total 64 Products Found |
-
Products
- Description
- Supplier Information
Small, lingt and roubst
The Micro III is an extremely small instrument cmpared to other detectors. Micro III weigh just 61g & can comfortably fit into a shirt pocket. A built-in clip secures the MICRO III safety to a belt or pocket. The casing is extremely shock and scratch resistant. The protection type IP 56 indicates that the instrucment is sealed against dust and water. The MICRO III use the AQUA-SHIELD (accessory sencor inlet) which ensure that the monitor will provide excellent performance in harsh conditions.
More protection through easier operation
The G201 and the G202 is produced without buttons or switches. Therefore an operating error is completely eliminated.
Plug-in smart sensor
The plug-in smart sensor can be easily replaced. The MICRO III recognizes the new sensor type another measuring gas, detection range, calibration curve, as well as alarm threshold values
Numerous more...- Prism Electronics Private Limited, Mumbai
These are very accurate, reliable, with very rapid response time and do not affected by change in fluid temperature or fluid flow rates. These can be carried anywhere easily and can be connected to nay device easily.
- Airro Engineering Company
Synergy EX proof gas transmeter are certified to be used in Gr.IIA, Gr.IIB hazardous area and has IP 65 protection. It is flexible component system and is used in many industrial processes from chemical, petrochemical,refineries and fertiliser plants. It provides continuous monitoring of oxygen, toxic and combustible gases. It has minimal installation and maintenance requirements. These gas detectors features include optionaly microcontroller based digital display with software calibration. If required EX proof audible and visible alarm can be provided.
- Synergy Technologies, Ahmedabad
We manufacture highly sensitive Industrial Gas Detection Devices. This system helps you to upgrade your safety standards, comply statutory requirements on environmental commitments and most importantly, prevent accidents and protect life & property from disaster.
Features & Advantages:
• It consists of Multi-point gas sensors that are placed in flame proof junction boxes.
• User friendly, simple in design and cost effective to provide the customer with quality and reliable gas sensing at affordable cost.
• Additional sirens, beacon lights are installed on customer's request.
• Designed to detect specific gases like Acetylene, Ammonia, Hydrogen, LNG, LPG etc.
• Add on facilities like automatic pop up alert message on process PC, remote audio alarm in security control room using wireless transmission etc.
How It Works:
All sensors are connected to a centralized processing cum display unit where an audio output, visual activation of more...- Paartha Electronics.
Our reliable and quality oxygen analyzers with special features like digital display, easy calibration, and long life sensors are portable and on-line gas analyzers that are used to monitor performance of gas generators. It is a sealed electrochemical fuel cell that generates signal in direct linear proportion to the oxygen concentration in the sample stream. It requires no periodic maintenance like replacing electrodes or electrolytes and can be easily calibrated.
- Airro Engineering Company
We offer XP 326ALA/ALB, which is a high performance gas detection equipment used to measure the concentration of oxygen. This is a diffusion type gas detection system that works on the principle of galvanic cell. Available at competitive prices, this equipment has been designed as per the market standards and norms and has found uses in various applications.
more...- Prism Electronics Private Limited, Mumbai
These days, cost effective and non-polluting fuel LPG/LNG/CNG is widely used in automobiles. It is not only highly economical for the user but also saves the country's economy and is eco-friendly. But their usage involves fair amount of precaution as well, because gas leakage can lead to fatal accidents. Citing this, we bring you Auto Gas Leak Detection System that provides absolute safety for Gas Converted Vehicles.
How It Works:
The Sensing Module is installed near the gas source and the Alarm Unit near the driver panel. In case of leakage of gas, the buzzer sound alerts the driver and passengers. The special feature of this unit is that it will automatically cut off the gas supply from source in addition to the alarm. This ensures total safety.
Technical Specifications:
more...- Paartha Electronics.
Membrapor Switzerland Gas Sensor.
Synergy Technologies are the official distributors of Membrapor AG Switzerland gas sensors. They offer a wide range of toxic gas sensors like, CO, NH3, H2S, SO2, NO, NO2,Cl2, HCl, H2, PH3, SiH4, O3, C2Cl4, ETO, CO2, O2 etc. It can match many practical applications of gas monitoring. The sensors are having a cylindrical body and a rounded face and are used for sensing a gas diffused through sensor membrane. It includes counter and sensing electrodes and an intervening body of electrolyte with electrodes and is used to control the diffusion of gas to the sensing electrode. more...- Synergy Technologies, Ahmedabad
Small, light and robust more...
- Prism Electronics Private Limited, Mumbai
We manufacture highly sensitive Domestic Gas Detection-Gas Leak alarm , made especially for household kitchens that can save your life and property from a possible gas disaster.
Features & Benefits:
•It is an advanced, compact electronic unit that can detect LP Gas leak and activates the alarm that alerts people for gas leak, making homes a “safe zone”.
•It has a hi-tech sensor with high reliability, sensibility, longevity with design of low electric current (200 MA)
•The alarm is known for its continuous operation regardless of variation in temperature and humidity.
Technical Specifications:
more...- Paartha Electronics.
We design & engineer accurate Portable Gas Detection System. It comes with the following features and benefits:
Feature & Advantages:
•It is designed for single handed operation and is light weight, available in a convenient carrying case.
•Flexible long goose neck sensor tube for easy access to probable leak area.
•Fast initial warm up (30 seconds) and quick response (5 seconds) time makes accurate & early detection.
•Distinctive buzzer and light for gas leak and different audio tone and light for low battery warning.
•Works on rechargeable Nickel Cadmium battery pack, battery charger is standard accessory.
Application:
It is used for fast and reliable spot detection of gas leakage in pipelines, joint flanges, valve banks, gas ducts and safety inspection of storage areas.
Technical Specifications: more...- Paartha Electronics.
XPS 7 is a high performance extractive type gas detecting equipment that can be used to detect semiconductor-manufacturing gases. The system works on the principle of electrochemical cell and delivers flawless performance with optimum accuracy and reliability. The detection range depends on the specifications and requirements.
more...- Prism Electronics Private Limited, Mumbai
XP 702 is an extractive type combustible gas detector that works on the principle of hot wire semiconductor. Based on latest technology, the device offers flawless performance with high standards of accuracy and reliability. Light in weight and compact in structure, XP 702 is available at industry leading prices.
more...- Prism Electronics Private Limited, Mumbai
Designed as per IS Standard.
VEEKAY Halogen Acid Gas Tester for determination of the amount of halogen acid gas other than hydrofluoric acid evolved during the combustion of compounds based on halogenated polymers and compounds containing halogenated additives taken from cable insulation and outer sheath.
Tube furnace with digital temperature controller up to 1200 degree.
Quartz Tube, Quartz Boat, Flow Meter and 3 nos. of Wash Bottles provided along with the machine.- Veekay Testlabs
We provide our clients with most precision and reliable toxic gas analyzer. The product finds applications in following fields :
Ø Bio Technology
Ø Combustion Efficiency Studies
Ø Human Occupancy & Safety
Ø Food and Beverages packing
Ø Pollution Monitoring
Ø Research & Development
Salient features of Toxic Gas Analyser :
Ø Easy to read Display / Fast Response
Ø Hand held Instrument
Ø Small & Light Weight
Ø Low Battery Indicator
Ø Audible / Visual Alarm (optional)
Ø Sensor, disposable Electo Chemical
more...- Hemaki
Model TCM % 02, CO &°C Flue Gas Monitor
The TECHNOVATION Combustion Monitor Model TCM is a small portable battery powered gas analyser measuring °C Oxygen, Carbon Monoxide readings displayed on 3 1/2 digit 12mm high LCD. The probe for temperature and gas is a single combined probe with a filter and cooler. A rubber connecting hose is provided to connect it to the instrument. %efficiency tables are provided for various common fuel.
Series 89 Portable / Fixed Point Toxic Gas Analysers
TECHNOVATION Toxic Gas Analysers Series 89 accurately measure the concentration of a particular gas in parts per million (ppm). These analysers may be used as a DESK-TOP Model or Panel-Mountable. These toxic gas analysers use electrochemical sensors which have an enviable reputation for reliability, stability and rugged design having an electrical output linearly proportional to concentration level of the gas. Ambient air monitoring can be done continuously.
Series 90 more...- Technovation Analytical Instruments Pvt Ltd
The portable gas analysers we manufacture have got application in detecting leakage of any gas as well as checking the pollution level in various industries. The other products we offer under this category include : more...
- Rajpriya Instruments And Controls
The A/C service equipment offered by us is available at competitive prices. Following are the features of our A/C Service Equipment are: more...
- Addisplay Equipment P. Ltd.
Sailent Features: more...
- Sunrise Systems & Instruments
FEM consists of 3 types of portable microprocessor-based fuel efficiency monitors. They are as cited below: FEM-1 measures %O2 and C. FEM-2 measures O2, °C and CO. FEM-5 measures O2°C, CO, SO2, NO & NO2. The microprocessor calculates values of percentage combustion efficiency i.e. net & gross, percentage carbon dioxide and percentage excess air for types of fuel. The microprocessor and architecture ensures the simplicity in use, trouble-free performances, cost-effectiveness and reliability. The analysis data is displayed on a 16 x 2 LC alphanumeric display. Series FEM incorporates microprocessor key controls that are fully menu driven. Stored data can be viewed or downloaded to a computer or can also be printed out by an external printer. A built-in pump draws fluegas through the probe. The instrument works on an in-built rechargeable battery and recharged on 220 VAC mains supply. more...
- Technoplus Services
Nutech Air Projects suppliers of gas analyzer instruments, user friendly hand held gas detectors. The detectors are low cost, light weight and are battery operated. These units has been indigenously designed for Indian conditions. These analyzers are broadly classified as 'Combustible Gas Monitors' Also known as Toxic Gas Detectors or Multi Gas Monitors. Salient Features : more...
- Nutech Air Projects
We are also dealing with sensor and gas analyzers for the following gases: Oxygen, Hydrogen, CO and CO2. These gas analyzers are in ready stock.
- Prithvi Engineering Enterprises
More Features for Improved Performance
The ZX-101XL's Delron sense head makes it easy to firmly seat and position the sample holder in the instrument making field tests faster and smoother.The ZX-101XL's two piece sealed optical filter tray extends
the life of the optical filter and increases wave length stability.
The ZX-101XL offers Automatic Fuel Selection, enabling it to detect the type of
fuel being analyzed and reducing potential operator error.
The ZX-101XL offers an optional GPS locator allowing personnel to document and verify the time and location of each analysis.- A-Grain (India)
Carbon Dioxide Transmitter Series more...
- Mecord Systems & Services Private Limited
We provide our clients with most precision and reliable Binary gas analyzer. The product finds applications in following ways :
Ø Binary gas Analyser for on-line indication for gas mixtures likeAr/N2,Ar/He,Ar/H2,Ar/Co2 and any other combination of two different gases.
Ø On-line gas purity/total impurity analyser with resolution 0.1% (for Hydrogen & Helium0.01%)
Features :
Ø Four Filament TCD (impoted) Diffusion type.
Ø Change over value for sample and reference.
Ø Two needle valves and rota meter for Gas Flow Controls.
Electronic Control Panel :
Ø Digital Display 31/2 LED with 0.1% resolution
Ø Zero & Span (or two point) control for calibration to get direct read out of % selection
Ø Switch for % or mA current indication.
Ø Filament temp control with overload protection saves filements.
Ø Current is adjusted automatically as per composition gas.
Ø Recorder out put more...- Hemaki
Series 94 These Single Point Wall Mounted Instruments work on 220 VAC mains supply and have a sensor fitted at the end of a cable. They use an IP 55 enclosure for the electronics as standard. The sensor is located at the site to be monitored and the monitor electronics in a safe area/instrumentation room. They are provided with two alarms both audible and visual along with relays and recorder output of 0-1 V and 4-20 mA. They are meant for continuous operation of area monitoring with continuous read out, plus vital status indicators.
more...- Technovation Analytical Instruments Pvt Ltd
Following are the features of the ARAI Approved 4 gas analyser: more...
- Addisplay Equipment P. Ltd.
The Hemaki Model - OM WMSP 100 Online Flue Gas Analyser is specifically designed for use on flue gases from combustion process burning clean gaseous flues. Alternatively, it can measure sample gases from oil or coal fired processes with additional heated sample filter.
Sample gas is drawn into the analyzer from the sampling probe or heated filter through a water or air cooled condensor by the built in sampling pump. any liquid formed in the condensor falls into the condensate trap. Next, the sample gas is filtered again then flows through a 5 way calibration gas valve, flow meter than onto gas detectors.
more...- Hemaki
The TECHNOVATION Oxygen & Temperature indicator Model OTI is a small low cost portable, lightweight, Ni/Cd rechargeable battery operated flue gas analyser measuring oxygen in the range of 0- 25% in steps of 0.1 % and temperature from 0- 500°C in steps of 1°C. Flue-gases are conveniently educted by an internal pump through a detachable probe 600 mm long. The instrument can be conveniently handheld being lightweight. Model OTI is supplied with carrying cases for convenience & portability.Percentage combustion efficiency tables are provided for oil,coal&gas fuels.
more...- Technovation Analytical Instruments Pvt Ltd
We offer the high precision and reliable Gas analysers which analyses the mixture of gases. We provide our clients a large series of gas analysers which are as follows :
Ø TCD BINARY GAS ANALYSER / GAS PURITY ANALYSER
Ø Oxygen Meter - % level OMPC (0.1% resolution
Ø Oxygen Meter - PPM level OMPM (1 ppm resolution)
Ø Oxygen Meter - Portable PPM
Ø Oxygen Meter - % Portable (Handled)
Ø Toxic Gas - ppm level Portable (handheld)
Ø Dew Point Meter : Measures moisture in air or gas samples, Range - 20°C to -100°C, Dew point.
Ø CO2 in fluegas analyser for boiler fuel efficiency : The method of measurement used is that of Katherometer. Sampling system - Water Aspirator or Suction Pump. more...- Hemaki
Mini-Oxymeter Series 11 is intrinsically safe and measures % oxygen (O2) in air. No battery power is required to drive the galvanometer and therefore no spark can be generated whatsoever, hence intrinsically safe. A scale 0-25% with 0-19.5% shown red which range is hazardous to personal safety in confined spaces due to insufficiency of O2 (Oxygen) for breathing.
Series 2000 is a personal safety monitor which is small, lightweight, versatile and certified for intrinsic safety. It is durable and hard enough for use in harsh environments. Some of its unique features are STEL, TWA readings which are viewable and an LED indication for menu operation and confidence beep.
Series 8720 offer personal gas alarms for specific toxic gases. They are provided with a beltclip or a neckstrap for handsfree use and work on a 9 volts disposable dry cell. They have two alarms both audible and visual and low battery indication. SERIES 8720 are fitted with highly reliable & more...- Technovation Analytical Instruments Pvt Ltd
We carry an extensive range of various oxygen meters. The product is specially designed for accurate & reliable measurement of Oxygen in Air, Hydrogen, Nitrogen, Argon etc. It is based on Galvanic Oxygen Sensors to impart fast response. Few of its salient features are as follows:
Ø No periodic maintenance required
Ø Digital LED display
Ø Highly Reliable
Common Application Areas :
Ø Gas purity check
Ø Oxygen Plant
Ø Gas separation Plant
Ø Cylinder filing
Ø Inert Gas Purging
The range of oxygen meters available with us include :
Ø Oxygen Meter - % level OMPC (0.1% resolution)
Ø Oxygen Meter - % Portable (Handled)
Ø Oxygen Meter - PPM level OMPM (1 ppm resolution)
The domain of oxygen meters is offered by us in various specifications and each product has its own unique features, application areas and specifications.- Hemaki
Model AS-2 General Purpose Air Sampler
Model AS2 consists of a mini pump driven by a D.C. motor working on a 6 volt rechargeable battery.These work continuously for up to 10 hours between charging. If required, the air sampler can be used, while charging by 220 V AC mains supply.The screw arrangement allows variation of flow rates between 0.5 and 3.0 litres/minute. A flow meter is mounted on the face of the box. Pulsation dampers are internally fitted on the inlet and outlet gas circuit to smoothen the air flow. The pump unit is fitted into a M.S. case of compact size. The sampler unit can be kept on a flat surface for stability at the breathing zone level of the worker to take TWA - TL V (8 hour) measurements. The air sampler is supplied with battery charger in a carrying case.
Model ECIR-1 Electrochemical & Infrared Combo Analysers
PROCESS PARAMETERS
The TECHNOVATION Model ECIR-1 is a dual gas analyser measuring % Oxygen, and an energy absorbing gases more...- Technovation Analytical Instruments Pvt Ltd
